Const. of Veterinary Poly Clinic at village Beholi in Distt. Kurukshetra (Pdg. Internal EI Only).

Amount

CEILING FAN/ EXHAUST FAN Supply, erection, testing of Ceiling fans IS marked (as per IS code 374)with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm) HSR No . 20.71.1

Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheetducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. HSR No . 20.72

Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR No . 23.1.6.1

1 run of Size 2.50 Sqmm(1.1.80mm) HSR No . 23.1.6.2

1 run of Size 4 Sqmm(1/2.24mm) HSR No . 23.1.6.3

Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. Group B HSR No . 23.2.2.2

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe, without separate control switch , Modular type Switch/sockets wiring Group B HSR No . 23.2.3.2

Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B HSR No . 23.2.4.2

Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLs copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B HSR No . 23.2.5.2

Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 20 mm dia. HSR No . 23.6.6.1

MS pipe of 25 mm dia. HSR No . 23.6.6.2

MS Pipe of 32 mm dia. HSR No . 23.6.6.3

PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS PVC CONDUIT and MS/GI BOX only for LIGHT/FAN/Call bell point wiring Group B HSR No . 23.7.1.2

FITTING AND ACCESSORIES Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Switch 5 amp. on existing sheet. HSR No . 23.8.1.1

Wall socket 5 amp on existing sheet. HSR No . 23.8.1.2

Bakelite angle/straight button holder large size. HSR No . 23.8.1.12

Socket size rotary step type Electronic regulator for A.C. ceiling fan HSR No . 23.8.1.13

Call bell 220/230 volts musical type HSR No . 23.8.1.6

Bell push HSR No . 23.8.1.9

Supply and Fixing Bakelite sheet on existing MS/GI/wooden/PVC box etc including fixing with brass screws and washers. HSR No. 23.8.2 Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. HSR No . 23.8.4

Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required HSR No . 23.2

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP HSR No . 23.22.2.1

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) HSR No . 23.22.4.2

TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR No . 23.22.4.5

TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) HSR No . 23.22.4.7

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR No . 23.22.5.1

6 amp. to 32 amp Double POLE HSR No . 23.22.5.3

6 amp. to 32 amp MCB's TRIPLE POLE HSR No . 23.22.5.5

MS STAND, BUS BAR CHAMBER AND PANELS Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. HSR No . 23.24.1

EARTHING AND LIGHTENING ARRESTOR Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR No . 24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR No . 24.1.2

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR No . 24.1.3

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR No . 24.1.5

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. HSR No . 24.1.11

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR No . 24.1.13

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. HSR No . 24.1.7

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. HSR No . 24.1.8

Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core HSR No . 24.2.4.2

50 Sq mm to 150 sqmm 2 to 4 Core HSR No . 24.2.4.3

Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core HSR No . 24.2.7.3

70 sqmm to 95 sqmm Cable 3 to 3½ Core HSR No . 24.2.7.4

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR No . 24.5.2.4

WIRING SWITCHES AND ACCESSORIES MS CLAMPS EL035

32A D.P. Main Switch With Key Ring Tag 2 Module EL064

MS sheet EL211

Supply of 25 Sqmm 4Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-1

Supply of 35 Sqmm 4Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-2

Supply of 95 Sqmm 3.5Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-3

Supply & Erection of MS box of size 8”×10”×4” (20cm×25cm) and 10cm deep made one of 1.6mm thick MS covered with 5mm thick bakelite sheet for fixing of 4no. socket and switch of 6amp. And one no. sock-et and switch Of 15 amp. Including fixing of one no. fuse unit and indicator of approved make. The MS box is recessed in wall including cost of necessary cement sand & mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete then job in all respect up to the entire Satisfaction of Engineer-in-charge of work. NS-4

KABIR ELECTRICAL ENTERPRISES