CONSTRUCTION OF A BUILDING FOR YATRI NIVAS AT KANYAKUMARI (PHASE I_ CIVIL AND ELECTRICAL WORKS

Amount

App-A- BUILDING PROPER

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od60117/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum.<br>All work above plinth level upto floor V level

od60118/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum.<br>All work upto plinth level

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

od51007/2020_2021 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:<br>Cement mortar 1:6 (1 cement : 6 coarse sand) including grooved pointing to smooth finish.

4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

50.6.1.3 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

od51036/2020_2021 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure above floor two level upto floor five level for 10 cm thick wall in: CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete

9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

od51049/2020_2021 : Supplying and fixing One Side American Walnut Veneered ( Straight Grains) Vertical Pattern and Other side Laminate (JL 05-Walnut) Flush Door with PVC Wrapped WPC Jamb with One side 65mm Architrave and Other side Tacker. Door 35mm thickness. 4 side PVC Lipping, UV Lacquer Polish on veneer side , Lock Hole Boring, Hinge Rebate cutting (4 Nos.), Sauerland Core filling. Jamb width 100mm Civil Opening Size: 2250X800X35mm or nearest size plus or minus 10cm in height and width

od51055/2020_2021 : Both Side Designer American Walnut Veneered ( Straight Grains) Flush Door frame and shutter with American Walnut Veneer Wrapped Engineered Jamb with One side 65mm Architrave and Other side Tacker. Door 40mm thickness. Both side Inlay (as per design VI 103), 4 side PVC Lipping, All with UV Lacquer Polish, Electronic Lock Hole Boring, Hinge Rebate cutting (4 Nos.), Magic Eye Provision, Sauerland Core filling. Consealed Door Closer Provision required. Jamb width 100mm Civil Opening Size: 2250X1100X40mm or nearest size plus or minus 10cm in height and width

od51056/2020_2021 : Both Side Designer American Walnut Veneered ( Straight Grains) Double Leaf (Equal leaf) Flush Door frame and shutter with Rebate cutting. American Walnut Veneer Wrapped Engineered Jamb with One side 65mm Architrave and Other side Tacker. Door 40mm thickness. Both side Inlay (as per design VI 103) on both leaf, 4 side PVC Lipping (JE 05), All with UV Lacquer Polish, Lock Hole Boring, Hinge Rebate cutting (4 Nos.), , Sauerland Core filling. Jamb width 100mm Civil Opening Size: 2250X1500X40mm or nearest size plus or minus 10cm in height and width.

9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

od51065/2020_2021 : Providing and fixing paneled shutter frame for shutters for doors, windows and clerestory windows including labour for fixing all fittings such as butt hinges, tower bolts, locks etc (cost of fittings paid separately) . complete as per direction of Engineer - in-charge. (Excluding cost of Paneling) Second class teak wood 35 mm thick shutters.

od51069/2020_2021 : Providing and fixing Shutter frame of 40mm thick , excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood 40 mm thick shutter frame

od51072/2020_2021 : Supplying and fixing Teak Wood fixed venetioned 16mm thick( Louvered) shutter including shutter frame of size 90x35mm as per standered drawing to suite the window/door frame already fixed inclusive of labour charges for fixing all fittings but exclusive of cost of fittings etc.complete.

9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane

50.9.12.1 : Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.

od51086/2020_2021 : Providing and fixing 12mm Toughened glass pan for closing openings glass fixed on the wooden frame (already fixed) with Teak wood edge rounded 30x16mm ornamental beading on both sides with nails, Silicon sealant etc.complete.

od51087/2020_2021 : Providing and fixing glazed shutters for doors, windows and clerestory windows , glazed shutters 25 mm to 40 mm thick: using with 8mm thick Toughened glass pane fixed the frame with (already fixed) Teak wood edge rounded 30x16mm ornamental beadings on both sides with nails etc.complete.

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

od51099/2020_2021 : Supplying and fixing Universal centre lock US 20 with EPC or Universal corner lock US 10 (Dorma) for glass door etc.complete.

od51104/2020_2021 : Etching glass pans as per Architectural drawing and directions of departmental officers at site.

od51107/2020_2021 : Supplying and fixing in position Back Coppered mirror (modi float/saint globain) 6mm thick of appropriate sizes as per requirement and fixing with 6mm thick multiwood of the required size of the mirror fixed in the door shutter with silicon sealent etc. complete.The rate including all material cost, labour charges, conveyance, etc complete

9.136 : Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I. sheet ( zinc coating not less than 120 gm/ sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer -in-charge (Dash fastener to be paid for separately ).

9.137 : Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS : 3614 (Part - II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer -in-charge ( panneling to be paid for separately).

od51120/2020_2021 : Providing and fixing Non-asbestos fibre cement board 6mm thick as per IS: 14862 for closing out side Duct door opening using with SS Screws on the frame of teak wood already fixed (frame paid separately) etc.complete<br>

22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

13.17 : 6 mm cement plaster 1:3 ( 1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick

11.27 : Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

9.3.1 : Providing wood work in frames of false ceiling, partitions, etc. sawn and fixed in position:Sal wood

12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

12.45.4 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:Fully Perforated Gypusm Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer - in- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60.

od51182/2020_2021 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:<br>12.5 mm thick Calcium Silicate ceiling Plain Board.

od51183/2020_2021 : Falce Ceiling with 12mm thick Teak planks, planed , lap jointed and wire nailed to wooden frame work etc.complete as per directions.(Wooden frame work paid separately) including PU polishing two coats etc.complete.

od51188/2020_2021 : Supplying and fixing Gyp Ornamental type cornies to false ceiling including painting with Gyp board primer cost of gyp board jointing compound,fiber cloth etc.complete.

od51189/2020_2021 : Sadarahalli slab of size 90x60x5cm flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)<br>25 mm thick

11.34 : 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen (blown type) @2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.

od51190/2020_2021 : Providing and laying Ceramic glazed floor tiles of size 400x800 mm Kajaria RIO BRONZE (thickness to be specified by the manufacturer), or brand and size specified by the Engineer at site, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

od51191/2020_2021 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.<br>Kajaria OSLO OCRE MATT 120x180cm, PULPIS BRONZE 120x180cm, OSLO MARFIL MATT 120x180cm and CEMENTO GRAY 120x120cm or brand and size specified by the Engineers at site.

od51192/2020_2021 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of Kajaria RIO BEIGE 40x80cm or Brand and size approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.7 : Providing and fixing ball bearing for rolling shutters.

10.8.1 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area

13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

od51194/2020_2021 : Melamine polishing on wood work ( two or more coat) including scrapping and cleaning etc. complete.

od51195/2020_2021 : Stone Granite slab work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.<br>18 mm thick (mirror polished and machine cut edge)<br>Granite stone of any colour and shade

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

od51196/2020_2021 : Providing & fixing on roof pressed ceiling (Poovodu) clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

od51197/2020_2021 : MP hip and ridge tiles 1st class set in CM 1:4 including providing coir yarn to avoid cracking and finishing the edges with redoxide in lines and levels etc.complete.

12.51.6 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Gutter (600 mm over all girth)

od51198/2020_2021 : Cement mortar 1:6 bordering to tiled roof about 65cm2 in section etc.complete.

od51199/2020_2021 : Supplying and fixing MS hand rails to fire stair for a height of 1.20 using top rail with 60x40x3.60, Verticals with 40mm MS flate of 10mm thick at 1.10m C/C spacing, Horizontals 2nos with 25x6mm, inside horizontals 12mm MS square rod at 10cm C/C as verticals, including painting with iron primer one coat with synthettic Enamel paint two coats , cost and conveyance of all materials, all welding charges, all fitting charges etc. complete as per the drawing and directions of deptl.officers at site.

od51200/2020_2021 : Supplying and fixing Wooden (Teak wood 2nd Class) hand rails for Balcony and Varandha for a height of 1.20m . Top rail with Teak wood of 7x5cm size, Horizontals bottom above 15cm from floor with teak wood of size 5x3cm and Verticals from floor to top rail 110 cm C/C or nearest spacing with 6x4 cm size,inbetween inside horizontals frame provided with verticals at 12cm C/C 100 cm height using with teak wood of 3x2cm size , including Melamine Polishing two coats etc. complete as drawing and directions of Deptl. officers at site.

od51201/2020_2021 : Supplying and fixing Wooden (Teak wood 2nd Class) with 10mm toughened glass for Handrails for stair. Height of hand rail comes to 1.20m, Top rail with Teak wood of 7x5cm, Horizontals 2Nos of size 5x3cm and Verticals 96 cm C/C with 6x4 cm size, inside frame 60 cm height with 10 mm thick Toughened glass pans fixed with Teak wood Reaper , including Melamine Polishing two coats etc. complete as drawing and directions of Deptl. officers at site.

od51202/2020_2021 : Supplying DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs.Including cost of all screws and conveyance of all materials ec.complete.

od51203/2020_2021 : Supplying DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. Template Drilled Including cost of all screws and conveyance of all materials ec.complete.

