Construction of New Government Girls Hostel (160 Capacity), Dinning Hall (160 Capacity) and Staff Quarters at Kalarani Ta. Pavi Jetpur Dist. Chhotaudepur

Construction of New Government Girls Hostel (160 Capacity), Dinning Hall (160 Capacity) and Staff

Quarters at Kalarani, Ta: Pavi Jetpur Dist. Chhotaudepur.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including sorting 3738.00 Cumt 125.86

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m 2133.00 Cumt 174.56

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 20 cm. 598.00 Cumt 489.28

Thickness including watering ramming and consolidating

4 Filling available excavated Earth (Excluding Rock) in trench 1953.00 Cumt 137.47

plinth side of foundation . in layer not excluding 20 cm in

depth consolidation each deposited layer by ramming and

watering etc. complete

5 Filling foundation and plinth with murrum or selected soil in 1119.00 Cumt 304.60

layer of 20 cm in thickness including ramming watering and

consolidating etc. complete

6 Anti Termite System 1978.00 Sqmt 134.33

P/L of Permenent piping technology Anti Termite treatment

before flooring work by installing LLDP (Low linear density

Polyethylene) tube of 8 mm O.D.& 6.4 mm I.D.With in Built

Pressure Compenstaion chif every 30 cm interval in the tube,

having working pressure of 2 kg/cm 2 and realese rate of

ltr/Hour fixed by P-Clip and nails . The LLDP pipe shall be

installed at the entire periphery of the building and at

internal network of building depth of 20 to 200 mm under

floor every 2 to 3 mtr.c/c distance (adjustble as per building

layout ) & Ends of loop pass through a PVC Elbow of

minmum 32 mm ID at junction box of wall and floor level,

entring into a steel reinforcmed grooved flexible pipe

mini.22 mm LD leading into junction box and during

injecting chemicls for termite control tretment. The anti-

termite chemical Lmidcloprid 30.5% SC Mix as per IS

6313(part-III) shall be injected by the pressure pump diluted

with water @ 10.5 ml/5ltr of water at the rate of

kg/sq,cm.@ 5 ltr /Smt .the contractor shall submit approved

line plan for piping system and junction boxes dully

approved By Engineer -in-charge with bond of 5 Years

7 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 142.00 Cumt 3106.67

coarse sand : 6- machine cut stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Item Description of Item Quantity Unit Rate In Amount

8 Providing and laying controlled cement concrete M150 for 501.00 Cumt 4127.06

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns, Plinth Slab and Mass

9 Providing and laying controlled cement concrete M250 and 958.00 Cumt 4554.19

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (A)

Foundations, footings and Mass concrete.

10 Providing and laying controlled cement concrete M250 and 78.00 Cumt 7388.45

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

11 Providing and laying controlled cement concrete M200 and 207.00 Cumt 7316.34

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Floor Two Level

12 Providing and laying controlled cement concrete M200 and 28.00 Cumt 7356.75

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Second Floor

13 Providing and laying controlled cement concrete M250 and 543.00 Cumt 6194.33

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Ground & Plinth BEAMS

14 Providing and laying controlled cement concrete M150 and 332.00 Cumt 5276.54

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

15 Providing and laying controlled cement concrete M200 and 364.00 Cumt 6158.89

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Floor Two Level Beams

16 Providing and laying controlled cement concrete M200 and 28.00 Cumt 6199.30

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Second Floor Beams

17 Providing and laying controlled cement concrete M200 and 15.70 Cumt 6350.99

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C) Chhajja

for Floor Two Level

18 Providing and laying controlled cement concrete M200 and 1.70 Cumt 6391.40

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C) Chhajja

for Second Floor

19 Providing and laying controlled cement concrete M200 and 15.30 Cumt 7520.97

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C) Lintal for

Floor Two Level

Item Description of Item Quantity Unit Rate In Amount

20 Providing and laying controlled cement concrete M200 and 2.10 Cumt 7561.38

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C) Lintal for

21 Providing and laying controlled cement concrete M200 and 600.00 Cumt 6688.22

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Floor Two Level Slab

22 Providing and laying controlled cement concrete M200 and 36.00 Cumt 6728.63

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Second Floor Slab

23 Providing and laying controlled cement concrete M200 and 41.00 Cumt 8408.83

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in (E) Stair

case for Floor Two Level

24 Providing and laying controlled cement concrete M200 and 123.80 Cumt 8258.02

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in RCC

Vertical and Horizontal wall for Floor Two Level

25 Providing and laying controlled cement concrete M200 and 41.70 Cumt 8298.43

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in RCC

Vertical and Horizontal wall for Second Floor

26 Providing and laying controlled cement concrete M200 for 32.40 Cumt 6407.80

RCC work and curing complete including the cost of form

work but excluding the cost of reinforced concrete work in

Coping on Floor Two Level

27 Providing and laying controlled cement concrete M200 for 22.49 Cumt 6448.21

RCC work and curing complete including the cost of form

work but excluding the cost of reinforced concrete work in

Coping on Second Floor

28 Providing IS Mark TMT FE 500D bar reinforcement for RCC 417550.32 Kg 77.36

work including bending & placing in position complete up to

All floor Level

29 Providing and fixing 90 cm Height Stainless Steel Railing 151.00 Rmt 3626.51

made from anticorrocive 304 grade S S pipe of 50 mm dia

(16 Gauge) as hand rail with S S 304 grade Baluster of

mm dia Box pipe (16 Gauge) as a vertical support fixed in

RCC slab at 1.2m c/c including three horizontal S S pipes of

25 mm dia (16 Gauge) at eqal distance fixed by 18.75 mm dia

(16 Gauge) S S pipe with baluster including accessories as

per detailed drawing as directed etc. complete.

30 Providing, laying and fixing 45 cm Height MS Railing made 578.00 Rmt 811.43

from anticorrocive up of RCC Perapet Wall on fixing Hand

Railing 50 mm dia (16 Gauge) MS Round Hollow pipe

horizontal 3 Nos and 35mm dia vertical connection pipe

No with all material , laboure charges and accessories as per

requirement as directed by Engineer-in-charge etc.

Item Description of Item Quantity Unit Rate In Amount

31 Brick work using common burnt clay building bricks having 232.00 Cumt 4279.98

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional below plinth

32 Brick work using common burnt clay building bricks having 1195.00 Cumt 4568.40

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional Floor Two Level

33 Brick work using common burnt clay building bricks having 122.00 Cumt 4611.49

crushing strength not less than 35 kg./Sq.Cm. in super

structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional Second FLoor

34 Half Brick masonry in common brunt clay building bricks 1058.00 Sqmt 696.50

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super structure.

for Floor Two Level

35 Half Brick masonry in common brunt clay building bricks 518.00 Sqmt 702.90

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super structure.

for Second Floor.

36 Providing and fixing 150 mm wide, approved quality chicken 970.00 Sqmt 295.12

wire mesh at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs

or tag by cement mortar 1:3 before applying the plaster,

including curing, scaffolding all complete as directed.

37 Providing 20 mm thick double coat mala cement plaster on 6512.00 Sqmt 298.33

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing, 10x10 mm

grooves etc. complete. For Floor Two Level

38 Providing 20 mm thick double coat mala cement plaster on 1131.00 Sqmt 324.65

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing, 10x10 mm

grooves etc. complete. For Second Floor

39 Providing 10 mm. Thick cement plaster in single coat for 3666.00 Sqmt 166.34

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

including Mala troveled finish etc. complete. Floor Two Level

Item Description of Item Quantity Unit Rate In Amount

40 Providing 10 mm. Thick cement plaster in single coat for 234.00 Sqmt 186.58

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

including Mala troveled finish etc. complete. Second Floor

41 20 mm thick Sand faced cement plaster with 18x8 mm 7474.00 Sqmt 407.94

grooves as suggested by this office consisting of 12 mm thick

backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand ) and

mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse

sand) for all heights as directed etc. complete. and as per

pattern sample aprroved by the architect or directed

engineer in-charge

42 Providing throating or plaster drip and moulding to R.C.C. 390.00 Rmt 44.07

43 Providing and fixing eco-friendly light weight calcium 42.00 Sqmt 1674.15

silicate false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation.

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/ Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24 X 38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24 X 28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main 'T' at 600mm centre to centre to form agrid of

1200x600mm and size 24x48mm made of 0.30mm thick

(Minimum) sheet to be interlocked at middle of the

1200x600mm panel to form grid of size 600x600mm resting

on periphery walls/partitions on a perimeter wall angle pre-

44 Applying two coats of Acrylic lapy (putty) & two coats of 12839.00 Sqmt 40.59

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

45 Wall painting (two coats) with plastic emulsion paint of 8740.00 Sqmt 95.60

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

46 Painting (two coats) with plastic emulsion paint of approved 3318.00 0.00 90.48

brand and manufacture on undecorated ceiling surface to

give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and

sand papered smooth.

Item Description of Item Quantity Unit Rate In Amount

47 Wall Painting (Two coats) with weather proof 100% 7462.00 Sqmt 122.14

acraylic emulsion paint of approved brand and manufacture

and of required shade on exterior wall surface to give an

even shade over and including primery coat with Alkaly

resistance primer of approved brand after thoroughly

brushing surface to remove all dust and remains of loose

powdered material etc. copm. for all height

48 Providing And filling with good quality cinder (steam coal) 38.00 Cumt 518.13

as directed by engineer in charge in sunks in layers of 15 cm

thick,including watering,placing ,ramming well etc as

directed, for all floor.

49 Providing Water proofing Treatment on Sunk Slab including 145.00 Sqmt 373.60

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average

50mm thick to Prepare slope including water proofing

chemical etc. Complete for Sunk Slab All Floor.

