Construction of R.I. Office cum Residence Building at Bakdabeda in Jharigam Block of Nabarangpur District for the year 2025-26

Earth work in excavation of foundation in hard soil with all lead & lift including dressing & levelling the bed of the foundation to the required width & depth & stacking the excavated materials away from the working areas as per the direction of E.I.C.

Providing and filling clean dry sand of approved quality from approved quarry in foundation and plinth in 9" thick layer well watered and rammed incl. cost,conveyance, royalties and taxes of all materials etc.

C.C.(1:3:6) using 40mm HG metal of approved quality from approved quarry incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials,cost of labour and T&p etc. all complete as per the direction of E.I.C..

Flyash brick masonry in C.M. (1:6) using brick of size 23cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours befour use incl.lowering, placing in position, watering and curing and cost, conveyance, royalties and taxes of all materials, cost of labour & T&P etc. complete as per the direction of E.I.C..(For foundation & plinth). etc all complete.

Brick work with Fly Ash Bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance +/- 8 percent in cement mortar (1:6) in Superstructure etc. complete as per specification and direction of the Engineer-in-Charge.

In Superstructure

1ST floor

2 nd Floor

C.C.(1:2:4 ) using 12mm HGCB chips of approved quality from approved quarry incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C..

R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C..

Column Base & Footing

Column up to Plinth beam level

Plinth Band

Column & Beam

Ground Floor ( G F )

1 st Floor

2 nd Floor

Lintel Band

Ground Floor ( G F )

1ST floor

Chajja

Ground Floor ( G F )

1ST floor

Roof Slab

Ground Floor ( G F )

1ST floor

For Stair case

Ground Floor ( G F )

1ST floor

Cutting, straightening, coiled or bent up T. S. rod for R.C.C. work incl. bending, binding & tying the grills and placing in proper position with cost, conveyance,taxes of binding wire 18 to 20 gauge and T.S. rod, cost of all labour & T&P etc complete as per the direction of E.I.C.

Ground Floor ( G F )

1ST floor

Supplying, fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including cost, conveyane, royalty and taxes of all materials, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge.

Ground Floor ( G F )

1ST floor

Labour for fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including making holes in walls in proper position including making holes in walls RCC structure and wood work etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2" to 3/4") (20mm not to exceed 25% ) with cost, conveyane, royalty and taxes of all materials, labour, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge.

Ground Floor ( G F )

1ST floor

16mm thick cement plaster (1:6),finished smooth to stone work after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C.( A/R P/105 item 14 ).

Ground Floor ( G F )

1ST floor

Providing 6 mm thick C.P. in C.M.(1:4) to R.C.C surface finished smooth including closed deep chiping with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Ground Floor ( G F )

1ST floor

12mm thick cement plaster (1:6) for brick work after racking out joints incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C..

Ground Floor ( G F )

1ST floor

20mm thick grading plaster (1:4),finished smooth over roof slab after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C..

Ground Floor ( G F )

1ST floor

Fixing vetrieied tiles in floors of size 600 mm x 600 mm on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete.

Ground Floor ( G F )

1ST floor

Fixing vetrified tiles in Dados on 12 mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete.

Ground Floor ( G F )

1ST floor

Finishing wall surface with acrylic wall putty water based of approved make and finished smooth and even surface to receive painting incl. cost of all material, labour and T&P etc. complete.

Ground Floor ( G F )

1ST floor

Priming one coat with any approved primer over plastered surface as per direction of the Engineer-in-charge.

Ground Floor ( G F )

1ST floor

Wall painting 2 coats with plastic emulsion paint over a coat of primer of approved shade on new work to give an even shade.

Ground Floor ( G F )

1ST floor

Finishing walls with weather seal coat of approved shade on new work two coats to give an even shade including cost of paint.

Ground Floor ( G F )

1ST floor

Painting two coats of enamel paint to new wood work and iron work including cost of paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Ground Floor ( G F )

1ST floor

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick cicrular pipe with balustrade of size 32 mm x32mm x2 mm @ 0.90mtr . C/C an stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in staircase as per aproved design and specification, buffing, polishing etc, with cost ,conveyance, taxes of all materials ,labour T & P etc required for the complete in all respect .

Ground Floor ( G F )

1ST floor

Fixing chequered tiles in floors on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete.

Ground Floor ( G F )

Providing and fixing rain water pipes with necessary bend shoes and heads including cost of 75 mm dia PVC pipe clams and nails etc. with all cost,conveyance,taxes of all the materials required for the work with all labour,T&P and cess etc.complete in all respect as per specification and direction of the Engineer-in-charge.

1ST floor

Providing & laying of 80 mm thick factory made cement concrete interlocking paver block of M-30 grade and approved make,varity colour and size made by Block making machine with strong vibratory compaction of approved design and shape laid in required colour and pattern over 50mm thick compacted bed of course sand filling the joints with fine sand etc. all complete including cost, conveyance,royality,taxes of all materials,labour,T&P etc as per direction of Engineer-in-charge

Supplying fitting and fixing of MS Angles or Round bars in roof trush etc complete as per direction of Engineer in charge.

Supplying and fixing of GCI Sheet (0.40mm thick ) in roof in roof drilling holes in windties including fixing of ridges valleys windties etc. including cost of fitting.

Providing fitting, fixing of Al. door with OELanodized Al. door section of 9202 as verticla member, 9201 as top meber and 9200 as bottom and middle member and 12 mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete.

Supplying all materials,labour,T&P and providing Brick work with K.B.Brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8% in cm(1:4)including watering,curring, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of E.I.C.

-do- Group A

0mm top). The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts (20 mm dia 700mm Length) to be mounted on concrete Foundation (1'X1'X4' high) usng HYSD steel reinforced for errection of Pole firmly with junction box, DP MCB & coil earthing as per direction of Engineer in Charge

-do- Group B

Recessed wiring to Fan Point in...

0mm top). The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts (20 mm dia 700mm Length) to be mounted on concrete Foundation (1'X1'X4' high) usng HYSD steel reinforced for errection of Pole firmly with junction box, DP MCB & coil earthing as per direction of Engineer in Charge

Recessed wiring to Call Bell Point in...

0mm top). The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts (20 mm dia 700mm Length) to be mounted on concrete Foundation (1'X1'X4' high) usng HYSD steel reinforced for errection of Pole firmly with junction box, DP MCB & coil earthing as per direction of Engineer in Charge

Recessed wiring to Exhaust Fan Point in…..

0mm top). The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts (20 mm dia 700mm Length) to be mounted on concrete Foundation (1'X1'X4' high) usng HYSD steel reinforced for errection of Pole firmly with junction box, DP MCB & coil earthing as per direction of Engineer in Charge

S/F of Angle holder replacing Ceilling Rose

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

Switch Boards

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection.

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.

2 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers & BDB

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 waydouble door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of MCB 8 way Single door (2.3.2)

Main switches

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Earthing

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Fittings

Providing & fixing plain 16/0.2mm twin twisted flexible, FRLS PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

Fixing /I.T.C. of stepped type Modular regulator (1.25a)

S/F of 20mm dia down rod with all accessories (1.39+1.41)

Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )

S/F of 20-25 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 12w Watt LED Bulb

S/F of 1650VA/12V Inverter with 1 no 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous

Provision of 40mm dia HDPE pipe for laying & protection of cable

Cables

S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire

Provision of Armoured cable size 2x6sqmm (15)

Laying of MV cable upto 25sqmm in ground (5.1.1)

Laying of MV cable upto 25sqmm on surface (5.5.1)

Area lightings

Supply & Instalation of 6 meter HDG octagonal Pole shall be designed to withstand the maximum wind speed as per IS 875.(Top 70 mm & Bottom 130mm of 3 mm thick) The poles shall with average coating thickness of 70 micron. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding (MAKE-Bajaj/Utkarsh )with single arm detachable 1.5 Mtr Bracket (suitable for 7

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

20mm dia CPVC Pipe

P.H. Part

1st depth-

32mm dia cpvc pipe

Earthwork in all kinds of soil with in 50mtr initial lead & 1.50mtr initial lift including rough dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.30mtr in depth & as per the direction of E.I.C.

Supplying allmaterials,labour,T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C.

