SPECIAL REPAIR TO BLDG. NO 8F (GP C AND D CIV QTRS) AT RIMC DEHRADUN

Amount

Dismantling of steel/galvalume sheets of any description (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section, in any position for framed work complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section, in any position for unframed work complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Dismantling wall and ceiling board of any description complete all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling of cast iron/ PVC /AC /SGSW pipes along with fittings and accessories up to 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

Taking up or down 15 mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed.

Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed by Engineer-In- Charge.

M & L for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and directed.

M & L for treating the back fill in contact with foundation at the rate of 7.50 ltr of emulsion per sqm of vertical surface complete all as specified and directed.

M & L for treating the top surface of filled earth at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 ltr of emulsion per meter of the perimeter wall complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft and loose soil complete all as specified and directed..

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed..

M & L cement concrete M-25 design mix (using 20mm graded aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc complete all as specified and directed..

M & L cement concrete M-25 design mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab, chajjas etc and in shelves and this like complete all as specified and directed..

M & L cement concrete M-25 design mix (using 20mm graded aggregate) for columns, pillars, piers, post and strut complete all as specified and directed..

M & L cement concrete M-25 design mix (using 20mm graded aggregate) for beams, cantilevers, beressummers, lintels over 1.5m span complete all as specified and directed..

M & L for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed..

M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surface complete all as specified and directed..

M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilever shelves etc. for fair finished surface complete all as specified and directed..

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. for fair finished surface complete all as specified and directed..

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm etc. for fair finished surface complete all as specified and directed..

M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per srl item No 33 above but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M & L excavated earth for spreading and leveling in layers n exc.25 cm thick and well ramming including watering as required complete all as specified and directed.

M & L for hardcore of broken bricks of gauge n exc. 63 mm , deposited , spread and leveled and compacted in layers n exc. 15 cm thick , watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed..

M & L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in plinth protection complete all as specified and directed..

M&L for rendering 10mm thick on other than fair face of brick work surfaces in CM 1:4 complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Glazed ceramic tiles coloured 300mmx 450mm , 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and directed.

M&L 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/window cill/skirting /platform counter top WHB including cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.

M&L for brick work with old size common burnt clay bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonry wall surfaces or on other than fair faces of brick masonry finished even and fair without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid seprately.

M&L for rendering 5 mm thick in CM 1:3 as on concrete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary from work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for 3 mm thick APP modified prefabricated in five layers (for roof/sunken) & weight not less than 3.6 Kg/Sq mtr water proof membrane reinforced with non-wooven polyster with two coat of water proofing aluminium paint over top surface of water proofing membrane with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused with LPG flames laid over a coat bitumen and bituminous of primer over after cleaning existing plastered surfaces as per manufacturer instruction of APP modified membrane etc. APP modified membrane shall be laid on primed surface by torch application method after allowing 24 hours for primer to dry as under complete all as specified and as directed.

(a) First coat of bitumen primer conforming to IS-3384 @ 0.4 Kg/Sqm. (b) Second coat hot paving bitumen of Grade 85/25 confirming to IS-73, applied @1.20 Kg/Sqm (c) third layer of APP based polymeric membrane land on bituminous surface by torch application (d) Laying of aluminium paint @ 200gm/Sqm in two layers each layer of 100gm/sqm over polymeric membrane complete all as specified and as directed by Engineer in charge. Note:(i) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed

S&F for 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/gauge shall be measured and paid for separately.

S&F 9 mm thick (with min 5 Ns of ply ) plywood grade BWR type BB, fixed with screws to timber frame work/ doors complete all as specified and directed..

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 50 mm Single Rebated ,made from wpc material comprising of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and direct.

Supply & fixing 30mm thick pre laminated WPC factory made moulded door shutter consisting of solid core single leaf flush door of 25mm thickness, lipped with 15mm (5mmx3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails, The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and / or prelam colour on one side after routing the moulded design on flush door & 2mm plain and / prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. colour / pattern of laminate to be approved by GE complete all as specified and as directed.

S & F factory made steel windows (Box Type) with side hung shutters precoated (colour coated/powder) with double shutter (glazed and gauged shutter both) with frame complete all as specified and directed and shown on Drg TD 158 Sheet ½ & sheet 2/2. Note :- Measurements shall be taken and paid compositely for frame, glazed and gauged Grill shall be measured and paid separately under respective item. No extra claim shall be entertained on this ground.

S&F in repairs vitreous china wash down water closet pan padestral pattern with spun pipe ‘P’ or ‘S’ trap,white, including PVC seat cover and connection to drain or outgoing pipe and flush pipe , anti syphonize pipe etc fixed complete all as specified and as directed Make :- Hindware Cat no 20044, Jaquar Cat no CNS-WHT-551PN, Cera Cat no S1059103 S, S1059104P

S&F for factory made box type powder coated steel ventilator fixed type with glazing bars complete welded including a shop coat of red oxide zinc chrome primer complete all as specified and as directed. (Drg no 158 sheet 1/2 & 2/2) Note: Glass shall be measured and paid separately.

S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specified and directed.

S&F sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc complete all as specified and directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F double legged floor door stopper 150 mm long aluminium alloy with rubber etc complete all as specified and as directed

S&F ball catches with 8 mm dia steel ball magnet catches for cup board shutter including striking plate as approved etc complete all as specified and as directed

S&F continuous (piano) hinges, mild steel, bright finish or eletro galvanised with of flap (when open) 30 mm etc complete all as specified and as directed.

S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with including brackets 02 Nos finial 02 Nos) etc complete all as specified and as directed

S & F glossy finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as specified and directed.

S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S&F 500 litre ISI marked rotational moulded triple layer polyethylene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and directed.

M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F in repairs vitreous chinaware coloured wash hand basin complete, CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. Make Parryware Cat No. C8980, Ped Cat No C8987, Hindware Cat No 91049 Ped 91116

S & F Brass CP wall mixer 15 mm bore (wall mounted type) for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed Cat Part No:- Make Jaquar Cat No FUS-29273 UPR, Hindware Cat No F390020, Parryware Cat No G0216A1.

S & F Brass CP sink mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed Cat Part No:- Make Jaquar Cat No CON-CHR 309 KNM, Hindware Cat No F740023.

S & F in repair fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. Model No: F 7010305 of Cera , Hindware Model No F160006 , Parryware Model No T9985 A1

S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed Cat Part No:- Make Jaquar Cat No FUS-29037 fusion, Parryware Cat No G2304A1, Cera Model No F1014151.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

All as per srl item No 87 above but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed

SS & F Brass CP WHB mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed Cat Part No:- Make ARI 39001B Aria of Jaquar, Hindware Model No F280010 SCP, Cera Moedel No F2013451.

S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F fancy type glass corner 300mm radius of 10mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. Model: ACN - 1173 of Jaquar, Parryware Model No T6010A1, Cera Model No F505101

S&F in repairs vitreous china squatting pan Orissa pattern long pan size 580 mm x440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F in repair PVC low level flushing cistern 10 litres, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. Model :- Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32, Parryware Cat No 8177*, Cera Cat No B1810110 fittings snow white

S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) including cockroach trap with gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed

S&F 50 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

S&F for 75 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

S&F for 100 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed

S&F 75mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed

S&F 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed

S&F 75mm bore cast iron Tee of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed

S&F 100 mm bore cast iron Tee of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed

S&F 50 mm cast iron cowls spun pipe (conforming to IS 3989) complete all as specified and as directed

S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed independently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed

M&L for applying two coat of oil bond distemper white or any tint over a coat of primer etc over prepared surface of putty complete as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new wall surface and applying waterproof wall putty 2 mm thick (Asian /Berger/JK) to make the surface smooth complete all as specified and directed.

