REPAIR TO ROAD SIDE BERMS, FURNITURE AND KERB STONE ALONG RO ROUTE IN SOUTH COMPLEX AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M & L for rendering 15 mm thick on brick or concrete surface in CM (1:4), mixed with WPC @ 3% by weight of cement or as per manufacturers instructions, surfaces finish even and smooth without using extra cement complete all as specified and directed. ( Note :- WPC shall be measured and paid separately)

M & L for rendering 15 mm thick in CM (1:6) using coarse sand on brick or concrete surface finished fair & even complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

M & L for PCC 1;4;8 type D-2, using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M & L for rubberized polished chequered cement concrete coloured tiles of size 30 cm X 30 cm X 20 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M & L for rubberized polished precast coloured concrete Interlocking paver block any shape, size with grey cement & pigment colour confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete all as specified and directed.

M & L for rubberized polished precast coloured concrete Interlocking paver block any shape, size & with grey cement & no pigment colour confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make: Jain/NTC/ultra

M & L for rubberized polished precast coloured concrete Interlocking paver block any shape, size & with grey cement & pigment colour confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

M & L for rubberized polished precast coloured concrete Interlocking paver block any shape, size & with grey cement & no pigment colour confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete all as specified and directed.

M & L for precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in CM 1:4 including demolition of existing old RCC slabs of any description complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective item )

M & L for mild steel TMT bars 8mm dia bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S & F factory made precast cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone agg solid blocks size 300x450x150mm as in kerb stone set and jointed in CM 1:4 incl excavation and earth work, removal etc including demolition/dismantling of cement concrete/concrete blocks/kerb stones etc of any description complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc including demolition of existing cement concrete complete all as specified and directed.

M & L for preparation of new or previously untreated concrete/plastered surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of any colour over a coat of primer complete all as specified and directed.

M & L for preparation of old painted concrete/plastered surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour as in kerb stone etc complete all as specified and directed.

M & L for preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

M&L for complete removal of old painted surfaces of external wall with scrapping, wire brushing, washing with water, preparation of old plastered surfaces of external wall (up to triple storey of bldg) and two coat of 1st quality exterior emulsion weather coat paint over a coat of alkali resistant priming coat complete all as specified and directed.(Note :- Preparation should be done by mechanical hand held grinder and the work will be carried out up to triple storey building, the rate of scaffolding is included for this item also)

M & L for preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of 1st quality exterior emulsion weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed.

S&F Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm height 20mm with fixing with epoxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10hours including removal of old unserviceable stud complete all as specified and directed..

S&F cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud.

S&F high intensity grade shedding retro reflective delineator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work, including taken out of old unserviceable delineator complete all as specified and directed.

Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.

Aggrawal Builders and Furnishers

Meher enterprises

M/S RAJESH KUMAR GOYAL

M/S Anil kumar

Bhanu Prakash

M/s Ram Chander Gupta

M R Taders