Tender ID

Kerala

Cancelled

Works

Electrical Works

GENERAL- 29th JCB action plan - SITC of 15 KVA DG set and electrification for Siruvani Dam

Irrigation Department

Palakkayam | Palakkad, Kerala

Amount: ₹10.0 LCloses: 9 Mar 2026Closed

Timeline

Published2 Mar 2026
Closed9 Mar 2026
Cancelled—

Corrigenda

Corrigendum

2 updatesLatest on 10 Mar 2026Submission Ends:9 Mar 202612 Mar 2026

Date changes

Download Ends9 Mar 202612 Mar 2026Submission Ends9 Mar 202612 Mar 2026Bid Opening11 Mar 202616 Mar 2026

Tender Value

₹10.0 L

EMD Value

₹24,878

Closing Date

9 Mar 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

Assistant Executive Engineer,SP DWS Subdivision No.1,Siruvani sagar,Palkkayam

Work Description

GENERAL- 29th JCB action plan - SITC of 15 KVA DG set and electrification for Siruvani Dam - Installation of DG set and electrification for River Sluice - Emergency shutter at Siruvani Dam -General Electrical Work

Tender Information

Tender ID

2026_Irrig_842434_1

Reference Number

IRR/PI/18594/2025-2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Palakkayam

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Pls refer tender documents

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical/Finance

RequiredBid Security remittence (.pdf)

RequiredBid submission letter as per item no-1 Part VI (.pdf)

RequiredIntegrity pact certificate as per item no-3 part VI (.pdf)

RequiredPreliminary agreement as per item no-2 Part VI (.pdf)

RequiredRequisition for e- payment as per item no-6 Part VI (.pdf)

RequiredAffidavit as per item no-4 part VI (.pdf)

RequiredBidder valid registration certificate (.pdf)

RequiredBid documents with NIT (.pdf)

RequiredBid submission fee remittence (.pdf)

RequiredBoq (.xls)

RequiredSpecial conditions (.pdf)

RequiredMake of materials (.pdf)

Fee & Financial Details

Tender Fee Amount

₹2,195

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹24,878

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

9 Mar 2026

Published

2 Mar 2026

Bid Opening

11 Mar 2026

Download Starts

2 Mar 2026

Download Ends

9 Mar 2026

Submission Starts

2 Mar 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (78 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SITC of 15 KVA DG set and panel board
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	18	sqm	-	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	0.5	sqm	-	-
1.003	90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet	30	metre	-	-
1.004	90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)	5	metre	-	-
1.005	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	150	kg	-	-
1.006	OD264047/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.-	300	kg	-	-
1.007	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	2,500	Cum cm	-	-
1.008	90.14.7:Supply and providing copper earth bus in the panel board	1,000	Cum cm	-	-
1.009	OD338294/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1	1	each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

BOQ_1421479.xls

BOQ • 0.36 MB

SPECIALCONDITIONS.pdf

Additional Documents • 0.03 MB

viewsbd.pdf

Tender Documents • 1.64 MB

Makeofmaterials.pdf

Additional Documents • 0.02 MB

viewnit.pdf

Tender Documents • 0.03 MB

Corrigendum Documents

CORRIGENDUM.pdf

PDF • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SITC of 15 KVA DG set and panel board
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	18	sqm	-	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	0.5	sqm	-	-
1.003	90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet	30	metre	-	-
1.004	90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)	5	metre	-	-
1.005	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	150	kg	-	-
1.006	OD264047/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.-	300	kg	-	-
1.007	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	2,500	Cum cm	-	-
1.008	90.14.7:Supply and providing copper earth bus in the panel board	1,000	Cum cm	-	-
1.009	OD338294/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1	1	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1SITC of 15 KVA DG set and panel board

1.001

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

sqm

1.002

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

0.5

sqm

1.003

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

metre

1.004

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

metre

1.005

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

150

1.006

OD264047/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.-

300

1.007

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

2,500

Cum cm

1.008

90.14.7:Supply and providing copper earth bus in the panel board

1,000

Cum cm

1.009

OD338294/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1

each