Construction of hall for Directors Residence C10 including electrical installation work at North Campus of IIT Mandi

Amount

Civil Work Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. Hard rock (blasting prohibited) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. Note: Contractor has to got design mix done from approved lab/as decided by IIT Mandi. Extra cost of cement after minimum cement content 330 kg/ cum as per design mix if any shall be borne by the contractor.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Edges of slabs and breaks in floors and walls Under 20 cm wide as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures inrecommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. Note: Contractor has to got design mix done from approved lab/as decided by IIT Mandi. Extra cost of cement after minimum cement content 330 kg/ cum as per design mix if any shall be borne by the contractor.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3 mm section at not less than 3 ties per sqm as per approved design as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorptions? 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardent property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and laying in position plum concrete with hard stones bolders in Retaining wall etc. up to all heights and level, size and shape, etc with cement concrete with mix (1:2:4) 1 cement, 2 coarse sand,4graded stone aggregate 20mm nominal size using maximum 40% hard stone boulders in plum concrete as per direction and entire satisfaction of Engineer-in-charge.(excluding the cost of centering and shuttering.) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing on wall face 110 mm diameter unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, for weep hole in retaining wall and toe wall etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 25 mm thick as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

20 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

6 mm cement plaster of mix: 1:3 (1 cement: 3 fine sand) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size, Second class teak wood as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red, Area of slab up to 0.50 sqm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing fly proof wire gauze to windows, clerestory upvc windows & doors with necessary arrangement/fitting complete with Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing double glazed hermetically sealed glazing in upvc windows, ventilators and partition etc. including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. (a) with Hermetically sealed double glass unit comprising of 6MM CLEAR HS + 12 mm Air Gap + 6MM clear toughened glass (SHGC<0.31, Maximum U- value of assembly not more than 3.3 W/m2- degree K, Visible Light transmittance (VLT) not less than 39%, Air-leakage not more than 2 L/s.m2 light reflection external 10 to 25 %, Light reflection internal 10 to 15%). Neutral glass double silvered shall be used and Glass sample to be approved by the Engineer-in-charge as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

W0ODEN LAMINATED FLOORING Providing and fixing 8mm thick laminated flooring panels of grade AC-4 Class32 - General Commercial/ Heavy Residential with surface finish EIR-Embossed in Registered/Special Synchronized Surface, overlay Highly Resistant Surface impregnated with Melamine resins and Aluminum Oxide. The panels are of High Density Fiver Board of E 1 Standard with Melamine Impregnated Decorative Film o top and Balance Paper (Melamine Impregnated Paper) on the other side of panel. The panels having tongue and groove for laying. The wooden laminated flooring placed of 2mm thick| hard foam and polythene including skirting/beading wherever required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing of Pine Wood premium grade panels of width 5" including tongue having tongue and groove on each panel and beveled edge. The panels fitted on 12 mm thick ISI marked compressed BWR ply duly screwed to wall. All panels duly polished in lacquer finish with top molding, skirting/beading wherever required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing grey slate tile/ garsa tile of thickness not less than 8mm of approved sizes and with visible rough finish for wall cladding at all levels with keeping the joint of 10mm in between two tiles on 15mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including jointing with cement slurry @3.30kg/sqm, pointing the joints with cement mortar 1:2 (1 cement : 2 sand) with matching pigment Including necessary scaffolding, tools, tackles, curing, cleaning etc. complete as per direction of Engineer-in-charge as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having two casement panel, fixed central panel and top fixed/openabale panels and with S.S friction hinges (400 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window more than 1.5 sqm upto 3 sqm) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing factory made uPVC white colour casement wire guage windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement wire guage window double panel with S.S. friction hinges (300 x 19 x 1.9 mm) made of (big series) frame 62 x 112 mm & sash 84 x 42 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 2.70sqm.) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having two casement panels and top panel top hung and with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window more than 0.75 sqm) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing floor stopper of half dome of 45mm dia with fixing accessories, in satin stainless steel in SS 304, including all fittings and fixtures. All complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing 6mm thick fire rated glass for vision panel in doors including all fittings and fixtures as per approved architectural drawings and complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing ball bearing hinges having 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin stainless steel including all fittings and fixtures The door hinges shall be suitable for door weights upto 120 kgs.All complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing mortise sash lock with Pair of design Lever Handle on Roses & escutcheons. Including 281 Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length with internal thumb turn & external key operation in satin stainless steel finish including all fittings and fixtures All complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing pull handle of back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised beveling on the outer surface. Length =150mm,19mm dia, of steel grade-SS304 including all fittings and fixtures .All complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Electrical item Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit / Casing Caping, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required Group B, as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Wiring for circuit/ submain wiring along with earth wire with the 2 x 2.5 Sq. mm. + 1 x 2.5 Sq. mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/ Casing Caping as required of Make :- KEI, Havells, RR as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Wiring for circuit/ submain wiring along with earth wire with the 2 x 4 Sq. mm. + 1 x 4 Sq. mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit / Casing Caping as required of Make :- KEI, Havells, RR as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Wiring for circuit/ submain wiring along with earth wire with the 2 x 6 Sq. mm. + 1 x 6 Sq. mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit / Casing Caping as required of Make :- KEI, Havells, RR as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing stepped type electronic fan regulator 2 Modular on the existing modular plate switch box including connections but excluding modular plate etc. as required of Make :- Havells Crabtree Athena, North West, L&T as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 5/6 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredof Make :- Havells Crabtree Athena, North West, L&T as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 15/16 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredof Make :- Havells Crabtree Athena, North West, L&T as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 3 pin 5/6 A socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredof Make :- Havells Crabtree Athena, North West, L&T as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 6 pin 15/16 A socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredof Make :- Havells Crabtree Athena, North West, L&T as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 3 Module (100mmX75mm) size/ modules, GI / PVC box alongwith modular base & cover plate for modular switches in recess etc as requiredof Make :- Havells Crabtree Athena, North West, L&T as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 8 way (4 + 24), Double door, Double door, Double door TPN DB horizontal type prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.(excluding MCB/RCCB) of Make :- Havells , L&T, Legrand as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of Single pole, in the existing MCB DB complete with connections, testing and commissioning etc. as required of Make :- Havells , L&T, Legrand as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 63 Amp rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required of make Havells , L&T, Schinder as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) on wall surface as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 70 sq. mm (38mm) size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and making end termination with brass compression gland and copper lugs for 4 X 16 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying 4 core 16 Sq. mm XLPE insulated armoured copper cable as per IS7098 (Part 1) 1988 as required of Make :- KEI, Havells, Gloster as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and drawing 3.5 core 70 Sq. mm XLPE insulated armoured aluminium cable as per IS7098 (Part 1)1988 of Make :- KEI, Havells, Polycab as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 63 amps rating, four pole, 415 volts,MCB in the existing TPN Box complete with connections, testing and commissioning etc. as required as per entire of Make:- Havells, Schneider, L&T satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing 25 A, MCB DBOXXMCB procted Socket (With Sheet Steel Enclosure) plug top, on surface or in recess, for the socket out let and complete with connections, testing and commissioning etc. as required of Make :- Havells , L&T, Legrand as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying, installation, testing and commissioning of pre-wired 18/20 W (CT up to 6500k) LED Light Fixture, complete with all accessories anddirectly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required of Make :- Havells , Wipro, Syska as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying, installation, testing and commissioning of pre-wired 18/20 W Round Surface / recess panel light (CT up to 6000k) LED Light Fixture, complete with all accessories directly on ceiling, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required of Make :- Havells , Wipro, Syska as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying of ceiling fan of 1200 mm Sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required of Make :- Havells , Usha, Crompton as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Mansih Kapoor

Chopra Aluminium