REPAIRS TO DRAINS PATH CHAINLINK FENCING HARDSTANDING AND OTHER SIMILAR WORK IN CERTAIN MD OTM ACCN AT CDM UNDER AGE BR (N) NO II OF GE (N) SECUNDERABAD

Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work otherwise specifically provided for roof treatment including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed

M & L Brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

M & L 40 mm thick PCC (1:2:4) type B0 (by using 12.50mm graded stone aggregate) as in roof where require over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and directed.

M & L Water proof plastering 10mm thick CM (1:3) with WPC @3% by weight of cement on fair faces of brick work or concrete or roof terrace surfaces in including finishing the surfaces complete all as specified and directed.

Supply only Integral waterproofing compound for waterproof plastering complete all as specified and directed.

M & L Priming the plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm and laying the APP water proofing membrane of minimum 3 mm thick and weighing not less than 3.0 Kg/Sqm reinforced with non woven Polyester /HMHDPE matt black finished over compatible primer/bonding bitumen with overlaps of minimum of 100 mm at side laps and minimum of 150mm at end laps after necessary preparation of surface complete as per manufacturer’s instructions with bituminous aluminium paint on top @ 0.1Ltr/Sqm complete all as specified and directed.

S & F in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and directed.

Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning size of tank exc. 250 Ltrs & n. exc. 500 Ltrs capacity of tankcomplete all as specified and directed.

All as per Item No.9 above,but size of tank exc 500 Ltrs & n exc 1000 Ltrs capacity

All as per Item No.9 above,but size of tank exc 1000 Ltrs & n exc 2000 Ltrs capacity

S & F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 210 gms)

All as per Item No.12 above,but size 25 mm (Minimum weight 455 gms)

S & F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary CPVC/GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore PTMT/Brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank all as specified and directed. Cat Part No: HSWS-0050-02- Pure of M/S Syntax

All as above item No 14 above,but tank of size 1000 Litres. Cat Part No: HSWS-0100-01- Pure of M/S Syntax

Taking down & refixing of existing GI tubing of any dia in any position (walls, floor, ceiling etc) in old/new position including cleaning with all fittings short pieces complete all as specified and directed.

S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down existing userviceable tubing complete all as specified and directed

S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down existing userviceable tubingcomplete all as specified and directed

Taking down eaves gutters and rainwater Pipes (any size or Pattern) including all fittings complete all as specified and directed.

S & F PVC (SWR) pipe 110 mm bore double socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F PVC (SWR) pipe 75 mm bore double socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F for PVC (SWR) pipe 110 mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F for PVC (SWR) pipe 75 mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

S & F in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed.

S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..

S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..

S & F in repairs 110 mm bore PVC (SWR) door bends any radius complete all as specified and directed

S & F in repairs 75 mm bore PVC (SWR) door bends any radius complete all as specified and directed

S & F in repairs 110 mm bore PVC (SWR) vent cowl any radius complete all as specified and directed

S & F in repairs 75 mm bore PVC (SWR) vent cowl any radius complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Brick work with fly ash bricks straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM (1:6) complete all as specified and as directed.

M & L for Precast solid cement concrete block masonry of type C-1 (1:3:6) (using 20mm graded stone aggregate) in CM (1:6) including demolition of precast concrete block walling built in cement mortar complete all as specified and directed.

M & L Walling of random rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) including demolition of random rubble walling built in cement mortar complete all as specified and as directed.

M & L Rendering 15mm thick CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.complete all as specified and as directed.

M & L Flush pointing to random rubble masonry uncoursed or brought upto courses in CM (1:4) complete all as specified and directed.

M & L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in coping including necessary use and waste of formwork and finishing exposed concrete surfaces fair and even and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base including demolition of existing concrete complete all as specified and as directed.

M & L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base including demolition of existing concrete complete all as specified and as directed.

M & L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channels and drains including demolition of existing concrete complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness cincluding removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, and finished even and smooth without using extra cement complete all as specified an directed

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, all as specified and directed.

M & L Textured heavy duty exterior ceramic tiles of size 300mmx 300mmx 10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L Designer coloured glossy chequered cement concrete tiles of size 30cm x 30cm x 25mm thick in floor, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in Hard/Dense soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm,watering and removing surplus soil outside MD land complete all as specified and directed.

M & L Providing PCC (1:3:6) type C1 (using 20mm graded stone aggregates) as in post holes complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc. ) sheets in roof coverings complete all as specified and as directed.

S & F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S & F Rolled section as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates confirming to Fe-410-W.Gde E-250 ,Quality ' A ' complete all as specified and directed.

S & F Rolled hollow sections Fe-410- W(Gde-E-250) quality-A etc as in stanctions/ vertical column fixed with base plates or other connecting plates etc complete all as specified and as directed.

S & F MS plate 8mm to 12 mm thick plain Fe-410- W(Gde-E-250) quality-A, cut to shape forming holes and welded to truss and verticle post as base plate all as required.

S & F Mild steel screw bolts (machine made), diameter of shank 16 to 20 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, Each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm and n exc 15 cm long all as specified and directed.

S & F Mild steel screw bolts (machine made), diameter of shank 16 to 20 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, Each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm and n exc 45 cm long all as specified and directed.

M & L fo repairs of Steel gate of any size , any shape and any position by taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller, repair and repositioning of Base Rail , make in true position to revolve complete all as specified and directed by Engr- in - Charge.

M & L repairs of steel rolling shutter of any size , any type and any position by repair/greasing to roller, repair of Base Rail, make in true position to revolve complete all as specified and directed.

S & F in repairs 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, complete all as specified and directed

S & F in repairs push pull or manual type Steel rolling shutters of laths thickness 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and directed.

S & F in repairs gear operated type Steel rolling shutters with bevel gear box and crank handle of laths thickness 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and directed.

S & F in repairs gear operated type Steel rolling shutters with with chain wheel and hand chain of laths thickness 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and directed.

S & F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F in repairs Ball bearing for rolling shutters complete all as specified and directed.

M & L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.