JOB WORK ORDER FOR REPAIR/REPLACEMENT OF TATA MOBILE BA NO 07C-080907E (TATA MOBILE), EICHER BA NO 14D-194323M, EICHER BA NO 14D-194320A AND EICHER BA NO 07D-172742P OF AGE E/M SILCHAR AT MASIMPUR MIL STATION UNDER GE SILCHAR.

Amount

JOB WORK ORDER FOR REPAIR TO VEH BA NO 07C-080907E (TATA MOBILE) AT MASIMPUR MIL STATION UNDER GE SILCHAR

Labour Charges (a) Mechanic/labour charges for removing door from veh and unserviceable accessories and part opening/removing from door and repladcement at workshop, then fitting and fixing the door as fitted before and adjustment at satisfaction level or directed by Engr-in-Charge = 01 Job. Note :- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No-1.02. to 1.05. (b) Mechanic/labour Charge for dismantling the cylinder head, cover, moving parts and repair to rear axle, clutch work, rear spring parabolic, air filter, colling system, fuel filter, radiator, electric system and then checking them at satisfaction lave of Enge-in-Charge = 01 Job. . Note :- Items/Spare parts of respective repairs for replacement will be measeured separately in item Ser No 1.02 to 1.05.

Replacement of following Spares in Veh (a) VEH CABIN ATTACHMENT PART (i) Assy. guide channel Left Hand = 01 X Each. (ii) Assy. guide channel Right Hand = 01 X Each. (iii) Assy. window regu Left Hand-Manual = 01 X Each. (iv) Assy. window regu Right Hand-Manual = 01 X Each. (v) Assy. sunvisor Left Hand RHD Light gray = 01 X Each. (vi) Assy. sunvisor Right Hand RHD Light gray = 01 X Each. (b) REAR AXLE (SPICER) (i) Pin Roll = 01 X Each. (ii) Pinion diff std = 01 X Each. (iii) Shaft diffl std = 01 X Each. (iv) Thrust washer diff. gear = 02 X Each. (v) TH washer diffl pinion = 01 X Each. (vi) End yoke = 01 X Each. (vii) Pinion nut = 01 X Each. (viii) Retainer WH BRG INN D/S = 02 X Each. (ix) Snap ring = 02 X Each. (x) Retainer oil seal = 02 X Each.

(c) CLUTCH CONTROL AND CLUTCH WORK (i) Hex screw M8 X 25 = 01 X Each. (ii) Spring washer B8 IS3063 SS8451-8C = 01 X Each. (iii) Hex nut M8 = 01 X Each. (iv) Clevis pin = 01 X Each. (v) Assy. clutch pedal level = 01 X Each. (vi) Assy. pedal lever (Brake R.H.D.) = 01 X Each. (vii) Sintered bush = 01 X Each. (viii) Spacer = 01 X Each. (ix) Hex bolt M10 X 65 = 01 X Each. (x) Rub cover CL and BR pedal = 01 X Each. (xi) Pivot bush= 01 X Each. (xii) 240 DIA clutch disc assy (SPACIO GOLD+) CKN = 01 X Each.

(d) REAR SPRING PARABOLIC (i) Assy first leaf with bushes = 01 X Each. (e) AIR FILTER (FRONT ENTRY AIR INTAKE) (i) Assy air filter complete = 01 X Each. (ii) Assy element air cleaner = 01 X Each. (f) ENGINE COLLING SYSTEM (i) Water pump pulley 207 DI BSII AC+PS = 01 X Each. (ii) Poly V belt (6PK) 1173 LG BS4 = 01 X Each. (g) FUEL FILTER (i) Fuel filter assy = 01 X Each. (ii) Cartridge fuel filter = 01 X Each. (iii) Prefilter insert (with sealing ring) = 01 X Each. (iv) Filter cover assy = 01 X Each. (v) Sealing ring = 02 X Each.

(h) RADIATOR (i) Hose (Radiator to water Pump) = 01 X Each. (ii) Water tank(AUX) = 01 X Each. (iii) Pipe 650mm = 01 X Each. (iv) Pressure cap BS4 = 01 X Each. (v) Drain cock = 01 X Each. (vi) Thermostate switch ( 39OC) = 01 X Each. (j) ELECTRICAL EQUIPMENT (i) Stud battery clamp = 02 X Each. (ii) Assy batery cable +ve and -ve RHD = 01 X Each. (iii) Wiper controller = 01 X Each. (iv) Relay W/surge suppress = 01 X Each. (v) Micro relay 12V 20A = 01 X Each. (vi) Relay (For auxiliaries) 12V = 01 X Each. (vii) 3.2 DIA speedo cable 1300MM JIS (4SP) Offer = 01 X Each. (viii) Horn 12V = 01 X Each. (ix) Head lamp LH RHD AUTO LEV = 01 X Each. (x) Assy blinker lamp with bulb LH = 01 X Each. (xi) Assy blinker lamp with bulb RH = 01 X Each. (xii) Side repeater lamp = 01 X Each. (xiii) Assy tail lamp LH = 01 X Each.

Repairs/Replacement of Veh BA No 14D-194323M (EICHER) at Masimpur Mil Station under GE Silchar

Labour charges :- (a) Mechanic/Labour Charge for Door opening/removing from veh old glass removing and the new door glass fitting and fixing the door as fitted before door regulator change and Adjustment at satisfaction level or directed by Engr -in-Charge = 01 Job. Note :- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No -2.03 to 2.05. (b) Mechanic/Labour Charge for removing of unserviceable lamp from light and fixing new lamp, replacement of horn, wiper and wiper moter and checking for serviceability as directed by Engr-in-Charge = 01 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No -2.03 to 2.05.

(c) Mechanic/Labour Charge for Rear and Front wheel Opening with the help of placing jack beneath the veh removing the complete wheel with rim. Washig the veh hub with the help of kerosine 1 ltr, Removing and installation of four new hub and adjustment of hub play, then complete greasing of veh and then fitting the same in vehicle, checking the rotation of veh at the satisfaction levell or directed by Engr -in-Charge = 04 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No - 2.03 to 2.05. (d) Mechanic/Labour Charge for dismantling the gear box replacement of the parts, Repair to clutch/break, gear, transmission system, cooling system and electrical system and Checking them at satisfaction level of Engr -in -Charge = 01 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No - 2.03 to 2.05.

Replacement of Spares in Cabin attach and electrical system (a) Head lamp tipper Left Hand side = 01 X Each. (b) Head lamp tipper Right Hand side = 01 X Each. (c) Horn low tune (MAV COWL) = 01 X Each. (d) Assy Outer Lock handle L/H = 01 X Each. (e) Pop up knob = 04 X Each. (f) Blinker left hand side = 01 X Each. (g) Blinker Right hand side = 01 X Each. (h) Wiper blade left hand side = 01 X Each. (j) Wiper Arm Left Hand side = 01 X Each. (k) Motor and Link assy wiper = 01 X Each. (l) Washer Wiper Spring = 01 X Each. (m) Bracket wiper = 01 X Each. (n) Bolt wiper = 01 X Each.

Replacement of Spares in clutch, brake, gear and transmission system (a) Pipe oil injection pump (MICO) = 01 X Each. (b) Pipe Fuel Feed 'A' (MICO) = 01 X Each. (c) Pipe Fule Feeb 'B' (MICO) = 01 X Each. (d) Oil Seal = 01 X Each. (e) Gasket oil drain plug = 01 X Each. (f) Gasket oil filter = 01 X Each. (g) Brake Oil = 0.5 X Ltr. (h) Gear oil 5.5 Ltr = 5.5 X Ltrs. (j) Engine Oil 10 Ltr = 10 X Ltrs. (k) Filter Element = 01 X Each. (l) Pipe fuel suction = 01 X Each. (m) Pipe fuel discharge = 01 X Each. (n) Cable Accelator Control -MI = 01 X Each. (o) Accelator cabel assy = 01 X Each. (p) Engine stop cable (MICO) = 01 X Each. (q) Pedal assy accelator = 01 X Each. (r) Cabel Parking Break = 01 X Each. (s) Brake pedal complete = 01 X Each. (t) Brake master cylinder = 01 X Each. (u) U J Kit = 02 X Each. (v) Nipple grease front axle = 01 X Each. (w) Rear wheel hub bolt kit Left Hand = 01 X Each.

(x) Rear wheel hub bolt kit Right Hand = 01 X Each. (y) Bearing rear wheel hub inner = 01 X Each. (z) Nut wheelBrg. Left Hand = 01 X Each. (aa) Nut wheelBrg. Right Hand = 01 X Each. (ab) Bearing Bal (MCV) = 01 X Each. (ac) Clutch facing kit = 01 X Each. (ad) Lower yoke and sleeve assy = 01 X Each. (ae) Clutch service Kit LCV = 01 X Each. (af) Gear shift lever = 01 X Each. (ag) Clutch pedal kit LCV = 01 X Each. (ah) Spring clutch return = 01 X Each. (aj) Pinion differential = 01 X Each. (ak) Gear differential = 01 X Each. (al) Pin piston = 01 X Each. (am) Piston ring set std = 01 X Each.

Repairs/Replacement of Vehicle BA No 14D-194320A (EICHER) at Masimpur Mil station under GE Silchar

Labour Charges (a) Mechanic/Labour Charge for door opening/removing from veh old glass removing and the new door glass fitting and fixing the door as fitted before Door regulator change and Adjustment at satisfaction level, or directed by Engr -in-Charge = 01 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 3.03 to 3.06. (b) Mechanic/Labour Charge for removing of unserviceable lamp from light and fixing new lamp, replacement of horn, wiper and wiper moter and checking for serviceability as directed by Engr-in-Charge = 01 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 3.03 to 3.06.

(c) Mechanic/Labour Charge for Rear and Front wheel Opening with the help of placing jack beneath the veh removing the complete wheel with rim. Washig the veh hub with the help of kerosine 1 ltr, Removing and installation of four new hub and adjustment of hub play, then complete greasing of veh and then fitting the same in vehicle, checking the rotation of veh at the satisfaction levell or directed by Engr -in-Charge = 04 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 3.03 to 3.06. (d) Mechanic/Labour Charge for dismantling the gear box replacement of the parts ,Repair to clutch/break, gear, transmission system, cooling system and electrical system and Checking them at satisfaction level of Engr -in -Charge = 01 Job. Note:- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 3.03 to 3.06.

Replacement of Spares in Cabin attach and electrical system (a) Head Lamp Tipper Left Hand = 01 X Each. (b) Head Lamp Tipper Right Hand = 01 X Each. (c) Pop up knob = 04 X Each. (d) Blinker Left Hand side = 01 X Each. (e) Blinker Right Hand side = 01 X Each. (f) Wiper blade Left Hand side = 01 X Each. (g) Wiper Arm Left Hand side = 01 X Each. (h) Motor &Link assy wiper = 01 X Each. (j) Washer Wiper Spring = 01 X Each. (k) Bracket wiper = 01 X Each. (l) Bolt wiper = 01 X Each.

Replacement of Spares in clutch, brake, gear and transmission system (a) Pipe Oil Injection Pump (MICO) = 01 X Each. (b) Pipe Fuel Feed `A' (MICO) = 01 X Each. (c) Pipe Fuel Feed `B' (MICO) = 01 X Each. (d) Oil Seal = 01 X Each. (e) Gasket oil drain plug = 01 X Each. (f) Gasket oil filter = 01 X Each. (g) Brake Oil = 0.5 X Ltr. (h) Gear oil 5.5 Ltr = 5.5 Ltrs. (j) Engine Oil 10 Ltr = 10 X Ltrs. (k) Filter Element = 01 X Each. (l) Pipe fuel suction = 01 X Each. (m) Pipe fuel discharge = 01 X Each. (n) Cable Accelator Control -MI = 01 X Each. (o) Accelator cabel assy = 01 X Each. (p) Engine Stop cable (MICO) = 1 X Each. (q) Pedal assy accelator = 01 X Each.

(r) Cabel Parking Break = 01 X Each. (s) Break Padal complete = 01 X Each. (t) Brake Master Cylender = 01 X Each. (u) U J Kit = 02 X Each. (v) Nipple grease front axle =01 X Each. (w) Rear wheel hub bolt kit LH = 01 X Each. (x) Rear wheel hub bolt kit RH = 01 X Each. (y) Bearing rear wheel hub inner =0 1 X Each.B17 (z) Nut wheel Brg.LH = 01 X Each. (aa) Nut wheel Brg.RH =01 X Each. (ab) Bearing Bal (MCV) = 01 X Each. (ac) Clutch facing kit = 01 X Each. (ad) Lower yoke and sleeve assy =0 1 X Each. (ae) Clutch service Kit =01 X Each. (af) Gear shift lever = 01 X Each.

(ag) Clutch Padal Kit LCV = 1 X Each. (ah) Spring clutch Return = 1 X Each. (aj) Pinion differential = 1 X Each. (ak) Gear differential = 1 X Each. (al) Pin piston = 1 X Each. (am) Piston ring set std = 1 X Each.

Repairs/Replacement of Vehicle BA No 07D-172742P (Eicher) at Masimpur Mil Station under GE Silchar

Labor Cahrges:- (a) Mechanic/Labour Charge for door opening/removing from veh old glass removing and the new door glass fitting and fixing the door as fitted before Door regulator change and Adjustment at satisfaction level, or directed by Engr -in-Charge = 01 Job. Note :- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 4.03 to 4.05. (b) Mechanic/Labour Charge for removing of unserviceable lamp from light and fixing new lamp, replacement of horn, wiper and wiper motor and checking for serviceability as directed by engr-in-charge = 01 Job. Note :- Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 4.03 to 4.05.

(c) Mechanic/Labour Charge for Rear and Front wheel Opening with the help of placing jack beneath the veh removing the complete wheel with rim. Washig the veh hub with the help of kerosine 1 ltr, Removing and installation of four new hub and adjustment of hub play then complete greasing of veh then fitting the same in vehicle, checking the rotation of veh at the satisfaction levell or directed by Engr -in-Charge = 04 Job. Note :-Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 4.03 to 4.05. (d) Mechanic/Labour Charge for dismantling the gear box, replacement of the parts, Repair to clutch/break, gear, transmission system, cooling system and electrical system and Checking them at satisfaction level of Engr -in -Charge = 01 Job. Note :-Items/spare parts of respective repairs for replacement will be measured separately in item Ser No 4.03 to 4.05.

Replacement of Spares in Cabin attach and electrical system (a) Head lamp tipper Left Hand side = 01 X Each. (b) Head lamp tipper Right Hand side = 01 X Each. (c) Pop up knob = 04 X Each. (d) Blinker left hand side = 01 X Each. (e) Blinker Right hand side = 01 X Each. (f) Wiper blade left hand side = 01 X Each. (g) Wiper Arm Left Hand side = 01 X Each. (h) Motor and Link assy wiper = 01 X Each. (j) Washer Wiper Spring = 01 X Each. (k) Bracket wiper = 01 X Each. (l) Bolt wiper = 01 X Each.

Replacement of Spares in clutch, brake, gear and transmission system (a) Pipe oil inhection pump (MICO) = 01 X Each. (b) Pipe Fuel Feed 'A' (MICO) = 01 X Each. (c) Pipe Fule Feeb 'B' (MICO) = 01 X Each. (d) Oil Seal = 01 X Each. (e) Gasket oil drain plug = 01 X Each. (f) Gasket oil filter = 01 X Each. (g) Brake Oil = 0.5 X Ltr. (h) Gear oil 5.5 Ltr = 5.5 X Ltrs. (j) Engine Oil 10 Ltr = 10 X Ltrs. (k) Filter Element (Filter element) = 01 X Each. (l) Pipe fuel suction = 01 X Each. (m) Accelator cabel assy = 01 X Each. (n) Engine stop cable (MICO) = 01 X Each. (o) Pedal assy accelator = 01 X Each. (p) Cabel Parking Brake = 01 X Each. (q) Brake pedal complete = 01 X Each. (r) Brake master cylinder = 01 X Each. (s) U J Kit = 02 X Each. (t) Nipple grease front axle = 01 X Each.

(u) Rear wheel hub bolt kit LH = 01 X Each. (v) Rear wheel hub bolt kit RH = 01 X Each. (w) Bearing rear wheel hub inner =0 1 X Each.B17 (x) Nut wheel Brg.LH = 01 X Each. (y) Nut wheel Brg.RH =01 X Each. (z) Bearing Bal (MCV) = 01 X Each. (aa) Clutch facing kit = 01 X Each. (ab) Lower yoke and sleeve assy =0 1 X Each. (ac) Clutch service Kit =01 X Each. (ad) Gear shift lever = 01 X Each. (ae) Clutch pedal kit LCV = 01 X Each. (af) Spring clutch return = 01 X Each. (ag) Pinion differential = 01 X Each. (ah) Gear differential = 01 X Each. (aj) Pin piston = 01 X Each. (ak) Piston ring set std = 01 X Each.

M/S Baba Shyamananda Enterprise

M/S Ratan Chandra Paul