M&L two coats of whether proof exterior emulsion paint on brick/concrete wall surfaces plastered surface of walls all as specified in SSR Part I and directed by Engr-in-Charge. (Note : The work will be carried out up to tipple storey building, the rate of scaffolding is included for this item also. Applying coat after completion of preparation of surface as per item as above and stage has to be passed by Engr-in-charge before complete all as specified and directed)

M&L cement concrete 1:5:10 type E-2 using 20mm graded brick aggregates as in sunken portion etc complete all as specified and as directed.

S & F 32 mm dia GI pipe, Medium grade as in spout pipe in sunken floor complete all as specified and directed

S & F factory made WPC single extruded 100 % lead free ROHS certified board of 18 mm thick pre laminated moulded shutter for kitchen cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg/cum manufactured by an ISO 9001:2015 certified company. The 18 mm board should be 100 % lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug/waste pipe washers including cantilever bracket or, connecting unions etc over all size 915 x 460mm with bowel size 410mm x 330mm x 160mm complete all as specified and as directed

S&F kitchen plate rack stainless steel 1 mm thick of size 90cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

S & F 0.80 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs, walls, etc with grade of zinc coating min 275 micron complete all as specified and directed

S & F 18 to 20 mm thick polymerized pre formed bituminous filler board complete all as specified and directed.

S & F 200 mm wide modified flexible polyolefin (FPO) sikadur-combiflex sg-10p flexible water proofing tape of thickness not less than 2 mm thick complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick (as approved GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade /colour / matrix of tiles as in floor etc. including 15 ,mm thick cement screed bed in CM 1:6 etc complete all as specified and as directed complete all as specified and directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mi-tred/stopped ends etc. complete all as specified and directed by Engineer-In- Charge

Rough excavation n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed by Engineer-In- Charge.

Removing excavated material exceeding 250M but not exc 500m and depositing where directed. complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2 for 150 mm dia in concrete bed to drain pipes including packing under and haunching against the sides of pipes etc complete all as specified and directed.

M & L for reinforced concrete pipes,150mm dia class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-In- Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer-In- Charge. (Water proofing compound shall be measure and paid separately).

M&L for 15mm thick rendering on other than fair faces of brick work in CM 1 : 6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc complete all as specified and directed by Engineer-In- Charge.

M&L PCC 1:3:6 type C0 ( using 12.5 mm thick graded stone aggregate) as in surface channel drain complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M & L for point wiring with 1.5 Sqmm (Nominal Area) FRLS-H, PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metallic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches including modular sunken box, modular frame and plate for mounting modular switches, switch socket combinations , fan regulators etc., as required with 3mm thick plastic laminated sheet top cover all as specified and as directed for the following points :-

(a) one light point controlled by one switch

(b) one ceiling / exhaust fan point controlled by one switch

(c) one three pin modular socket out let 5/6 amps on independent board complete.

(d) one three pin modular socket out let 5/6 amps on Same board complete.

(e) one call bell point controlled by one bell switch

(f) one 2 way light point controlled by two 2 way switch

All as per item No135 above but with 2.5 Sqmm (Nominal Area) FRLS-H PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin modular socket out let 15/16 amps on independent board.

All as per item No 135 above but with 4.0 Sqmm (Nominal Area) FRLS-H, PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin modular socket out let 15/16 amps on independent board for geyser or AC point. Note for Sr. No 135,136 &137 : Necessary PVC rigid, concealed type junction boxes for identifying junction as required on site directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted

S&F modular switch 1 module, 6A 230 Volts complete all as specified and directed.

S&F bell push switch modular 1 module 6 Amps 230 Volts, SP complete all as specified and directed.

S&F modular switch 2 way 1 module 6 Amps, 230 Volts complete all as specified and directed.

S&F modular switch 1 module, 15A, 230 Volts complete all as specified and directed.

M & L ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as specified and directed.

S&F modular socket 2 module, 6A, 230 Volts outlet 2 in 1, 3 pin complete all as specified and directed.

S&F modular socket 2 module, 16A, 230 Volts, 2 in 1, 3 pin, complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate angular type complete all as specified and directed.

S & F LED lamp base B-22 (holder type) 12 watts complete all as specified and directed. Make 1) Phillips Model Stellar Bright High Wattage,15000 Life Hour 2)Wipro:Tejas 12W LED Bulb. 3) C&S : CHANDRA/12W/W

S & F call bell, ding dong AC 230 Volts, single phase complete all as specified and directed.

Taking down ceiling fan/Exhaust fan ceiling cable end, dismantling blades and removing fan and Each blades to E/M store yard complete all as directed

Supply and fixing ceiling fans complete with blades, down rods, without electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE with brushless direct current motor (BLDC) with remote control (Colour of ceiling fan is approved by GE) complete all as specified and directed. Make : Orient electric automiser, Crompton Energion HS 1200, Havells efficiencia.

Supply and Metallic Heavy duty Exhaust fan continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 1400 rpm, 240V, complete all as specified and directed. Make Havells cat pt no Turbo force SP or equivalent in Bajaj, Khaitan, C&G, Usha.

Supply and Metallic Heavy duty Exhaust fan continuous duty with louvers, with fixing arrangements & making hole of suitable size if necessory for 250 mm sweep, 240V complete all as specified and directed. Make Havells cat part no Turbo force SP or equivalent in Bajaj, Khaitan, C&G, Usha.

Taking down energy meter of any capacity including connection and refixing the same complete all as directed.

S&F LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders, including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. Make :- PHILIPS BN308C LED20S-6500 L120 PSU WH, HAVELLS/ Crompton

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders, including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. Make :- PHILIPS 34034/14/86, WIPRO magma, Luker LMR 10,

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size complete all as specified and directed. Make:1) Phillips Cat Part No-BRP046 LED 39 CW MR S1 PSU GR 2) Havells Cat Part No-ENDURAPEARLNEOSL40WLED757 PASYTOPC 3) Wipro cat Part No- LR02-451-XXX-57-G1

S&F LED decorative wall Lights 9 W 230 V complete all as specified and directed. Make: Philips : Grace Wall light/ Philips/Crompton

M & L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multi stranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multi stranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.

M & L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multi stranded copper conductor cable conforming to IS specifications with 3 runs of 4 sqmm single core multi stranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i) 3 runs of cable and 1 run of conduit with necessary accessories will be measured as one unit length.

S&F in replacement sheet metal enclosure powder coated ,MCCB DB, 'G' frame TPN vertical D/D, 4 way confirming to IP-43 Protection including one number MCCB, three pole, 100A, 25KA for incoming bus bar, neutral links, blanking plates etc, complete all as specified and directed. complete all as specified and directed. Make-Indoasian, 811888 or equivalent in C&S/Legrand

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps.Neutral link, Earth bar, double door SPN 8 way 230 volts complete all as specified and directed. Make- Indoasian/Legrand/Havells

S&F Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp complete all as specified and directed. Make :Havells/L&T/Legrand. Make- Indoasian/Legrand/Havells

S&F MCB Single pole 240 volts 6-32 Amps, 10KA, B-series, complete all as specified and directed. Make Havells DHMGCSPF006-032 or Equi in L&T, Ligrand, indoasian

S&F MCB SPN 240 volts 0- 32 Amps, 10KA, B-series complete all as specified and directed. Make- Havells DHMGCSNF006-032 or L&T/Legrand/indio asian

MCB TPN 240 volts 25- 100 Amps, 16KA, B-series complete all as specified and directed. Make- Havells/L&T/Legrand/indio asian for xisting LT panel board

M & L Earthing complete with galvanised steel earth plate electrode 60×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note : (i) If the desired earth resistance is not found within permissible limit, item shall be re-done by Contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15mm dia pipe medium grade upto 7.5m is deemed to be included in the rate quoted for this item.

S&F electric water heater, storage type steel body with copper inner tank and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, Automatic Thermal cut-out and multi function valves, NRV, 450 mm brass connection pipe etc. Make- Havells monza DX/Usha Aquerra/ Racold Classico

SRI GANESH ENTERPRISES