Construction of 220 KV Jaffarpur to Rudrapur Single Circuit 2 Phase Railway Transmission line on DC Towers

Amount

Part-A (Supply )

Fabrication, Galvanizing & Supply of Normal Stub (Material Grade E250 For MS & E350 For HT of Quality B0) for various type of towers with cleat including Nuts & Bolt.

For 2AS type tower (0°- 2°)

For 2BS type tower (2°- 30°)

For 2CS type tower (30o- 60o)

Fabrication, Galvanizing and supply of various type of complete lattice towers (Material Grade E250 For MS & E350 For HT of Quality B0) with bolts & nuts, step bolts, pack washers, spring washers, D-shackles including Body extensions and Leg extensions.

2AS Type tower (0 deg. - 2 deg) including 3 mtr., 6 mtr. & 9 mtr. Body Extensions.

2BS Type tower (2 deg. - 30 deg) including 3 mtr., 6 mtr. & 9 mtr. Body Extensions

2CS Type tower (30 deg. - 60 deg) including 3 mtr., 6 mtr. & 9 mtr. Body Extensions

Galvanized Template of 2AS type tower including Bolts, Nuts & washers etc.(2 Nos.)

Galvanized Template of 2BS type tower including Bolts, Nuts & washers etc.(1 Nos.)

Galvanized Template of 2CS type tower including Bolts, Nuts & washers etc.(1 Nos.)

ACSR Zebra Conductor

GS Earth wire 7/10 SWG

Single Tension fitting for Single ACSR Zebra Conductor suitbale for 160 KN Disc Insulator

Double Tension fitting for Single ACSR Zebra Conductor suitbale for 160 KN Disc Insulator

Suspension fitting for Single ACSR Zebra Conductor suitbale for 90 KN Disc Insulator

Pilot fitting suitable for Single ACSR Zebra (90 KN Disc Insulator)

Tension fitting for GS Earth wire 7/10 SWG

Suspension fitting for GS Earth wire 7/10 SWG

Disc Insualtor 160 KN

Disc Insualtor 90 KN

220 KV, 160 KN porcelain Long rod Insualtors

220 KV, 90 KN porcelain Long rod Insualtors

Accessories for conductor & earth wire

Vibration damper for Zebra Conductor

Vibration damper for GS earth wire 7/10 SWG

Flexible Copper Bond

Repair sleeve for ACSR Zebra conductor

Mid span compression joint for ACSR Zebra Conductor

Mid span compression joint for GS earth wire 7/10 SWG

Supply of following tower accessories

Number plate

Danger Plate

Circuit Plate (set of two)

Phase Plate (set of three)

Anti-Climbing device

Birds Guards (set of six)

Pipe type earthing

Description of Work / Item(s)

Amount

Part-B (Erection)

Priliminary survey, Route alignment, detail survey, tower spotting, profiling including preperation of tower schedule, Check survey, pegmarking of locations,Optimisation of tower locations etc.

Setting of Normal Stubs, inlcuding all foundation work but excluding the cost of concreting and excavation.

2AS Type (0o- 2o ) tower

2BS Type (2o- 30o ) tower

2CS Type (30o- 60o) tower

Concrete for RCC type foundations including all material, shoring and shuttering if any, forming, concreting and curing of water inlcuding cost of cement for concrete (cost of supply of MS steel bar is not to be included)

Excavation of foundation pits including all earthwork, backfilling and levelling etc.

Super structure erection of various type of towers, tower part, tower extention (complete) with bolts & nuts and including all work above ground level excluding hoisting of insulators & fitting of danger plate, number plate, phase plate, circuit plate, anti climbing devices and bird guards, but including punching of bolts.

2AS type tower including Erection for 3 mtr., 6 mtr. & 9 mtr. Body Extension

2BS type tower including Erection for 3 mtr., 6 mtr. & 9 mtr. Body Extension

2CS type tower including Erection for 3 mtr., 6 mtr. & 9 mtr. Body Extension

Laying, Stringing Tensioning, clamping, jointing etc. complete with ACSR Zebra conductor including hoisting of insulators and fitting of vibration dampers, jumpers at tower etc. for complete route of single Circuit line (2 Phase) on D/C tower with single Zebra conductor.

Laying, Stringing, Tensioning, clamping, jointing etc. complete with single earth wire 7/10 SWG including fixing of clamps and all accessories.

Grounding work for Pipe type earthing including excavation and backfilling (Set of Two).

Protection work as per given below:

Excavation in earth for revetment work.

Cost of cement concreting required for bottom pad for revetment work in 1:4:8 ratio.

Brick work in ratio 1:4

Cost of cement Concreting required for top pad for revetment work in 1:3:6 ratio.

Plastering in ratio 1:4

Providing weep hole with 65 mm PVC pipe.

Earth filling in tower footing include borred earth.

Tack welding on bolts and nuts on Ist section of towers with application of zinc rich primer and two coats of enamel paints.

Fixing of tower accessories:

Danger plate

Number plate

Phase Plate (set of three)

Circuit Plate (set of two)

Anti-Climbing device

Birds Guards (set of six)

M.S. Steel bar for reinforcement

Description of Work / Item(s)

Amount

Total Part-A (Supply ) from BoQ1 sheet WITHOUT GST

Total Part-B (Erection ) from BoQ2 sheet WITHOUT GST

Add GST* Amount on (Total of Part-A + Total of Part-B above)

unitech power transmission limited

TRANSGLOBAL POWER LIMITED

R.S INFRAPROJECTS PVT. LTD.

unitech power transmission limited

TRANSGLOBAL POWER LIMITED

R.S INFRAPROJECTS PVT. LTD.

unitech power transmission limited

TRANSGLOBAL POWER LIMITED

R.S INFRAPROJECTS PVT. LTD.