New Gujrat Pettern 2025-26, Construction of Anganwadi Bulding at Various Villages of Kaprada Taluka, Dist.Valsad (KPR/Aganwadi-1, Total 9 nos Work) (1) Kolvera-1 Mulgam Faliya (2) Tukwada-1(3) Dharanmal Mulgam (4) Bhatheri Mulgam (5) Piproti Mulgam (6) Chichpada -1 (7) Kaprada -2(8)Kaprada-3 (9) Divasi-1 (Re-invite)

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Excavation for foundation up to 1.5 M depth including 429.21 Cu.mt. 162.38

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter lead. (B)

Dence or hard soil.

2 Providing and laying cement concrete 1:3:6 (1-Cement : 63.00 Cu.mt. 3005.76

3- coarse sand : 6- Graded stone aggregates

mmnominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth (upto 10 ton)

3 Providing and laying cement concrete M.200 and curing 71.19 Cu.mt. 4004.01

complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete (upto 10 ton)

4 Providing and laying cement concrete M.200 with 39.60 Cu.mt. 4590.14

curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in

(B) COLUMNS:(i) Having cross-sectional area 0.12 to

5 Providing and laying damp proof course 25mm thick 7.32 Cu.mt. 310.30

cement concrete 1:2:4 (1 Cement : 2 coarse sand :

stone aggregate 10mm nominal size) and curing complete

6 Providing and laying cement concrete M.200 with 59.40 Cu.mt. 4491.32

curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work

in(A) BEAMS :(i) Having cross-sectional area 0.12 to

7 Brick work using common burnt clay building brick 40.50 Cu.mt. 4021.02

having crushing strength not less then 35Kg/Sq.Cm. In

foundation and plinth in cement mortar 1:6 (1 Cement :

6 fine sand) (B) Conventional

8 Filling available excavated earth (excluding rock in 351.82 Cu.mt. 130.39

trenches plinth, sides of foundations etc. in layers not

exceeding 20 cm in depth consolidating each deposited

layer by ramming and watering).

soil in layers of 20cm thickness including watering

ramming and consolidating etc. complete

10 Providing and laying cement concrete 1:3:6 (1- Cement : 36.00 Cu.mt. 3005.76

3- Coarse sand : 6- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in Plinth Slab

11 Brick work using comon burnt clay building brick 180.00 Cu.mt. 4295.99

having crushing strength not less then 35Kg/Sq.Cm. In

foundation and plinth in cement mortar 1:6 (1 Cement :

6 fine sand) in super structure above plinth level up to

floor two level (B) Conventional

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

12 Providing and laying ordinary cement concrete M200 for 0.90 Cu.mt. 4491.32

R.C.C. Lintel including finishing smooth with curing

etc. complete including the cost of formwork but

excluding the cost of reinforcement.

13 Providing and laying cement concrete M200 for 1.96 Cu.mt. 4542.94

reinforced concrete CHAJJAS not excceding 10cm

thickness up to floor two level including finishing the

exposed surface with cement mortar 1:3 (1 cement :

fine sand to give a smooth and even surface centering

and formwork and curing compelete excluding cost of

reinforcement

14 Providing and fixing 30mm thick shutters doors of pine 51.30 Sq.Mt 3030.00

wood waterproof ply with both side wooden laminate

including Black Granite frames in two parts including

Edge polish and molding and brass fixtures, labour

charges and fastening etc. complete as directed by

Engineer incharged

15 Providing and fixing Jindal or similar brand two track 45.00 Sq.Mt 3030.00

sliding window of 18mm x 38mm section with one way

glass of 6mm thickness including Granite frame

inclusive of edge polish and molding, sealant and

transperent silicon between the glass and the window

frame and also including fixtures and fastening etc

complete as directed by Engineer incharged

16 Providing 15mm thick cement plaster in single coat on 1890.00 Sq.Mt 220.01

brick/concrete wall for interior plastering upto floor two

level finished even and smooth in (i) Cement mortar 1:3

(1 cement : 3 sand) with one smooth cement neat

finished last layer.(Smooth finished)

17 20mm thick sand faced cement plaster on wall up to 1574.10 Sq.Mt 300.66

height 10meters above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1 cement : 3 sand) and

8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand)

etc. complete

18 Providing and laying 24" x 24" vetrified 8mm thick tile 414.90 Sq.mt. 1397.83

Flooring over 20mm (average) base of cement mortar

1:6 (1 Cement: 6 Coarse sand)on new surface or fixing

on existing flooring by adhesive material including

dismentalling of existing flooring and jointed with

colour cement slurry including finished with flush

pointing & cleaning the surface etc.Complete for flooring

19 Providing and laying Vitrified tiles 8 to 10 mm thick , 18.00 Sq.mt. 1141.45

24'' x 24'' in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

20 Providing and laying white glazed tiles 6mm thick in 12.60 Sq.Mt. 917.25

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

21 Providing and laying Vitrified tiles 8 to 10 mm thick , 137.70 Sq.Mt. 1073.13

in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

22 Providing and laying ordinary cement concrete M200 37.89 Cu.mt. 6888.15

and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement of R.C.C. work in (iii) Slab having more

than 10cm and up to 13cm thickness

23 Providing T.M.T. Fe-500 bar reinforcement for R.C.C. 19989.00 Kg. 76.21

work including bending, binding and placing in position

complete up to floor two level

24 Providing and fixing M.S. Grills of required pattern to 3504.60 Kg 104.04

wooden frames of window etc. with M.S. Plate at

required spacing & frame around, squre or rouhnd bar

with rounded headed bolts & nuts or by screws, coated

with necessary red oxide and three coats of oil paint of

shaded approved by engineer in charged (A) Plain grill

25 Wall painting with plastic emulsion paint of approved 1890.00 Sq.mt. 323.20

brand and manufacture after application of two coats of

Birla or Equivalent brand putty, and a coat of primer of

approved brand and after rubbing the surface and

making the surface levelled by application of lappy, on

undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

26 Finishing wall with Asian Paint Apex or Equivalent (two 1574.10 Sq.mt. 252.50

coats) after application of Exterior Wall primer of

approved brand on wall surface to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete

27 Providing And laying broken china mosaic flooring for 333.00 Sq.mt. 505.00

terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar out upto surface

using white cement including rounding off junctions and

extending them upto 30 cm along the wall in smooth

Curves, clearing with water or oxalic acid etc. over the

brickbat water proofing with water proofing chemical

carried out as directed by Engineer In-charged.

28 Providing and fixing PVC Rain water spout of 50mm dia 54.00 No 101.00

and 60cm length

29 Constructing septic tank of 2.00 mt. x 1.50 mt. x 1.20 9.00 No 15777.21

mt. size with necessary out side wall and two partition

walls of brick masonary making two parts of the tank,

plastering tha walls in cement mortar 1:4 making all

connection of pipe line and covering of the top with

R.C.C. slab of cement concrete 1:2:4 with necessary

reinforcement etc. complete and providing necessary

earth work on it as directed.

30 Providing sock pit of 5.0Cu.M. volume including 9.00 No 12120.00

excavating sand filling brick bats with dry masonry work

at top for 5cm height including covering the top with

stone including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

31 Construction of cooking platform 60 cm wide of 18 mm 10.80 Sq.Mt. 12625.00

thich Granite Top and bottom support of 25-30mm thick

kota stone (sandwich type) with brick masonary support

incluing the approved quality steel sink in the size of

600x400x150 mm including faucetss, fixing the sink in

the stone platform with base pipe and fixtures and kota

stone shelves as per the Drawing and design etc.

32 Providing and laying (two level or slopes) and jointing 45.00 Rmt 305.13

with stiff mixture of cement mortar in proportion 1:1

PVC pipes following nominal internal diameters

including testing of pipes and joints complete (B)

33 Providing and laying (two level or slopes) and jointing 45.00 Rmt 216.36

with stiff mixture of cement mortar in proportion 1:1

PVC following nominal internal diameters including

testing of pipes and joints complete (A) 100mm dia

34 Providing and fixing S.W. gully trap with C.I. Grating 9.00 No. 1292.19

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight (i) Square mouth traps (C) 150mm x 100mm size

35 Providing and fixing cast iron (spun) Nahni trap of the 18.00 No. 606.08

following nominal diameter of self cleaning design with

C.I. Screwed down of hinged grating including cost of

cutting and making good the walls and floors 100mm

inlet and 50mm outlet

36 Providing and fixing wash down water closet (indian 9.00 No. 1562.37

type or baby European type W.C. Pan) with intiegral P

or S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 fine sand) including

fixing plastic seat & cover for wash down water closer

with C.P. brass hinges & rubber buffer including jet

wash facilities (A) vitreous china pattern (i) white color

37 Providing and fixing wash basin with single hole for 9.00 No. 1870.16

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

including fixing C.P brass waste and M.I fisher union for

washbasin or sink including fixing chromium plated

bottle trap with necessary couplings. ( A ) 32 mm. dia. (

A ) Vitreous China , (ii) Flat Back washbasin 550 mm.

x 400 mm. size. ( i ) In white colour,

38 Providing laying and jointing in true line and level 180.00 Rmt 91.84

25mm dia. U.P.V.C./P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

39 Providing laying and jointing in true line and level 180.00 Rmt 72.65

15mm dia. U.P.V.C./P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

40 Providing and fixing in position cowel vent to pipes (1) 9.00 No. 389.74

41 Providing and fixing gun metal check or non return full 9.00 No. 420.63

way wheel valve (C) 25mm dia

42 Providing and fixing gun metal check or non return full 9.00 No. 203.82

way wheel valve (A) 15mm dia

43 Providing and fixing screw down bib taps of following 36.00 No. 186.83

size (B) Brass Chromium plated screw down bib tap (i)

44 Providing and fixing ball cock of approved quality as 9.00 No. 132.89

directed (A) Copper metal (i) 25mm dia

45 Providing, erecting & fixing double coated Syntex or 4500.00 Litres 3.95

equivalent PVC (ISI) water tank of required capacity

each with all necessary fittings & conection etc.

completed on tarrace.

46 Providing of Bala Work for Anganwadi Like Wall 9.00 Job 10100.00

paintings, Measurements, Wall arts, Black board, Days-

Months, Drawings of Animal, birds, Vegetables,

Nutrition chart,as per Annexure (A) Etc complete as per

Directed by Engineer in charged.

47 Providing, erecting & fixing Fibre / Metal fabricated 9.00 Nos. 12120.00

make childern Slide fit for children of age group coming

to anganwadi and approved by Engineer in charged, in

the playground of approved brand and quality at the site

as directed by the engineer in charge.

48 Providing, erecting & fixing Fibre / Metal fabricated 9.00 Nos. 12120.00

make childern Swing for children age group coming to

anganwadi and approved by Engineer in charged, in the

playground of approved brand and quality at the site as

directed by the engineer in charge.

49 Providing Cello/Nikamal two Seat polypropelene Plastic 54.00 Nos 3030.00

Junior Well finished Study/Play Table for Kids from 3-

10 Years (Attractive colours like RED/Yellow/Green)

with all necessary charges and taxes as Directed by the

Engineer in charged.

50 Providing and Fixing 42" Smart LED Full HD TV with 9.00 Nos 35350.00

one year warranty of approved brand like Samsung, LG,

Sony,Croma or Equivalent with all necessary accessory

like wall mount stand, remote and cabling and fixtures

with USB Empty pendrive of 64GB of approved Brand

as directed by the engineer in charged.

Rupees EightySeven Lakh SeventyFour Thousand Six Hundred Paise TwentyEight Only

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen

in figures And words) of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 87,74,600.28 Estimated Amount Put to tender.87,74,600.28

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Bidder

Deputy Executive Engineer Divisional Accountant

Panchayat ( R&B) Sub Division Panchayat ( R&B) Division

Dharampur Valsad

Executive Engineer

Panchayat ( R&B) Division

SHEDULE B Page