50 Providing and laying water proofing treatment with china 2003.00 Sqmt 1164.53

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding for

maintaining slope for plain and curve surface & 12 mm to

mm of broken piece not more than 2.5CM of ceramic /

glazed tiles ( one for more colour as directed ) to be laid over

cement mortar bedding of C M 1:3 (1 cement : 3 sand )

contain water proofing materials per bag of cement useas

specified by manufactured and slops to be tempered to bring

mortar up to surface with using white cement and colour

pigment including rounding of junctions and extending them

up to 15 cm along the wall and curing with bends any patens

or design as per drawing and cleaning by using oxalic acid

51 Providing Plinth Protection to Building including excavation 523.00 Sqmt 1464.70

in ordinary soil and laying cement concrete 1:3:6 using stone

aggregates of 40mm nominal size in foundation layer

mm thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M200 pneumatic

compressed by mechanically pressed and as per approved

design including 75mm Sand layer for levelling and filling

the joint with sand in proper line and level etc. complete,

Including Providing and fixing pre-cast concrete kerb stone

of grey cement based concrete block 30cm length, 30cm

height and 15cm thick of M250 grade concrete as per

approved design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3

(1cement:3 fine sand) etc. complete.

Item Description of Item Quantity Unit Rate In Amount

52 Providing and fixing 3 shutter 3 track window having 104.00 Sqmt 3240.08

extruded aluminum Colour anodized section frame main

outer size 95mm x 24.10mm x 1.17mm @ wt.of 0.738 Kg/mt

, horizontal two track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.547 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.547Kg/mt, Beading clip 19mmx

17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

53 Providing and fixing 2 shutter 2 track window having 94.00 Sqmt 3525.91

extruded aluminum Colour anodized section frame main

outer size 95mm x 24.10mm x 1.17mm @ wt.of 0.738 Kg/mt

, horizontal two track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.547 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.547Kg/mt, Beading clip 19mmx

17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

54 Providing and fixing 4 shutter 2 track window having 28.00 Sqmt 3214.83

extruded aluminum Colour anodized section frame main

outer size 95mm x 24.10mm x 1.17mm @ wt.of 0.738 Kg/mt

, horizontal two track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.547 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.547Kg/mt, Beading clip 19mmx

17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

55 Providing & Fixing in position standard extruded approved 23.00 Sqmt 2096.96

colour anodised Aluminum Ventilation with outer frame 65 x

25 x 1.50 mm Stander Box Frame @ Wt 0.833 kg/Rmt with

5mm thick fixed ground glass and Mosquito net jali fixed to

alluminium strip blade fixed or adjestable ventilation

including all required materials, fixtures, fastenning, labours

and equipments as per detailed drawing as directed. For

Item Description of Item Quantity Unit Rate In Amount

56 Providing and fixing Double shuttered door having green 34.00 Sqmt 3274.42

marble frame (excluding cost of marble) with all open edges

machine cut & machine polished, fixed by zinc coated

hinges with double shutter of factory made & stamped I.S

12823 grade one, type one 35 mm thick solid core,

melamine faced, three layered resin, flushed door , having

decorative lamination on both sides & 12 mm thick teak

wood beading fixed around the door , Durable Grip shall be

providing with both side 15cm long stainless steel handle

and necessary Locking system, S.S. fixtures & fastenings etc.

directed by engineer in charge. Door from "NOVAPAN" OR

Equivalent company holding Licence for Minimum 5 years.

57 Providing and fixing Single shuttered door having green 100.00 Sqmt 3300.68

marble frame with all open edges machine cut & machine

polished, fixed by zinc coated hinges with double shutter of

factory made & stamped I.S 12823 grade one, type one

mm thick solid core, melamine faced, three layered resin,

flushed door , having decorative lamination on both sides &

12 mm thick teak wood beading fixed around the door,

Durable Grip shall be providing with both side 15cm long

stainless steel handle and necessary Locking system, S.S.

fixtures & fastenings etc. directed by engineer in charge.

Door from "NOVAPAN" OR Equivalent company holding

Licence for Minimum 5 years.

58 Providing and fixing FRP frame size 100 x 50 mm and 35 mm 105.00 Sqmt 2363.40

thick ( Fiber Glass with PUF Injection ) FRP depress panel

Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the both shutter & frame is to

be filed up with injected fire retradat grade polyurethene

foam done in situ along with embeded wooden pieces for

stiffening & also taking hinges & fintures.The whole FRP

frame & single or double shutter is to be waterproof,

weatherproof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws

& alluminum fixtures & fastenings & fartener sleeve.Colour

and Shade approved by Engineer-In-Charge.

59 Providing and laying 60 x 60 cm Machine polished Machine 2685.00 Sqmt 1121.80

cut Kota Stone slab flooring over 20 mm (average)thick

base of cement mortar 1:6 (1-cement 6-coarse sand) or L.M

1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed

with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete

(A) 25 mm thick

60 Providing and laying 60 x 60 cm Machine polished Blue Kota 115.00 Sqmt 1205.60

Stone slab 30 mm thick in riser of steps,skirting dedo and

pillars laid on 10 mm thick cement mortar 1:3 (1-cement 3-

coarse sand) and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc.complete (30 mm thick)

Item Description of Item Quantity Unit Rate In Amount

61 Providing and laying Matt finished ceramic tiles 60 x 60 cm 55.00 Sqmt 1120.36

size 8 mm thick in flooring treads of steps and landing laid

on a bed of 12 mm thick cement mortar 1:3(1-cement:3-

coarse sand)finishing with flush pointing in white cement

62 Providing and laying antiskid ceramic tiles 30 x 30 cm size 567.00 Sqmt 1017.30

12 mm thick in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3(1-cement:3-coarse

sand)finishing with flush pointing in white cement

63 Providing and laying glazed tiles tiles size 30 x 45 cm 6 mm 982.00 Sqmt 1523.67

thick in skirting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry

64 Providing and laying machine cut free edge machine Double 208.00 Sqmt 2024.04

polished granite stone 18mm thick finished treads and

risers in with 1cm projecting, nozing rounded moulding in

tread laid over 12 mm (av.) thick bases of cement mortar 1:6

(1-cement : 6-coarse sand) jointed with grey or colour

cement slurry including rubbing and polishing incl. making

Three No.s of grooves of size 3mm X 3mm along the length of

treads etc. complete

65 Providing and fixing polished 18 mm thick black granite with 8.00 Sqmt 2651.25

full round edge and double side polished of approved quality

in between urinal and fixing with cement slurry & adhesive

including moulding of both exposed edges as directed by

engineering in charge etc. complete.

66 Providing and fixing mirror polished 18 mm thick Green 442.00 Sqmt 2014.95

Marble stone with full round edge and polished of approved

quality in clading on sill and around the doors/ windows/

ventilation with 12 mm thick cement mortor CM (1:4) and

fixing with cement slurry & adhesive including moulding of

exposed edges as directed by engineering in charge etc.

67 Providing and fixing pre-cast Rubber Dye / steel Dye inter 1571.00 Sqmt 707.55

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete

68 Providinfg and fixing Safty grills of required pattern for 9067.00 Kg 116.15

windows/ Door using necessary 16x16 mm M.S. Square bar,

M.S flats and other structural steel at required spacing

including cutting, welding and fabriction etc. including one

coat of primer of approved quality and two coats of oil

painting as per detail drawing etc complete.

69 Providing erecting and fixing Virgin Plastic Sintex Black 36000.00 Litre 9.09

Double Layer Water Storage Tank of required capacity each

with all necessary fittings and connection etc. complete on

Item Description of Item Quantity Unit Rate In Amount

70 Providing laying and jointing in true line and level 50mm dia. 330.00 Rmt 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

71 Providing laying and jointing in true line and level 40mm dia. 454.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

72 Providing laying and jointing in true line and level 25mm dia. 385.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

73 Providing laying and jointing in true line and level 15mm dia. 210.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

74 Providing, laying and jointing in true line and level 160 250.00 Rmt 834.38

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length

x 196 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

Item Description of Item Quantity Unit Rate In Amount

75 Providing, laying and jointing in true line and level 110 370.00 Rmt 897.79

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

76 Providing, laying and jointing in true line and level 75 mm 150.00 Rmt 777.10

dia. UPVC SWRType B pipe conforming to IS 13592-1992

with one end plain and other end socketed with rubbering

and fitting conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp at every 2000 mm c/c or shall be conceled in

walss as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

77 Providing and fixing in PVC SWR cowel went 75mm dia to 9.00 No 16.16

pipes.(B) 75mm dia.

78 Providing and fixing in PVC SWR cowel went 110mm dia to 43.00 No 29.29

pipes.(B) 110mm dia.

79 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 107.00 No 600.23

100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

80 Providing and fixing wash down water closet (European type 34.00 No 2791.64

W C pan) with integral P and S trap including jointing the

trap with soil pipe in cement mortar 1:1 (1 cement five sand)

including providing and fixing plastic seat cover for wash

down WC with CP brass hinges and rubber buffers back

plastic seat and including providing and fixing PVC flushing

tank with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and couplings for

connection with inlet out let and over flow pipes 40 mm dia

porcelain enameled flush bend including cutting holes in

walls and making good the same connection the flush bend

with cistern and closet vitreous china.

81 Providing and fixing stainless steel grab 22 cm x 60 cm for 16.00 No 1492.78

handicapped toilet

82 Providing and fixing Angle cock with Wall flange crome 66.00 No 858.50

finished brass (i) 15mm dia.

Item Description of Item Quantity Unit Rate In Amount

83 Providing and fixing ball cock of approved. quality as 13.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

84 Providing and fixing washbasin with single hole for pillar tap 32.00 No 1649.86

with C.I. or M.S. brackets painted white including Rubber

plug, sutting holes and making good the same but excluding

fittings and also including rate of C.P. brass waste for

washbasin or sink (A) 32mm dia. and M.I. fisher union for

washbasin or sink. (A) 32mm dia.; (A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In white

85 Providing and fixing 600mm x 450mm bevelled edge mirrror 32.00 No 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

86 Providing and fixing C.P. brass towel rail comlete with C.P. 32.00 No 616.42

brass brackets fixed to wooden plugs with C.P. brass scews

(B) 600mm x 20mm size.

87 Providing and fixing screw down bib taps of following 110.00 No 214.81

size.(A) Brass screw down bib tap polished bright. (i) 20mm

88 Providing and fixing pillar tap, capstan head, screw down 32.00 No 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

89 Providing and fixing chromium plated brass half trun flush 34.00 No 263.77

cock of approved quality including fixing in pipe line etc.

complete (ii) 25mm dia.

