Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹79,424.57Accepted-AOC NUTANDIH COOPERATIVE COLONY SARAIDHELA DHANBAD JHARKHAND 828127 | DHANBAD | DHANBAD | JHARKHAND | 828127 | ₹79,424.57 | L-1 | Accepted-AOC L-1 bidder |
| 2 | L-2₹1.1 L+₹32,498.67 (40.9%)Rejected-Finance AT BHULI B BLOCK BHULI SUB POST OFFICE BHULI ROAD NEAR SHIV MANDIR BHULI PO BHULI DHANBAD 828104 | DHANBAD | DHANBAD | JHARKHAND | 828104 | ₹1.1 L+₹32,498.67 (40.9%) | L-2 | Rejected-Finance L-2 bidder |
| 3 | L-3₹1.3 L+₹49,056.35 (61.8%)Rejected-Finance H NO 114 TELIPARA HIRAPUR NEAR BSNL TOWER DHANBAD 826001 | DHANBAD | DHANBAD | JHARKHAND | 826001 | ₹1.3 L+₹49,056.35 (61.8%) | L-3 | Rejected-Finance L-3 bidder |
Tender Value
₹1.9 L
EMD Value
₹2,400
Closing Date
17 Aug 2026, 5:00 pmClosed
GM (Civil/Welfare)
Office of GM Civil, CED HQ, BCCL, Koyla Nagar
Repair and Maintenance of Dispensary including Repair of Boundary wall at karmic nagar under JNTA.
2026_BCCL_363126_1
BCCL/CED/TC/eNIT-11/26-27/322 dated 05.08.2026
Open Tender
Civil Works - Others
Percentage
28 days
Jagjiwan Nagar
As per NIT
3 documents required · 3 mandatory
₹2,400
15 Sept 2026
5 Aug 2026
19 Aug 2026
5 Aug 2026
17 Aug 2026
6 Aug 2026
5 Aug 2026 - 10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | - | cum | 214.15 | - |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | - | cum | 1,292.2 | - |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources). | - | cum | 5,592.8 | - |
| 4 | Brickwork with non modular fly ash bricks conforming to IS:12894 of class designation 10 in foundation and plinth in cement mortar 1:6 (1cement:6 coarse sand) | 1 | cum | 5,174.17 | ₹5,169 |
| 5 | Brickwork with clay flyash F.P.S( non modular ) brick of class designation 10 in superstructure above plinth level :cement mortar 1:6 (1cement:6 coarse sand) | 1 | cum | 5,546.92 | ₹5,541.37 |
| 6 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | - | sqm | 222 | - |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 1 | sqm | 68.3 | ₹68.23 |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | 398 | - |
| 9 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | sqm | 872.05 | ₹871.18 |
| 10 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading | 1 | sqm | 1,301.35 | ₹1,300.05 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_376050.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.66 MB
BOQ_376050.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .