Capital maintenance including overhauling and change of transformer oil for longevity of 1Nos 31.5 MVA, 132,11 KV Power Transformer CGL Make at 181.5MVA, 132,33,11KV Grid Station Bari Brahmana I.

Amount

MATERIAL AND LABOUR CHARGES REQUIRED FOR INTERNAL INSPECTION & MINOR REPAIRS OF 31.50 MVA,132/33KV CGL MAKE TRANSFORMER

Design, Engineering. Manufacture,workshop testing, supply including packing and forwarded, transportation, delivery at site storage charges of;Main Equipment

HV terminal (145 KV,800 Amp)

LV terminal

HV Neutarl Bushing

LV Neutral Bushing

TJB and M.Box ground mounted

Breathers for transformer

Cooling Fans

COPS Conservator

External Paint

Internal oil resistant paint

Gasket

Set of gaskets(Nitrile+cork)

Set of Valves

Fresh Transformer Oil

Erection charges for supply of material for 132/33 KV 31.50 MVA, CGL MAKE TRANSFORMER

HV terminal (145 KV,800 Amp)

LV terminal

HV Neutarl Bushing

LV Neutral Bushing

TJB and M.Box ground mounted

Breathers for transformer

Cooling Fans

COPS Conservator

External Paint

Internal oil resistant paint

Gasket

Set of gaskets(Nitrile+cork)

Set of Valves

Set of hardware

Crepe Paper

Press Board

Labour Cost for the repair and overhauling of 31.50 MVA 132/33 KV , Power Transformer

Erection of temporary shed for dehydration of Transformer

Draining of complete oil i.e 17300 L from the Transformer for carrying out Internal inspectiont and for replacement of all the gaskets of Transformer and filling of transformer with Nitrogen gas with a pressure of 0.4kgs per sq cm

Dismantling of transformer Accessiories such as Bushings, bushing turrets, Pipe lines, Inspection covers, OLTC chamber covers, Radiator plugs for replacement of worn out gaskets with new one

Filteration/Dehydration of Transformer oil and step by step filling into the transformer

Erection of all Transformer Accessories such as Bushings, bushing turrets, Pipe lines, Inspection covers, OLTC chamber covers, Radiator plugs after replacement of worn out gaskets with new one and replacement of buccholz relay,PRV,Magnetic oil level gauge ,Prismatic oil level gauge,Temperature indicators(WTI & OTI) ,cooling fans,relay and contactor,etc

Misc. Works such as dismantling of jumpers/connectors and reconnection of same after carrying out job, testing of transformer, carriage/transportation of Filteration Plant, oil storage tanks their loading and unloading at site(L/S)

Repairing or Overhauling of motor in Driving Mechanism of OLTC

Making RTCC Panel functional,checking cables,remote temperature indicators(WTI,OTI) in RTCC panel.Checking Local and remote operation along with AVR relay & other allied works

Checking reparing and making functional auto control operation of cooling fan by way replacement of Main Switch, Contactors, Relay and placing new wiring in the existing old/ replaced fan control cubical

Final Erection Check and conducting various pre-commissioning tests on the Transformer including dissolved gas analysis, BDV of oil, PPM,C & tan delta of oil , Bushings and Windings, interfacial tension, sludge, ratio test, short circuit test, winding resistance ,insulation resistance etc for successful commissioning of transformer after repais/overhauling of the transformer

Set of hardware

Crepe Paper

Press Board