9.72.5 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:75x65x4 mm (heavy type)

9.80 : Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

9.114.1 : Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type

9.74.4 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:100x10 mm

9.78 : Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.

9.81.2 : Providing and fixing bright finished brass handles with screws etc. complete:100 mm

9.86.1 : Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete:300 mm weighing not less than 330 gms

od51205/2020_2021 : Supplying and fixing DORMA (3100-0) lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin chrome Including cost of all screws and conveyance of all materials ec.complete.

od51206/2020_2021 : Supplying and fixing DORMA (3100-1) lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin chrome Including cost of all screws and conveyance of all materials ec.complete.

od51207/2020_2021 : Supplying and fixing DORMA ITS 96, concealed cam action door closer with G 96 N slide channel arm with standard spindle, including cushioned limit stay. Spring size EN 2-4 as per EN 1154 and CE marked. Silver finish. Non-handed version Including cost of all screws and conveyance of all materials ec.complete.

od51208/2020_2021 : Supplying and fixing DORMA TS 90, cam action door closer with slide channel arm. Spring size EN 3/4 as per EN 1154 and CE marked. Silver finishIncluding cost of all screws and conveyance of all materials ec.complete.

od51209/2020_2021 : Supplying and fixing DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories Including cost of all screws and conveyance of all materials ec.complete.

od51210/2020_2021 : Supplying and fixing Electronic Hotel Lock, RF Mifare technology, 712 Design, Satin Chrome finish, ANSI Mortise, H7 Handle design, Inside Right/Left opening door, Door Thickness-40-41mm. Compatible to Electronic Hotel lock software -DHMSV.10 (Dorma EHL-DEHL RFM 712 SC ANSI H7 IR/IL) Including cost of all screws and conveyance of all materials ec.complete.

od51211/2020_2021 : Encoder for Programming RF Mifare cards with USB Port for computer interface (DORMA ENCODER - DENC RFM 7104D (With USB Port)

od51212/2020_2021 : Supply RF Mifare Fudan Chip Card, 13.56 MHZ, 1 K Byte DORMA

od51213/2020_2021 : Supplying and fixing Energy Saving Switch, with RF Mifare technology, DORMA Model - DESS RFM 843-C. It Can read any RF Mifare card Including cost of all screws and conveyance of all materials ec.complete.

od51215/2020_2021 : Supplying and fixing DORMA 1 point panic device in Contur design, push bar for single door for fire and smoke check doors, with steel latch, security anti thrust latch for door widths upto 1300mm, consisting of 2102F, 2105 in silver finish. As per EN 1125, CE marked Including cost of all screws and conveyance of all materials ec.complete.PHA-2000<br>

od51217/2020_2021 : Supplying and fixing DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length 42mm in satin nickel plated finish with 3 keys. Optional master keying and grand master keying can be done on request. -NMK Including cost of all screws and conveyance of all materials ec.complete.

od51218/2020_2021 : Supplying and fixing External trim for PHA, PHB Panic Hardware DORMA PHT-05 for fire and smoke check doors. For max. 60mm thick door prepared for euro profile cylinder. Silver finish.Including cost of all screws and conveyance of all materials ec.complete.

od51220/2020_2021 : Supplying and fixing Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap 13mm. Finish: Anadoised satin clear. L=1220mm Including cost of all screws and conveyance of all materials ec.complete.

od51222/2020_2021 : Supplying and fixing Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames, self adhesive, Finish = Black, Length = 1 x 1000mm, Height- 2 x 2750mm Including cost of all screws and conveyance of all materials ec.complete.RP 120- Long Single Doorset RAVEN make.

od51224/2020_2021 : Supplying and fixing Dorma Mortice sliding door 400 claw bolt with 55mm backset, 22mm sq forend including strike plate in satin stainless steel. EPC 60mm Length both side key operation & Escutcheons in SSS Finish Including cost of all screws and conveyance of all materials ec.complete.

od51225/2020_2021 : Supplying and fixing SLM 120 Sliding Door System for Timber Door, 3 Metre Length DORMA SLM 80 Accessories - 1 Set SLM Track, 3 mts length - 1 No Including cost of all screws and conveyance of all materials ec.complete.

od51226/2020_2021 : Supplying and fixing DORMA (1209) flush pull for sliding door, rectangular. Finish - Satin stainless steel Including cost of all screws and conveyance of all materials ec.complete.

od51227/2020_2021 : Supplying and fixing DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS Finish Including cost of all screws and conveyance of all materials ec.complete.

od51228/2020_2021 : Supplying and fixing Pure 8998 Type 3 Package with Pair of DORMA Pure 8998 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Back set 20mm Square for end. EPC 60mm length one side thumb turn other side coin release operation Including cost of all screws and conveyance of all materials ec.complete.

od51229/2020_2021 : Supplying and fixing DORMA (1206) spring loaded door security chain for the main doors in satin nickle plated. Including cost of all screws and conveyance of all materials ec.complete.

od51230/2020_2021 : Supplying and fixing DORMA door viewer 1200-1 with 180deg angle viewing adjustable and suitable for door thickness 35-55mm in satin nickle plated finish. Including cost and conveyance of all materials ec.complete.

od51231/2020_2021 : Supplying and fixing DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304 Including cost of all screws and conveyance of all materials ec.complete.

od51232/2020_2021 : Supplying and fixing DORMA GBDI D-600 Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel Finishetc.complete

od51233/2020_2021 : Supplying and fixing DORMA 4014 Wall mounted door stop with coat hook in SSS finish Including cost of all screws and conveyance of all materials ec.complete.

od51234/2020_2021 : Supplying and fixing DORMA dust excluding socket 3124 with 16mm dia hole, fully morticed on the floor. satin chrome etc.complete

od51235/2020_2021 : Supplying and fixing DORMA (3108) floor stop half dome with 45mm dia with fixing accessories, in satin Chrome Including cost of all screws and conveyance of all materials ec.complete.

od51236/2020_2021 : Supplying and fixing DORMA push plate 1100 with smoothened edges and rounded corners flush face fixing screws size 4" x 16" x 1.25mm in SS 304 grade in satin stainless steel Including cost of all screws and conveyance of all materials ec.complete.

od51237/2020_2021 : Supplying and fixing Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black etc.complete.

od51238/2020_2021 : Supplying and fixing Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black Including cost of all screws and conveyance of all materials ec.complete.

od51239/2020_2021 : Supplying and fixing Male sign plate DORMA 3020-M for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black Including cost of all screws and conveyance of all materials ec.complete.

App-B- Water Supply and Sanitary Installations

18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

50.18.7.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall

50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall

50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.8.7.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.20.3 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow

50.18.9.20.5 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

50.18.9.20.6 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee

50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

50.18.9.21 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow

50.18.9.21.3 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Door Elbow

50.18.9.21.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee

50.18.9.21.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee

50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

50.18.9.22.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

50.18.9.22.9 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia offset

18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.19.2.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreVertical

18.19.4.2 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical

18.76.1 : Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. ( non modular ) brick

18.77 : Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

od51101/2020_2021 : Providing & fixing of white colour ceramic Under Counter wash basin of size 595x400x195 mm (made of Jaquar model No. FNS-WHT- 40701) with overflow arrangements and supply & fixing of wall mounted basin mixer without popup waste system with 450mm long braided hoses (Jaquar KUP-35233PM), etc. complete as directed by KTDC. Bottle trap (Jaquar Model No. ALD-769 L300 x 190) 32mm size with 300 mm and 190mm long wall connection pipe and wall flange, Angle cock(KUB-35053F) ( 2Nos for hot & cold water), 450mm braided hose with nipple, nut, O-ring rubber washer suitable for basin mixer ( 2Nos for hot & cold water), including all accessories for fixing wash basin etc.complete (quality and brand as approved by the KTDC) . The rate includes cost and conveyance of all materials , all labour charges etc. complete (DAR-17.7.2 Based)

od51106/2020_2021 : Providing & fixing of white colour ceramic Under Counter wash basin of size 595x400x195 mm (made of Jaquar model No. FNS-WHT- 40701) with overflow arrangements including fixing of 1 no pillar cock (KUP-35001PM Pillar Cock), Bottle trap (Jaquar Model No. ALD-769 L300 x 190) 32mm size with 300 mm and 190mm long wall connection pipe and wall flange, Angle cock 1No (KUB-35053F) Jaquar made ALD-805B/801B/803B/806B 450mm braided hose with nipple, nut, O-ring rubber washer suitable for basin 1no, including all accessories for fixing wash basin etc. complete (quality and brand as approved by the KTDC) . The rate includes cost and conveyance of all materials, all labour charges etc. complete

od51110/2020_2021 : Providing and fixing 18 mm thick Jet Black Granite gang saw cut, mirror, polished, premoulded and prepolished, machine cut for vanity counters and similar locations, of required size, approved shade, colour and texture including edge rounding polishing, fixing the slab with silicone sealant etc. complete as per the directions of Engineer at site.