90 Providing laying (to level or slopes) and jointing reinforced 826.00 Rmt 678.03

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends

prepared for collar joints including testing of joints

91 Providing and fixing S.W. gully trap with C.I. grating brick 32.00 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight (i)

Square mouth traps (B) 150mm x 100mm size P or R type

92 Constructing brick masonry chamber for underground C.I. 45.00 No 3223.92

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC

cover 455mm x 610mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete (i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Item Description of Item Quantity Unit Rate In Amount

93 Constructing brick masonry chamber for underground C.I. 44.00 No 3933.95

Inspection C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 500mmx 700mm intenal dimensions with

frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for single

94 Constructing brick masonry chamber for underground C.I. 29.00 Each 242.39

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC

cover 455mm x 610mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete (i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Extra over items for every additional depth of 0.1M. of part

thereof beyond 450mm depth for Brick masonry chamber.(i)

for 455mm x 610mm size.

95 Constructing brick masonry chamber for underground C.I. 24.00 Each 264.86

Inspection C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 500mmx 700mm intenal dimensions with

frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for single

Extra over items for every additional depth of 0.1M. of part

thereof beyond 450mm depth for Brick masonry chamber.(i)

for 500mm x 700mm size.

96 Providing and fixing GI Ladder of required pattern with GI 1500.00 Kg 95.95

flats(30x3mm) or round or square bars (12mm) at required

spacing & with round headed bolts and nuts or screws or

welding including primer coat of approved quality and two

coats of oil paintas as directed by engineer in charge

Item Description of Item Quantity Unit Rate In Amount

97 Constructing Kitchen Platform of 18 mm thick Polished 37.00 Sqmt 4193.52

Black Granite at top and 25 mm thick Kota stone slab one

side polished at bottom with cementing Materials / adhsives

including makeing necessary grooves in walls with Vertical

sandwich two Kotastone 25 mm support every 60 cm

centre to centre or as required including all labour material

of approved quality incl. full moulded round front edge

granite strip of one side polished and jointed with grey

cement slurry including rubbing and polishing etc. complete

98 Providing and fixing 25 mm thick polished kota stone Shalve 54.00 Sqmt 667.61

with full round edge and double side polished of any

required and fixing with cement slurry & adhesive including

both exposed edges cut and Smooth Finished as directed by

engineering in charge etc. complete.

99 Providing and fixing Kitchen sink with C.I. or M.S. brackets, 10.00 No 3640.04

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

Sink.(i) 600mm x 450mm x 150mm size

100 Providing and fixing Kitchen platform trolley having three 37.00 Sqmt 12886.59

drawers of SS (IS 304) of required size like thali, katleri,

perforated, partition, cupsosar type in kitchen platform

having drawer front side and backside by using 19mm thick

all proof plywood of ISI quality all side laminated etc. as

directed. The size of SS (IS 304) basket of size 4" to 18" for

thali, dish, katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles, nobs,

telescopic channels, etc. as directed

101 Providing and fixing 0.75 meter wide sand which type 15.00 Sqmt 7191.20

counter platform including supplying and fixing granite

stone of Z black or equivalant quality 18 mm thick mirror

polished on top and side posiition and vertical strip at front

with cement slurry & adhesive including moulding of both

exposed edges over 25 mm thick kotah stone platform

fixing in top and sides and itermediates supports fixing with

cement mortar and adhesive and finishing all material and

labour and assessories and 3 no flat back wash with

necessary fitting MI Fisher , Waste pipe and coupling ,

mm pillar cock etc. complete etc.

102 Providing and fixing 0.45 meter wide sand which type 36.00 Sqmt 3491.57

platform including supplying and fixing granite stone of Z

black or equivalant quality 18 mm thick mirror polished on

top and side posiition and vertical strip at front with

cement slurry & adhesive including moulding of both

exposed edges over 25 mm thick kotah stone platform

fixing in top and sides and itermediates supports fixing with

cement mortar and adhesive and finishing all material and

labour complete etc.

Item Description of Item Quantity Unit Rate In Amount

103 Providing and fixing in position 300 mm high, 150 mm wide 180.00 No 707.00

English letters made from 1.0 mm thick stainless steel sheet

as directed by Engineer in charge with all necessary tools &

plants etc. complete.

104 Providing and fixing in position 150 mm high, English letters 280.00 No 404.00

made from 1.0 mm thick stainless steel sheet as directed by

Engineer in charge with all necessary tools & plants etc.

105 Providing and laying and fixing 50 mm thick expansion joint 54.00 Sqmt 1491.03

by hydro cell semi rigid UV resistance with high

performance laminated closed cell polythene foam joint filler

in sheet foam as directed, etc. complete.

106 Applying and providing Expansion joint sealing System on 54.00 Sqmt 4772.00

100 mm vide joint including cleaning of exansion joint by

mechanical means provision of adhesive and flexible

membrane with required bond length as per menufracturer

specification and 4mm thick alluminium strip covering with

one side sloted and bolted with suitable system, inclusive of

all manpower, machinery and material as per specification

and as directed.

107 Providing and filling the expansion joint by Thioflex 600 54.00 Sqmt 515.39

polymer or equivalent confirm to BS 4254-1983 as per

required shade and manufactured specifi-cation by making

groove of 50 mm x 12.5 mm lather by cutting or by repairing

groove and removing mortar drop or any other foreign

materials including applying primer and filling required size

(oversize of joint PU foam etc. complete.

108 Providing and fixing 25 cm Wide & 3mm thick exterior 54.00 Sqmt 1054.34

composite panel on existing expansion joint horizontally &

vertically with all material, hardware, acessories & fittings

109 Providing & Fixing 114mm wide G.I. Sheets lovers having 179.00 Sqmt 4548.03

weight not less than 490 Gm/m roll formed to create 84mm

wide louver snap fixed on special shaped GI channel. Fix

louvers & channels shall finished with powder coating of

micron (1) 0.55mm thick sheet.etc. complet as per detail

drawing as directed.

110 Providing and Fixing Size: L 75mm x W 75mm x H 1200 ; 15 30.00 Nos 616.81

mm thick U shape corner Rubber Reflective Guards with

yellow reflective Patti fixing on RCC/brick surface Including

all fitting and material charges & it shall be Chemical

Resistant, Fade Proof, Frost - Heat & Weather Proof, High

Flexural Strength, Highly Durable, Stain Resistance as per

detailed drawing etc. complete as directed by Architect or

Engineer in charge.

Item Description of Item Quantity Unit Rate In Amount

111 Supply and Installation of Corner Guard protection system 30.00 Nos 1723.67

fixed to brick wall/or tile/dado at the corner from finished

floor level. It should be adjustable end cap. S.S.plate of

grade “100mm wide x1.54mm thickness x 1200mm length “.

Corner guard system consist of following: PVC cover, base,

top and bottom end cap in different color etc complete.

112 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile 185.00 Sqmt 1210.38

Warning Tiles (Attention Tiles i.e. Tactile Warning Surface

Indicator {TWSI}) of Johnsan Endura Tac Button Yellow Plus

or equvqlent make in flooring laid on 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand) on new surface and

jointed with cement slurry including finished with flush

pointing & cleaning the surface for all floors as per detailed

drawing etc. complete as directed by Architect or Engineer

in charge. Thse tiles shall be Anti Skid, Chemical Resistant,

Fade Proof, Frost - Heat & Weather Proof, High Flexural

Strength, Highly Durable, Stain Resistance . All Tactile

Warning Tiles meet the specific size and dimension

standards as required by ISO/FDIS

113 Providing and Fixing a set of wall mounted horizontal 2.00 Set 2671.45

stainless steel collapsible grab bar and vertical stainless steel

fixed grab rail of grade SS 304 from round pipe supported

with 75 mm dia 8 mm thick SS 304 base flange on wall

including anchor fasteners, nuts, accessories as per detailed

drawing etc. complete as directed by Architect or Engineer

114 Providing and fixing acrylic multilingual Braille (raised dots) 25.00 Nos 2056.66

DIRECTIONAL SIGNBOARDS of size 225 x 150mm designed

as per accessibility standards and having 3.5mm thick

acrylic base plate with Upper Case San Serif words made of

white acrylic non glare cut out letters of height 15mm raised

not less than 0.8mm above base plate and the equivalent

word written in Hindi with Devanagari non glare acrylic

letters of height 15mm raised not less than 0.8mm above

base plate and having a non-glare acrylic cut arrow pointing

in the required direction. Each signboard to be fixed as per

manufacturers specifications on the wall at the approved

location and at a height of 1200mm from FFL complete as

per design / specifications and guidelines as per the entire

satisfaction of the Engineer-in-charge

115 Providing & Fixing Braile Indicator Of Size 170 Mm X 35mm 120.00 Rmt 1102.01

For Handrails Of The Approved Design And Make Have

Braile Dots Raised 0.5 Mm Above Base Plate To Be Installed

At Specific Locations As Per Direction Of Engineer In Charge

116 Providing and fixing of conspectus tape 50mm width on of 40.00 Rmt 2563.38

treads in staircase including cutting pasting etc. As per

harmonised guidelines complete in all respect to the entire

satisfaction of engineer in charge.

Item Description of Item Quantity Unit Rate In Amount

117 Providing and laying controlled cement concrete M200 and 12.00 Cumt 7397.16

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Third Floor

118 Providing and laying controlled cement concrete M200 and 7.00 Cumt 7437.58

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Fourth Floor

119 Providing and laying controlled cement concrete M200 and 21.00 Cumt 6239.71

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Third Floor Beams

120 Providing and laying controlled cement concrete M200 and 4.00 Cumt 6280.12

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Fourth Floor Beams

121 Providing and laying controlled cement concrete M200 and 0.70 Cumt 6431.81

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C)

Chhajja/Loft for Third Floor

122 Providing and laying controlled cement concrete M200 and 0.30 Cumt 6472.23

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C)

Chhajja/Loft for Fourth Floor

123 Providing and laying controlled cement concrete M200 and 1.10 Cumt 7601.79

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C) Lintal for

124 Providing and laying controlled cement concrete M200 and 0.10 Cumt 7642.20

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (C) Lintal for

125 Providing and laying controlled cement concrete M200 and 24.00 Cumt 6769.04

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Third Floor Slab

126 Providing and laying controlled cement concrete M200 and 8.00 Cumt 6809.45

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Fourth Floor Slab

127 Providing and laying controlled cement concrete M200 and 4.00 Cumt 8449.24

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in (E) Stair

case for Second floor to Third floor

128 Providing and laying controlled cement concrete M200 and 4.00 Cumt 8489.65

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in (E) Stair

case for Third floor to Fourth Floor

Item Description of Item Quantity Unit Rate In Amount

129 Providing and laying controlled cement concrete M200 and 2.70 Cumt 8338.84

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in RCC

Vertical and Horizontal wall for Third Floor

130 Providing and laying controlled cement concrete M200 and 9.30 Cumt 8379.25

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in RCC

Vertical and Horizontal wall for Fourth Floor

131 Providing and laying controlled cement concrete M200 for 0.50 Cumt 6488.62

RCC work and curing complete including the cost of form

work but excluding the cost of reinforced concrete work in

Coping on Third Floor

132 Providing, laying and fixing 30 cm Height SS Railing made 87.00 Rmt 1571.96

from anticorrocive up of RCC Perapet Wall on fixing Hand

Railing 50 mm dia S.S. 304 grade (16 Gauge) SS Round

Hollow pipe horizontal 1 Nos and 35mm dia vertical

connection pipe 3 No with all material , laboure charges and

accessories as per requirement as directed by Engineer-in-

charge etc. complete.

133 Brick work using common burnt clay building bricks having 47.00 Cumt 4654.57

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional Third Floor

134 Brick work using common burnt clay building bricks having 13.00 Cumt 4697.66

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional 4th Floor

135 Half Brick masonry in common brunt clay building bricks 52.00 Sqmt 709.30

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super structure.

for Third Floor

136 Providing 20 mm thick double coat mala cement plaster on 583.00 Sqmt 352.54

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing, 10x10 mm

grooves etc. complete. For Third Floor

137 Providing 20 mm thick double coat mala cement plaster on 158.00 Sqmt 380.43

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing, 10x10 mm

grooves etc. complete. For 4th Floor

Item Description of Item Quantity Unit Rate In Amount

138 Providing 10 mm. Thick cement plaster in single coat for 178.00 Sqmt 211.04

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

including Mala troveled finish etc. complete. Third Floor

139 Providing 10 mm. Thick cement plaster in single coat for 30.00 Sqmt 235.50

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

including Mala troveled finish etc. complete. 4th Floor

140 Painting (Three coats) with plastic emulsion paint of 781.00 Sqmt 134.04

approved brand and manufacture on undecorated ceiling

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

141 Providing & fixing in position standard extruded Aluminum 35.00 Sqmt 4064.24

Four track (3 shutter + 1 Mosquito net shutter) with

Standard Extruded Colour Anodied Alluminium Section

Equivalent to Frame -Bottom with Weep Holes -20928,

Frame Top & Side-20837 ,Shutter Top & Bottom

Shutter Inter Lock -20550 ,Shutter Side (handle) -20549

With 5mm thick Transparent Tinted Float Glass With EPDM

Rubber Gasket, Air Lock Stirip and Finishing , Joint With

Section Sealant, With Power Coated Standard Alluminium

Fitting.with as per window size including all required

materials labours and equipments as per detailed drwg. as

142 Providing & fixing in position standard extruded Aluminum 7.00 Sqmt 4356.13

Three track (2 shutter + 1 Mosquito net shutter) with

Standard Extruded Colour Anodied Alluminium Section

Equivalent to Frame -Bottom with Weep Holes -20928,

Frame Top & Side-20837 ,Shutter Top & Bottom

Shutter Inter Lock -20550 ,Shutter Side (handle) -20549

With 5mm thick Transparent Tinted Float Glass With EPDM

Rubber Gasket, Air Lock Stirip and Finishing , Joint With

Section Sealant, With Power Coated Standard Alluminium

Fitting.with as per window size including all required

materials labours and equipments as per detailed drwg. as

143 Providing and fixing standard extruded colour anodised 5.00 Sqmt 2310.75

aluminium section equivalent to Frame-21458 with 5 mm

thick frosted glass adjustable louvers of approved standard

make, including EPDM rubber gasket, fittings, screws,

sealant, labour, tools & plants complete as per direction of

Engineer-in-Charge.

Item Description of Item Quantity Unit Rate In Amount

144 Providing and fixing Single shuttered door having granite 94.00 Sqmt 3467.33

stone frame with all open edges machine cut & machine

polished, fixed by zinc coated hinges with single/duble

shutter of factory made & stamped I.S 2202 grade one, type

one 35 mm thick solid core, melamine faced, three layered

resin, flushed door , having decorative lamination on both

sides & 12 mm thick teak wood beading fixed around the

door, Durable Grip shall be providing with both side 15cm

long stainless steel handle and necessary Locking system,

S.S. fixtures & fastenings etc. directed by engineer in charge.

145 Providing and laying 600 × 600 × 10 mm thick Soluble Salt 342.00 Sqmt 1599.84

Vitrified flooring of approved make, shade, colour and

pattern, , laying on approved tile adhesive / cement mortar,

jointing with matching shade epoxy / white cement grout,

cleaning, curing and protection of finished surface, complete

as per specifications and direction of Engineer-in-Charge.

146 Providing and fixing 100 mm high skirting with 600 × 600 × 102.00 Sqmt 1698.82

10 mm Soluble Salt Vitrified tiles (GVT) of approved make,

shade, colour and pattern, adhesive / cement mortar,

jointing with matching shade epoxy / white cement grout,

including finishing edges, rounding corners, cleaning, curing,

and all incidental works complete as per specifications and

direction of Engineer-in-Charge.

147 Providing and fixing mirror polished 18 mm thick Granite 139.00 Sqmt 2933.04

with full round edge and polished of approved quality in

clading on sill and around the doors/ windows/ ventilation

with 12 mm thick cement mortor CM (1:4) and fixing with

cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

148 Providing and fixing MS Box (75 mm x 50mm x 3mm) with 29.00 Sqmt 1848.30

clear spacing 100 mm including fixed on wall. Box should be

Powder Coated will be fitted in position including

accessories as per requirement as directed by Engineer-in-

charge etc. complete.

149 Wall painting (Three coats) of plastic paint; with one wall to 98.00 Sqmt 865.37

highlight in special effect (Royale play) colour and including

primery coat after thoroughly brushing surface to remove

all dust and remains of loose powdered material etc. copm.

150 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 511.00 Rmt 339.05

working pressure poluthene pipes of the following outside

Dia. Low densidy, complete with special falnge compression

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

Item Description of Item Quantity Unit Rate In Amount

151 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 60.00 Rmt 696.90

working pressure poluthene pipes of the following outside

Dia. Low densidy, complete with special falnge compression

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)160 mm

152 Providing junction for rain water juncton chamber of size 29.00 No 9112.22

0.60x0.60x0.75m with excavation of size 1.96x1.96 m &

0.15m thick c.c.1:2:4 bed concrete including brick masonary

wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm

thick cement plaster inside & outside & 1.06x1.06 RCC

(1:2:4) slab of thickness 0.15m with CRS steel and

0.60mx0.45m cast iron manhole cover with frame weight not

less than 35 kg as per directed by Engineer-in-charge

153 Providing Filter chamber of Brick work in C:M 1:6 of size 3.00 No 15440.88

2.06mx1.20m x1.20m & excavation dimension of 2.66mx

1.81x1.35m including C.C 1:2:4 bed concrete of 0.15m thick

including brick work in c.m 1:6 for 23cm thick wall including

15mm thick cement plaster inside & outside with cement

slurry & 10cm thick RCC 1:2:4 top cover with frame of

minimum weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm & sand as

per directed by Engineer-in-charge

154 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of 3.00 No 7986.07

water logging with excavation filling the pit with gravel &

sand in layers including making 300mm dia bore depth of

4.5mt & above concrete with kapchi in layers (25-40mm &

10-20mm) & BT metal 40mm & filling brick as directed by

Engineer-in-charge.

155 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 9.00 Cumt 3687.40

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

156 Providing 15mm thick cement plaster in single coat on 802.00 Sqmt. 231.38

Rough (Similar) side of single or half birck walls / concrete

wall for interior plastering and finished even and smooth in

C M 1:4 (1 cement : 4 coarse sand) with floting coat of neat

cement slurry etc. comp. For Ground floor

Item Description of Item Quantity Unit Rate In Amount

157 Constructing brick masonry chamber for underground C.I. 20.00 No. 7180.44

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions,

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with three or more

158 Providing and laying (two level or slopes) and jointing with 171.00 Rmt. 531.19

stiff mixture of Cement Mortar in proportion 1:1, Salt glazed

stone ware pipes of pipes 150mm laying lime concrete 1:2:4

(1-Lime putty :2-Fine samd : 4-Graded brick aggregates

40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary formwork and

curing complete.

159 Excavation for foundation for depth from 3.0 m to 5.0 m 70.00 Cumt 187.29

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

160 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size 4.00 Nos 958.17

having weight not less than 35Kg.

161 Providing & erecting open well horizontal mono block pump 4.00 Nos 36107.50

set with cast iron body, complete for three phase

submersible motor having

[H]For 15 H.P,3 phase open well horizontal mono block

pump set suitable for 1600 LPM to 1025 LPM @ 33 to

MTR head suitable for 65/80 mm dia delivery pipe

162 Supplying & erecting approvedmake 3 phase motor control 8.00 Nos 19695.00

cubicalpanel (Star-Delta) made from 16G.CRCA sheet duty

painted with epoxy powder painted inside and outside with

hinged doors and locking arrangement, consisting suitable

size of ON-OFF isolator (AC- 3/23duty) main fuses,single

phasing preventer cum water level, Guard(Compe unit),

Toggle switch to by pass Single phase preventercum

WLG,indicating lamps forR-Y-Bphases, over load

relay.Automatic water level controller, Ammeter &Voltmeter

each with two way selector switch incoming wires duty

socket Crimped,Panel to be erected on angle iron frame

grouted on wall as overload relay,thermal/Electronics star

delta cutoff timer,start-stop push buttons.The isolator

overload relay &cntractors ofL&T,Siemens or Cuttler Hamer

make only.Panel to be erected on angle iron frame ground on

wall (e)S/D upto 2.5 H.P.

Item Description of Item Quantity Unit Rate In Amount

163 Providing and fixing rolling shutters of approved make made 20.00 Sqmt 3554.40

of 80 mm wide M.S laths inter-locked together through heir

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside and

outside locking with push-pull operation including the cost

of hood cover and sprig etc.complete(A) Shutters having

width below 3.5M

164 Providing and fixing window having extruded aluminum 24.00 Sqmt 1731.64

Colour anodized section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

165 Providing and laying broken chine mosaic flooring for 149.00 Sqmt 779.70

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed

166 Providing and laying cement concrete flooring 1:2:4 (1- 149.00 Sqmt 355.69

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (A) 50mm thick.

167 Drilling of min. 250 mm dia. bore hole in all strata including 400.00 Rmt 1270.58

dualover burden strata by combination DR/DTH rig

including lowering 200 mm dia MS ERW pipes in bore hole

and testing etc.all work as per directed engineer incharge.

168 Manufacture, supply and delivery of cage typeTrapezoidal 360.00 Rmt 1682.66

shape ( ' V ') wire wound low carbon, Galvanized screen pipe

and Stainless Steel Screen pipes, confirming IS: 8110 For (B)

200mm dia 1) 1.00mm Slot size

169 Bore plug having 100 mm height made from M.S. plate with 3 4.00 No 1161.62

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts-bolts & lock nuts of std. Make

complete. For 250mm dia

170 Providing PVC insulated flat submersible cable as per 480.00 Rmt 180.79

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228.d)1 R x 3 C x

Item Description of Item Quantity Unit Rate In Amount

171 Suppling and installing 3 Phase Borewell 15.00 HP 4.00 No 37160.93

Submersible Pump Sets Electric motor driven conforming to

I.S. 8034 and motor conforms to IS-9283 working at 3 phase

400/440 volt 50 C/S A.C. supply & 2900 R.P.M. cat

172 Providing and fixing check or non return pully wheel valve of 8.00 No 1111.00

50 mm diameter.

173 Providing and fixing to wall,ceiliing and floor galvanised 360.00 Rmt 787.40

mild steel tubes ( Medium grade ) of the following nominal

bore, tube, fittings and clamps included making good the

wall, ceilling and floor (F) 50 mm

174 Supplying and lowering ISI-mark edunplasticized PVC 160.00 Rmt 393.90

(uPVC) casing pipe,200 mm outer diameter,as per IS:12818

175 Supply of Gravel of selected size 4 mm to 6 mm 160.00 Cum 2020.24

176 Geohydrological ground water investigation including 4.00 Nos 14428.86

vehicle charges for three phase DTH bore/DR tube well

including water sample testing & chemical analysis

177 Box cutting the road surface to proper slope and camber for 1291.00 Cum. 112.02

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

178 Construiction of 100/200 mm thick compacted granular sub 277.00 Cum. 1692.61

base (Garde- I, crushed B T materials of 53 mm to 9.5 mm @

by providing close graded material , mixing in mechanical

mix plant carriage at OMC, carraige of mixed material to site,

spreading in uniform layers with mortor grader on prepared

surface and compacting with vibratory power roller to

achieve the desired density, complete as per clause

179 Providing, laying, spreading and compacting graded stone 461.00 Cum. 1614.58

aggregate to wet mix macadam specification including

premixing the material with water at OMC in mechanical mix

plant carriage of mixed material by tipper to site, laying in

uniform layers with paver in sub-base / base course on well

prepared surface and compacting with vibratory roller to

achieve the desired density.

180 Providing and laying controlled cement concrete M.150 and 291.00 Cum. 3898.54

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (A)

Foundations and plinth pcc

181 Compaction and finishing of cement concrete road by trimix 1844.00 Sqm 63.63

M.250 process providing extra Labour charges for the trimix

vacume dewatering service process on cement concrete road

sutface by using vacuum dewatering pump floater surface

vibrator including making groves and rough finish to surface

including leveling etc complete.

Item Description of Item Quantity Unit Rate In Amount

182 Providing and Laying homoginious Grey cement based 792.00 Rmt 374.92

concrete kerbing of size 30 cm x 30 cm x 10 cm size as per

detailed drawing having grade of concrete M25 grade,

including necessary excavation, BBCC 1:5:10 7.5 cm as per

ddetailed drawing fixing in line and level, filling joints in CM

1:3 with smooth finished, white washing three coats etc.

complete as directed by Engineer in charge.

183 Supplying, installation, testing and commissioning of electric 2.00 Nos 147792.98

driven pressurisation pump suitable for automatic operation

and consisting of following, complete in all respects, as

required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron

bodyand bronze impeller with stainless steel shaft,

mechanical seal conforming to IS :

Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP

55 class of protection for enclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS :

M.S.fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. Suitable cement concrete

foundation duly plastered and with anti vibration pads.

300 LPM @ 88 Mtr Head.

184 CONTROL PANELS :Fabrication, supply, Insallation testing & 2.00 Nos 509835.78

commissioning of Electrical control panel of cubical

construction, floor mounted type, fabricated out of 2mm

thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved

shade after 7 tank treatment process, cable alley,

interconnection with suitable size copper conductor

cable/solid copper strip, having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for main fire pump,

pressurisation pump & diesel pump set complete as per

CPWD specification with following in coming and Outgoings,

suitable for operation on 415V, 3 phase, 50Hz Ac Supply

with enclosure protection class IP 42 as required

800A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital

Voltmeter 0-500V with selector switch Ammeter (0-800 A)

with selector swtich & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps Set of Copper Bus Bar 1000Amps.

( Note : All outgoing feeders for pumps should have digital

Ammeter with selector switches, and LED type ON, OFF, trip

indicating lamps)

125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP

fully automatic Star/Delta starter with overload protection,

current sensing type single phase preventor complete with

all acceessories and internal wiring required for automatic

operation, selector switch for local/remote,

Item Description of Item Quantity Unit Rate In Amount

185 Supply, Installation, Testing and Commissioning of 'C' class 50.00 Rmt 3165.15

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

186 Supply, Installation, Testing and Commissioning of 'C' class 375.00 Rmt 2262.89

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

187 Supply, Installation, Testing and Commissioning of 'C' class 200.00 Rmt 1668.92

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

188 Supply, Installation, Testing and Commissioning of 'C' class 60.00 Rmt 1428.95

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

189 Supply, Installation, Testing and Commissioning of 'C' class 100.00 Rmt 1134.42

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

190 Supply, Installation, Testing and Commissioning of 'C' class 30.00 Rmt 915.29

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

Item Description of Item Quantity Unit Rate In Amount

191 Supply, Installation, Testing and Commissioning of 'C' class 30.00 Rmt 754.00

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

192 Supply, Installation, Testing and Commissioning of 'C' class 75.00 Rmt 658.43

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts, bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required.

193 Supply, Installation, Testing and commissioning of Y Strainer 2.00 Nos 5910.86

of CI Body flanged ends with stainless steel strainer

having 1.2mm perforation 100 mm dia.

194 Supply, Installation, Testing and commissioning of Y Strainer 2.00 Nos 4170.79

of CI Body flanged ends with stainless steel strainer

having 1.2mm perforation 80 mm dia.

195 Supply, installation, testing and commissioning of Butterfly 6.00 Nos 7934.90

valve (manual) with CI body SS disc nitrile sheet & O - ring &

PN 16 pressure rating as specified.

196 Supply, installation, testing and commissioning of Butterfly 10.00 Nos 5904.43

valve (manual) with CI body SS disc nitrile sheet & O - ring &

PN 16 pressure rating as specified.

197 Supply, installation, testing and commissioning of Butterfly 6.00 Nos 4412.14

valve (manual) with CI body SS disc nitrile sheet & O - ring &

PN 16 pressure rating as specified.

198 Supply, installation, testing and commissioning of Butterfly 6.00 Nos 3809.37

valve (manual) with CI body SS disc nitrile sheet & O - ring &

PN 16 pressure rating as specified.

199 Supply, installation, testing and commissioning of Butterfly 12.00 Nos 3350.59

valve (manual) with CI body SS disc nitrile sheet & O - ring &

PN 16 pressure rating as specified.

200 Supply, Installation, Testing and Commissioning of Non 4.00 Nos 7588.69

Return Valve with dual plate of CI body SS plates vulcanized

NBR seal flanged end & PN 16 pressure rating as specified.

Item Description of Item Quantity Unit Rate In Amount

201 Supply, Installation, Testing and Commissioning of Non 6.00 Nos 7588.69

Return Valve with dual plate of CI body SS plates vulcanized

NBR seal flanged end & PN 16 pressure rating as specified.

202 Supply, Installation, Testing and Commissioning of Air 2.00 Nos 16156.42

vessel,size of 250 mm dia., 8 mm thick M.S sheet, 1200 mm

in height with Air release valve on top and flanged

connection to down comer, drain arrangement with 25 mm

dia. valve, pressure gauge with required accessories and

painting with synthetic enamel paint of approved shade as

The vessel shall be suitable for working pressure 8 kg/cm²,

Hydro test at 12Kg/cm².