Supplying all materials,labour T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C.

2nd depth-

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all labour,T&P and providing 50mm thick precast RCC bafflewalls in cc(1:1.5:3)with 12mm size bhg chips fitted&fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling then after casting including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing MS reinforcement for RCC work including cutting, bending,binding and tying the grills and placing the position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site payment of royalty,taxes etc all complete as per direction of E.I.C.

In Foundation and Plinth in CM(1:4)

Supplying all materials,labour,T&P and providing RCC(1:1.5:3)with 12mm size bhg chips for RCC works including hoisting,laying,watering,curring,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3) with punning on brick work including watering,curing,conveyance of all material to worksite,payment of royalty,taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast M.H cover in cc(1:1.5:3)using 12mm size hbg chips,placing the cover on the MH/S.tank & finishing smooth etc all complete including watering,curing,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Filling in F&P with excavated materials including watering and ramming as per the direction of E.I.C.

Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floor,tread and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tile including rubbing and polishing complete as per the specification & direction of E.I.C.

12 mm thick CP in CM(1:3)

110mm dia PVC pipe

160mm dia PVC pipe

110mm dia PVC'P' trap

110mm dia.PVC S/J/D

110mm dia.PVC Door Bend

110mm dia PVC Plain Bend

110mm dia PVC Tee

75mm dia. PVC pipe

75mm dia. PVC Plain Bend

110mm dia PVC SWR Nanhi trap without jally

110mm dia PVC offset

110mm dia PVC Cowl

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/kodappa tiles on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of E.I.C.

125mm dia CP greatings

250mm thick wall

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Parry ware/ Hind ware/cera/Equivalent)

E.W.C with integral 'S' or 'P' trap

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages etc.all complete as per the P.H. specification and direction of E.I.C.

Seat cover for E.W.C

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C.

580mm Orissa Pan(White)

550mmx400mmsizeWHB

Supplying all materials,labour,T&P for fixings water closet,squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cerao/Equivalent)

Fixing of Pedestrial for W.H.B

Inside size 760mmx760mmx460mm

Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C. (Parry ware/Hind ware/cera/Equivalent)

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.

110mm dia PVC pipe with allround encasing

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6),moulding&shapping the channel inside & benching with cc(1:1.5:3)using 12mm size HG chip,12mm thick cp(1:3) with punning to inside,cement flush pointing(1:3) to outside,RCC coverslab in cc(1;1.5:3)using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C.

160mm dia PVC pipe with allround encasing

1.20mx 2.00m deep inside size

1.00mx 2.00m deep inside size

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Roof cutting

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs,etc. upto 19cm thick for passing GI/PVC pipes and fitting etc and repairing the holes after insertion of pipes etc with cc(1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(Jaquar Or Equivalent))

15mm dia C.P Bib Cock(L.B)

15mm dia C.P Bib cock(S.B)

15mm dia C.P Two Way Bib cock

15mm dia C.P Health Fuccet

15mm dia CP wall mixture[3-in-1]

15mm dia C.P Pillar cock

15mm dia Angle Stop Cock

15mm dia Concealed Stop Cock

15mm dia. C.P flange

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches (to level or slope) and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design,specification and direction of E.I.C.

25mm dia F.W.V

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork gravel packing in the rear of well steining,RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron w

10 lit PVC L/L Cistern (Parry ware/Hind ware/cera/Equivalent)

Glass shelf with C.P. bracket with guard rails

Mirror with rectangular shape 450x600mm

ork,watering,curing,conveyance of all materials to worksite,payment of royalty, taxes etc.all complete as per approved drawing,specification and direction of E.I.C.

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

20mmx450mm long CP towel rail

CP towel ring

CP liquid soap holder

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC LL flushing cistern with a pair of C.I/M.S.brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/ PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet, overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.

Fixing Of Toilet Paper Holder

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick AC. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.

450mmx400mmx150mm size

15mmx100mm`dia CP shower

Sinking of 200 mmx150mm dia Tube well by fast drilling Sofasticated Rig. ( ODEX BORE)

Supplying all labour and drilling a perfectly vertical bore hole in boulder formation areas with down the hole hammer drilling rigs or combination drilling rigs to suit the site condition with deployment of rig with necessary accessories and consumables for a specified depth below ground level including supply of necessary casing shoes, odex tools and plants, jointing materials, welding extra socket where required, withdrawing pipes, lowering the MS ERW pipes and fitting fixing in perfectly vertical position including cutting, welding for jointing the pipes for simultaneous casing lowering in over burden boulder formation till encounter of hard rock & to drill 125 mm DTH of the desired depth as may be necessary cleaning the site & washing the bore etc. all complete providing sanitary sealing up to 5mtrs depth below ground as per specification & direction of the Engineer- in- Charge.

Drilling of 200mm dia. Bore-0.00mtr to 50.00mtr By ODEX

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.

Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)

Lowering of 200 mm dia GI/ERW pipes:00.00 mtr to 50.00mtr

Cost of 200 mm dia GI pipes:-00.00mtr to 50.00mtr

Cleaning and developing the tubewell with their own compressor contineously worked till clean and adiquate discharge is obtained from the tube well including supply of & use of all necessary equipments and labour as per the direction of E.I.C.

Sinking of 200 mmx150mm dia Tube well by fast drilling Sofasticated Rig. ( ODEX BORE)

Sinking of 125 mmx100mm dia Tube well by fast drilling Sofasticated Rig. ( ODEX BORE)

Drilling of 125mm dia. Bore-0.00mtr to 50.00mtr By ODEX

Drilling of 150mm dia. Bore-50.00mtr to 80.00mtr By DTH

Drilling of 100mm dia. Bore-50.00mtr to 80.00mtr By DTH

Lowering of 125mm dia GI pipes:00.00 mtr to 50.00mtr

Cost of 200 mm dia GI pipes:-00.00mtr to 50.00mtr

Cost of 125 mm dia GI/ ERW pipes:-00.00mtr to 50.00mtr

(Hand Pump )

Supplying, all materials, labour, T&P and providing and fixing ISI marked Deep Well Hand Pump Standard HWDP conforming to IS-15500/04 Part-II complete with accessories alongwith 8 nos of connecting rod made of bright bar electro galvanized of 12mm dia of 3 mtr long with coupler and fitted with stand assembly including fitting and fixing and lowering of Hand Pump set at the Tube well with necessary length of riser pipes including carriage and conveyance of all materials and T&P etc all complete as direction of E.I.C.

Supplying all materials labour, T & P and construction tubewell platform as per UNICEF design with drain and specification with c:c (1:2:4) using 12mm size C.B H.G chips embedding pedestil base concrete of 76x76x40cm size 1.0mx1.0m inciuding earthwork in all kinds of soil centering and shuttring laying concrete plestering and punning watering and curing finished smoothincluding cist conveyancy of all materials to work site paymentof royalty taxes etc all complete as per approved specification and direction of the E.I.C.

Supplying all labour T&P materials for construction of drain as per UNICEF design etc all complete as per the direction of EIC.

1.00H.P.Single Phase Submersible Pump Set

Supplying of I.S.I.Mark 1.00H.P.Single Phase Verical Submersible Pump Set with discharge of 1800-2200 ltr./hour and a head of 45-60mtr of reputed make like KSB/Texmo & equivalent including all cost, conveyance and taxes etc all complete as per direction of E-I-C.

Supplying all labour,T&P and fitting and fixing of 1.00H.P Single phase vetrical Submersible Pump Set with commissioning and testing etc.all complete as per direction of E.I.C.

Supplying and fitting and fixing of I.S.I.mark D.O.L Starter of reputed make like BCH or equivalent for 1.00H.P Single Phase Submersible Pump inclu

ding all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of three core flat cable(1.5mm2) of I.S.I. make of reputed company like BCH/Finolex or Equivalent and connecting the pump and starter including all cost,conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of plastic rope MS Well cover,MS Clamp,stainless steel short piece,bend &socket including all cost ,taxes etc all complete as perdirection of the E.I.C.

Supplying and fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank of conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above G.L and placing the tank in required position including conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

1000ltrs capacity water storage tank

supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Staging for 1000ltrs capacity water storage tank

25mm dia CPVC Pipe