Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.0 L
EMD Value
₹10,100
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Electric (R&B) Division, Rajkot
A&A to E.I. ,Ceiling Fan and Indoor and Outdoor Light Fittings in ITI ATS Hostel and B.K. Modi Pharmacy College Old and New Boys Hostel at Rajkot.
364258
11 of 2026-27
Open
Electrical Works
Works
Rajkot
8 documents required · 8 mandatory
₹900
Executive Engineer, Electric (R&B) Division, Rajkot.
₹10,100
6 Nov 2026
6 Nov 2026
6 Nov 2026
20 Nov 2026
6 Nov 2026
90 days
Name of work: A&A to E.I. ,Ceiling Fan and Indoor and Outdoor Light Fittings in ITI ATS Hostel and B.K. Modi Pharmacy
College Old and New Boys Hostel at Rajkot.
Item Quantities estimated Item of work Tendered Rate Total amount
Item Quantities estimated Item of work Tendered Rate Total amount
No. but may be more or less according to
Qty. Unit estiamted
Replacing Old & u/s by Point wiring for Light / Bell with 2-
1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 kV grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length , in below type of pipe erected with
6A Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC /
1 103.00 Pt. Metallic/Wooden box, single mounting base frame covered 539.34
with textured/metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed. (a) with
medium class Rigid PVC pipe and accessories erected flushed
on wall/ceiling complete Cat. III
Light Point ( Bathroom , Toilet , Washarea ) Cat. III
Replacing Old & u/s by Point wiring for FAN with 2-1.5
sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 kV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected
with 6A Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with earth
2 43.00 Pt. continuity of following type erected on PVC / 765.58
Metallic/Wooden box, single mounting base frame covered
with textured/metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected. with necessary ceiling rose
/ H.D.Connector as directed.. (a) with medium class Rigid
PVC pipe and accessories erected flushed on wall/ceiling
complete cat-III
Replacing Old & u/s by Point wiring for Individual Plug with
& earth wire of 1.5 sq.mm (Green) both are of ISI marked
kV grade FRLS PVC insulated multi strand copper wires up to
10 mtr length, in below type of pipe erected complete with
Modular type switch & 5 pin Plug erected on PVC /
Metallic/Wooden box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe erected with
following type of accessories. [I] For 6A Plug and 6 a switch
with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db
board (a) with medium class Rigid PVC pipe and accessories
erected flushed on wall/ceiling complete cat-III
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.
Wire from mcb db board. (a) with medium class Rigid PVC
pipe and accessories erected flushed on wall/ceiling complete
Replacing Old & u/s by Point wiring for on board Looped Plug
with 6A Modular type switch & 5 pin socket erected on PVC /
Metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate modules erected on
/ in wall / ceiling with following type accessories Cat. III
Point wiring for Two Way Controlled Light Point with 2-1.5
sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI
marked 1.1 kV grade FRLS PVC insulated multi strand copper
wires erected in below type of pipe with 6A Modular type
switches and following type of accessories erected on PVC /
Metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected. with necessary
batten/angle holder or ceiling rose or H.D.Connector as
directed..(a) with medium class Rigid PVC pipe and
accessories erected flushed on wall/ceiling complete Cat. III
Providing & erecting PVC Corrugated Flexible Conduit with
6 100.00 Mtr. required nos. of coupling, PVC bushes, Check-nuts etc. 21.21
complete of following sizes.(2) 25 mm
Item Quantities estimated Item of work Tendered Rate Total amount
Item Quantities estimated Item of work Tendered Rate Total amount
No. but may be more or less according to
Qty. Unit estiamted
Replacing Old & u/s by Providing and erecting Mains with
kV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour
for earth continuity of following size (A) With medium class
Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
Replacing Old & u/s by providing and erecting Mains with
kV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected in / on
8 130.00 Mtr. wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC 326.23
insulated stranded wire of green colour for earth continuity of
following size (A) with medium class Rigid PVC pipe and
accessories (h) 4 wire 6 sq. mm
Replacing Old & u/s by providing and erecting Mains with ISI
marked, 1.5kV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC insulated conforms
to IS 694, IEC - 227 erected in existing pipe of following size
(Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper
lugs, nuts and bolts if required.(i) One wire 35.00 sq. mm
40 Mtr. (g) One wire 16.00 sq. mm 177.76
Providing & erecting Switch board for Computer or electric
apparatus consisting of following modular type accessories
mounted with PVC / Metallic concealed/open box with single
mounting base frame covered with textured/metallic /white
front plate,modules erected with necessary connections as
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III
Replacing Old & u/s by Supplying and erecting LED indoor
fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. & corrosion
resistance with diffuser with company mark/name 160V to
270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
11 116.00 Ea. Luminaire efficacy> 85 lumens/watt ,LED 535.30
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Tube Light with integral
driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet
Supplying and erecting led lamps with following wattage
capacity of 220 to 240 voltage, minimum 15000 burning hours
life, 500 V in built-surge protection,Polycarbonate diffuser,
12 28.00 Ea mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 188.87
(A) LED Lamps integral type, with PC diffuser suitable LAMP
holder (iii) 10 to 15 watts Cat-III
Replacing Old & u/s by Providing and erecting Approved
make Four pole moulded case circuit breaker having breaking
capacity ICU of 35 KA. at 415 V. having normal current rating
125A. with Fixed thermal & magnetic release suitable to work
on A.C.supply 50 Hz. with all internal connections, spreader
tinned copper & complete erected in existing 16 G.M.S.
housing. ICS=100% of ICU only Cat III
Replacing Old & u/s by Supplying and erecting triple pole &
neutral 440V / 500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density not more
than 1.6 Amp. / sq.mm (Rated current / cross section area) duly
14 0.50 Rn. Mtr wrapped with colour insulating tape for phase sequence of 1961.42
following current carrying capacity, erected with necessary bus
bar supports /insulators, main cable socket to each bar, erected
in existing cubical panel with necessary connections.(A)
Suitable for 100 Amp. Capacity
Item Quantities estimated Item of work Tendered Rate Total amount
Item Quantities estimated Item of work Tendered Rate Total amount
No. but may be more or less according to
Qty. Unit estiamted
Replacing Old & u/s by providing and erecting Miniature
circuit breaker single pole 6A to 25A suitable to operate on
15 102.00 Ea 240 V A.C. system and having breaking capacity 10 KA to be 123.22
erected in existing box. confirming to IS 8828/1996 with ISI
Replacing Old & u/s by Providing & erecting 415 V MCB
Four Pole for Motor & Inductive Load (C Curve) having
10KA breaking capacity & confirms to IS :8828 in existing box
having following capacity (b)40 Amp.cat-III
2.00 Ea (c)63 Amp. Cat.III 811.03
Replacing Old & u/s by Providing and erecting Sheet Steel
powder coated MCB distribution board - flush / surface
mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without
17 2.00 Ea MCB to house appropriate nos. of MCBs.(The DBs should be 2913.85
used of same company of MCB to be used) suitable for (B)
three phase incoming and single phase horizontal type
outgoing Per phase isolation type (PPI) (b) sheet steel double
(B) three phase incoming and single phase horizontal type
1.00 Ea outgoing Per phase isolation type (PPI) (b) sheet steel double 2339.16
(B) three phase incoming and single phase horizontal type
4.00 Ea outgoing Per phase isolation type (PPI) (b) sheet steel double 3412.79
door (iii)8 way
providing and erecting Approved make RCCBs conforming to
IS: 12640 and having sensitivity of 30 mA and Short Circuit
withstand capacity of 10 KA and suitable for operation on
18 21.00 Ea single phase 240 V,50Hz. having characteristic of quick action 2458.34
& tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as
directed (ii) 40Amps. DP Cat. III
Providing and erecting Annealed bare Copper wire 4.064mm
Supplying & erecting earth pit of minimum bore dia.150mm
size approved make Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 50mm having 80-
200 Micron galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following
type of applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test certificate
including value of earth resistance of installation duly stamped
and signed by agency and officer Incharge has to ensure the
value of earthing resistane mentioned in test Certificate) &
having back filling compound of
(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /
meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at
no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain
1.00 Ea moisture for long time Necessary test report must be submitted 4591.46
by Agency. (a) For Electrical Installation up to 440V in normal
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Replacing Old & u/s by Providing & erecting weather proof,
dust & vermin proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above protection as
per approval from engineer incharge made from 14 SWG thick
CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories
supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley
as per requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-aluminium strips,
rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts, foundation
flange - bolts-base Plates, sufficient nos. of hinged doors,
handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice board,necessary
ventilation,earthing strip complete.
Item Quantities estimated Item of work Tendered Rate Total amount
Item Quantities estimated Item of work Tendered Rate Total amount
No. but may be more or less according to
Qty. Unit estiamted
The Panel shall be painted with epoxy powder coating. (The
rates excludes the cost of switchgears, bus bars, inter
connecting mains & Copper Aluminium strips, meters, Fuses
etc. The dimension shall be measured excluding base beams)
The panel shall be supplied with following approved
manufacturers with following size(B) The standard companies
switch gear shall be used and only manufacturers at CPRI
approved factory (i) with 350mm depth
Providing , erecting , fabricating the M.S. structure as per
requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections complete
with cutting, welding, grinding & finishing duly painted with
one coat of red oxide with erection on site as per direction of
engineer in charge with necessary grouting, cementing,
plastering & finishing complete. ( 40 Kg Per Panel = 1 * 40 )
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor for 1.1 kV.
23 5.00 Mtr. to be laid on wall with necessary clamps or in existing trench / 454.50
pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (
35 Sq. mm 1/2 core)
Providing and, fixing heavy duty flange type brass double
compression type cable gland with rubber ring for PVC
24 2.00 Ea insulated armoured cable complete with out going tails, 103.02
insulating tape etc for following size of cables(C) 3 & 1/2
Solder less crimping type Aluminium lugs conforming to IS
suitable for cable of following size evenly crimped with high
25 8.00 Ea pressure tool & connected to switchgear terminals with 25.25
brass/cadmium plated nut bolts in an approved manner. ((E)
Solder less crimping type Copper lugs conforming to IS
suitable for cable of following size evenly crimped with high
26 20.00 Ea pressure tool & connected to switchgear terminals with 12.12
brass/cadmium plated nut bolts in an approved manner. (C)
Replacing Old & u/s by Providing & erecting Approved make
Power Saving 45 - 50 Watt Ceiling Fan with double ball
bearing ISI mark with Condenser 230 volt A.C. 50 Hz
mm sweep complete having 3blades with aluminium blades
with , canopy & 30 cm. down rod erected with earthing.(Make
shall be approved by Engineer in charge))
Supplying and erecting 19 / 20 mm. nominal bore Medium
Class M.S. Pipe down rod erected duly painted for fan
complete with proper insulation without leakage and earthing.
Supplying & erecting approved make SMC press moulded
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN
rail for mounting mob & hinged doors as per requirement
having locking arrangements with mounting clamp with nuts,
bolts & washers suitable for erection on pole with cable
clamps& earth bolt of following size of box.(B) 250mm x
200mm x 100mm [deep]
Replacing Old & u/s by Supplying and erecting B class
galvanised iron pipe 32 mm outside dia 45 cm long duly
30 35.00 Ea welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, 343.40
erected on wall or corner for mounting street light luminaire
with necessary hardware materials duly painted.
Providing and erecting ISI mark Medium class RIGID PVC
PIPES of following size complete to be erected on/in wall or
31 60.00 Mtr ceiling erected with necessary PVC fittings & Junction boxes 24.24
fixed with adhesive solution & Clamps with following dia of
pipes, in approved manner as directed (a)20 mm
Item Quantities estimated Item of work Tendered Rate Total amount
Item Quantities estimated Item of work Tendered Rate Total amount
No. but may be more or less according to
Qty. Unit estiamted
Replacing Old & u/s by Supplying and erecting LED street
light / Flood light fittings with High power White LEDs
wattage of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free High
pressure die cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with
32 company mark/name engraved or embossed 160 to 270 0.00
V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy>
lumens/watt . LED driver efficiency > 85 %.( fittings required
LM-79 & LM-80 certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between
the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and
10.00 Ea ,Light must have 440VAC line supply with over-voltage 5080.30
protection.(iii) 60 - 89 watts Cat-lll
(A) Street Light (IP-65), Surge protection -4KV integral and
25.00 Ea ,Light must have 440VAC line supply with over-voltage 5581.26
protection (iv) 90 - 119 watts Cat-lll
providing and erecting Miniature circuit breaker single pole
0.5A to 2A system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI
Replacing Old & u/s by Providing and erecting FRLS-XLPE
(IS:7098)(I)-88 ISI armoured cable multistrand / Solid
34 360.00 Mtr Aluminium conductor for 1.1 kV. to be laid on wall with 151.50
necessary clamps or in existing trench / pipe of following size
of cables (B) 4 core 6 Sq. mm
Replacing Old & u/s by Supplying and erecting Flexible PVC
insulated multi strand multi core 1.1 kV grade ISI marked
copper wires of following size to be erected as directed.(e)
Sq.mm 3 core round PVC sheathed
Providing & laying approved make ISI marked HDPE 6Kg /
cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at
36 500.00 Mtr road crossing on or floor as directed for laying of cable. The 108.07
pipes as following size of dia & weight per 6 mtr.(A) 40 mm
Supplying and erecting approved make Instantaneous type
water heater with 3Itr.capacity rust free container housed in
ABS plastic body insulated with glass wool / puff insulation
37 12.00 Ea and 3 Kw heating elements,adjustable thermostat 300 C to 850 4370.27
C with set to operate at 850 C (+ /-60 C ) auto reset indication
lamps, thermal cut-out, safety valve fusible plug etc. Cat.III
Supplying and erecting approved make panel mounting type
Digital Voltmeter having 3 digits LED display, 0 to 750 AC
38 1.00 Ea Volts range erected on existing panel board with all 1275.63
connection, wiring etc .with manufacturers calibration
Supplying and erecting approved make panel mounting type
Digital Ammeter having 3 digits LED display, external CT
operated, calibrated for 0 to 1000 Amps suitable to operate on
500 Volt AC , erected on existing panel board with all
connection, wiring etc .with manufacturers calibration
Supplying and erecting Ammeter / Voltmeter selector switch
40 2.00 Ea for 3 phase AC Supply 500 V on existing panel board with 317.14
necessary connections.
Providing & erecting L.T. Current Transformer with bar
primary 50/5 to 1000/5 ratio 15 VA burden erected in existing
CRCA box duly secured with insulating materials connected to
Item Quantities estimated Item of work Tendered Rate Total amount
Item Quantities estimated Item of work Tendered Rate Total amount
No. but may be more or less according to
Qty. Unit estiamted
Supplying and erecting approved make suitable panel indicator
42 3.00 Ea LED type lamp, lens cover, complete erected with necessary 43.43
Note:- The Credit of dismentalled materials for Rs.23878.00 shall be recovered from the First R.A. bill payable to the contrator and
there after the dismentalled materials shall be the property of the contractor.
I/We am/are willing to carry out the work at__________________% above/below (in
figures)_____________________________________percent Above / below (in words) the estimated rates mentioned above amount of my\our
tender works out as under :-
Estimated amount put to Tender Rs. _________
Deduct________% below Rs. _________
Net Amount Rs. _________
Estimated amount put to Tender Rs. _________
Net Amount Rs. _________
A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation
regarding material,labour and other factors pertaining to the work before submitting this tender.
B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other
tender documents of this work and agree to execute the same accordingly.
C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the instruction of
Competant Authority on Tender Submitted rate,No Excuse will be Accepted.Hence Contractor are Requested to quote
the rate considering this condition.
D Contractor are requested to quote the Tender by considering that payment will be made after availibility of
grant.Contractor has to start the work immediately after issue of Work Order and as per instruction of Engineer-in-
Charge irrespective of availibility of grant.
E "This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to the
agency as per existing guidelines."
(Signature of the Contractor)
Note 1 Please strike out whichever is not applicable.
2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
ONLINE_NOTICE(R-2)(dn).pdf
ANNEXURE-A (2).pdf
DM (5).pdf
MAKE FOR ELECTRICAL ITEM (3).pdf
SBD.pdf
SCH-B (3).pdf
Contractor_Registration_Paripatra__1_.pdf
EMD GR.pdf
GR for single Tender.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .