Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC PLOT NO 28 B NAHAR SINGH JI KA HATHA BHATI CIRCLE RATANADA JODHPUR RAJ 342011 | JODHPUR | JODHPUR | RAJASTHAN | 342011 | L1 | Accepted-AOC L1 AND REASONABLE | |
| 2 | L2₹38.0 L+₹34,104.14 (0.91%)Rejected-Finance 8 481 FAFADIH NEAR RAILWAY CROSSING RAIPUR CHATTISGARH 492001 | RAIPUR | RAIPUR | CHHATTISGARH | 492001 | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹38.0 L+₹37,301.26 (0.99%)Rejected-Finance | L3 | Rejected-Finance NOT L1 | |
| 4 | L4₹39.2 L+₹1.5 L (4.11%)Rejected-Finance | L4 | Rejected-Finance NOT L1 | |
| 5 | L5₹39.2 L+₹1.6 L (4.20%)Rejected-Finance | L5 | Rejected-Finance NOT L1 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
6 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE A JAMNAGAR
INFANTRY LINES JAMNAGAR
PROVISION OF ONE SHELTER FOR STORAGE OF SPARES AND ACCESSORIES (SIZE LENGTH 15 METER, WIDTH 13 METER AND HEIGHT 5.5 METER) FOR AIR DEFENCE FORCE CONTROL RADAR (FLY TRAPPER RADERS) FOR 152 AIR DEFENCE REGIMENT AT MILTARY STN JAMNAGAR
2024_MES_637903_1
8044
Open Tender
Civil Works
Item Rate
270 days
JAMNAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY JAMNAGAR
₹77,000
7 Mar 2024
17 Jan 2024
8 Feb 2024
18 Jan 2024
6 Feb 2024
31 Jan 2024
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and getting out Soft/loose soil complete all as specified and directed by Engr-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas in all kind of soil n. exc 1.5 m depth, width as well as 10 sqm on plan) including getting out complete all as specified and directed by Engr-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas in all kind of soil exc 1.5 m and n.exc 3.00 in depth, getting out complete all as specified and directed by Engr-in-charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth on plan for foundation and for laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.
M&L for PCC 1:3:6, type D-2, using (40mm graded stone aggregate) as foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (design mix), using (20 mm graded stone aggregate) in foundation, including rafts, footings, foundation, beams, plinth beams bases for column etc. complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (design mix), using (20 mm graded stone aggregate) as in columns, pillars piers, posts and struts complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (design mix), using (20 graded stone aggregate) as in beams, roof beams, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (design mix), using (20 graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed by Engr-in-charge.
M&L for form work to sides of concrete, foundation, footings & plinth beams and similar works with rough finished surfaces of concrete in flat complete all as specified and directed by Engr-in-charge.
M&L for formwork to sides of pillar , posts, struts, piers, colums and stanchions with rough finished surfaces of concrete in flat complete all as specified and directed by Engr-in-charge.
M&L for formwork to sides and soffits of floor or roof beams, beams, lintel beam with rough finished surfaces of concrete in flat complete all as specified and directed by Engr-in-charge.
M&L for formwork to soffits/sides of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) with rough finished surfaces of concrete in flat complete all as specified and directed by Engr-in-charge.
M&L for TMT steel CRS bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips , Gde of steel shall be Fe-500d/ Fe-550/ Fe-550d complete all as specified and directed by Engr-in-charge.
M&L for TMT steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips , Gde of steel shall be Fe-500d/ Fe-550/ Fe-550d complete all as specified and directed by Engr-in-charge.
M&L TMTsteel CRS bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips , Gde of steel shall be Fe-500d/ Fe-550d complete all as specified and directed by Engr-in-charge.
M&L TMTsteel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips , Gde of steel shall be Fe-500d/ Fe-550d complete all as specified.
M&L for PCC 1:3:6 pre cast solid cement concrete block masonry with solid block exc 10 CM in width and setting in cement moetar 1:6 complete all as specified and directed by Engr-in-charge.
M&L hard core broken stone or boulders of 63mm gauge, deposited spread and leveled in layers not exceeding 15cm thick watered and well rammed to a true surfaces complete all as specified and directed by Engr-in-charge.
M & L for 100mm thick PCC 1:4:8, type D2, using (40mm graded stone aggregate) as in sub- base of floor complete all as specified and directed by Engr-in-charge.
M & L for 100mm thick PCC 1:1.5:3 type A1, using (20mm graded stone aggregate) as in floor, apron, etc complete all as specified and directed by Engr-in-charge.
M&L Forming construction joint 65mm deep x 10mm wide filled with sealing compound, Grade ‘A’ complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick rendering in CM 1:4 with floating coat 5mm thick 1:3 as in skirting complete all as specified and directed by Engr-in-charge.
M & L for 75mm thick PCC 1:3:6 , type C-2 using (40mm graded stone aggregate) as in plinth protection finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L Forming construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A’ complete all as specified and directed by Engr-in-charge.
M&L for 15mm thick rendering in two layers on concrete surfaces , 1st coat 10mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 with mixing of WPC for second coat finished even and smooth without using extra cement on walls complete all as specified and as directed (NOTE : Supply only WPC will be measured and paid for separately)
Supply only liquid water proofing compound complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces and finising even & smooth without using extra cement on wall complete all as specified and directed by Engr-in-charge.
M&L for 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces and finising even & smooth without using extra cement on ceiling complete all as specified and directed by Engr-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed by Engr-in-charge.
M&L for preparation of new palstered surfaces and appling three coats of white wash on walls complete all as specified and directed by Engr-in-charge.
M&L for preparation of new palstered surfaces and appling three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge.
S&F Steel rolling shutters, thickness of laths 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position , with gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-charge.
S&F Ball bearing for rolling shutter complete all as specified and directed by Engr-in-charge.
S&F Safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed by Engr-in-charge.
M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed by Engr-in-charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soil complete all as specified and directed by Engr-in-charge.
Filling under floors with approved soil including watering and consolidation in layers not exceeding 25cm thick complete all as specified and as directed. (Note : Soil taken from Ser Item No 2 and 3)
M & L for moorum / red bajri filling brought from out side MD land, in floors or paving, laid in layers n exc 25cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-charge.
Removing excavated material to distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-charge.
Removing excavated material to distance exc 250 not exc 500 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick rendering in CM 1:3 on fair faces of concrete surfaces on roof top when concrete is green with mixing of WPC and finising even & smooth without using extra cement and applying evenly a coat industrial bitumen 85/25 at the rate of 1.2 kg per sq.m complete all as specified and directed. (NOTE : Supply only WPC will be measured and paid for separately)
M&L precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and directed by Engr-in-charge.
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including ISI marked heavy duty, PVC rigid conduit of white/ ivory colour including all accessories, heavy duty ISI marked fixed on walls, ceiling etc, with necessary GI base saddles, including mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-
(a) One light point controlled by one, one way switch 5 Amps
(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.
(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
Description all as per item No 44 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed by Engr-in-charge.
S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.
S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.
S & F for switch socket combination 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed.
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified
S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.
S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engr-in-charge.
S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed by Engr-in-charge.
S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed by Engr-in-charge.
S & F for ceiling fan, 230 Volts, 1200 mm sweep with mian air delivary 210 CFM, service value of the fan shall be greater than 6.1 as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with out remote system and electrical connections from ceiling rose to fan teriminal complete all as specified and directed by Engr-in-charge.
S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.
M & L filling dry and clean sand in trenches for cable 8 cm deep below and 15 cm above for cable cushioning complete all as specified and directed by Engr in Charge.
Supplying and laying un-reinforced precast concrete cable cover, LV low voltage type -I flat size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr-In-charge.
Supply, laying, testing of UG LT cable 1100 volts grade, XLPE insulated and PVC sheathed, with multi stranded aluminium conductor, heavy duty conforming to latest IS, passing through cable trench, pipes fixed on wall etc of size 4 core x 10 sqmm complete all as specified and directed by Engr in Charge. (Excavation and earth work, sand cushioning ,brick protection & GI pipe shall be measured and paid for separately).
M & L for GI pipe 40 mm dia Light grade fixing to wall or laying in floors for protection of cable complete all as specified and directed by Engr in Charge.
M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe light grade) and watering pipe 20mm bore GI pipe (medium grade) and chamber PCC (1:4:8) type D2( using 40mm grade stone aggregate), MS FUNNEL with wire mesh ,coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and RCC (1:2:4) type B1 using 20mm graded stone aggregate, pit cover 50mm thick reinforced with 8 mm MS bar at 80mm c/c both way in lieu of CI pit cover with lifting hook including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. incl taking down old earthing complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire and protected pipe 15 mm dia of same size upto 7.5m shall deemed to be included into quoted rate complete all as specified and directed by Engr-in-charge.
SHRI GURMUKHDAS CONTRACTORS PVT. LTD.
S t modi
rajengineers
SIBS CONTRACTOR
M/s Jagdish Machinery Stores
KEVAL ENTERPRISE
Honest builders
M.A. MUNSHI AND CO.
Hirachand Sunderji and co
Haritwal traders
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .