SPECIAL REPAIR FOR REPLACEMENT OF EXISTING IRON WOODEN WINDOWS AND DOORS OF STN HQ BLDG WITH CERTAIN B R WORKS AT 17 FBSU AF UNDER GE AF TRIVANDRUM

Amount

SCHEDULE 'A'

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkats or frames of any description exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

M & L for powder coated Aluminum anodised frame for partition, doors, ,grills, sliding windows, and ventilators aluminium section inlcuidng necessary jointing cleats, glazing clips, ruber neoprene pacing, , anodised alumium snap beading screws etc. complete all as specified and directed.

S & F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed.

S & F Anodised aluminium powder coated sliding window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.

M & L for 12 mm thick prelaminated particle board, exterior grade,prelaminted both side with decorative choice lamination, fixed with screws to aluminium frame work etc complete all as specified and directed.

S & F 4.8 mm thick sheet glass ordinary quality in square or rectangle exc 0.5 sq. m in each pane fixed to aluminium window frame including necessary jointing cleats, glazing clips,ruber neoprene packing, anodised aluminium snap beading, screws complete all as specified and directed.

S & F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S & F mild brass 2 lever mortice lock, vertical type 100 mm size complete all as specified and directed.

S & F floor door stopper of aluminum alloy body and tongue,over all length of cover plate 150mm anodised with hard drawn steel spring, overall length suitable for aluminium door/ woodden door complete all as specified and directed.

S & F of aluminium body door closer, hydraulically regulated, (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 kg complete all as specified and directed.

M & L for providing water proofing treatment with polymeric standard water proofing membrane by cleaning surfaces of old concrete by picking, sweeping clean and washing down with water to remove dust and to expose the original concrete roof complete all as specified and described under :- 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof padding in slop, finished surface even and smooth without using extra cement,3 mm thick APP modified water proofing membrane weighing not less than 3 Kg/Sqm reinforced with non woven fabric polyster matt weighing not less than 150 gm/Sqm incl applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/Sqm complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste/rain water and vent pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M & L for non skid coloured ceramic tiles, 7 to 8 mm thick, area of each tile exc 0.11 & not exc. 0.18 sqm,in floors with 15mm screed bed etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

Taking down cement plaster including raking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulsion on wall surfaces over a coat of 3mm thick wall care putty (Birla White) complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finishing the surfaces even and smooth (without using extra cement) with water proofing compound. complete all as specified and directed (NOTE:Waterproofing compound shall be measured and paid seperately.)

Supply only integral water proofing compound.

M & L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistance priming paint complete all as specified and directed.

M & L for rendering 5 mm thick on fair faces of concrete ceiling surfaces in cement mortar 1:3 finished fair and even complete all as specified and directed.

M & L for Gl wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting and including necessary fastnes,drilling bolting using mechanical devices complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash on complete all as specified and directed

M&L Dismanling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer in charge.

S & F in repairs mild steel in framed work such as grills, gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; ladders and similar work confirming to Fe.290.Gde-E-165 to be fixed at any height from GL complete all as specified and directed.

M & L for preparion of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for complete removal of existing old treatment and applying two coats of distemper oil emulsion to walls complete all as specified and directed.

M & L for removing of debris to distance up to 5km outside MOD including tha rate of loading and unloading and stacking at the destination complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). exc 500 & n exc 1000 capacity in ltrs complete all as specified and directed.

Sub Total of Schedule 'A'

SCHEDULE OF CREDIT

Schedule of Credit (Minus) Rs. 4,120.00.00 B/F from Ser page No.109. NOTE: Bidder shall insert credit amount as rate Rs. 4,120.00 in Green field under Col-5.

Sub Total of Schedule of Credit

KENZ CONSTRUCTIONS

Dhanyaconstructions