SPECIAL REPAIR TO INTERNAL WIRING, LIGHTENING PROTECTION IN ARMOURY BLDG AT AF STN BHOWALI

Amount

Taking down copper/aluminium point wiring any type including FP (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing coping including earth wire complete all as specified and directed.

M&L for Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit not less than 20mm dia with all accessories complete concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Nte : surface conduit shall be laid in ceiling portion only.

All as per Serial Item No. 4 above but for one light point controlled by two Nos. of, two way switches complete all as specified and as directed.

All as per Serial Item No.4 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Serial Item No. 4 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per serial Item No.4 above but for 15 Amps 5/6 pin socket point on independent board with 2.5 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

M&L for pointing wiring with 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit not less than 20mm dia and its accessories including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing,including steel box of required module for modular switches/sockets all as specified for :-Note:- Surface Conduit shall be laid in celing portion only.

(a) One light/fan/Bell point controlled by one switch.

(b) One 3 pin 5 amps socket point on independent board

(c) One 3 pin 5 amps socket point on same board

(d) All as per item No 9 above but for one light point controlled by two 2 way switches.

M&L for pointing wiring with 2.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit not less than 20mm dia and its accessories including one run of 2.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, including steel box of required module for modular switches/sockets all as specified and directed.

M&L point wiring with 1.5 Sqmm (nominal Area), 650 /1100 Volts grade, PVC insulated FRLS multi stranded unsheathed copper conductor cable, in and including ERW rigid stove enamelled steel heavy duty conduit not less than 20mm dia, ISI marked with all flame proof conduit fittings, accessories and junction boxes as per site requirement for one light point/buzzer point controlled by one switch complete all as specified and directed.

M&L point wiring with 2.5 Sqmm (nominal Area), 1100 Volts grade, PVC insulated FRLSmulti stranded unsheathed copper conductor cable, in and including ERW rigid stove enamelled steel heavy duty conduit not less than 20mm dia,, ISI marked with all flame proof conduit fittings, accessories and junction boxes as per site requirement for one socket point controlled by one switch with 2.5 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed.

Supply and fixing Switch piano, flush button, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed.

Supply and fixing Switch piano, flush button, single pole, one way, 15 Amps, 230 Volts complete all as specified and as directed.

Supply and fixing Socket outlet 5 Amps 2-in-1,3/5 pin 230V AC flush type, complete all as specified and directed.

Supply and fixing Socket outlet 15 Amps 2-in-1,3/5 pin 230V AC flush type, complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet as required.

Supply and fixing Bell push, flush type, 5 amp, complete all as specified and directed.

Supply and fixing switch 16 Amps 2 way complete all as specified and directed.

Supply and fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and directed.

Supply and Fixing Modular switch 1 way 6A, 1 module all as specified and directed. .

Supply and Fixing Modular switch 1 way16A, 1 module all as specified and directed.

Supply and Fixing Modular switch 2 way 6A, 1 module all as specified and directed.

Supply and Fixing Modular Bell push 6A, 1 module all as specified and directed.

Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module, all as specified and directed.

Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module, all as specified and directed.

Supply and Fixing Modular fan step regulator, 120W - 2 module all as specified and directed.

Supply and Fixing Modular flush metal box White cover plate with frame,1 module all as specified and directed.

Supply and Fixing Modular flush metal box White cover plate with frame, 3 module all as specified and directed.

Supply and Fixing Modular flush metal box White cover plate with frame, 4 module all as specified and directed.

Supply and Fixing Modular flush metal box White cover plate with frame, 6 module all as specified and directed.

Supply and Fixing Modular flush metal box White cover plate with frame, 8 module all as specified and directed.

Supply and Fix Bell, ding dong / multi music type, AC, 230 volts, single pole complete all as specified and as directed.

M&L for flame proof weather proof rotary switch, single pole, on & off, with cable termination box in LM 6 of 16 Amps rating 250 volts, all as specified and as directed.

Supply and fixing Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed.

Supply and fixing FPWP LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, all as specified and as directed.

Supply and fixing FPWP LED Bulk head light fitting 1x40 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, all as specified and as directed.

M&L Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including existing PVC conduit not less than 25mm dia fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

M&L Submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC conduit not less than 25mm dia fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

M&L Submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through existing conduit/casing caping and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm shall be measured as one length for the purpose of measurement.

M&L Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC concealed conduite not less than 25mm dia and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp ncluding connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. i

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified and as directed

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative watt 230 watt volts AC outdoor type with decorative with impact and corrosion resistant complete with driver and lamp complete connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified and as directed

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. including taking down old fitting complete all as specified and as directed

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. including taking down old fitting complete all as specified and as directed

Supply and fixing of Supply and fixing LED luminaire 600 mm x 600 mm,40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and as directed .

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

supply and fixing 15 Watt light fitting Environmental friendly, new generation, energy saving, decorative IP 66 LED UP-down Luminaire with wall surface mounting using COB LED as light source, complete all as specified and as directed Make : Havells cat part No CLIOWLS15W LED830PSYMTOTG modle no CLIO LED WALL LIGHTequivalent in Crompton/Bajaj/Wipro .

Supply and fixinf in repair Lamp Holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in single door with out bus bar,SPN 2 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 12 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 415V for fixing MCB's complete all as specified and as directed.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket modular type complete with one single pole MCB 20Amps complete all as specified and as directed.

Supply and fix MCB SPN ‘B’ Curve 10KA, 5 to 32 amps complete all as specified and directed .

Supply and fix MCB SPN ‘B’ Curve 10KA, 40 amps complete all as specified and directed .

Supply and fix MCB SPN ‘B’ Curve 10KA, 63 amps complete all as specified and directed .

Supply and fix MCB SP ‘B’ Curve 10KA, 5 to 32 amps complete all as specified and directed .

Supply and fix MCB TPN ‘B’ Curve 10KA, 63 amps, 415V complete all as specified and directed .

M&L weather proof distribution board, duct and vermin proof IP-65, LM-6 body, appropriate size with epoxy powder coating, suitable for the following scheme :-(a) Incoming : MCB 32 Amps, DP, 10 KA, - 01 Nos, (b) Outgoing : (i) MCB,SP, 6/10 Amps, 10 KA - 02 Nos, (ii) Make of DB : Syaam or equivalent in Make Flexpro or Sudhir.

M&L FP weather Junction box entry size 4 way junction box 100 mm Dia Make : Shyam Cat part No: SSPL/JB/105 or equivalent in Make Flexpro or Sudhir.

M&L for wiring for circuit/sub main wiring of FRLS PVC insulated copper conductor 2 single core, 4 sqmm along with earth wire 2.5 sqmm in and including rigid metalic ERW Steel conduit, complete all as specified and as directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and as directed .

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type B1 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I (2009) including dismanteling of existing unserviceable earthing complete all as specified and directed.

M&L for earthing complete with copper plate electrode of size 60cm x 60cm x 3.15 mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using copper strip 20 x 3 mm by means of bolts, nuts, check nuts and washers made of copper and protected by light grade 40 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type B1 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No.5 of SSR Part I (2009), including taking down old unserviceable/rusted earthing all as specified and directed.

Material and labour copper strip 20X 3mm with saddles and fixing screws etc. for roof conductor and down conductor above ground level including taking out old damaged earthing strip from the top of building complete all as specified and as directed.

S&F Air termination single pointed Copper 12 mm dia and 300 mm long including taking out old damaged air termination point from the top of building complete all as specified and as directed.

Material and labour for test point terminal block made of gun metal or phosphorus bronze size 75 X75X25 mm drilled and screwed including 3 nos.8 mm dia 25 mm long hexagonal head screw including taking out old damaged test point from building complete all as specified and as directed.

Supply & fixing porcelain supporting insulator of existing size / adequate size fixing on wall / roof for insulating and supporting the lightning strips to protect during lightning including taking out old damaged /brocken insulator complete all as specified and as directed.

NOORI ENTERPRISES (BID ID -3249970)

SONI ENTERPRISES (BID ID -3243442)

VINYAK TRADERS (BID ID -3248849)

M/S BHATT ENTERPRISES (BID ID -3250272)