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

od51125/2020_2021 : Supplying and fixing Rimless wall hung water closet (Jaquar VGS WHT 81953) with UF soft close seat cover, hinges, accessories set, Singe piece slim concealed cistern with floor mounting frame, installation kit and "S type" drain pipe connection set (Jaquar JCS WHT 2400FS), Control Plate (Jaquar JCP CHR 852415) or equivalent of approved make including cost, fixing charges etc complete.

od51130/2020_2021 : Supplying and fixing angular stop cock with wall flange (Jaquar FUS 29053) or equivalent of approved make including cost, fixing charges etc complete.

od51133/2020_2021 : Supplying and fixing Single lever basin mixer with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses (Jaquar FUS 29005NB) or equivalent of approved make including cost, fixing charges etc complete.

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

od51140/2020_2021 : Providing and fixing Jaquar CQT- 23083K Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange Compatible with ALD-089 Concealed Stope Cock etc.complete.

od51144/2020_2021 : Providing and fixing Jaquar OHS-1999 Overhead Shower ø100mm Round Shape Multi Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System and SHA-483 Shower Arm Casted 190mm Long Flat Shape for Wall Mounted Showers with Flange etc.complete.<br>

od51145/2020_2021 : Supplying and fixing Single towel rail 450mm long(Jaquar ACN 1111BNM or approved equivalent). The rate includes all material cost, labour charge, conveyance etc complete.

od51149/2020_2021 : Supplying and fixing white vitreous china battery based infrared sensor urinal (Jaquar URS-WHT-13255 and CHR 51097) having pre and post flusing with water, having water inlet from back including fixing to wall with suitable brackets all as per direction of engineer in charge including painting of fittings and cutting and making good the walls and floors wherever required. The rate includes all material, labour, conveyance charges etc complete

od51154/2020_2021 : Supplying and Fixing Division Plate(CERA) 90 x 320 x 720 mm or equivalent of approved quality with approved make including cost, fixing charges etc complete(Model No : CERA 5011 Division Plate)(Snow White)

od51156/2020_2021 : Supplying and fixing liquid soap dispenser with glass bottle (Jaquar 35735P or approved equivalent). The rate includes all material cost, labour charge, conveyance etc complete.

od51158/2020_2021 : Supplying and fixing 5" gratings heavy duty of approved make including cost, fixing charge etc complete

od51161/2020_2021 : Supply and installation of sliding door type Jaquar shower enclosure with 8 mm thick toughened glass using glass to wall and floor brackets , Pentagonal Support bar, magnetic seal , water dispenser, wall seal, wall clamp, sealant, sliding arrangements, handles etc complete as per the attached drawings. Patch fittings,Hinges, brackets: Ozone OSH or Dorma S 2000 or equivalent etc. The rate includes cost and conveyance of all materials , all labour charges etc. complete. as per the directions of departmental Engineers at site and Architectural drawings.

od51163/2020_2021 : Providing and fixing shower panel (Jaquar model no. JPL-SSF-ST8858B3) with all accessories such as Chrome plated ABS hand shower Brass Spout, Multi function water diverter, Brass faucet body with Hot & Cold mixer, 40cm stainless steel braided hose, 1.5m stainless steel double locked flexible hoses etc. including finishing the wall with cement mortar including all accessories for fixing shower unit and making good walls etc. complete The rate includes cost and conveyance of all materials , all labour charges etc. complete

od51164/2020_2021 : Providing and fixing Jaquar ORP-10037PM Bib Cock with Wall Flange 15 mm nominal bore etc. complete

od51166/2020_2021 : Supplying and fixing in position Robe hook - double coat hook (model No. AKP-35761P of Jaquar), including cutting & making good the walls ,cost and conveyance of all materials and labour charges for fixing etc. complete.(DAR-18.65 Based)

od51169/2020_2021 : Supplying and fixing in position C.P. Cloth Liner Retractable (model No. AHS- 1565 of Jaquar), including cutting & making good the walls ,cost and conveyance of all materials and labour charges for fixing etc. complete. (DAR-17.73.1 Based)

od51173/2020_2021 : Supplying and fixing in position C.P. soap dish holder (Jaquar model No. AKP-35731P), including cutting & making good the walls ,cost and conveyance of all materials and labour charges for fixing etc. complete.(DAR-18.65 Based)

od51175/2020_2021 : Supplying and fixing C.P Toilet paper Roll Holder With flap( Jaquar model No. AKP-35753P), including cutting & making good the walls, cost and conveyance of all materials (including wooden plugs, steel screws etc.) and labour charges for fixing etc. complete. (DAR-17.34.1 Based)

od51178/2020_2021 : Providing & fixing of 600mm long CP superior quality towel rack with lower hanger (made of Jaquar No.AKP-35781P ) and flange with concealed screws etc., including cutting & making good the walls and floors, the rate includes cost and conveyance of all materials all labour charges etc. complete Make:Jaquar Artize (DAR-17.73.1 Based)

od51180/2020_2021 : Providing & fixing of 600mm long CP superior quality Single towel rail (made of Jaquar model No.AKP-35711P ) and flange with concealed screws etc., including cutting & making good the walls and floors, the rate includes cost and conveyance of all materials all labour charges etc. complete (DAR-17.73.1 Based)

od51184/2020_2021 : Providing, fixing, Floor trap & SS Gratings with Anti-Cockroach Trap including all cost conveyance etc (DAR-17.60.1.1)

od51186/2020_2021 : Supplying and fixing in position Back Coppered mirror (modi float/saint globain) 6mm thick of appropriate sizes as per requirement and fixing with 6mm thick multiwood of the required size of the mirror fixed over a 12mm thick marine plywood, fixing the multiwood with marine plywood in wall hang over two numbers of teakwood reapers placed horizontaly as shown in the drawing including fixing the edges with marine plywood reapers alround and pasting the mirror with silicon sealent and lipping all edges pasting with sealant, including grounding the edges to remove the sharpness etc. complete.( As per drawing No. 7) the rate including all material cost, labour charges, conveyance, etc complete

19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

19.7.3.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x 90 cm and 90 cm deep including C.I. cover with frame ( heavy duty ) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg ( weight of cover 108 kg and weight of frame 100 kg)With common burnt clay F.P.S. ( non modular) bricks of class designation 7.5

19.8.2.1 : Extra for depth for manholesSize 120x90 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

19.20 : Supplying and fixing C.I cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

19.32.1 : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

19.4.1.1 : Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

od51193/2020_2021 : Supply and Installation of Water Transfer Pumps System for Pumping Water as per the following Specifications.( Domestic Water) 5HP, 3Phase Centrifugal Coupled Pump with Cast Iron Body and impeller and all accessories Suitable for a Head of 60 mtrs. Pump motor shall be of IE2 efficiency and Pump shall have minimum 3 star BEE rating or equivalent efficiency including Installation of Motor Starter with Illuminated LED type On/ Off/ Reset Push Buttons, 3Phase DOL Motor Starter with 20A 3phase Contactor and Thermal Overload Relay, Control wiring Wall Mount in an outdoor type Enclosure etc.complete (Kirloskar/CRI/ESPA).

18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

18.32.1 : Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

App-C- Construction of STP and UG tank

6.2.2 : Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

od50974/2020_2021 : Supplying and fixing Cast Iron Manhole cover with frame and locking arrangements of size 600x600mm (Medium -Weight Not less than 65kg/each) including all conveyance, all labour charges etc. complete.

od50980/2020_2021 : Supplying and fixing Anaerobic Media 0.4mm & 0.5mm thick sheet having size 1200mm x 600mm PVC Make - Cool Deck /MM Aqua etc.complete<br>

od50986/2020_2021 : Supplying and fixing Blowers with Motors 70 Cu.m./hr@ 4500MMWG, Twin lobe roots blower Make - Everest/ A1 Blowers/ Kay including all conveyance etc. complete.

od50991/2020_2021 : Supplying and fixing Aeration Grid CPVC 1” dia piping network provided with holes etc. complete including all conveyance

od50995/2020_2021 : Supplying and fixing Pressure Sand Filter FRP With Media 0.45m Dia x 1.6m ht Make : Pentair/Canature including all conveyance etc. complete.

od50999/2020_2021 : Supplying and fixing Activated Carbon Filter With Media FRP 0.45m Dia x 1.6m ht Make : entair/Canature etc. complete. including all conveyance.

od51008/2020_2021 : Supplying and fixing PSF Feed Pumps cast iron 3Cum/hr @ 40 MLC Head Make : Kirlosakar/Lubi etc. complete including all conveyance

od51011/2020_2021 : Supplying and fixing Screen (SS) including all conveyance etc. complete.

od51019/2020_2021 : Supplying and fixing Hypo Dosing System Capacity : 6LPH with dosing Tank Make : Milton Roy including all conveyance.

od51023/2020_2021 : Ultra filtration System Capacity : 3000LPH Feed Pump 3000LPH (2Nos.), Back wash Pumps 10000LPH (1No.), UF membrane, Flow meters, bag filter, cleaning system with back wash tank, dosing Pump with tank, semi-automation Control Panel, necessary UPVC & SS piping etc including all conveyance .

od51028/2020_2021 : Supplying and fitting Waste Water Transfer Pumps 3Cub.m/hr @10MLC Head, Self priming centrifugal pump Make : Kirlosakar/Lubi etc. complete.<br>

19.32.1 : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes

50.18.7.5.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall

50.18.9.5.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2

App-D-Construction of Retaining wall

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

od50902/2020_2021 : Dry rubble masonry with hard stone super structure including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) including cost of through stone and bond stone .

