REPAIR/REPLACEMENT OF SANITARY FITTINGS, TILES, GRANITE AND OTHER CONNECTED B/R ITEMS IN CERTAIN BUILDINGS IN TECHNICAL AREA AT 3BRD UNDER GE (AF) MC CHANDIGARH

Amount

S&F in repair, for 75 mm bore PVC (SWR) pipes single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floors, walls etc complete all as specified and directed.

S&F in repair for 75 mm PVC bends any radius complete all as specified and directed.

S&F in repair for PVC Floor trap 75 mm complete all as specified and directed.

S&F in repairs, 75 mm dia Cast iron Floor trap with CP grating including jointing to waste pipe with cement joint, complete all as specified and directed.

S&F in repair, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed.

S&F in repair, 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F in repair, 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F in repair for 160mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F in repair, 15mm bore Stop valves, chromium plated screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm bore dia brass angle valve, chromium plated, complete all as specified and directed.

S&F in repair, 15 mm bore dia bib tap, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair, 15mm bore dia, bib tap standard of PTMT, any colour, high pressure screwed for iron pipe with (Minimum weight 15mm - 90gms), complete all as specified and directed.

S&F in repair, 15mm bore dia, stop valve standard of PTMT any colour, high pressure screwed for iron pipe with (Minimum weight 15mm-90gms), complete all as specified and directed.

S&F in repair, 15mm bore, fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair, 15mm bore, Pillar taps standard of PTMT any colour, fancy type, high pressure, screwed for iron pipe (Minimum weight 110gms), complete all as specified and directed.

S&F in repair, 15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 142 gm), complete all as specified and directed.

S&F in repair, 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 210 gms), complete all as specified and directed.

S&F in repair, 10 litre capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle complete all as specified and directed.

S&F in repair, vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with CP grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; including fixing urinal spreader of PTMT any colour, complete all as specified and directed.

S&F in repair, vitreous china half stall urinal, white, complete including bedded against wall in cement mortar 1:2 pointing around urinal back in white cement complete all as specified and directed.

S&F in repair, vitreous china, white, urinal partition of size 310mm x 700 mm fixed to wall with brass CP screws fixed complete all as spd and directed.

S&F in repair, urinal spreader of CP any colour suitable for 15mm bore dia pipe (min weight 60gms) complete all as specified and directed .

S&f in repair, vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets (visbible portion of bracket painted with two coats of synthetic enamel paint over a coat of primer), any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc fixed complete all as specified and directed.

S&f in repair, vitreous china under counter Basin wash basin, white or ivory colour flat back, size 470mmx350mm excluding taps, waste chain and plug and porcelain stopper but including brackets (visbible portion of bracket painted with two coats of synthetic enamel paint over a coat of primer), any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S & F in repair, vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) fixed complete all as specified and directed.

S&F in repair, vitreous china wash down water closet pan, pedestal pattern, white, including connecting to existing cistern, complete all as specified and directed.

S&F in repair, Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in repair, PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified and directed. Make : Prayag & equivalent.

S&F in repair, PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, complete all as specified and directed. Make : Prayag & equivalent.

S&F in repair, PVC waste pipe 32mm dia, complete with 80 cm long, flexible for WHB/Urinals complete all as specified and directed.

S&F in repair, waste coupling of PTMT (half or full threaded), 32 mm bore (minimum weight 45 gms) complete all as specified and directed.

S&F in repair, plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type, ISI marked, complete all as specified and directed.

S&F Rotational moulded polythene water storage tank of 500 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

S&F Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

S&F Rotational moulded polythene water storage tank of 5000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, complete all as specified and as directed.

S&F 15mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting chasing into wall and making good as per existing specifications etc complete all as specified and as directed.

Fixing only 15mm bore dia, old steel tubing and connection in new or old position (Wall, ceiling, floor etc) including new fittings after cleaning of old pipe complete all as specified and directed.

Taking up or down 20mm bore dia steel tubing and connection, complete all as specified and as directed.

S&F 20mm bore dia tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting chasing into wall and making good as per existing specifications etc complete all as specified and as directed.

Fixing only 20mm bore dia, old steel tubing and connection in new or old position (Wall, ceiling, floor etc) including new fittings after cleaning of old pipe complete all as specified and directed.

M&L for disconnecting of PVC tank of capacity not exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatment of roof slab beneath the tank in following laid down process all as specified and directed :- a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank d) Refixing the tank with fittings as required in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as specified and directed.

M&L for disconnecting of PVC tank of capacity exc 501 Ltrs but n.exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatment of roof slab beneath the tank in following laid down process all as specified and directed :- a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank d) Refixing the tank with fittings as required in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as specified and directed.

M&L for disconnecting of PVC tank of capacity exc 1001 Ltrs but n.exc 2000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatment of roof slab beneath the tank in following laid down process all as specified and directed :- a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank d) Refixing the tank with fittings as required in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as specified and directed.

S&F in repair, grating doom, 125 mm dia with waste hole of PTMT (Min wt 40g) complete all as specified and as directed.

S&F in repair, flexible health faucet with clamp suitable for 15 mm bore dia pipe, complete all as directed.

S&F in repair, CP Central hole Basin Mixer with copper pipe as per sample, complete all as directed.

S&F in repair, wall mixer, telephonic type, chromimum plated with CP wall flange suitable for 15 mm bore dia pipe, complete all as directed.

S&F in repair, CP over head shower, single flow, self cleaning type with arm suitable for 15 mm bore dia pipe, complete all as directed.

S&F in repair, sheet glass shelf assembly consisting of 5.5mm thick glass, 1st quality, shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.

S&F in repair, swivel shower of PTMT, any colour and fixed with 15mm bore dia pipe (Minimum weight 40 gms) complete all as specified and directed.

Fixing only after repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets , complete all as directed.

S&F in repair, PVC cover with hinges and locking arrangement for PVC water tank of capacity n.exc 500 Ltrs complete all as directed.

S&F in repairs of PVC cover with hinges and locking arrangement for PVC water tank of capacity exc 500 litre but n.exc 1000 litre complete all as directed.

S&F in repair, CP toilet paper holder including all fittings and fixtures as per sample complete all as directed.

S&F PVC bathroom cabinet with mirror of size 500mm x 400mm including all necessary fixing arrangement complete all as directed.

S&F in repair, 50mm bore, high density polyethylene (HDPE) pipes of required pressure, single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F in repair, sinks with drainage board, made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm, complete all as specified and directed.

S&F in repair, vitreous china one piece EWC, standard size, white/ivory colour, wall hanging and floor mounted with dual flushing cistern white including P or S trap , complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris outside the defence land complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-0, (using 12.5mm graded stone agg) as in floor etc complete all as specified and directed.

S&F in repair, 125mm hasp and staple, aluminium anodised type with mild steel type screws for fixing etc, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence land all as specified and directed.

M&L for brickwork with subclass `B' bricks, using old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with sub Class ‘B’ bricks straight or curved on plan to any radius as in half brick thick wall, built in cement mortar 1:4, in any location, complete all as specified and as directed.

M&L for 10 mm thick vitrified floor tile, light shade (square/rectangular), polished, of size 600mm x 600mm / 605mm x 605mm over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for 10 mm thick vitrified tile as in vertical surfaces, light shade (square/rectangular), polished, of size 600mm x 600mm / 605mm x 605mm over and including 10mm thick backing layer in cement mortar 1:4 for laying skiring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for glazed coloured ceramic tiles on internal/external wall, in vertical surfaces 300mm x 450mmx7mm thick, over & including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for glazed coloured ceramic tiles as in vertical surfaces, 300mm x 200mm x7mm thick, over & including 10mm thick rendering in cement moratr 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, over & including 15mm thick screed bed or bedding layer in cement mortar 1:6, for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

S&F 4mm thick (20mmx20mm) size glass mosaic tiles, of approved make and pattern and back of each piece is line grooved and fixed with adhesive on the surface and fixed on wall surface complete all as specified and directed.

M&L for 15mm thick rendering on brick, concrete or dubbed surfaces in cement mortar 1:4 finishing even and smooth without using extra cement and similar work,height upto 4 storey height including necessary scaffolding and taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside the defence land complete all as specified & directed.

M & L for 15mm thick rendering on brick, concrete surfaces in cement mortar 1:6 finishing even and smooth without using extra cement and similar likes, height upto 4 storey including necessary scaffolding, including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside the defence land complete all as specified & directed.

M & L for rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, fascia, fins, parapet etc and similar likes, height upto 4 storey, including necessary scaffolding, ladder, formork and including taking down cement plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed.

M&L for prepaing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer, height upto 4 storey, including necessary scaffolding, ladder & formwork etc complete all as specified and as directed.

M&L for preparation of new plastered/concrete surfaces of walls/ceiling and applying two coats of cement base paint over a coat of primer, including necessary scaffolding etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick, as in patches in random location/scattered places, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for machine cut kota stone slab in riser of steps, skirting, dado, 20-25 mm thick over & including 10 mm thick rendering in cement mortar 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M&L for grinding & polishing of old kota stone/ marble/ baroda green floor/skirting with machine, in and including making good of wall finishes as per original specifications complete all as specified and directed.

S&F Dholpur stone, 16 to 18mm thick, cladding gang saw cut with machine cut edges, uniform colour of each stone, size exc 0.25 sqm area and not exc 0.5 sqm fixed with and incluing one number ss clamps (grade-202) of flat iron 30mmx2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastner, polishing, rubbing & including silicon treatement, over and including rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface finished even & fair on brick wall or concrete surface etc complete all as specified and as directed.

M&L granite, 16-18 mm thick stone slab work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall, also and like over and including 12mm thick screed bed or bedding layer in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence complete all as specified and directed.

M&L for marble work, Makrana white slab, Marble/ white marble, 15 to 17mm thick (table rubbed and polished) to mirror finish border in kota stone flooring, steps, jambs, pillars, window cills, cooking platforms and like over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble and including dismantling of existing stones and removing the debris outside the defence complete all as specified and directed.

M&L for complete removal of existing treatement from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using a thin layer of putty to obtain smooth regular/even finish using sand paper and applying two coats of oil bound distemper complete all as specified and directed.

Dismantling brick tiles or PCC tiles, single layer on roof and removal of unserviceable material out side MoD land upto distance exceeding 1.5Km but n.exc 3Km, complete all as specified and directed.

Taking down existing bitumen felt including cement mortar bedding padding and cleaning the surface and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 3Km, complete all as specified and directed.

Demolition of mud in roof, any thickness, including plastering and leaping (whether full thickness removed or nly a part thereof) and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 3Km, complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (12.5 mm graded stone agg ) as in padding on roof to maintain desired slope, complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching , including use and waste necessary form work, complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 0.200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound, complete all as specified and directed.

Material and labour for applying a coat of bitumen primer @ 0.3Kg /sqm conforming to IS : 3384 and laying 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100 mm side lap and 150 mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2 kg per sqm and blinded with clean dry sand @ 0.5Kg/sqm over the APP membrane on roof, complete all as specified and as directed. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.

Material and Labour for applying two coats of solar reflective bituminious aluminium paint over APP membrane @ 0.20Kg/Sqm for two coats, complete all specified and directed.

Material and labour for powder coated aluminium (minimum thickness of polyester powder coating 50 micron) work for fixed frame portion and shutters of doors, sliding door (any track), openable windows, ventilators, partitions sliding/openable with extruded built up standard tubular section/appropriate Z section and other section conforming to IS : 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/gauged/paneling, CP brass/stainless steel screws including dismantling old, complete all as specified and directed.

M&L for aluminium composite panel sheet of colour and shade as approved by GE of 4mm thickness which consists of 3mm thick termoplastic core of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 u PVDF & inner surface finished with a thin coat of polyster paint, cladding panel fixed to aluminium grid of size n.exc 2 sqm and size of section shall be 38mm x 50mm x 1.5mm thick, aluminium grid fixed to wall by FI clamp 25 x 6mm with spacing not more than 1m c/c, colour shade and pattern as approved by GE upto 25 Mtr heght including all necessary frame work including dismantling old complete all as specified and directed.

S&F in repair 5 mm thick float glass, tinted/smoked shade fixed to frame for door/window/partition etc including aluminium powder coated snap beading and rubber gasket complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed

S&F in repair door closer aluminium (Die cast) body, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed

S&F in repair 180 mm size Powder coated(any tint) aluminium "American Handle" fixed to aluminium door with suitable screws complete all as specified and directed

S&F in repair 200mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified and directed

S&F in repair mild steel Mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter complete all as specified and directed.

Supply & laying false flooring size 600x600x35mm HPL (high pressure liminate), point load 360Kg per square inch uniformaly distrubuted load 1350 Kg per sqm FFH 500mm complete all as specified and as directed. Make : TANKARIA/CAMFLOOR/FLEXI ACCESS FLOOR

Supply and fixing in repair pre-laminated particle board, 18/19mm thick dark brown colour, interior grade, medium density, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Material and labour for clean sawn second hardwood in frame work complete all as specified and directed.

Material and labour for teak wood lipping 6mm thick fixed to 18/19mm board with nails, complete all as specified and directed.

S&F in repair 40mm width continuous (piano) hinges mild steel, bright finish or electro galvanised, complete all as specified and directed

Note:- Amount of credit of Rs. 61395.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

TARLOCHAN SINGH AND CO

R K Enterprises

MS FUTEC ENGINEERS

M/s Bhagwati Enterprises

KUMAR AND COMPANY

Anil Kumar Gupta