Balance work of Street at ITI chowk to Shiv Mandir and adjoining Path in Ward No.13

Amount

Demolition below G.L. upto 1.50Metres depth and disposal of unserviceable materials within 20 metres lead. Un-reinforecd cement concrete upto 15 cm. Thickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Dismantling steel work uptospan of 10 metres and height between ridge and floor level upto 5 metres in single sections including dismantling and stacking the materials within 20 metres lead (Riveted work where rivets are required to be cut shall be measured and paid for parately).Channels, angles, tees and flats including carriage of material in all leads and lift and direction of Engineer-in-charge.

Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky portion requiring blasting upto a distance of 20 metres dosposing of un-serviceable materials, stacking serviceable materials and neatly dressing the surface including carriage of material in all leads and lift and direction of Engineer-in-charge.

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. in Pick work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work inVertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,buttresses, plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framedwork,including cutting ,hoisting,fixing in position and applying apriming coat of red lead paint.In gratings framed guardbars,ladders,railling,brackets and similar works including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in:in foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cementconcrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 20 mmnominal size) and curing completeexcluding cost of form workin: Walls including attacheduttresses,pilasters and their capsand bases string courses etc. uptofloor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying heavy duty precast cement conrete inter locking paver blocks locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid seperatly) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (1 cement:2sand:4graded stone aggregate 20mm nominal size) excluding cost of centring and shuttering in: Foundations and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

anuj gupta