7.2.1 : Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od50966/2020_2021 : 15 mm cement plaster on Random Rubble masonry:<br>1:6 ( 1 cement : 6 coarse sand)

od50975/2020_2021 : Providing Pre cast RCC 1:2:4 guard Stone of size 25x25x120cm including providing 8mm dia TS 4nos verticals and 9Nos stirrup for reinforcement, all cost of centering shuttering and necessary holes for entering hand rails horizontal and fixing the post on RR or RCC retaining wall etc. complete.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

2.2.1 : Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m:All kinds of soil

App - E - Electrification - Wiring portion

90.1.1.1 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.

90.1.1.2 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.

od50911/2020_2021 : Supply and fixing the following normal size PVC accessories conforming to IS 3419/1988 along with the PVC conduits laid in concrete<br>20 mm Four way terminal junction box

od50919/2020_2021 : Supply and fixing the following normal size PVC accessories conforming to IS 3419/1988 along with the PVC conduits laid in concrete<br>20 mm Three way terminal junction box

od50927/2020_2021 : Supply and fixing the following normal size PVC accessories conforming to IS 3419/1988 along with the PVC conduits laid in concrete<br>20 mm Two way terminal junction box <br>

od50935/2020_2021 : Supply and fixing the following normal size PVC accessories conforming to IS 3419/1988 along with the PVC conduits laid in concrete<br>20 mm one way terminal junction box <br>

od50944/2020_2021 : Supply and drawing the following sizes of GI guide wire in the existing conduit<br>18 SWG

90.2.1.3 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

90.2.1.2 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

90.2.1.5 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

90.2.1.9 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

90.2.1.10 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).

90.2.1.6 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

90.2.1.7 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent plug - Short point

90.2.1.14 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent Plug - Medium Point

od51039/2020_2021 : Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>4 light points controlled by 1 number one way switch(Medium point)

od51043/2020_2021 : Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br>2 light points controlled by 1 number one way switch(Medium point)

od51127/2020_2021 : Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 5 W LED to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.<br>Supply

1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.

od51131/2020_2021 : Supply and fixing of 5W LED bulb in the existing batten holder and Bulkhead fittings

od51139/2020_2021 : Supply and fixing sintex outdoor junction box with necessary clamp ,nuts and bolts as required <br>104mmx104mmx70mm

od51143/2020_2021 : Supply and fixing sintex outdoor junction box with necessary clamp ,nuts and bolts as required <br>93mmx93mmx62mm

od51148/2020_2021 : Supply and fixing sintex outdoor junction box with necessary clamp ,nuts and bolts as required <br>130mmx130mmx77mm

90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

1.48 : Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

90.4.9 : Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required.

od51176/2020_2021 : Supply,installation,testing and commissioning of 130mm light duty Exhaust fan working on 230V single phase AC supply of good quality and approved make to the existing opening /False ceiling making good damageswith 3cx1.5sqmm FR PVC insulated copper conductor flexible cable etc as required

od51177/2020_2021 : Supply,installation,testing and commissioning of 380mm light duty Exhaust fan working on 230V single phase AC supply of good quality and approved make to the existing opening /False ceiling making good damageswith 3cx1.5sqmm FR PVC insulated copper conductor flexible cable etc as required

1.51 : Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

90.5.1.3 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.

od51187/2020_2021 : Supply ,and fixing of modular type electronics chime in the existing switch board (Bell ding dong) working on 230 V AC supply

90.6.10.1 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

90.6.10.2 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

90.6.10.3 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

90.6.4.3 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.7.1 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.7.2 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire

1.17.20 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.22 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.24 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm

90.6.4.54 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.3 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module

1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.5 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

90.10.3.17 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.14 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

od51216/2020_2021 : Supply and fixing of DND and MMR indicator internal and external module with bell push in existing metal box,plate and giving connections as required

od51219/2020_2021 : Supply and fixing of 25A-2NO modular contactors for single phase operation in existing distribution board and giving connections as required

od51221/2020_2021 : Supply,conveyance,testing and commissioning of 16/20/25A 230V AC 2 module card operated hotel key card switch etc complete including giving connection as required

2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

2.20 : Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth,metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

90.11.1.20 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

od51240/2020_2021 : Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required <br>50A and 63A TPMCB

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

od51241/2020_2021 : Providing and fixing following rating and braking capacity and pole MCCB in existing MCCB Vertical DB including drilling holes and necessary connections as required <br>63A 4 pole 16 KA MCCB

2.2.1 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA, TPMCCB

od51242/2020_2021 : Supply of superior quality copper reducer (banana) cable socket and making core termination of cables of the following sizes including crimping etc. as required.<br>2.5sqmm,4sqmm &6sqmm

90.16.1.1 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

90.16.5.1 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

od51243/2020_2021 : Supply and fixing 32A415V 2way neutral link in the existing sintex junction box

App- F - HT PORTION

od50895/2020_2021 : RMU Unit-Supply, Erection, testing and Commissioning of 11KV,630A,30KA, Electrical & Manual operated, compact, Outdoor, Extensible CCV(2Nos, Load Break Switch(OD) incomer and 1No. Fixed type manual & Electrical operated VCB with retrofitable facility of Automation.The scope includes testing at manufacturer premises transportation,unloading,testing at site as per authorities requirements and installation at side including providing all necessarry civil foundation works fencing providing jelly inside fenced area etc complete as per KSEB & Electrical Inspectorate requirements<br>

od50903/2020_2021 : Supply,Installation ,Testing & commissioning of 11kV Outdoor Load Break Switch Metering panel with HRC Fuses, CT-PT unit 0.5s class 3CT type and TOD meter.(including CT-PT unit & TOD meter testing from authorities).The scope includes testing at maufacturer premises,transportation,unloading and erection at site with required civil foundation work etc complete.<br>

od50912/2020_2021 : "<br>Supply Installation ,Testing & commissioning of USS consisting of 11kV Indoor Load Break Switch with HRC fuse and 11KV /433 v, 400kVA CastResin Transformer with OLTC .The scope includes testing at maufacturer premises,transportation,unloading a at site"<br>

od50926/2020_2021 : Supply,Installation ,Testing & commissioning of Neutral CT 150,5A,Cl-5p10 in suitable metal enclosure with proper treatment and painting(including CT testing from authorities)<br>

od50936/2020_2021 : Supply,conveyance of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade <br> 150 sq. mm

od50945/2020_2021 : Supply,conveyance of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade <br> 300 sq. mm

8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

9.1.15 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 150 sq. mm (50mm)

9.1.19 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 300 sq. mm (70mm)

10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

od51012/2020_2021 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required :<br>150 sq. mm

5.1 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

90.16.3.2 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)

90.12.9.7 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench

90.12.9.8 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench

APP- G - LT Panels ,Cables & Earthing

90.14.1.1 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

90.14.2.3 : Supply and providing 4mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

90.14.10.18 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.10.21 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.10.14 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.10.13 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.10.12 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.10.11 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

90.14.11.3 : MCCB Accessories

90.14.11.4 : MCCB Accessories

90.14.11.9 : MCCB Accessories

90.14.11.10 : MCCB Accessories

90.14.11.11 : MCCB Accessories

90.14.11.12 : MCCB Accessories

90.14.11.13 : MCCB Accessories

90.14.11.16 : MCCB Accessories

od50961/2020_2021 : Enameled Danger Notice board of size 100x75mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

od50977/2020_2021 : Supply,installation and testing of LED indicator for all voltage range with Green/red/Yellow colour s

od50982/2020_2021 : Supply,installation and testing of LED indicator for all voltage range with Blue colour

od51050/2020_2021 : Supply and providing 600/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od51054/2020_2021 : Supply and providing 400/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od51057/2020_2021 : Supply and providing 250/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od51060/2020_2021 : Supply and providing 160/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od51063/2020_2021 : Supply and providing 125/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od51067/2020_2021 : Supply and providing 200/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od50996/2020_2021 : supply,installation and testing of 3 phase multi function to read w,Wh,Pf or va,varh accuracy class 0.5

od51085/2020_2021 : Enameled Danger Notice board of size 200x150mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

od51090/2020_2021 : Surge Protection Device: Class B &amp; Class C/ Class 1 &amp; Class 2 Tested as per IEC 61643 Part 11:2011 . Nominal voltage -230V 50/60Hz, MCOV of 275 V , Total Impulse current-100 KA (10/350&micro; sec) &amp; Total Max Discharge current 400KA (8/20&micro; sec), Voltage protection level &lt;1.3 kV &amp; Residual Voltage @ 5 kA(8/20) &lt;0.8 kV . The Surge Protection Devices should have TOV withstand for 120 Min : 438 V and with out Follow Current &amp; Leakage Current. . Short- Circuit Current rating (Isccr) &ndash; 25 kA/50 Hz . Back up fuse required for more than 250AgG/gL. Health Status Indication required in all catridge. Total Response time &lt;25 nano sec

od51103/2020_2021 : Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required&lt;br&gt;2.5cm/4cm or 5cm height

90.12.7.2 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.3 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.27 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.31 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.35 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.36 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.39 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.6.33 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.

90.12.6.34 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.

90.12.6.35 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.

90.12.6.36 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.

90.12.6.37 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.

90.12.41.4 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

od51170/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.&lt;br&gt; &lt;br&gt; 6 core 1.5 sq mm with factory made clamp

od51172/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.&lt;br&gt; &lt;br&gt; 12 core 1.5 sq mm with factory made clamp

od51174/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.&lt;br&gt; &lt;br&gt; 2 core 2.5 sq mm with factory made clamp

od51179/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.&lt;br&gt;3 core 1.5 sq mm with factory made clamp

od51181/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.&lt;br&gt;3 core 2.5 sq mm with factory made clamp

9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.2 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

9.1.3 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

9.1.20 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

4.1.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

4.1.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.1.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness

4.1.7 : Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.2.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

4.2.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.2.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X 50 mm depth X 2.0 mm thickness

4.2.7 : Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.3.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.200 mm width X 50 mm depth X 1.6 mm thickness

4.3.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.3.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X 50 mm depth X 2.0 mm thickness

4.3.7 : Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.4.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays Tee's with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

4.4.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays Tee's with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.4.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays Tee's with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X 50 mm depth X 2.0 mm thickness

4.4.7 : Supplying and installing following size of perforated pre-painted M.S. cable trays Tee's with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

4.5.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness

4.5.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

4.5.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X 50 mm depth X 2.0 mm thickness

4.5.7 : Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od50942/2020_2021 : Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.&lt;br&gt;2 x 25 x 3 mm tinned copper strip

od50952/2020_2021 : Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.&lt;br&gt;25 x 3 mm copper strip tinned at the points of contact

od51204/2020_2021 : Supply and laying the following sizes of strips laid 0.60 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil).&lt;br&gt;25 x 3 mm copper strip tinned at the points of contacts

90.16.3.8 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm copper strip

90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)

90.16.4.7 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm copper strip

90.16.4.8 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).

90.16.1.1 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.2.4 : Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

90.16.5.1 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

90.16.5.2 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

od51214/2020_2021 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required&lt;br&gt;25 x 3 mm brass bolt &amp; nut

od50962/2020_2021 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required&lt;br&gt;25 x 6 mm brass bolt &amp; nut

APP- H- APFC panel and Capacitors

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

od50937/2020_2021 : 250A 50 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL &lt;br&gt;

90.14.11.13 : MCCB Accessories

od50961/2020_2021 : Enameled Danger Notice board of size 100x75mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

od50977/2020_2021 : Supply,installation and testing of LED indicator for all voltage range with Green/red/Yellow colour s

od50982/2020_2021 : Supply,installation and testing of LED indicator for all voltage range with Blue colour

od50988/2020_2021 : Supply and fixing 250/ 5 A, 5 VA, resin cast metering CT of accuracy class 0.5&lt;br&gt;

od50996/2020_2021 : supply,installation and testing of 3 phase multi function to read w,Wh,Pf or va,varh accuracy class 0.5

90.14.24.31 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.32 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.33 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.35 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.38 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.41 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.55 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.56 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.57 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.59 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.62 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.24.65 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

od51089/2020_2021 : Providing and fixing12 stage, 440/ 110 V, 5 A/ 1 A intelligent power factor controller.&lt;br&gt;

od51093/2020_2021 : Illuminated flush head actuator - Green with legend &quot;OFF&quot; with 1 NO contact.

od51097/2020_2021 : Illuminated flush head actuator - Green with legend &quot;ON&quot; with 1 NO contact.

od51105/2020_2021 : Supply and providing panel mounting fresh air fan 150mm as required

od51109/2020_2021 : Three pole capacitor duty contactors for switching capacitor banks of 26 to50 KVAr rating with AC coil and 1 NO contact.

od51112/2020_2021 : Three pole capacitor duty contactors for switching capacitor banks of 16 to 25 KVAr rating with AC coil and 1 NO contact.

od51116/2020_2021 : Three pole capacitor duty contactors for switching capacitor banks of 11 to 15 KVAr rating with AC coil and 1 NO contact.

od51123/2020_2021 : Three pole capacitor duty contactors for switching capacitor banks of 7.5 to 10 KVAr rating with AC coil and 1 NO contact.&lt;br&gt;

od51124/2020_2021 : Supply and wiring with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size sockets at the termination points, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.&lt;br&gt;10.00 sq mm single run without sockets.

od51128/2020_2021 : Supply and wiring with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size sockets at the termination points, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.&lt;br&gt;6.00 sq mm single run without sockets.

od51129/2020_2021 : Supply and wiring with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size sockets at the termination points, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.&lt;br&gt;4.00 sq mm single run without sockets.

od51134/2020_2021 : Supply and fixing the following accessories in the existing Capacitor panel and giving connections etc.&lt;br&gt;32 A, 415 V Backelite fuse fitting with 25A HRC

od51135/2020_2021 : Supply and fixing the following accessories in the existing Capacitor panel and giving connections etc.&lt;br&gt;63 A, 415 V Backelite fuse fitting with 50A HRC

od51137/2020_2021 : Supply and fixing the following accessories in the existing meter board and giving connections etc.&lt;br&gt;100 A, 415 V Backelite fuse fitting with 80A HRC

od51141/2020_2021 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.&lt;br&gt;10 sq mm

od51142/2020_2021 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.&lt;br&gt;6 sq mm

od51147/2020_2021 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.&lt;br&gt;4 sq mm

od51151/2020_2021 : Supply of superior quality copper reducer (banana) cable socket and making core termination of cables of the following sizes including crimping etc. as required.&lt;br&gt;10sqmm

od51152/2020_2021 : Supply of superior quality copper reducer (banana) cable socket and making core termination of cables of the following sizes including crimping etc. as required.&lt;br&gt;4sqmm,6sqmm

od51103/2020_2021 : Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required&lt;br&gt;2.5cm/4cm or 5cm height

APP- I - Air Conditioning unit

od50888/2020_2021 : Supply, installation, testing, and commissioning of 11.0 TR nominal capacity ductable split air conditioners with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, microprocessor control with digital display, eco friendly refrigerant gas, vibration isolation pads etc.&lt;br&gt;

od50896/2020_2021 : Supply, installation, testing, and commissioning of 11.0 TR nominal capacity scroll condensing air conditioners with all standard fittings, safety devices, llike HP/LP cutout, single phase preventor, overload relays, microprocessor control with digital display, eco friendly refrigerant gas, vibration isolation pads etc.&lt;br&gt;

od50904/2020_2021 : Supply, installation, testing, and commissioning of 5.5 TR nominal capacity scroll condensing air conditioners with all standard fittings, safety devices, llike HP/LP cutout, single phase preventor, overload relays, microprocessor control with digital display, eco friendly refrigerant gas, vibration isolation pads etc.&lt;br&gt;

od50913/2020_2021 : Supply, installation, testing, and commissioning of 8.5 TR nominal capacity scroll condensing air conditioners with all standard fittings, safety devices, llike HP/LP cutout, single phase preventor, overload relays, microprocessor control with digital display, eco friendly refrigerant gas, vibration isolation pads etc.&lt;br&gt;

od50920/2020_2021 : Supply, installation, testing, and commissioning of 8.5 TR nominal capacity ductable split air conditioners with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, microprocessor control with digital display, eco friendly refrigerant gas, vibration isolation pads etc.&lt;br&gt;

od50928/2020_2021 : Supply ,fixing and drawing refrigerant piping and electrical cabling for 11 TR Scroll condensing AC unit and normal capacity ductable split AC unit

od50938/2020_2021 : Supply ,fixing and drawing refrigerant piping and electrical cabling for 8.5 TR Scroll conensing AC unit and normal capacity ductable split AC unit

od50946/2020_2021 : Supply ,fixing and drawing refrigerant piping and electrical cabling for 5.5 TR Scroll conensing AC unit