203 Supplying and fixing single headed internal hydrant valve 8.00 Nos 6771.49

with instantaneous Gunmetal coupling of 63 mm dia with

cast iron wheel ISI marked conforming to IS 5290 (Type -A)

with blank Gunmetal/Stainless Steel cap and chain as

required Single headed Gunmetal

204 Supplying and fixing Single headed external yard hydrant 8.00 Nos 6771.49

valve with 1 No. 63 mm dia instantaneous FM Gunmetal Steel

coupling and cast iron wheel, ISI marked, conforming to IS

5290 (type A) with blank Gunmetal/Stainless Steel cap and

chain as required

Single headed Gunmetal

205 Supplying & fixing 63 mm dia stainless steel short branch 16.00 Nos 2139.34

pipe with 20 mm nominal internal diameter size nozzle

conforming to IS 903 suitable for instantaneous connection

to interconnect hose pipe coupling as required : Stainless

206 Supply, installation, testing and commissioning of First- Aid 16.00 Nos 10691.71

Hose Reel equipment with M.S. construction spray painted in

post office red, conforming to IS:884 with up to date

amendments, complete with the following as required.

(a) 30 m. long, 25 mm dia. water hose thermoplastic

(Textile reinforced) Type-2 as per IS:12585.

(b) 25 mm dia gun metal globe valve & nozzle

(c) Drum and swinging type fixing brackets on the wall.

(d) Connections from riser with 25 mm dia. SS ball valve.

207 Supplying and fixing of fire brigade connection of cast iron 2.00 Nos 5970.11

body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required :. 2 way-100

mm dia M.S. Pipe

208 Providing, fixing, testing & commissioning of 15mm dia 60.00 Nos 462.22

quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :

Pendent sprinkler 68°C

Item Description of Item Quantity Unit Rate In Amount

209 Supplying, installation, testing & commissioning of sprinkler 30.00 Nos 1623.01

flexible pipe (UL Listed) of stainless steel complete with

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

210 Supplying, installation, testing & commissioning of sprinkler 30.00 Nos 1479.31

flexible pipe (UL Listed) of stainless steel complete with

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

211 Providing, fixing, testing & commissioning UL listed SS 50.00 Rmt 2121.00

corrugated braided Flexible pipe, nominal Inlet by outlet 1"x

½" with required accessories to complete the installation.

a) Size: 1000mm

212 Providing & fixing flow switch in following sizes M.S. pipe 2.00 Nos 6654.18

including connection etc as required.

213 Providing, fixing, testing & commissioning of installation 1.00 Nos 42686.67

control valve of cast iron body, brass/bronze working parts

comprising of water motor alarm, bronze seat clapper,

clapper arm and hydraulically driven mechanical gong bell

to sound continuous alarm when the wet riser/sprinkler

system activates, pressure gauges, emergency releases,

strainer, pressure switch, cock valve complete with drain

valve and bypass, test control box, ball valves, MS pipe of

required size, flanges, orifice plate, gasket etc of follwing

sizes as required

214 Supplying and fixing orifice plate made out of 6 mm thick 16.00 Nos 1170.12

stainless steel (Grade 304) with orifice of required size to be

fitted between flange & landing valve of external and

internal hydrants to reduce pressure at the outlet to the level

of 3.5 kg/cm2 complete as required.

215 Supply, Installation, Testing and Commissioning of 100 mm 10.00 Nos 3333.00

dia Pressure Gauge of range 0 - 15 Kg / cm² conforming to IS -

3624 having bourdon tube of stainless steel 316 in cast

aluminium, stove enameled, black, weather proof case with

outer, screwed aluminium bezel and complete with

necessary U-type stainless steel siphon tube and cock

including providing suitably painted angle iron support to

the tube etc.as per specification complete as required.

216 Providing & fixing of pressure switch in M.S. pipe line 2.00 Nos 1969.50

including connection etc. as required.

Item Description of Item Quantity Unit Rate In Amount

217 Inspectors test assembly 1.00 Nos 10100.00

Providing and fixing inspectors test assembly complete with

alarm valve, test valve, sight glass sectional drain valve,

union with corrosion resistant orifice all complete strictly as

per drawing and standard

218 Installation control valve assembly 1.00 Nos 60600.00

Supply, installation, testing and commissioning of UL/FM

Approved installation control valve assembly with vertical

wet alarm valve with hydraulic alarm motor gong, 2 nos

pressure gauges,test valves 50 mm drain valves with all

necessary accessories.

219 Supply, Installation, Testing and Commissioning of Fire Hose 16.00 Nos 5454.00

Cabinet of size 750mmx600mx250mm fabricated from

swg thick MS sheet with 6mm thick glazed hinged type

centre opening doors having locking arrangement suitable

for accommodating 2 nos RRL hose pipes, 1 no. nozzle,

branch pipe & painting with two coats of anti-corrosive

primer and two coats of approved red enamel paint etc.

complete as required.

220 Supply, Installation, Testing & Commissioning of Non- 32.00 Nos 6262.00

percolating flexiblehose (RRL type-'A') ISI marked (IS: 636)

63 mm dia x 15 M long complete with instantaneous type

gunmetal 63 mm dia. IS marked Male and female couplings

(IS: 903) bound and riveted to hose pipe with copper rivets

and 1.5 mm copper wire. For internal hydrant with fixing

221 Supply, installation, testing and commissioning of Gun Metal 2.00 Nos 15150.00

Single Draw Out connection having 100mm female round

threaded connection to fit pump suction with accessories

complete as required.

222 Supply, Installation, Testing and Commissioning of Gun Metal 4.00 Nos 5353.00

Air Release Valve with necessary fittings. Size: 20 mm

223 Supply, installation, testing and commissioning of Carbon 16.00 Nos 7070.00

Dioxide (Co2) type Fire Extinguisher confirm to IS:15683,

with ISI marked / TAC approved fitted with required

accessories including wall suspension brackets.

224 Supply, installation, testing and commissioning of ABC type 6 16.00 Nos 2929.00

kg Fire Extinguisher confirm to IS:15683, with ISI marked /

TAC approved fitted with required accessories including

wall suspension brackets.

225 Supply, installation, testing and commissioning of MODULAR 2.00 Nos 3030.00

TYPE 5 kg AUTOMATIC FIRE

EXTINGUISHER:- with required accessories

Item Description of Item Quantity Unit Rate In Amount

226 Supplying, installing, testing and commissioning of GI sheet 2.00 Nos 4040.00

of 16gauge thickness Fire bucket with clean sand & stand in

accordance with IS 2546. Fire bucket shall have two coats of

anti corrosive paint, two coats of fire red paint on its outside

& two coats of white paint on the inside. The word "FIRE"

shall be clearly stencilled on it in accordance with IS

Vendor to include in his quote all costs relating to mounting

of the bucket at locations stated by the Fire NOC & the

Architect/EIC. Vendor to include in his quote all costs all

accessories, consumables, fittings & rigging equipments

necessary for the satisfactory installation of the same.(9

227 Supply, Installation, testing and commission of G.I. pipe with 50.00 Rmt 4141.00

4 mm thick anti corrosive tape for buried pipe including all

fitting such as elbow, tee, flanges, bolts etc. complete with all

civil work such as excavation, sand bedding (80mm), back

filling and leveling. Pipe shall be as per IS: 1239 Class "C”,

Welding method should be as per IS standard and

specification.150 mm dia

228 Preparation, Providing & fixing with necessary fitting / 15000.00 Sq.in 7.07

structure member of auto glow signage as per requirement

of Fire safety dept. / local CFO & specification of IS

229 Fire NOC and Fire Drawings 1.00 Job 252500.00

230 Legal Fees for Fire NOC (As per Builtup area) 3186.00 Sq. m 12.12

231 SITC of Manual Call Point Make: ASES 12.00 Nos 1010.00

232 SITC of Hooter Cum Strobe Make: ASES 12.00 Nos 1010.00

233 SITC of Smoke Detector with base Make: ASES 100.00 Nos 1161.50

234 SITC of Metal Junction Box With Gland to install detector on 3.00 Nos 656.50

235 Providing & Erecting XLPE (IS: 7098) (I)-88 ISI armoured 600.00 Rmt 141.40

cable multistrand copper conductor for 1.1 kV to be laid on

the wall with necessary clamps or in exiting trench/pipe at

road crossing or floor of following size of cable. - 2 core

sq mm ( 2 CORE X 1.5 SQMM REQUIRED)

Make: Polycab/Finolex/RR

236 SITC of 2 zone Fire alarm panel Make: ASES 3.00 Nos 25250.00

237 Earthwork in cuting in all sorts of soil and soft murrum 259.21 Cum 233.44

including conveying and spreading the stuff, embankment as

and where directed within 200meters from the end of the

cutting with all required lead and lift. upto 500 Meters.

238 Earthwork for embankment including breaking clods, 347.01 Cum 173.31

dressing with all lead and lift (excluding watering and

consolidation)(E) From Borrow area within 3.0 Km. lead

239 Rolling of Earth work in layers with power roller including 865.44 Cum 23.18

filling in depressions which occure during the process.

Item Description of Item Quantity Unit Rate In Amount

240 Steel work, welded in built up sections framed work 12600.00 kg 91.08

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint & two coat oil paint. (A)In

beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the

241 Providing and fixing of Ridge flashing for roof panel shall be 420.00 Sqm 867.39

made out of 0.5 mm thick pre coated GI sheet . The Precoated

sheet shall be of minimum 240 mpa steel grade confirming

to IS 14246:1995 and shall have zinc coating of minimum

120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on

both side of the sheet and polyester top coat 15-18 micron.

The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members

by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc

242 Constructing providing and fabricating cattle guard using 14.00 Sqmt 5155.04

channel section frame of size ISMC series 100 mm x 50 mm

(Weight 9.20 kg/Rmt) and ISMC section 100 mm x 75mm

(weight 11.50 kg/Rmt) intermediate support for welding

G.I.pipe at 12 Cm C/C of size 50 mm in a frame made of

Channel section size 100 mm x 50 mm all round including

fixing the unit on prepared chamber of masonary wall using

MS hold fast embeded in masonary wall top as directed by

Engineer in charge and as per drawing and necessary

required arrangement etc complete.

243 Providing and fixing decorative entrance slidng gate made 1632.00 kg 168.67

out of cast iron and various mild steel tabular section

combination , the MS gate with sliding mechanisum of all

including pattern and die making , cutting , welding

grinding, fabrication , fixing in position at compound wall

with necessary pedestal, bearing block and other locking

arrangement. The entrance gate should be painted with two

coats of priming coat of paint, and two coat of oil paint etc

complete. As per detail design and instruction of architect.

Item Description of Item Quantity Unit Rate In Amount

244 Providing and fixing concertina coil fencing with punched 395.00 Rmt 423.19

tape concertina coil 600 mm dia 10 mt openable length

having 50 no rounds per 6 mt length, upto 3mt height of wall

with existing angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge. placed 2.4mt or

3.00mt apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I.barbed wire tied

to angle iron, all complete as per direction of Engineer-in-

charge, with reinforced barbed tape (R.B.T.)/Spring core

(2.5 mm thick) and weight 43.478 gm/meter at compound

wall for ESR M4/ intakewell.

245 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 453.00 Pt. 582.77

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat-III

246 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 18.00 Pt. 291.39

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat-III

For Toilet Block

Item Description of Item Quantity Unit Rate In Amount

247 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 164.00 Pt. 809.01

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Ca-

248 Point wiring for Individual Plug with & earth wire of 1.5 42.00 Pt. 612.06

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Ca-III

249 Point wiring for Individual Plug with & earth wire of 1.5 72.00 Pt. 894.86

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

accessories. [II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board. (f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Ca-III

250 Point wiring for on board Looped Plug with 6A Modular type 136.00 Pt. 309.06

switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories. Ca-III

251 Providing and erecting Mains with 1.1 KV grade FRLS PVC 1910.00 Mtr. 104.03

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity

of following size. (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

Item Description of Item Quantity Unit Rate In Amount

252 Providing and erecting Mains with 1.1 KV grade FRLS PVC 315.00 Mtr. 140.39

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

253 Providing and erecting Mains with 1.1 KV grade FRLS PVC 185.00 Mtr. 184.83

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 6 sq. mm

254 Providing and erecting Mains with 1.1 KV grade FRLS PVC 175.00 Mtr. 326.23

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories (h) 4 wire 6 sq. mm

255 Supply of Fibreglass Step Trestle (A Type) Ladder - 10 FT 1.00 Nos. 25704.50

having following specifications :- It should have heavy gauge

steel hinges suitable for industrial application ,inside

Spreader Braces ,Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass ,two pairs of gusset

support at the bottom step and All gussets are heavy duty

steel. It should have steps on both the sides for climbing.

Capacity : 300 lbs." Step Width : 4” Bottom Width : 29”

Approx. Spread : 83” Approx. Wt. : 27 Kg Approx. Cube :

256 Supplying and erecting LED indoor fittings with LEDs of 282.00 Nos. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 % (fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral driver. (v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet Ca-III

Item Description of Item Quantity Unit Rate In Amount

257 Supplying and erecting led lamps with following wattage 131.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built, surge,protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder. (ii) 8 watts

258 Supplying and erecting LED indoor fittings with LEDs of 43.00 Nos. 758.51

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than

0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt ,LED driver efficiency > 85 % (fitting

required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20(iv) 24 watts,

Surge-2 KV Ca-III

259 Supplying and erecting LED street light / Flood light fittings 15.00 Nos. 5079.29

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(iii) 60 - 89 watts Ca-III

Item Description of Item Quantity Unit Rate In Amount

260 Supplying and erecting LED street light / Flood light fittings 8.00 Nos. 7186.15

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (B)

Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (v) 120 - 159 watts Ca-III

261 Supplying and erecting LED street light / Flood light fittings 2.00 Nos. 4096.56

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (C)

Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (b)

262 Providing and erecting Approved make Four pole moulded 11.00 Nos. 6790.23

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Item Description of Item Quantity Unit Rate In Amount

263 Providing and erecting Approved make Four pole moulded 2.00 Nos. 23041.13

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A.

with variable thermal & magnetic release suitable to work

on A.C.supply 50 Hz. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

264 Providing and erecting Approved make Earth fault Relay 1.00 Nos. 5956.98

suitable to mount with inter connection suitable to following

size of moulded case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V AC. with all

internal connections & complete erected in existing

M.S.housing. (3) 250 A -400 A , CT Ratio 1/400

265 Supplying & erecting approved make Four Pole 415V change 1.00 Nos. 13353.21

over switch interior for panel mounting with operating

mechanism A.C.23 duty confirming to IS for (E)250A / 320A

266 Supplying and erecting triple pole & neutral 440V / 500V 0.25 Rn.Mtr 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

267 Supplying and erecting triple pole & neutral 440V / 500V 1.00 Rn.Mtr 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. Capacity

268 Providing and erecting Miniature circuit breaker single pole 25.00 Nos. 297.95

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

269 Providing and erecting Miniature circuit breaker single pole 146.00 Nos. 123.22

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Ca-III

270 Providing & erecting 240 V MCB double pole switch for 15.00 Nos. 325.22

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Ca-III

Item Description of Item Quantity Unit Rate In Amount

271 Providing & erecting 415V MCB Four Pole Switch for 5.00 Nos. 701.95

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (b) 40 Amp. Ca-III

272 Providing and erecting Sheet Steel powder coated MCB 5.00 Nos. 2913.85

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)

273 Providing and erecting Sheet Steel powder coated MCB 7.00 Nos. 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing. (b) sheet

steel double door (IP-43) (iv)12 way

274 Providing and erecting Approved make RCCBs conforming to 38.00 Nos. 2458.34

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (iI) 40 Amps. DP Cat-III

275 Providing and erecting Annealed bare Copper wire 8 to 16 15.00 Kg 794.87

276 Pipe type earthing having 150 cms.long and 2.5 cms. dia. 4.00 Nos. 540.35

galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG

earth wire. & For using salt and charcoal / coke as required

for pipe type earthing.

Item Description of Item Quantity Unit Rate In Amount

277 Supplying & erecting earth pit of minimum bore dia.150mm 13.00 Nos. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound -

Nos Bag of 15 Kg.

278 Providing & erecting weather proof, dust & vermin proof, 2.25 Sq mtr 10468.65

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size. (A) locally fabricated panel board. (i) with

279 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured 75.00 Mtr. 126.25

copper cable 1.1 KV grade to be erected as directed of

following size. A) 2 core 2.5 Sq. mm

280 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 65.00 Mtr. 264.62

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables.(B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core)

Item Description of Item Quantity Unit Rate In Amount

281 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 200.00 Mtr. 589.84

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables. (E) 3 1/2 core 95 Sq. mm (

50 Sq. mm 1/2 core)

282 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 350.00 Mtr. 151.50

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (b) 4 core 6 Sq. mm

283 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 125.00 Mtr. 168.67

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (C) 4 core 10 Sq. mm

284 Making trench in soft soil of suitable width of 90 cm deep for 200.00 Mtr. 55.55

laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.

285 Providing & laying approved make Double walled 250.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer dia

286 Providing & laying approved make ISI marked HDPE 6Kg / 50.00 Mtr. 491.87

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

road crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr. (E) 90 mm

287 Providing and, fixing heavy duty flange type brass cable 24.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(c) 2 to 4 core 6 Sq. mm

288 Providing and, fixing heavy duty flange type brass cable 2.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables (C) 2 to 4 core 10 Sq. mm

289 Providing and, fixing heavy duty flange type brass double 4.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

290 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 131.30

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (D) 3 & 1/2

Item Description of Item Quantity Unit Rate In Amount

291 Solder less crimping type Aluminium lugs conforming to IS 100.00 Nos. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

292 Solder less crimping type Aluminium lugs conforming to IS 8.00 Nos. 13.13

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (B)

293 Solder less crimping type Aluminium lugs conforming to IS 16.00 Nos. 20.20

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

294 Solder less crimping type Aluminium lugs conforming to IS 32.00 Nos. 40.40

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (F)

295 Providing & erecting Approved make Ceiling Fan with 164.00 Nos. 1738.21

double ball bearing ISI mark with condenser A.C.230V 50c/s.

1400 mm. sweep complete, canopy erected on existing hook

or clamp with earthing [ Make shall be approved by

Engineer in Charge]

296 Supplying and erecting 19 / 20 mm. nominal bore Medium 164.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

297 Supplying & erecting fan hook box of 10 mm M.S. round bar 164.00 Nos. 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary

298 Supplying & erecting approved make low noise decorative 8.00 Nos. 1366.53

exhaust fan having square frame ABS body with inbuilt

lowers & square frame. 200mm with 1350 RPM Cat.II Ca-II

299 Providing recess in wall or window frame suitable for 8.00 Nos. 189.88

erection of Exhaust fan complete with plastering and colour

washing to match the colour of the wall or window complete

with expanded metal in order to render the fitting in

accessible and the room water-proof.

Item Description of Item Quantity Unit Rate In Amount

300 Supplying and erecting approved make Octagonal pole made 12.00 Nos. 9011.22

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long J-Bolt.Approx Pole

301 Supplying and erecting Street light pole bracket comprising 9.00 Nos. 491.87

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size

of pole top having nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [A] Single Arm bracket 0.5 Mtr

302 Supplying and erecting Street light pole bracket comprising 3.00 Nos. 622.16

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size

of pole top having nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [B] Double Arm bracket 0.5 Mtr

303 Supplying & erecting approved make SMC press moulded 10.00 Nos. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (c)150mm x

125mm x 100mm [deep]

Item Description of Item Quantity Unit Rate In Amount

304 Providing & erecting water cooler having storage capacity 5.00 Nos. 61482.74

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from

Stainless Steel.

305 Supplying & erecting reverse osmosis (RO) water 5.00 Nos. 77891.20

purification system with M.S. powder coated pedestal frame,

prefilter housing carbon filter suitable buster DC pump, auto

low & high pressure switches with following size of LPH

capacity & erected as directed with one year comprehensive

maintenance guarantee. [D] 100 LPH with 3 phase Raw

water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar

/CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron

cartridge filter 20" x 2.5" ( 1No), High pressure pump

500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO

Membrane housing with RO membrane of 40*40 - (1No), RO

pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2

Nos), with Recovery Rate 50%.

306 Supplying and erecting horizontal / vertical mounting type 8.00 Nos. 12433.10

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff complete

with heating elements,adjustable thermostats 300C to 850C,

indicating lamp, safety valve, fusible plug, etc.complete

erected with coach bolts, nuts. washers & cementation. ((D)

35 ltr.with 1.5/2 KW. heating element. Premium Category

307 Supplying and erecting approved make panel mounting type 2.00 Nos. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

308 Supplying and erecting approved make panel mounting type 2.00 Nos. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc. with manufacturers calibration

309 Supplying and erecting Ammeter / Voltmeter selector 4.00 Nos. 317.14

switch for 3 phase AC Supply 500 V on existing panel board

with necessary connections.

310 Supplying and erecting approved make suitable panel 6.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

311 Providing & erecting L.T. Current Transformer with bar 6.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter.

Item Description of Item Quantity Unit Rate In Amount

312 Providing & erecting open well horizontal mono block pump 2.00 Nos. 20621.17

set with cast iron body, complete for three phase

submersible motor having. [D] For 5 HP 3 phase open well

horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipe. Ca-II

313 Supplying & erecting approved make motor control cubical 2.00 Nos. 7250.79

panel [Star delta] made from 16G CRCA sheet duly epoxy

powder painted inside and outside with hinged doors and

locking with suitable size of ON - OFF isolator (AC 3 /

duty) main fuses. Digital volt and current meter (in a single

unit) with micro controller based control unit and current

sensing single phasing preventer electronic overload

protection, over voltage (Programmable) protection and

under voltage (Programmable) protection, prod less dry run

protection programming facility for setting of all parameter

like overload current, high voltage limit, low voltage limit,

dry run limit with digital indication on seven segment LED

display for any fault like over load, high voltage, low voltage,

dry running single crimped, electronic star delta timer,

feather touch start / stop push buttons to be erected on

angle iron frame. Grouted on wall the contactors will be of

L& T, Siemens, BCH make only) (A) DOL up to 5.0 H.P.

Supply, Installation, Testing & Commissioning of following

size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized

Aluminum alloy Frame With Twin Wall Profile, Front Cover :

High Transmission Low-Iron Tempered Glass (AR Coated),

High efficency and positive power tolerance Pmax: 0/+5,

Module Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with Waterproof

IP67 & MC4 Compatible and Enclosed with Bypass diodes,

100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module shall

equal or better than -0.45%/degree C. Solar PV modules of

minimum fill factor 75% to be used. Unit Production:- More

than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty and 25 year Linear Power Warranty

includes all mechanical and electrical parameters of the

Solar panel. Modules must be complied to the DCR(Domestic

content requirements). The Ration of AC to DC is 5:6 for the

Installation capacity which are given in AC KW.

Item Description of Item Quantity Unit Rate In Amount

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max

efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz,

Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P

THDi: <3%, Operating Tempreture Range: -25~60°C,

Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation

Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output

Short Circuit Protection, Output Over Voltage Protection, PV

array string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication: GPRS /

Wi-Fi. ntegrated, Input Reverse Polarity Protection

Integrated, Insulation Resistor Detection Integrated,

Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure:

he mounting (Rectangular pipe / square pipe / circular pipe)

with requisite cross bars, nuts and bolts, etc. shall be Hot

deep galvanized with minimum 80micron coating. The

Rectangular / square /circular hollow pipe section used for

the structure should have a minimum thickness of 2.0 mm.

other than above, the material thickness should be minimum

2.5 mm. A certificate of a structural engineer certifying the

strength and stability of the mounting structure to withstand

the weight and wind speed of 150 km/hour throughout the

life span of 25 years of the system, shall be submitted by the

vendors. Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the load

of solar panel,wiring, sprinkler system etc. with necessary

foundation work/wall mount, j bolt, anchor fastner etc. the

nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to 1200 mm or as

per site’s technical/feasibility requirement.

a. Column –The minimum section (thickness) should be

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be 40MM

* 40MM Balane of System with necessary Swichgears

(Suitabel size and protection of ACDB & DCDB), inter

314 (C ) Grid Tied Solar Power System: 11 - 25 kW (3 - phase) 50.00 Per KW 42455.35

Item Description of Item Quantity Unit Rate In Amount

315 Supply, Installation, Testing and Commissioning (SITC) of 1.00 Nos. 1286492.55

Silent Type Diesel Generating (DG) Set(s) of prime power

rating (kVA) as specified, complete as a packaged system,

conforming to CPCB IV+ (or better) emission norms, and

complying with all applicable statutory requirements, codes

and standards including (but not limited to) IS 4722:1968, IS

13364 (Part 2) and BS 5514 (latest editions/amendments).

The DG set shall be suitable for 415 V ±10%, 50 Hz ±5%, 3-

phase, 4-wire operation at 0.8 lagging power factor,

RPM, for tropical conditions, and shall be capable of

delivering 10% overload for one (1) hour after twelve (12)

hours of continuous operation (ISO 8528), unless otherwise

stated by the OEM. The scope shall include complete

accessories, interconnections, foundations/anti-vibration

arrangements, exhaust system, acoustic enclosure, earthing

(as required), consumables for first commissioning, and all

works necessary to render the installation fully functional

and compliant, as directed by the Engineer-in-Charge (EIC).

Factory testing shall be carried out with fuel and load bank

at 0.8 power factor and the DG set shall be offered for

inspection prior to dispatch.

The DG set shall be provided with a durable QR code/label

fixed on the enclosure/control panel, linking to a document

repository containing (as a minimum) approved GA

drawings, wiring diagrams, foundation and installation

details, OEM catalogues, operating & maintenance manuals,

factory test reports, type test certificates (where applicable),

warranty certificate, geo-tag of manufacturing location, and

rating plate data as per relevant IS/BS/ISO requirements.

The OEM/Contractor shall provide a Remote Monitoring

System (RMS) with minimum one (1) year connectivity

(SIM/data plan/server access as applicable), including

dashboard access, user ID/password, and data download

facility. RMS shall, at minimum, capture and report: DG

status (Auto/Manual/Off), start/stop events, kW/kVA/kVAR,

V/I/Hz, PF, run hours, fuel level, battery voltage,

alarms/trips with time stamp, and GPS/location (where

supported). All licences/subscriptions required for the

stated period shall be included in the quoted price.

Item Description of Item Quantity Unit Rate In Amount

(A) Diesel Engine:

Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel

engine, suitably rated for the specified DG set prime rating at

site conditions, complete with dynamically balanced

flywheel, heavy-duty engine mounting, and electric starting

arrangement. The engine governing shall be electronic

(isochronous/droop as per OEM standard) and shall comply

with ISO 8528/BS 5514 requirements for steady-state speed

regulation. Engine shall be complete with dry type air

cleaner with restriction indicator, lube oil cooler (if

required), radiator/cooling package (as applicable), and all

sensors/switches required for protections and annunciation.

The engine shall be capable of 10% overload for one (1)

hour after twelve (12) hours continuous operation and shall

be suitable for continuous duty under tropical ambient

conditions. The offered engine model shall be CPCB IV+

compliant and shall be supplied with complete emission

control/after-treatment system (including DEF/urea dosing

where applicable) along with all accessories, tanks, pumps,

heaters and controls required for compliant operation. The s

(M) Continuous rating of 125 KVA ,BHP not less than

316 AMF Panel: 1.00 Nos. 121201.01

Free standing floor mounted IP 42 automatic mains

failure control panel including auto by-pass, suitable for

KVA as below for silent type DG set complete with relays,

timers, set of CTs for metering & protection and energy

analyser to indicate currents, phase and line voltages,

frequency, power factor, KWH, Kilo Volt Ampere Reative

Hour (KVARH), KVA (Phase & Total), KW (MFM) &

provision for overload, short circuit, restricted earth

fault, under frequency, all complete and inter locking

and communication/ Ethernet /RS485/SNMP port open

protocol for BMS integration including suitable software,

the panel shall be of DG Set. as per approved by

Engineering in charge and including the following:

1. Suitable numbers and appropriate capacity 4 ACB/

MCCB with electronic release for O/C & E/F and shunt trip.

(Icu=100%Ics) (Not below 25KA Breaking Capacity at

415Volts), (Total Three Breakers)

2. Auto/Manual/Test/Off selector switch

3. Protection for under and over voltage phase

reversal (2 nos Over voltage relay, 2 Nos. reverse power

relay and 2 Nos. under voltage relay).

4. 3 Sets of current transformers 15 P 10 accuracy for

protection and 15 VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L- N &

L_L), kW, kVA (Phase & Total), Frequency, KWH, PF.

6. LED Indicating lamps for load on mains and load on set

7. Fuse/ MCB for instruments

Item Description of Item Quantity Unit Rate In Amount

8. Battery charger, complete with transformer/ rectifier, D.C.

voltmeter and ammeter, selector switch for trickle, off

and boost and current adjustment.

9. Control/Signal/Multi core/Communication Cables

between DG Set and AMF Panel upto 20 Mtr

10. Main supply failure monitor

11. Supply failure timer

12. Restoration timer

13. Control unit with three impulse automatic engine

start/stop and failure to start lockout.

14. Impulse counter with locking and reset facility.

15. ON/OFF/Control circuit switch with indicator

16. Audio/Video annunciation for

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning16. Protection

for over/under Frequency, Loss of AC sensing, Over

Current, Unbalancing load with suitable number of relays

and accessories

17. Maintenance notification based on Engine Run Hour

18. Load Management through PLC to achieve auto

opening and closing of incomer breakers, bus coupler

switching of essential panel , interlocking providing

signal to AMF Panel for load status and AMF shall give

command to DG Set to auto start / auto stop depending

upon load status and requirement etc. and necessary

hardware and software required to perform the operation

(C) AMF Control Panel for100 kVA/125 KVA3 phase DG Set

317 Decorative call bell Ting-tong box type 250 volts complete 7.00 Nos. 71.71

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words)

of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Item Description of Item Quantity Unit Rate In Amount

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

1 Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

4 as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

The Contractor will have to submit the all required mix design at his own cost before execution as directed and to be

5 approved from the Engineer in charge.

Deputy Executive Engineer Executive Engineer

Bodeli (R&B) Sub-Division District (R & B) Division

Bodeli Chhotaudepur