Making Commercial /Industrial Modular Kitchen at Central Hospital, Jgjiwan Nagar, BCCL, Dhanbad

Amount

A) HOT KITCHEN

Steam Cooking Vessel Double Jacket Body - Tilting of Size/Capacity 80 Liters :-Steam Cooking Vessel Double Jacket Body - Tilting : Inner & Outer body made of 304 Grade Non-magnetic Stainless Steel Polish Finish. Suitable to use for Industrial Canteens,Hospital. Double Wall Body: For Bulk production Double Jacketed Vessel is recommended. Specially designed each vessel back side steam trap will convert the Steam into water. Inner Body & Base Plate of 3 mm. Outer Body made of 1 mm SS 304 Grade Sheet. Gear Operated & Stand made of SS 16 Swg (1.5 mm) SS 304 Grade Square Pipe.

Steam Generator - LPG Operated of Size/Capacity 200 Liters :-Specially created as per the required purpose Inner Water Tank MS 6 MM Plate. Base Heat Radient Plate 10 mm Thick. Outer Body made of 1 mm Thick SS 304 Grade Plate.

Brat Pan - LPG Operated Tilting Type of Size/Capacity 40 Liters :-Inner & Outer body made of 304 Grade Non-magnetic Stainless Steel Polish Finish. Suitable to use for Industrial Canteens, School, Banquet Kitchen & Bulk Cooking. Gear Operated Tilting Model with Gear Operated Lid with Locking Facility. For LPG Model: One big G10/G11 Burner at bottom along with one Pilot Burner control for Smooth Ignition.

Work Table cum Sink with 1 Under Shelf of Size/Capacity 1800 x 750 x 850H :-Body made of 304 Grade Non Magnatic Stainless Steel Sheet Polish Finish. Top Made of 1.5 mm SS Sheet. Bottom Shelf made of 18 Swg. Sink Size: 17.5 x 17.5 x 10"H. Underneath Structure 38 x 38 x 3 mm MS Angle.

Stock Pot Range - Low Height of Size/Capacity 750 x 750 x 625H :-Body made of 304 Grade Non Magnatic Stainless Steel Sheet Polish Finish. Top Made of 1.5 mm SS Sheet. All Vertical Legs made of 1.5 Inch Square Pipe 16 Swg. Front Panel & Body Cover made of 20 Swg.

Round Frying / Sigree - LPG Operated of Size/Capacity 675 mm Dia x 825 H :-Outer Body made of 304 Grade 20 Swg Non Magnatic Stainless Steel Sheet Polish Finish. Inside Kadai SS & 3 Nos. Leg 1.5" Dia 16 Swg.

Work Table cum Sink with 1 Under Shelf of Size/Capacity 1800 x 750 x 850H :-Body made of 304 Grade Non Magnatic Stainless Steel Sheet Polish Finish. Top Made of 1.5 mm SS Sheet. Bottom Shelf made of 18 Swg. Sink Size: 17.5 x 17.5 x 10"H. Underneath Structure 38 x 38 x 3 mm MS Angle.

Work Table with 2 Under Shelf & 2 Tier Overhead Shelf of Size/Capacity 1800 x 750 x 850+450+250 mm H :-Top made of 304 Grade 16 Swg stainless Steel Sheet. Bottom Shelf made of 18 Swg 304 Grade Sheet. 4 Vertical Legs SS Square Pipe 1.5" 16 Swg with Adjustable Nylon Bullet Feet. Underneath Structure 38 x 38 x 3 mm MS Angle.

Chapatti Maker - Full Automatic with Dough Ball Making Machine of Size/Capacity 300 Pcs / Hr. physical Capacity, Fully Automatic Compact Machine with Dough Ball Diveder Make: of Approved brand and as per instruction of I/C • Capacity: 500 Nos. / Hr. Size of Chapati : 3" to 7.5" Weight of Chapati : 25 to 45 Gms. • Thickness of Chapati : 1 to 2.5 mm • Chapati Baking : Three Conveyor Technology • Pressing Head : Unibody • Gas Connection : LPG or PNG • Gas Consumption : 1.2 to 1.5 Kg. / Hr. • Gas Pressure Required: 0.5 Kg. • Electrical Supply : 230 V • Required Elec. Power : 3.8 HP / Single Phase • Elec. Consumption : 1.9 kW / Hr. • All Contact Parts : Food Grade or SS304 • Electrical Motor & Gear Box : Godrej / Crompton / Elecon & Bonvario • Machine Easy Movable : Yes • Overall Dimensions (Ft.) : 5.25*2*4.8 (L*W*H) • Weight (Kg.) Approx. : 280

Dough Ball Making Machine of Size/Capacity 300 Pcs / Hr. physical Capacity :-Dough ball making machine by Qualimark is a highly sought after product in food processing industry that fastens up the process of making dough for chapati, poori and other flat bread in bulk. The machine is easy-to-operate and clean and can be customized to control the size of dough balls as per the requirement. With smooth dough ball cutting and easy-to-integrate mechanism, the machine promises a great boost in productivity of existing operations without hampering current processes. Developed, designed, engineered and produced using high-grade raw materials and latest technology, the machine is an efficient, durable and functional product, essential for every commercial kitchen.

Spiral Mixer / Dough Mixer Make: Toastmaster Model: HS 42A or equivalent, of Size/Capacity 40 Liters :-Spiral mixer is multipurpose equipment where the attachment move in spiral fashion. It can be used for multiple application like whipping, dough making, mixing and other preparations. Spiral mixer are available between 20 liters to 40liters capacity. Below are various models of spiral mixer available with Hot Max.

SS Gratings with SS Stainer & SS Angel of Size/Capacity 750 x 250 :-All made Top Gratings of 16 Swg SS Square Pipe 3/4. Undernath SS Stainer made of 20 Swg Perforated Sheet. Angle made of 16 Swg SS.

Work Table with 2 Under Shelf of Size/Capacity 2600 x 750 x 850+150 mm H :-Top made of 304 Grade 16 Swg stainless Steel Sheet. Bottom Shelf made of 18 Swg 304 Grade Sheet. 4 Vertical Legs SS Square Pipe 1.5" 16 Swg with Adjustable Nylon Bullet Feet. Underneath Structure 38 x 38 x 3 mm MS Angle. Make:East Zone Engineering

Tea Urn / Thermal Jar of Size/Capacity 20 Liters :-Inner & Outer Body made of 20 Swg SS Sheet 304 Grade. Top Lid made of 18 Swg SS 304 Grade Sheet. Inbuilt fitted 1.5 Kw Rex Water Emerstion Heater with Water Level Indicator. One Thermostatic Control for Temperature .

Bain Marie Food Trolley with 4 Nos. of Round Container with 20 Liters each - Electrically Operated of Size/Capacity 1500 x 650 x 850 H :-Outer Body made of 304 Grade 20 Swg Non Magnatic Stainless Steel Sheet Polish Finish. Inside Water Tank made of 18 Swg 304 Grade SS Sheet. Inbuilt 3 KW Water Emersion Heater Fitted with Thermostatic Control. 4 Nos. Vertical Leg 16 Swg 1.5" SS Sqaure Pipe with Adjustable Bullet Feet.

Masala Grinder - Tiling of Size/Capacity 15 Liters :- Make: | Model: MG15-TT

Potato Peeler - Standard of Size/Capacity 10 Kg. per Filling 100 Kg. per Hr. :-Potato Peeler - Standard. Body made of 20 Swg 304 Grade SS Sheet. Underneath Structre made of 38 x 38 x 3 mm MS Angle. Fitted with Crompon Motor 2 HP, Inise Drum 16 Swg 304 Grader. Inside Chamber Stone.

Work Table with 2 Under Shelf of Size/Capacity 1800 x 750 x 850H :-Top made of 304 Grade 16 Swg stainless Steel Sheet. Bottom Shelf made of 18 Swg 304 Grade Sheet. 4 Vertical Legs SS Square Pipe 1.5" 16 Swg with Adjustable Nylon Bullet Feet. Underneath Structure 38 x 38 x 3 mm MS Angle.

Platform weighting scale of Size/Capacity 250 kgs capacity :- of Approved brand

Platform Trolley / Goods Carrying Trolley of Size/Capacity 900 x 600 x 900 mm H :-Platform made of 18 Swg Non Magnatic Stainless Steel Sheet 304 Grader. 4 Nos. Castor Wheel 150 mm Dia with Break. Push Pull Handle made of 1" Dia Round SS Pipe 16 Swg

Pot Rack / Utensil Rack - 4 Shelves of Size/Capacity 1500 x 750 x 1650H :-All Vertical Leg & Shelf outer Frame made of 1.5" SS Square Pipe 304 Grade. All Runner made of 0.5" Round SS Pipe 304 Grader. 4 Nos. Castor Wheels with Breaks.

SS Gratings with SS Stainer & SS Angel of Size/Capacity 1550 x 950 :-All made Top Gratings of 16 Swg SS Square Pipe 3/4. Undernath SS Stainer made of 20 Swg Perforated Sheet. Angle made of 16 Swg SS .

Single Sink Unit of Size/Capacity 750 x 750 x 850+150 :-Body made of 304 Grade Non Magnatic Stainless Steel Sheet Polish Finish. Top Made of 1.5 mm SS Sheet. Sink Size: 17.5 x 17.5 x 10"H. Underneath Structure 38 x 38 x 3 mm MS Angle.

Roller Table with 1 Under Shelf of Size/Capacity 1800 x 750 x 850"H :-All SS Frame work 1.5" SS Square Pipe 16 Swg 304 Grader. Table Top made of 600 mm roller to swip the Crate. Bottom Shelf made of 18 Swg SS 304 Grade Sheet.

Pot Rack / Utensil Rack - 4 Shelves of Size/Capacity 900 x 600 x 1650H :-All Vertical Leg & Shelf outer Frame made of 1.5" SS Square Pipe 304 Grade. All Runner made of 0.5" Round SS Pipe 304 Grader. 4 Nos. Castor Wheels with Breaks.

SS Gratings with SS Stainer & SS Angel of Size/Capacity 750 x 250 :-All made Top Gratings of 16 Swg SS Square Pipe 3/4. Undernath SS Stainer made of 20 Swg Perforated Sheet. Angle made of 16 Swg SS

Knee pressed hand wash sink of Size/Capacity :-Iceomatic or equivalent

SS Gratings with SS Stainer & SS Angel of Size/Capacity 1550 x 950 :-All made Top Gratings of 16 Swg SS Square Pipe 3/4. Undernath SS Stainer made of 20 Swg Perforated Sheet. Angle made of 16 Swg SS

Hose reel of Size/Capacity :-

4 Door Reach Chiller Make: Elanpro Model: RI 1101C of Size/Capacity 1365 x 755 x 1950 :-Model No. : RI 1100C Capacity: 1100Ltr. Dimension : 48x 30 x 77 Temperature Range : -2.C to 10.C Shelves : 6 Cooling Type: Static

Food serving Trolley with 4 Nos. of Container with 20 Liters each - Non Electrically Operated of Size/Capacity 1500 x 650 x 850 H :-Outer Body made of 304 Grade 20 Swg Non Magnatic Stainless Steel Sheet Polish Finish. 4 Nos. Castor Wheel 150 mm Dia with Break. Push Pull Handle made of 1" Dia Round SS Pipe 16 Swg. Bottom Shelf made of 18 Swg SS 304 Grade Sheet. All four sides covered.

B) Exhaust System ( KITCHEN VENTILATION WORK)

Kitchen hood/ Chimney-SS Hood with SS Filters of Size/Capacity 5500 x 1150 x 450 :-

Kitchen hood/ Chimney-SS Hood with SS Filters of Size/Capacity 2800 x 900 x 450 :-

Duct for Exaust of Size/Capacity SqFeet :-Supply, Fabrication, Installation and Testing of sheet metal ducts complete with vanes, splitter damper hanging arrangement including check nuts in accordance with the approved shop drawings and specifications. 0.63mm thick (24 gauge) GSS

Damper of Size/Capacity Per Pcs :-Supply, installation, testing and commissioning of 50 micron powder coated "Aluminium" collar volume control dampers with key operated of black painted in supply air registers / terminals.

Grill/ Disfuser of Size/Capacity Per Pcs :-Supply, installation, testing and commissioning of 50 micron powder coated Linear Grill/Diffuser

VCD - Volume Control Damper of Size/Capacity Sqfeet :-Supply & Installation of Mannual operated GI VCD

Exhuast Unit of Size/Capacity Nos :-Supply of SISW Backward Fan for Exhaust Unit 9000 CFM and Static Pressure 85 mm wg and fan Impeller to be statically and Dynamically Balanced. Fan section with Fan canvass connection, Belt drive package with taper lock pullies electric motor, Base frame for Fan motor assembly , Vibration isolator and MS C channel base frame. Fan casing sheet 3 mm thick, Impeller 3 mm thick, back Plate 3 mm thick. TEFC foot mounted induction motor suitable for 415V +10% Hz , 3 phase supply , 960 rpm , Insulation class F and IE - 2, Degree of protection IP 55 ,conforms to IS : 325 with Motor canopy. Fan Dia. -900 MM, Fan Make - Nicotra, Kruger, Wolter or Equivalent, Motor MAke - Crompton, ABB, Havells orEquivalent

Blower for Fresh Air of Size/Capacity Nos :-Double skin Modular Extracted Aluminum Profile frame construction with 25 mm thk. Insulated Panel Fan section with Fan canvass connection, drive package with taper lock pullies ,electric motor ,Base frame for Fan motor assembly , Vibration isolator, Access door for maintenance and Angle base frame for unit in 50x5 mm. TEFC foot mounted induction motor suitable for 415V +10% Hz , 3 phase supply , 1440 rpm , Insulation class F and Eff - 2, Degree of protection IP 55 ,conforms to IS : 325. Humidification section with 200 & 50 mm thick cell pad, SS-304 sump ( 18 G ), single phase pump & PVC Internal piping with spray headers. Filter section with 50 mm thk. Wire mesh metallic Pre filter. . 24000 CFM Static- 50-55 MMWC

Unloading, Erection, Commissioning and installation Charges of all above equipments

C) Gas Bank

SITC of Manifold for 4+4=08cy ( Made of 'C' class m.s erw pipeline -25mm having MECV Outlet ) of Size/Capacity Fabricated :-

SITC of Compact valve adopter of Size/Capacity Unitech/Equivalent :-

SITC of Cylinder pigtail Flexible of Size/Capacity suraksha :-

SITC of Non return valve of Size/Capacity Unitech/Equivalent :-

SITC of 1st stage Regulator -15psi of Size/Capacity United :-

Manifold - 15mm L &T of Size/Capacity :-

Gas Bank & Each Bank - 25mm of Size/Capacity :-

SITC of Pressure Gauge (0-1/2/4/10kg) of Size/Capacity RR :-

SITC of SS Ball valve for Pressure guage of Size/Capacity RR :-

Internal Gas Pipeline-SITC of Mainline pipeline m.s 'c' class ERW Pipe line Included Non IBR Seamless fittings include Pointing -25mm of Size/Capacity Metre :-

SITC of Point of Need Control Valve of Size/Capacity :-

SITC of Br. Flexible Pigtails- 4' of Size/Capacity Superseal/Suraksha :-

SITC of Br. Flexible Pigtails- 6' of Size/Capacity Superseal/Suraksha :-

Testing & Commossioning of Gas pipeline of Size/Capacity :-

D) FIRE SUPRERSSION SYSTEM

FIRE SUPRERSSION SYSTEM FOR THE HOODS - DUAL SUPPRESSION SYSTEM - CHEMICAL & WATER of Size/Capacity For the enitre kitchen area (1 unit) :-• Provide a complete automatic wet chemical fire suppression system • The system shall have an overlapping design and cover all equipments under the hood equally • Should provide 100% protection as required by codes, standards, national, state and local requirements. • With a manual pull station to be located in a path of egress. • With heat detection cable in each exhaust duct and above each appliance or groups of appliances protected by a single nozzle. • Distribution piping shell be scheduled 40 for s.s. • With stainless steel pipe drops to the discharge nozzles. • With connection to the building fire alarm system. • Control panel shall have battery backup. • Control Panel shall be capable of indicating any faults. • Control Panel shall have a built in event logger. • The system shall be UL Standard 300. • The Wet chemical shall be SYNX Liquid Fire Suppressant. • The system shall be capable of manual and automatic actuation. • Automatic actuation shall be initiated by heat detection in cables. • Shall include a means of manual release and provisions for fuel shutoff. All complete and as per the instruction of EIC.

FIRE SUPPRESSION SYSTEM FOR THE ABOVE HOOD - UPS POWER of Size/Capacity For the enitre kitchen area (1 unit) :-

E ) Civil Work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

brick flat soling using fly ash brick

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth :Cement Mortar 1:4 ( 1 cement : 4 coarse sand)

Providing, hcisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand derived from natural sources): 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

FINISHING12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)

FINISHING12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)

White washing with lime to give an even shade :New work (three or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

(Analyse Rate) Mirror polishing on marble work/granite/mossaic work where ever required to give high gloss finish complete.One or two time.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

P/F 1st quality glazed digitaly wall tiles (450X300 mm) in all Colours shades burgundy bottle, black in skirting riser of dado of approved brand.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing to existing door frames.30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

P/F cp brass health fuccets with flange with all complete job hindware/jaquar or equivalent

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

P/F C.P two-way (2-way) bib cock with flange hindware/Jaquar or equivalent

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°75 mm bend

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore

Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm

Rate Analysis for Dismentling W.C pan/Comod and p trap disposal up to 50 mtr lead. 2 Nos

P/F PVC P trap 110X110 mm

Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White

Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

P/F factory made wpc door frame of size 75X50 mm with a wall thickness of 5 mm .

P/F 30 mm thick plane solid wpc flash door shutter detailes of cost for one solid wpc door shutter size 2.134X0.915=1.952 sqm (plain) 30 mm solid wpc door shutter as per IS 4020 including carraige with installation water proof and anti termit

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125MM

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :75x47x1.80 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Total impact of GST for the purpose of CTC