od50950/2020_2021 : Supply, installation, testing &amp; commissioning of double skin AHU with 40 mm sandwitched PUF insulation,double skin type powder coated sheet, the inner sheets of the panels shall be made of 0.63 mm thick GSS, whereas the outer sheet shall be of 0.8 mm thick GSS with pre plasticised finish, extruded aluminium frame work, fan section with motor, DX coil, drive package, filter, emergency light, fan section, coil section, filter section Insulated SS drain pan etc. Cooling coil of copper tube &amp; aluminium fins min. 450 fins/mtr., anti vibration spring/ isolators, 10mm thick synthetic media fitter with frame 90% efficiency down up to 10 micron. Insulation of all section with fire retardant insulation material. Canvas connection of fire retardant type&lt;br&gt;8500 CFM, 6R, 50mm TSP Floor Mounted (Connected to 3 Nos 11.0 TR Condensing Units)

od50955/2020_2021 : Supply, installation, testing &amp; commissioning of double skin AHU with 40 mm sandwitched PUF insulation,double skin type powder coated sheet, the inner sheets of the panels shall be made of 0.63 mm thick GSS, whereas the outer sheet shall be of 0.8 mm thick GSS with pre plasticised finish, extruded aluminium frame work, fan section with motor, DX coil, drive package, filter, emergency light, fan section, coil section, filter section Insulated SS drain pan etc. Cooling coil of copper tube &amp; aluminium fins min. 450 fins/mtr., anti vibration spring/ isolators, 10mm thick synthetic media fitter with frame 90% efficiency down up to 10 micron. Insulation of all section with fire retardant insulation material. Canvas connection of fire retardant type&lt;br&gt;4500 CFM, 6R, 40mm TSP Floor Mounted (Connected to 2 Nos 8.5 TR Condensing Units)

od50959/2020_2021 : Supply, installation, testing &amp; commissioning of double skin AHU with 40 mm sandwitched PUF insulation,double skin type powder coated sheet, the inner sheets of the panels shall be made of 0.63 mm thick GSS, whereas the outer sheet shall be of 0.8 mm thick GSS with pre plasticised finish, extruded aluminium frame work, fan section with motor, DX coil, drive package, filter, emergency light, fan section, coil section, filter section Insulated SS drain pan etc. Cooling coil of copper tube &amp; aluminium fins min. 450 fins/mtr., anti vibration spring/ isolators, 10mm thick synthetic media fitter with frame 90% efficiency down up to 10 micron. Insulation of all section with fire retardant insulation material. Canvas connection of fire retardant type&lt;br&gt;4000 CFM, 6R, 40mm TSP Ceiling Suspended (Connected to 1 No 8.5 TR + 1 No 5.5 TR Condensing Units)

od50968/2020_2021 : Supply, installation, testing, and commissioning of VRV/VRF multi split Air Conditioning system of the following capacities comprising of &lt;br&gt;Scroll compressors,Scroll compressors,System Controller ,Eco friendly 410A eco friendly refrigerant gas,Vibration isolation pads, etc&lt;br&gt;36 HP&lt;br&gt;

od50978/2020_2021 : Supply, installation, testing, and commissioning of VRV/VRF multi split Air Conditioning system of the following capacities comprising of &lt;br&gt;Scroll compressors,Scroll compressors,System Controller ,Eco friendly 410A eco friendly refrigerant gas,Vibration isolation pads, etc&lt;br&gt;30 HP&lt;br&gt;

od50989/2020_2021 : Supply, installation, testing, and commissioning of VRV/VRF multi split Air Conditioning system of the following capacities comprising of &lt;br&gt;Scroll compressors,Scroll compressors,System Controller ,Eco friendly 410A eco friendly refrigerant gas,Vibration isolation pads, etc&lt;br&gt;AHU Kit - 12.0 TR&lt;br&gt;

od50992/2020_2021 : Supply, installing testing and commissioning of Ductable indoor unit of following capacities of Variable Refrigerant Volume air conditioners complete with filters of 10 micron filtering capacity, coil section with refrigerant cooling coil and fan section, insulated drain pan of adequate size.&lt;br&gt;2.0 TR capacity, ceiling suspended, High Static

od50994/2020_2021 : Supply, installing testing and commissioning of Ductable indoor unit of following capacities of Variable Refrigerant Volume air conditioners complete with filters of 10 micron filtering capacity, coil section with refrigerant cooling coil and fan section, insulated drain pan of adequate size.&lt;br&gt;1.6 TR capacity, ceiling suspended, High Static

od51002/2020_2021 : Supply, installing testing and commissioning of Ductable indoor unit of following capacities of Variable Refrigerant Volume air conditioners complete with filters of 10 micron filtering capacity, coil section with refrigerant cooling coil and fan section, insulated drain pan of adequate size.&lt;br&gt;1.3 TR capacity, ceiling suspended, High Static

od51010/2020_2021 : Supply, installing testing and commissioning of Ductable indoor unit of following capacities of Variable Refrigerant Volume air conditioners complete with filters of 10 micron filtering capacity, coil section with refrigerant cooling coil and fan section, insulated drain pan of adequate size.&lt;br&gt;4.0 TR, 600 CFM Treated Fresh Air Unit

od51014/2020_2021 : Supply, installation, testing &amp; commissioning of double skin AHU with 50 mm sandwitched PUF insulation,thermal break, double skin type powder coated sheet, the inner sheets of the panels shall be made of 0.63 mm thick GSS, whereas the outer sheet shall be of 0.8 mm thick GSS with pre plasticised finish, extruded aluminium frame work, fan section with motor, DX coil, drive package, filter, emergency light, fan section, coil section, filter section Insulated SS drain pan etc. Cooling coil of copper tube &amp; aluminium fins min. 450 fins/mtr., anti vibration spring/ isolators, 10mm thick synthetic media fitter with frame 90% efficiency down up to 10 micron. Insulation of all section with fire retardant insulation material. Canvas connection of fire retardant type&lt;br&gt;1800 CFM, 6R, 12.0 TR capacity 30mm ESP Ceiling Suspended

od51018/2020_2021 : Supply and Installing of Copper Piping with 25 mm nitrile insulation with Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;34.8 mm dia

od51020/2020_2021 : Supply and Installing of Copper Piping with 25 mm nitrile insulation with Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;28.6 mm dia

od51024/2020_2021 : Supply and Installing of Copper Piping with 25 mm nitrile insulation with Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;22.22 mm dia

od51030/2020_2021 : Supply and Installing of Copper Piping with 25 mm nitrile insulation with Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;19.03 mm dia

od51034/2020_2021 : Supply and Installing of Copper Piping with 25 mm nitrile insulation with Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;15.88 mm dia

od51035/2020_2021 : Supply and Installing of Copper Piping with 13 mm nitrile insulation Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;19.03mm

od51040/2020_2021 : Supply and Installing of Copper Piping with 13 mm nitrile insulation Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;15.88mm

od51042/2020_2021 : Supply and Installing of Copper Piping with 13 mm nitrile insulation Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;12.7mm

od51045/2020_2021 : Supply and Installing of Copper Piping with 13 mm nitrile insulation Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;9.52mm

od51047/2020_2021 : Supply and Installing of Copper Piping with 13 mm nitrile insulation Mechanical Protection for Piping with UV Resistant Paint and Glass Cloth.&lt;br&gt;6.35mm

od51051/2020_2021 : Supply fabrication, installation and testing of GSS metal duct in accordance with approved shop drawings and as required by specifications &lt;br&gt;22 swg

od51053/2020_2021 : Supply fabrication, installation and testing of GSS metal duct in accordance with approved shop drawings and as required by specifications &lt;br&gt;24 swg

od51058/2020_2021 : Supply, Installation, testing and balancing of grilles of Aluminium construction with powder coated finish&lt;br&gt;Return air diffusers without damper

od51061/2020_2021 : Supply, Installation, testing and balancing of grilles of Aluminium construction with powder coated finish&lt;br&gt;Supply air diffusers with aluminium damper

od51062/2020_2021 : Supply, Installation, testing and balancing of grilles of Aluminium construction with powder coated finish&lt;br&gt;Air grilles without damper

od51066/2020_2021 : Supply, Installation and balancing of grilles of Aluminium construction with powder coated finish&lt;br&gt;Air grilles with aluminium damper

od51071/2020_2021 : Supply, installation &amp; testing of fresh air opening duct with bird and cowl screen with damper arrangement out of aluminium construction.&lt;br&gt;

od51077/2020_2021 : Supply, installation &amp; testing of Thermal Insulation of ducting using Closed Cell Elastomeric nitrile rubber having a density of 40-60 Kg/m3 and with Microban Certified anti-microbial protection&lt;br&gt;18 mm thick

od51079/2020_2021 : Supply, installation &amp; testing of Thermal Insulation of ducting using Closed Cell Elastomeric nitrile rubber having a density of 40-60 Kg/m3 and with Microban Certified anti-microbial protection&lt;br&gt;8 mm thick

od51083/2020_2021 : Supply, installation &amp; testing of Acoustic Insulation of ducts using opencell processed nitrile rubber having a density of 140-180 Kg/m3 and thickness of 10 mm with Microban Certified anti-microbial protection&lt;br&gt;

od51084/2020_2021 : Supply, installing testing and commissioning of copper distribution Joints with insulation&lt;br&gt;

od51088/2020_2021 : Supply, installing testing and commissioning of weather proof cabinit type Exhaust fan assembly for outdoor aplication of following capacity for toilet exhaust. &lt;br&gt;1000 cfm / 30 mm static

od51092/2020_2021 : Supply, installing testing and commissioning of weather proof cabinit type Exhaust fan assembly for outdoor aplication of following capacity for toilet exhaust. &lt;br&gt;1850 cfm / 30 mm static

od51096/2020_2021 : Supply and fixing in position of insulated PVC condensate drain water piping with necessary fittings like elbows, tees and reducers insulated with 6mm vidoflex / eqv.&lt;br&gt;50 mm dia

od51100/2020_2021 : Supply and fixing in position of insulated PVC condensate drain water piping with necessary fittings like elbows, tees and reducers insulated with 6mm vidoflex / eqv.&lt;br&gt;40 mm dia

od51108/2020_2021 : Supply and fixing in position of insulated PVC condensate drain water piping with necessary fittings like elbows, tees and reducers insulated with 6mm vidoflex / eqv.&lt;br&gt;32 mm dia

od51113/2020_2021 : Supply and fixing in position of insulated PVC condensate drain water piping with necessary fittings like elbows, tees and reducers insulated with 6mm vidoflex / eqv.&lt;br&gt;25 mm dia

od51115/2020_2021 : Supply and Installing of Communication cabling between indoor and outdoor unit.&lt;br&gt;

od51118/2020_2021 : Supply and fixing stand for fixing out door AC unit

od51121/2020_2021 : Supply, installing testing and commissioning of Exhaust Fan, Make up air fan, Exhaust &amp; makeup air ducting, grilles etc&lt;br&gt;In Kitchen ventilation

APP- J - UPS and Inverter wiring

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.20 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.29 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm

2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

od51074/2020_2021 : Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required &lt;br&gt;63A10K DP MCB( &apos;C&apos; Curve )&lt;br&gt;

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.12.2 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

APP- K - LIGHTING PROTECTION SYSTEM

6.4 : Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

6.7 : Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For horizontal run)

6.8 : Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For vertical run)

6.12 : Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

6.14 : Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

6.2 : Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required.

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od50942/2020_2021 : Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.&lt;br&gt;2 x 25 x 3 mm tinned copper strip

od50952/2020_2021 : Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.&lt;br&gt;25 x 3 mm copper strip tinned at the points of contact

od50962/2020_2021 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required&lt;br&gt;25 x 6 mm brass bolt &amp; nut

APP - L - FIRE FIGHTING SYSTEM

od50890/2020_2021 : Under Ground/Above ground piping:-Providing, laying, testing and commissioning of &apos;C&apos; class heavy duty&lt;br&gt;MS pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing&lt;br&gt;the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel&lt;br&gt;paint of required shade complete as required. The under ground pipes should be given 2mm thick&lt;br&gt;anticorrosive wrapping and coating. The pipes shall be tested for a test pressure of 14Kg/sq.cm and&lt;br&gt;holding in 24 hours&lt;br&gt;100 mm dia &apos; Class heavy duty MS pipe

od50898/2020_2021 : Under Ground/Above ground piping:-Providing, laying, testing and commissioning of &apos;C&apos; class heavy duty&lt;br&gt;MS pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing&lt;br&gt;the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel&lt;br&gt;paint of required shade complete as required. The under ground pipes should be given 2mm thick&lt;br&gt;anticorrosive wrapping and coating. The pipes shall be tested for a test pressure of 14Kg/sq.cm and&lt;br&gt;holding in 24 hours&lt;br&gt;80 mm dia &apos; Class heavy duty MS pipe

od50906/2020_2021 : Supply and providing class C Heavy duty MS pipe with all required specials fasteners supports etc complete of size 65mm dia

od50915/2020_2021 : ABOVE GROUND/UNDER GROUND PIPING:- Supply,erection,testing and commissioning of M S pipes&lt;br&gt;of the following sizes&quot;c&quot; class conforming to IS 1239 with required attachment including necessary&lt;br&gt;bends,tees, reducers, flanges etc. the pipes cut in required length and joined with necessary bots and&lt;br&gt;washers. the piping should be given primer and two coats of red color enamel painting and under ground&lt;br&gt;pipe should be given anti corrosive wrapping including earth work excavation.50 mm dia&lt;br&gt;

od50922/2020_2021 : ABOVE GROUND/UNDER GROUND PIPING:- Supply,erection,testing and commissioning of M S pipes&lt;br&gt;of the following sizes&quot;c&quot; class conforming to IS 1239 with required attachment including necessary&lt;br&gt;bends,tees, reducers, flanges etc. the pipes cut in required length and joined with necessary bots and&lt;br&gt;washers. the piping should be given primer and two coats of red color enamel painting and under ground&lt;br&gt;pipe should be given anti corrosive wrapping including earth work excavation.32 mm dia

od50930/2020_2021 : Supply and providing class C Heavy duty MS pipe with all required specials fasteners supports etc complete of size 25mm dia

od50940/2020_2021 : AIR CUSSION VESSEL:- Supplying, Installation, Testing &amp; Commissioning of air cushion tank ( air&lt;br&gt;vessel) of continuous welded construction, fabricated out of atleast 8mm thick steel with dished ends,&lt;br&gt;galvanised to IS:4736-1968 and supporting legs, 250mm dia &amp; 1200mm high complete with necessary air&lt;br&gt;release valve, safety valve, pressure gauge, flange connection to the wet riser piping with necessary&lt;br&gt;piping to meet the functional requirement of the system.&lt;br&gt;Net

od50953/2020_2021 : Hydrant Valve:Supply,Installation,Testing and commissioning of single headed hydrant valve conforming to IS 5290 and with ISI mark of 3mm dia.Oblique type with instantaneous house coupling adapter(Make Newage/wico/Zenith)

od50956/2020_2021 : Pressure Gauge:Supply,fixing,testing and commissioning of 0-15Kg/sqcm 100mmdia Dial type pressure gauge with isolation cock and pipe etc Hydrant station as per specification

od50963/2020_2021 : Pressure Switch:Supply,installation,testing and commissioning of pressure switch bellow type of approved make

od50969/2020_2021 : Non return valve:Supply ,Installation,Testing and commissioning of non return valve working 14KG/cm2 working pressure 150mm dia

od50979/2020_2021 : Non return valve:Supply ,Installation,Testing and commissioning of double flanger horizontal type non return valve/relex valve as per IS 5312 of following sizes having CI body and gun moving parts with nuts,bolts,gaskets etc and tested to 14KG/cm2working pressure 80mm dia

od50983/2020_2021 : Branch Pipe:Supply,Installation,Testing and commissioning of gun metal short branch pipe conforming to IS 903 and with ISI mark with 63mm female hexagonal base nozzle(Make neage/winco/Zenith)

od50990/2020_2021 : Non-Return Valve:Supply,Installation,Testing and commissioning of double flanged horizontal type non retun valve/reflex valve as per IS 5312 of following sizes having CI body and Gun moving parts,with nuts,bolts,gasketsetc and tested to 14Kg/cm2working pressure 100mm dia

od50993/2020_2021 : Butterfly Valve:Supply,Installation,Testing and commissioning of double flanged sluice valve of following sizes conforming to IS 14846/2000 with CI wheel bolts nuts washers,rubber gasket etc complete and tested to 14Kg/cm2working pressure 100mm

od50997/2020_2021 : Butterfly Valve:Supply,installation,Testing and commissioning of double flanged sluice valve of following size conforming IS 14846/2000 with CI wheel bolts nuts washers,rubber gasket etc complete and tested to 14Kg/cm2 working pressure,80mm dia

od51003/2020_2021 : Supply and fixing first aid hose reel with construction spray painted in post office red drum and brakets conforming IS 884 with upto date amendments,complete with the following as required (a)30m long 20mm (norman internal)dia water hose thermoplastic for foxing the equipments on wall&lt;br&gt;(b) connections from riser with 25mm dia stop valve &amp; MS pipe

od51006/2020_2021 : Foot Valve:Providing and fixing the following sizes of cast iron type foot valve with strainer to the pump set complete with bolts,nuts,gaskets if any as required(make Kalpana,Krilosker)150mm

od51015/2020_2021 : Foot Valve:Providing and fixing the following sizes of cast iron type foot valve with strainer to the pump set complete with bolts,nuts,gaskets if any as required(make Kalpana,Krilosker)100mm

od51017/2020_2021 : Sprinkler Bulb:Supply,Installation,Testing and commissioning of Sprinkler bulbs of 68 Dege

od51021/2020_2021 : Heat Detector:Supply,Installation,Testing and commissioning of heat detector dual chember dual source with base plate as per site conditions (make system sensor/apollo/siemens)

od51026/2020_2021 : Smoke Detector:Supply,Installation,Testing and commissioning of ionization type/multy sensing type smoke detector with complete accessories

od51029/2020_2021 : Hooters:Supply,Installation,Testing and commissioning of Audio alarm hooters

od51032/2020_2021 : Manual call point:Supply,Installation,Testing and commissioning of manual call point(Break glass type)with hammer and chain

od51037/2020_2021 : Fire Alarm panel:Supply,Installation,Testing and commissioning of control panel 4 zone complete with charger,rectifier,alarm display with all other necessary attachments with provision for public addressing system and battery backup

od51041/2020_2021 : Supply and providing 5 Kg dry chemical powder type fire extinguisher with hose and clamps including fixing to wall as required

od51044/2020_2021 : Fire brigade:Supply,Installation,Testing and commissiong of Fire brigade connection of gun metal inlets

od51046/2020_2021 : Air release Valve:Supply,Installation,Testing and commissiong of Air release valve 20mm gun metal

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

2.1.4 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.125 Amp TP & N

2.1.5 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

od51060/2020_2021 : Supply and providing 160/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

od50996/2020_2021 : supply,installation and testing of 3 phase multi function to read w,Wh,Pf or va,varh accuracy class 0.5

od50961/2020_2021 : Enameled Danger Notice board of size 100x75mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

od50977/2020_2021 : Supply,installation and testing of LED indicator for all voltage range with Green/red/Yellow colour s

od50982/2020_2021 : Supply,installation and testing of LED indicator for all voltage range with Blue colour

90.12.5.31 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.41.6 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

od51114/2020_2021 : Supply and laying2x1.5 sqmm copper conductor PVC insulated and sheathed armoured (FRLS) fire proof cable conforming to relevant IS/Fire protection laws including termination complete as per specification as required

9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

od51132/2020_2021 : Supply and providing fire pump control system consisting engine starting relay ,12 pin DC relays battery charger with over charge protection etc on existing panel giving connections etc as required

od51093/2020_2021 : Illuminated flush head actuator - Green with legend &quot;OFF&quot; with 1 NO contact.

od51097/2020_2021 : Illuminated flush head actuator - Green with legend &quot;ON&quot; with 1 NO contact.

90.14.28.2 : S & F Motor starters of the following ratings

90.14.28.8 : S & F Motor starters of the following ratings

od51146/2020_2021 : &gt;Supply,installation,testing and commissioning of Horizontal mounted end suction type electric motor&lt;br&gt;driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller,including all&lt;br&gt;accessories operating on Three phase 50Hz,415V AC supply including foundation,bolts etc.complete.&lt;br&gt;The pump set shall be of 3.73KW / 5 HP

od51150/2020_2021 : DIESEL ENGINE DRIVEN PUMP:- Supply Installation, testing and commissioning of Main Diesel Engine&lt;br&gt;driven pump of centrifugal end suction type suitable for automatic operation rated for 2280 LPM at 60m&lt;br&gt;head at 38HP high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a diesel&lt;br&gt;engine water cooled with radiator, Complete with auto&lt;br&gt;starting mechanism, 12 Volts/ electric starting&lt;br&gt;equipment , Diesel tank, exhaust pipe extended up to 1.0&lt;br&gt;m.out side pump house duly insulated with&lt;br&gt;50 mm. thick glass wool with 1.0 mm. thick aluminium sheet&lt;br&gt;cladding, residential silencer,&lt;br&gt;instruments and protection as per specification, stop solenoid for auto stop&lt;br&gt;in the event of fault with&lt;br&gt;audio indications, painted with post office red colour etc. as required at 1800 RPM including supply of all&lt;br&gt;accessories such as common base plate suitable foundation for engine and pump, vibration damping&lt;br&gt;arrangements, Battery, coolant, lubricating oil, exhaust piping, necessary controls such as pressure&lt;br&gt;switch and interconnecting cable from control panel to Battery etc.

od51153/2020_2021 : MAIN FIRE PUMP:- Supply Installation, testing and commissioning of Fire fighting Main pump electrical&lt;br&gt;motor driven type rated for 2280 LPM at 50m head high efficiency volute type with cast iron casing,&lt;br&gt;Bronze impeller Pump coupled to a squirrel cage induction motor SPDP including supply of all&lt;br&gt;accessories with supply condiion 415V,50Hz, 3 phase floor mounted type rated for 35HP and 2900 RPM&lt;br&gt;including supply of all accessories such as coupling, vibration damping arrangements, coupling guard&lt;br&gt;base frame foundation bolt etc.&lt;br&gt;

od51155/2020_2021 : Supply,erection,testing and commissioning of 6 watts wall mounted type speaker for PA system

od51157/2020_2021 : Supply and erection of microphone for intelligible,crisp and bright sound suitable for app type of PS applications supplied with quick detachable holder with 3 pin professional XLR connector &amp; 6 meter twin core shielded10W noise cable

od51159/2020_2021 : Supply,Installation,Testing and commissioning of solid state Amplifier of 60A RMS output in rack including necessary control wire,Jack etc complete as required

od51160/2020_2021 : Supply,erection,testing and commissioning of talk back field device

od51162/2020_2021 : SIGN BOARD:Supply and erection of glow sign board made of 3mm thick PVC form board for each floor 12&apos;&apos;x4&apos;&apos;(fire lift,Passenger lift,electrical duct,fire station ,main stair,Fire exit,floor display and pump room)

od51167/2020_2021 : Supply and erection of Assembly point sign board 16&apos;&apos;x16&apos;&apos;

od51168/2020_2021 : Supply and erection of fire escape rout in each floor having size 12&apos;&apos;x16&apos;&apos; made of 3mm thick acrylic sheet with glass frame

od51171/2020_2021 : Supply and providing emergency fire escape lighting system consisting of 2 nos lamp 7AH battery charging unit,exit sign display etc in MS enclosure

90.6.10.1 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

90.6.4.2 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.4.4 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.5.4 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

od51185/2020_2021 : No objection certificate fee to remitted to fire department

APP- M - Electrical Miscellaneous

od50891/2020_2021 : Supply and fixing 2mm thick slotted rails for conduit laying suspended from threaded down rods with expansion bolt and all necessary accessories complete

od50894/2020_2021 : Supply and fixing 8mm/10mm threaded down rods with expansion bolt and all necessary accessories complete

od50907/2020_2021 : Supply and laying optical fiber cable OS2 single mode 4 core outer cable through rigid 20/25mm conduit

od50923/2020_2021 : Supply and providing of emergency trip push button in metal enclosure with breakable glass cover

od50931/2020_2021 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.&lt;br&gt;

od50941/2020_2021 : Supply and installation for providing fire sealant mortar(make OBO) with 15cm thickness for fire proof partition between floors in the electrical ducts

od50948/2020_2021 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint &apos;FIRE&apos; mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.&lt;br&gt;

od50957/2020_2021 : Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength. &lt;br&gt;

od50964/2020_2021 : Supply and providing MS chequered plate of suitable thickness including cutting, welding, painting etc. as required for the cable trench covering.&lt;br&gt;8mm thickness

od50970/2020_2021 : Supplying and installation of supports, anchor bolts etc made out of suitable size single section channel etc as required including painting with 2 coats of synthetic enamel paint &lt;br&gt;

od50973/2020_2021 : Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint&lt;br&gt;

od50984/2020_2021 : Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.&lt;br&gt;

APP - N - SITC of PA System

od50985/2020_2021 : Supply,Installation ,Testing and commissioning of ceiling mounting speaker 6W

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

App - O - SITC of Networking system

od50933/2020_2021 : Supply,Installation and commissioning of CAT6 Keystone Jack

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable

1.53.3 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable

od50998/2020_2021 : Supply,Installation,testing and commissioning of IPB boxand 6P&amp;T line,Digitalline extension

od51004/2020_2021 : Supply,installation of KTS with 40 keys DSS

od51005/2020_2021 : Supply,installation of KTS with 12keys

od51013/2020_2021 : Supply and Installation of Krone module

od51016/2020_2021 : Supply,Installation of 50 pair termination box

od51022/2020_2021 : Supply,Installation of 100 pair termination box

od51027/2020_2021 : Supply,installation of PRI card

90.6.9.2 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit

90.6.9.3 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit

90.6.9.4 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit

90.6.9.5 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit

90.6.9.6 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit

90.6.9.7 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit

1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.

1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.23.7 : Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.TV antenna socket outlet

od51075/2020_2021 : Supply and providing HDMI cable

od51078/2020_2021 : Supply and providing VGA cable

Build Tech Asdociates

Bidder Name

LALUMON CHANDRAN

Build Tech Asdociates