REPAIRING and RENOVATION OF DRONE RPTO CENTRE IN COLLEGE OF RENEWABLE ENERGY AND ENVIRONMENTAL ENGINEERING AT SDAU S.K.NAGAR

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff 11.00 121.72 CMT

upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mm nominal size) and

2 curing complete excluding cost of formwork in (A) Foundation and 5.00 2627.15 CMT

Demolition of Brick work and stone masonry including stacking of

3 serviceable materilas and disposal of unserviceable materials with all 1.00 557.32 CMT

lead and lift.(ii) In Cement Mortar.

Labour Charge For Dismentaling powder coated aluminium partition

4 frame size of 47mm x44mm fixing with wall in charge 29.00 620.00 SMT

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

5 floor two level and finished even and smooth in (ii) Cement mortar 72.00 163.39 SMT

1:4 (1-cement :4-sand) (a)Ground floor

Providing & fixing granite stone average 18 mm thick machine-cut &

machined polished stone in treads of steps, sill, copings, parapet top,

window sill, planter top, and such other locations, laid on

mm(average) thick cement mortar 1:4 (1 cement:4coarse sand) and

jointed with Super flex guranted fixing solution by kerakoll mixed

6 with pigment to match the shades of the slabs, including rubbing and 25.00 4008.00 SMT

polishing complete. The Stone used should be in one single long

piece up to 3000 mm as per drawing or as directed by Engineer-in-

charge. The exposed projected edges shall be of uniform thickness

and of uniform projection including molding , chamfering, rounding,

polishing complete.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

7 Cement Mortar 1:5. (1- Cement : 5 -fine 11.00 4203.06 CMT

sand) (B) Conventional

P/F Powder coated aluminum partition frame size of 47mm x 44mm

x 1mm fixing with wall/ floor top of 4mm thick glass standard

quality and bottle 9mm thick partition board Fixing with rubber

8 gasket and aluminum bedding of 19mm x 11mm as per given detail 3.00 3600.00 SMT

drainage and design etc. complete as directed by engineer in

Providing & fixing partly paneled partly glazed door of size section

9 frame of 1.00 kg/Rmtweight with 5mm fastening . 4.00 4800.00 SMT

Description of Item Qty. Rate Per Amount

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

dirt and Painting two coats (excluding priming coat) on new steel and

10 other metal surface with enamel paint, brushing, interior to give an 33.00 126.86 SMT

even shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

providing & applying three coats (first coat with water base primer,

second cote acrylic paint with brush and final coat with brush and

roller) of external100% acrylic paint "apex ultima" from Asian paint

or equivalent approved with brush on exterior surfaces at all heights

& all places including scaffolding to give even shades including

11 thoroughly brushing the surfaces free from mortar dropping and 433.00 140.00 SMT

other foreign matter and sand papered smooth etc complete as per

the manufacture's specification & to the satisfaction of engineer in

charge or architect. ( newly plastered surfaces shall require three

coats - first coat with 100% dilution & two coats with 40% dilution or

as specified by paint manufacturer).

Filling in plinth with sand under floors including watering ramming,

12 consolidating and dressing complete 15.00 440.35 CMT

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured

/Spintone / Cosmos having NRC value of 0.5 & Globe having NRC

13 value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on 61.00 1657.57 SMT

true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at joints to

get required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre.

Total Rs.

I we am/are agree carried out and complete the above work at……………………. (in

words……………………………………….Percentage) below/above rates mentioned schedule-B.

Contractor Signature Executive Engineer