Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-AOC GRAM BHANGLOLI POST SURANGANI TEHSIL SALOONI DISTRICT CHAMBA HIMACHAL PRADESH 176317 | SURANGANI | CHAMBA | HIMACHAL PRADESH | 176317 | L1 | Accepted-AOC Quoted rates are lowest | |
| 2 | L2₹3.9 L+₹13,156 (3.47%)Rejected-Finance | L2 | Rejected-Finance Quoted rates are higher |
Tender Value
₹4.2 L
EMD Value
₹8,361
Closing Date
4 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer IIT Mandi
Superintending Engineer IIT Mandi
Providing and fixing of Vertical blinds in A-13 building at North Campus of IIT Mandi.
2023_IITMD_773384_1
IIT Mandi (CW)/SE-1457/2023-24/3880-82 dt.25.09.23
Open Tender
Civil Works
Item Rate
30 days
North campus of IIT Mandi
Please refer to NIT
2 documents required · 2 mandatory
₹1,180
The Registrar IIT Mandi
₹8,361
19 Dec 2023
27 Sept 2023
6 Oct 2023
27 Sept 2023
4 Oct 2023
27 Sept 2023
27 Sept 2023 - 3 Oct 2023
Amount
Providing and Fixing of Vertical Blinds complete with all components, including drilling holes in wood work/RCC and installation at site. Vertical blinds will have following specifications- Vertical Blinds with vertical vanes in widths of 100mm. Light regulation by tilting the slats, opening and closing of the hanging by moving the slats. Hanging bundles 1-piece left or right, several pieces left and right or central. Head rail : Made of extruded aluminium (AIMgSi 0.5 F22), width 45mm, height 25mm. Standard colours silver anodised E6/EV1 (100) or white powder coated.Tilt rod : Made of extruded aluminium (AIMgSi 0.5 F25), torsion proof slotted rod Ø 6mm. Slat traveller : Made of wear-resistant plastic with prelubricated rollers, gear with integrated safety cluch (damage impossible) 180° slat tilting. Protection of slat by automatic swivel and return function, automatic slat alignment when tilting, if necessary. Slat : 100mm wide, vanes made of textile fabric with PU coated lamination. Bottom chain :Made by plastic beads and bottom weight lock on polyester cord for insertion of bottom weight. Wall Bracket : Visible mounting adjestable wall bracket made by MS, silver or white powder coated. Celling Bracket : Made by S.S spring steel. All work complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / pC.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion, Powder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing aluminium handles, ISI marked, powder coated (coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 200mm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing aluminium tower bolts, ISI marked, powder coated (coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.200 x 10 mm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.
CHANDAN PRAKASH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .