Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-Finance | L1 | Accepted-Finance OK | |
| 2 | L2₹7.6 L+₹4,177.20 (0.55%)Accepted-Finance | L2 | Accepted-Finance OK | |
| 3 | Rejected-Technical 202 1ST FLOOR VIVEKANAND PURI MALKAGANJ SARAI ROHILLA NORTH DELHI DELHI 110007 UDYAM DL 01 0065084 | NORTH DELHI | DELHI | 110007 | - | Rejected-Technical non submission of EMD/FDR | |
| 4 | Rejected-Technical 4264 GALI SHAHTARA AJMERI GATE DELHI DELHI 110006 | NORTH DELHI | DELHI | 110006 | - | Rejected-Technical non submission of EMD/FDR | |
| 5 | Rejected-Technical | - | Rejected-Technical as per NIT condition no. 23 |
| Sl No | Description | Qty | Unit | MOHIT KUMAR L1 | ASHMITA ENGINEERS AND TRADERS L2 |
|---|---|---|---|---|---|
| 1.01 | Supply of 10HP,1450RPM motor & SP4L+ type self priming pump of bare shaft of size 100x100mm horizontal foot mounted with suitable coupling, coupling guard and M.S base frame for the above said pump & motor as per requirement.
Make of Pump-M&P Willo/Kirloskar/Jyoti/ DJB Approved
Make of motor-Kirloskar/ABB/Crompton/Jyoti/DJB Approved | 1 | set | 1,69,000 ₹1,99,420 Lowest | 1,80,000 ₹2,12,400 |
| 1.02 | Supply of 4 core, 25mm sq aluminum conductor, PVC insulated armored cable 1.1KV confirming to IS:1554 (Part-I) 1988/7098.
Make of Cable-Grandlay/Gloster/Havells/DJB Approved make | 70 | mtr | 22,750 ₹26,845 | 22,400 ₹26,432 Lowest |
| 1.03 | S I T C of modular/ combinable polycarbonate insulated outdoor type housing shock proof, weather proof, rust proof, UV resistant, Halogen free, silicone free, corrosion proof, protection class: II safe, IP 65, totally insulated, having internal embedded gasket with provision of cable entry through glands. The panel board should have following control panel MCB and accessories etc. complete with connections & interconnections etc. as required.
Note 1: For mounting of metering & outgoing MCBs only box with hinged door with triangle lid to be used.
Note 2: For mounting of 10HP FASD Feeder pillar MS angle frame should be hot dipped galvanized and made out of MS angle of size 35 X 35 X 5 mm at the bottom as per site requirement.
Note 3: All indicating lights and measuring instrument shall be protected by suitable MCBs.
The Panel should consist of followings;-
a) 32 A, FP, 10 kA, MCB - 1 No.
b) 18 A, TP, power contactor - 3 Nos.
c) Side mounting Aux. contact block (L&T)-3 Nos
d) 6 - 10 A over load relay - 1 No.
e) Star delta electronic timer - 1 No.
f) Single phasing preventor - 1 No.
g) Illuminated Push Botton with element - 2 Nos.
h) LED indicating light R, Y, B - 3 Nos.
i) 6 A, 10 kA, SP MCB - 4 Nos.
j) TP digital VAF + PF Cl 1 meter - 1 No.
k) CT 30/ 5 A - 3 Nos.
Make of accessories : L&T/ Siemens/ DJB approved | 1 | Nos | 79,500 ₹93,810 | 71,000 ₹83,780 Lowest |
| 1.04 | Supply of C.I foot valve of 100mm dia. Make of Valve-Kirloskar/IVC | 1 | Nos | 12,000 ₹14,160 | 8,000 ₹9,440 Lowest |
| 1.05 | Supply of M.S heavy Class black pipe of 100mm dia.
Make of pipe-Jindal/Tata | 100 | mtrs | 1,10,000 ₹1,29,800 Lowest | 1,40,000 ₹1,65,200 |
| 1.06 | Supply of M.S Tee of size 100mm X 100mm dia. | 1 | Nos | 760 ₹896.8 | 700 ₹826 Lowest |
| 1.07 | Supply of 100 mm dia sluice valve, PN – 1.0. Make : Kirloskar/IVC/ DJB approved make | 2 | Nos | 48,000 ₹56,640 Lowest | 57,800 ₹68,204 |
| 1.08 | Supply of M.S Bend of size 100mm X 100mm dia. | 10 | Nos | 6,500 ₹7,670 | 6,000 ₹7,080 Lowest |
| 1.09 | Supply of M.S Flange of 100mm dia. | 60 | Nos | 27,000 ₹31,860 | 25,800 ₹30,444 Lowest |
| 1.10 | Supply of Nut bolts & washers. | 60 | kg | 6,600 ₹7,788 | 5,400 ₹6,372 Lowest |
Tender Value
Refer Docs
EMD Value
₹15,200
Closing Date
19 Nov 2025, 3:00 pmClosed
Sh. Yogesh Lohchab
Wazirabad Water Works
SITC of pump set for scours at clarifier no. 3 and 4 at 1st 40 MGD plant at Wazirabad Water Works.
2025_DJB_281184_8
NIT No. 13 (2025-26)
Open Tender
Miscellaneous Works
Item Wise
60 days
Wazirabad Water Works
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
DJBEMD A/c No-50448339804
₹15,200
1 Dec 2025
13 Nov 2025
19 Nov 2025
13 Nov 2025
19 Nov 2025
13 Nov 2025
13 Nov 2025 - 19 Nov 2025
Supply of 10HP,1450RPM motor & SP4L+ type self priming pump of bare shaft of size 100x100mm horizontal foot mounted with suitable coupling, coupling guard and M.S base frame for the above said pump & motor as per requirement. Make of Pump-M&P Willo/Kirloskar/Jyoti/ DJB Approved Make of motor-Kirloskar/ABB/Crompton/Jyoti/DJB Approved
Supply of 4 core, 25mm sq aluminum conductor, PVC insulated armored cable 1.1KV confirming to IS:1554 (Part-I) 1988/7098. Make of Cable-Grandlay/Gloster/Havells/DJB Approved make
S I T C of modular/ combinable polycarbonate insulated outdoor type housing shock proof, weather proof, rust proof, UV resistant, Halogen free, silicone free, corrosion proof, protection class: II safe, IP 65, totally insulated, having internal embedded gasket with provision of cable entry through glands. The panel board should have following control panel MCB and accessories etc. complete with connections & interconnections etc. as required. Note 1: For mounting of metering & outgoing MCBs only box with hinged door with triangle lid to be used. Note 2: For mounting of 10HP FASD Feeder pillar MS angle frame should be hot dipped galvanized and made out of MS angle of size 35 X 35 X 5 mm at the bottom as per site requirement. Note 3: All indicating lights and measuring instrument shall be protected by suitable MCBs. The Panel should consist of followings;- a) 32 A, FP, 10 kA, MCB - 1 No. b) 18 A, TP, power contactor - 3 Nos. c) Side mounting Aux. contact block (L&T)-3 Nos d) 6 - 10 A over load relay - 1 No. e) Star delta electronic timer - 1 No. f) Single phasing preventor - 1 No. g) Illuminated Push Botton with element - 2 Nos. h) LED indicating light R, Y, B - 3 Nos. i) 6 A, 10 kA, SP MCB - 4 Nos. j) TP digital VAF + PF Cl 1 meter - 1 No. k) CT 30/ 5 A - 3 Nos. Make of accessories : L&T/ Siemens/ DJB approved
Supply of C.I foot valve of 100mm dia. Make of Valve-Kirloskar/IVC
Supply of M.S heavy Class black pipe of 100mm dia. Make of pipe-Jindal/Tata
Supply of M.S Tee of size 100mm X 100mm dia.
Supply of 100 mm dia sluice valve, PN – 1.0. Make : Kirloskar/IVC/ DJB approved make
Supply of M.S Bend of size 100mm X 100mm dia.
Supply of M.S Flange of 100mm dia.
Supply of Nut bolts & washers.
Supply of rubber packing sheet.
Digging and laying work for PVC insulated power cable by digging of earth by manual labour up to the required depth, sand cushioning and protective covering of power cable in the trench etc & refilling the trenches after completion of laying work as per site requirement.
Digging and laying work for M.S pipe line by digging of earth by manual labour up to the required depth for M.S pipe laying from pump set and going parallel to the filter channel up to all scour chambers as per site requirement.
Making of brick foundation upto the suitable height to take water from suction side (Raw water Channel) for pump set. The size of foundation will be 1.85mtr X 1.70mtr X 0.60 approximately as per site requirement
Making of RCC foundation at the top of brick foundation for fixing of M.S.Base frame of pump set with grouting of foundation bolts for Base Frame as per site requirement.
Fixing of electric panel by grouting with CC work. The job includes making foundation for panel as per the height required at site.
Installation charges of all above items including fixing of pump, motor, coupling, coupling guard, foot valve, sluice valve, welding of flanges with pipe, bend, tee’s etc., connecting of pipe line with bends, tee, sluice valve, foot valve etc. as per site requirement.
Fabrication & fixing of Fiber glass sheet shed on the scour pump & feeder pillar in order to protect the motor, pump & other equipment’s from rain to avoid these equipment’s getting rust and moisture. This includes supply of M.S. pipe of 40 mm dia up to the height of 96” so that they can be grouted in the ground with proper RCC work and making roof structure with the help of square M.S. pipe of size 25 mm so that fibre glass sheet can be fixed on the M.S. structure with the help of fasteners.
Primer and Painting of complete pipe line, sluice valve etc with black anticorrosive paint minimum two coats etc. as per site requirement.
Testing & commissioning of complete system on full load.
ASHMITA ENGINEERS AND TRADERS (BID ID -1640570)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
NIT13_8.pdf
Tender Documents • 1.09 MB
BOQ_371471.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .