Construction of Secondary School building at district BANASKANTHA.

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

3 sorting out and stacking of useful materials and disposing off the 591.37 136.30 Cmt.

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out and

4 stacking of useful materials and disposing off the excavated stuff upto 75.00 276.24 Cmt.

50 Meter lead.(D) Soft rock not requiring Blasting

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding 20cm

in depth consolidating each deposited layer by ramming and

Filling foundation and plinth with murrum or selected soil in layers

6 of 20 cm. thickness inculding watering, ramming and consolidation 1927.22 282.07 Cmt.

Brick work using common burnt clay building bricks having crushing

7 strength not less than 35 kg./Sq.Cm. in foundationand plinth in 259.96 4090.06 Cmt.

Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash Bricks

Masonry work with aerated light weight concrete Blocks of size

60cm x 23cm x 23cm or any other approved size, having crushing

strength @ 35 kg/sqcm Fixing with ready-mixed mortar

('Fixoblock'of M/s Ultratech cement Ltd./Rapid Fix/Lion) having

tensile adhision strength >0.8 N/mm2 and compressive strength of

>2N/mm2.The mortar is to be fixed in a thickness of 3mm to 5mm on

the clean and leveled surface of blockmasonry using proper trowel.

For all floor and lead and lift For superstructure.

Brick work using common burnt clay building bricks having crushing

strength not less than 35Kg./Sq.Cm. for superstructure in cement

mortar 1:6(1 cement :6 fine sand) including curing etc. complete. (C)

Fly Ash Bricks For all heights and all floor

Half brick in common brunt clay building bricks having crushing

strength not less than 35 Kg/sq.cm in cement mortar 1:4 (1 cement :

coarse sand) (C) Fly Ash Bricks in super structure including curing

etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand

:8 hand brocken stone aggregates of 40mm nominal size) in plinth

and curing complete including cost of formwork. (A) Foundation and

Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse

sand : 10- hand broken stone aggregates 40 mm nominal size) and

curing complete including cost of formwork in (A) Foundation and

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse

Sand : 4 graded stone aggregate 20 mm nominal size) & curing

complete including cost of form work (A) Foundation and Plinth -

Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in

one layer and finished with a floating coat of neat cement. (A) 40mm

Providing and laying controlled cement concrete M.150 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings,Base of columns and Mass concrete (Cement Level 290 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Coping Vertical

and horizontal for all floor (Cement Level 360 Kg)

Description Of Item Quantity Rate Unit Amount

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete.(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in Plinth Beams. (Cement

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Beams all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Beams all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (E) Staircases

including lending all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (E) Staircases

including lending all floor (Cement Level 380 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

30 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 28424.16 77.29 Kg.

binding and placing in position etc. complete.For all floors

Providing I.S.I. C.R.S Bars Fe 500 steel reinfocement (ISI mark)

31 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 88596.00 91.64 Kg.

binding and placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering in

cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering in cement

mortar 1:4(1 cement 4 sand) watering, curing etc. complete.For all

Description Of Item Quantity Rate Unit Amount

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 1:1(1

cement 1 sand) watering, curing etc.complete for any Height.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete. The rate shall be including of

providing two coats of primer of approved brand and manufacturer

on new wall surfaces to give and even shade including throughly

brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Distempering with dry distemper of approved brand and manufacture

(two coats) and of required shade on wall surfaces to give an even

shade, over and including applying one coats of Birla (White Cement

36 based) or Asian (acrylic lapy) or equivalent and a priming coat of 6713.67 90.55 Smt

whiting after thoroughly brooming the surface free from mortar

dropping and other foreign matter and sand paper smooth. The rate

shall be including scraping and old deteriorated of existing paint.

Painting two coats (excluding priming coat) on new steel

and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Providing and laying 25mm thick polished Kota stone

flooring/staircase treads (two pieces with three groves in front of

38 steps) over 20mm (average) thcik base of cement mortar 1:6 (1 325.02 1018.88 Smt

cement 6 coarse sand) laid over and jointed with grey cement slurry

including curing, rubbing, and polishing etc. complete.

Re-fixing of existing 25mm thick polished Kota stone

flooring/staircase treads over 20mm (average) thcik base of cement

39 mortar 1:6 (1 cement 6 coarse sand) laid over and jointed with grey 285.00 712.91 Smt

cement slurry including curing, rubbing, and polishing etc. complete.

(As directed by Engineer in charge)

Providing & fixing average 25mm thick Double polished Kota stones

40 for shelves in cup board, seating plat form, including curing, rubbing, 85.69 814.80 Smt

polishing etc. complete. (As directed by Engineer in charge)

Providing & Fixing 25mm thick double polished vertical Kotah stone

41 for (partion)urinal as par drawing including round edge moulding etc 3.96 1361.25 Smt

comp. (As directed by Engineer in charge)

Providing and laying 18 mm thick mirror polished black granite stone

machine cut in single piece (Max. available) in sill and jambs laid

over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse sand) and

42 jointed with grey cement slurry with matching pigment incl. rubbing 9.90 2316.65 Smt

and polishing half rounding edge both side etc. complete colour and

shed as approved by architect engineer in charge. (As directed by

Engineer in charge)

providing & laying cement water proofing of average 60mm thick for

terrace for all floors using first layer cement mortar (1:3) over an

exsisting surface second layer of arranging brick bats acording to slop

adding suitable chemical to make water tieght & again third layer of

cement mortar 1:3 on above including adding water proffing

compound and finishing top with net cement slury using cement @

2.75 kg/sq mt. making any patterns and design on the top etc.

complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain & curve

surface 12mm to 20mm of broken piece of ceramic tiles or Glazed

tiles ( one or more colour as directed by Engg. In charge ) to be laid

over cement mortar bedding of CM 1:3 to plain or and slopes and to

44 be tempered to bring mortar cream up to and colour pigment 816.60 779.70 Smt

including rounding of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and oxilic acid

using 1 kg / 1 bag of water proofing materials.

Description Of Item Quantity Rate Unit Amount

Providing cement vata (10 cm X 10 cm size) quartar round in cement

mortar 1:1 including neat cement finishing, watering etc. complete

Respectely plaster acitivity shall be commenced only after completion

Providing & fixing in position mild steel door with ventilation frame

40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms flate at

lock rail,10 mm square bar in vent at10 cm c/c coverd with

46 corrugated ms sheet 0.6 mm thick, including applying a priming coat 129.65 3718.05 Smt

of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved

drawing and design etc.)

Providing & fixing in position mild steel window with ventilation

frame 35x35x5 mm and shutter frame 25x25x5mm ,10 mm square

bar grill at10 cm c/c coverd with corrugated ms sheet 0.6 mm

thick,including applying a priming coat of read lead paint including

cleanicn the surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and design etc.)

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 63.50 x 38.10 x

mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of

48 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm 14.85 1713.70 Smt

x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),

vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section

no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window.

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming

coat of read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Painting of logo on front side wall as directed by Engineer in charge

and as per approved drawing.

Providing and laying white glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and fixing Chicken mesh jali (22 gauge) 15cm wide at the

junction of 2 different surfaces of different material component at the

time of plastering to prevent cracking in plaster surface as and where

directed at all floors with all leads and lifts etc.complete.

Providing & Fixing Green board(2400mm x 1200mm) with soft

54 board(1200mm x 1200mm) on wall as per the drawing & design etc. 13.00 10352.50 NO

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

55 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire 37.69 853.91 Smt

including roughening,cleaning, fixing and finishing in cement mortar

1:3 and curing complete.(E) 100mm thick

Description Of Item Quantity Rate Unit Amount

Providing & laying Sandwich platform of maximum 700mm width :

a) Sandwich type platform of top stone as 18 mm thick Granite of

approved shade and sample and bottom stone as 25 mm thick single

side polished kota stone with 25 mm thick screed of cement mortar

1:4 in between two stones. The stone shall be fixed by chasing in to

the wall surface and providing necessary MS supports of

50x50x6mm Angle or "T" (hot dip galvanised) and embedded in

between the two stones etc as per the drawing / specification and / or

as instructed of EIC complete and b) 75 mm raised platform (Otli) at

56 floor level with polished kota laid on 50mm screed of (1:2:4) and 17.33 5048.06 Smt

skirting of kota stone as per design and approved sample. The rate

includes rounding, champhering and mirror polishing of edges, facias

of granite, MS supports, all material labour and wastage, as per

drawing, including necessary bonding adhesive (if required) of

Araldite or equivalent. Rate shall be also inclusive of making holes &

cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as

directed by engineer in charge. (Only finished single side granite

work shall be measured & paid for). (As directed by Engineer in

charge& approved drawing and design etc.)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30cm height and 15cm thick of

58 M250 grade concrete as per aprooved design and including 160.00 374.92 Rmt

excavation for fixing in proper line and level, filling the joint with

C:M 1:3 (1 Cement : 3 Fine sand) etc. complete (uptp 10 ton).

Providing and fixing 0.90 meter high fencing with 1.20 meter long

M.S. Angle posts 40 mm. X 40 mm. X 6 mm. And oil painting

coats fixed at 2.5 mt. C/c with Three horizontal lines and two

diagonals of galvanised steel barbed wire weighing 9.38 Kg. Per

meter, strained and fixed to posts with G.I. staples, including fixing

posts in compound wall

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt

x2.46mt x4.00 mt size brick masonary well for water logging with

excavation in any strata upto four meter depth, filling the pit with

B.T. Metal 40 mm in 0.80 mt. depth with 25-40mm kapachi, 0.80 mt.

60 depth and 0.50 mt. depth with coarse sand & charcoal in layers 1.00 241643.51 JOB

including making P.V.C. line for water inlet etc. as directed with

300mm dia bore 40 mt. depth and 200mm dia UPVC CM type casing

pipe as slott 1.5 to 2.0 mm size and ordinary pipe with gravel packing

or as directed.

Providing and constructing filter chamber of size 1.50 x 1.50 x

61 mt. as directed including connection rainwater pipes as per detailed as 1.00 22575.53 No

directed by Engineer in charge including cost of labour and material.

Providing & supplying ISI mark P.V.C butterfly valves & Reflux

valves of following class and diameter including all taxes, insurance,

transportation, frieght charges, octroi, inspection charges, loading,

unloading, conveyance to departmental store.75 MM dia.

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x15 mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as footpath, court yard,

multi modals location etc., laid on 20mm thick base of cement mortar

1:4 (1 cement : 4 coarse sand) in all shapes & patterns including

grouting the joints with white cement mixed with matching pigments

etc. complete as per direction of Engineer-in-Charge.

Construction of a soak well of as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

incharge.( The internal In-to-in dimension shall be considered for

Description Of Item Quantity Rate Unit Amount

Construction of a septic tank as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

incharge. ( The internal In-to-in dimension shall be considered for

RCC GSR ( description of item for turnkey tender)

Preparing structural design of RCC Under Ground / Partially under

ground / above high ground level Reservoir of required capacity as

per relevant I.S.s and constructing the same, including excavation in

all types of soil strata (including rock) including shoring strutting if

required, for loose soil / to protect from collapse due to near by traffic

load, casting 100 mm thick P.C.C. leveling course in M-10, Refilling

the pit with proper soil and disposing of the surplus stuff within a

lead of 50 meters. Including cement plaster in CM 1:2 with approved

water proofing compound to inside water touching surface to

container. Including all types of labour and material charges of

lowering, laying, erecting / hosting and jointing of pipe assembly to

inlet, outlet overflow, washout and bye pass arrangement as per

hydraulic design. Providing and fixing accessories like MS / GI

Ladder, CI Manhole frame and cover, water level indicator, adequate

cowl type ventilators or lantern type ventilator with stainless steel jail.

B.B. Masonry chambers for valves. Providing and applying three

coats of cement paint / snowcem to the out side face of structure. It

also includes satisfactory water tightness test as per relevant I.S. code

and painting name of scheme and capacity on the tank as per

direction of engineer in charge. List of Indian Standards for Design of

GSR / SUMP:-The structural design of GSR shall be in accordance

with provisions relevant I.Ss. (1) I.S. 3370 part I & II 2009 or latest

revised (1.1) I.S. 3370 part III & IV 1965 or latest revised (2) I.S.

– 2000 or latest revised. (3) I.S. 1893 – 2000 – 1984 or latest revised.

(4) I.S. 875, Part – 1 to 3, 1987 or latest revised. General

Specifications:-(1) Water depth in container shall be adopted as per

data of tender. If water depth is not specified the suitable water depth

/ acceptable to field engineer in accordance with hydraulic

requirement shall be adopted for capacity. (2) Shape of container (in

plan) specified by in data shall be adopted in absence circular shape

shall be adopted. (3) Size shall be fixed as per availability of space

Providing and fixing washbasin with single hole for pillar tap with

M.S. brackets painted white including sutting holes and making good

67 the same but excluding fittings.(A) Vitreous China:(ii) Flat Back 4.00 2013.85 NO

washbasin 550 mm x v 400mm size. (i) In white colour including CP

Brass west , MI Fisher union and Pillat tap

Providing & fixing Stainless steel 316 Grab Bar 40mm dia.75Cm

long rail.as directed and approved by engineer incharge.

Construction of ICN Chamber as peras directed and approved by

engineer incharge.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.)

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Providing & fixing urinal of Approved quality including connecting

the urinal with waste pipe, trap etc. complete (A) White earthenware

72 flat back or corner type (including Angle cock,Waste 8.00 1836.03 NO

coupling,connection pipe & waste pipe) as approved by engineer

Providing and fixing wash down water closet (European type W.C

pan) with integral P or S trap including jointing the trap with soil

73 pipe in cement mortar 1:1 (1 cement : 1 fine sand) (seat cover,Jet 3.00 2254.33 NO

spray & Flush Tank to be measured Including) (A) Vitreous China (I)

Long pattern white as directed and approved by engineer incharge.

Description Of Item Quantity Rate Unit Amount

Providing and fixing water closet squatting pan (Indian type W.C

pan) size 580 mm (earthwork, bed concrte, foot rests,Flush Cock and

trap to be measured and including paid) (A) Vitreous China (I) Long

pattern white as directed and approved by engineer incharge.

Providing erecting and fixing double coated ISI water tank of

75 required capacity each with all necessary fittings and connection etc. 2000.00 3.95 liter

complete on terrace

76 Providing & fixing UPVC ball valve(A) 40mm dia. 1.00 1727.10 NO

77 Providing & fixing UPVC ball valve(A) 25mm dia. 2.00 709.02 NO

78 Providing & fixing UPVC ball valve(A) 15mm dia. 2.00 478.74 NO

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps.(B) 150mm

x 100mm size P or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing & erecting open well horizontal mono block pump set with

cast iron body, compete for three phase submersible motor having (A)

81 For 1.5 HP 3 phase open well horizontal mono block pump set 2.00 10284.83 NO

suitable for 190 LPM @ 20 mtr head suitable for 40 mm dia delivery

82 Providing & fixing 110mm dia PVC cowl vent to pipes. 2.00 75.75 NO

83 Providing & fixing 75mm dia PVC cowl vent to pipes. 2.00 55.55 NO

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size

having weight not less than 35Kg.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

85 the help of clamp at every two metre C/C or shall be concealed as 95.40 148.12 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

86 the help of clamp at every two metre C/C or shall be concealed as 196.80 91.84 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 15mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

87 the help of clamp at every two metre C/C or shall be concealed as 35.65 72.65 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

PVC pipes of the following out side dia. Special density complete

with special flange compression type fitting,wall clips etc. including

making good the wall ceiling and floor.(F) 75 mm dia

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete Cat. III

Description Of Item Quantity Rate Unit Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

91 accessories with earth continuity of following type erected on PVC / 12.00 705.99 Pt.

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board. (a) with medium

class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

94 mounting base frame covered with textured / metallic/white front 9.00 283.81 Pt.

plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

95 with textured / metallic/white front plate , modules erected with 9.00 28.28 Each

necessary connections as per site situation directed by Engineer In

charge. (7) Blank Plate Single Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

96 with textured / metallic/white front plate , modules erected with 8.00 168.67 Each

necessary connections as per site situation directed by Engineer In

charge. (11) 6 Amps. Bell Push Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

97 with textured / metallic/white front plate , modules erected with 12.00 202.00 Each

necessary connections as per site situation directed by Engineer In

charge (9) 16 Amp. SP one way switch Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

98 with textured / metallic/white front plate , modules erected with 60.00 224.22 Each

necessary connections as per site situation directed by Engineer In

charge (10) 6/16Amp. Universal socket Cat.III

Description Of Item Quantity Rate Unit Amount

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC

/ Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected

with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

100 50 Hz 1200 mm sweep complete having 3blades with aluminium 12.00 2297.75 Each

blades with , canopy & 30 cm. down rod erected with 3 core flexible

wire with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

101 M.S. Pipe down rod erected duly painted for fan complete with 40.00 126.25 Rmt

proper insulation without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in

RCC slab with Making the site as original.

Supplying & erecting approved make low noise decorative exhaust

103 fan having square frame ABS body with inbuilt lowers & square 2.00 2009.90 Each

frame. 200mm with 1350RPM

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (c)

18-20 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

105 built-surge protection,Polycarbonate diffuser, mounting suitable for 8.00 131.30 Each

E14 / E27 / B22 lamp holders, pf >= 0.5 (B) LED Lamps integral

type, with PC diffuser suitable LAMP holder(b) 5 to 8 watts Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

106 Luminaire efficacy> 85 lumens/watt , 1.00 503.99 Each

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-III

Description Of Item Quantity Rate Unit Amount

Supplying and erecting LED Solar street lights with High power

White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

107 Polycarbonate optics/ lenses with company mark/name engraved or 1.00 21331.20 Each

with 36 hours battery backup & MPPT 24V,7.5 A charge controller

with 12 hours automatic switch on/off with wind speed resistance

(B) 15W, IP-65, PV Module – 80W and 4 mtr poles complete erected

108 Decorative call bell Ting-tong box type 250 volts complete erected 1235.60 79.79 Each

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

109 with necessary PVC fittings & Junction boxes fixed with adhesive 135.00 26.26 Rmt

solution & Clamps with following dia of pipes, in approved manner

as directed (a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

110 with necessary PVC fittings & Junction boxes fixed with adhesive 1.00 36.36 Rmt

solution & Clamps with following dia of pipes, in approved manner

as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

111 required nos. of coupling, PVC bushes, Check-nuts etc. complete of 70.00 23.23 Rmt

following sizes. (2) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size A) with medium class Rigid

PVC pipe and accessories (a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories (g) 4 wire 4 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should

be used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (iv)12 way

Description Of Item Quantity Rate Unit Amount

providing and erecting Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

118 phase 240 V,50Hz. having characteristic of quick action & tripping 1.00 2636.10 Each

with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii)

40Amps. DP Cat. III

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (A)

to 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing and erecting metallic vitrified danger notice board as per

122 language suggested by engineer incharge for MEDIUM VOLTAGE 1.00 80.80 Each

installation to be erected as per IS-2551.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report must

be submitted. (b)For Electrical installation up to 11 KV in normal

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

124 cable 1.1 KV grade to be erected as directed of following size. (L) 4 10.00 426.22 Rmt

Making trench in soft soil of suitable width of 90 cm deep for laying

125 cable or locating the fault all over the run and back filling the same 10.00 54.54 Rmt

and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover

126 the cable crosswise & also on both sides with covering of 7. 5 Cm. 10.00 157.56 Rmt

layer of sand above & below cable (16 bricks per meter)

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall complete. [B] For 5.5 / 6.5 KG

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Providing Abc Type Fire Extinguisher 6 Kg Isi Marked All Required

Fitting Accessories.(M.R.)

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3

130 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed 30.40 1127.85 Smt.

with pigment to match the shade of slab including rubbing and

polishing etc. complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

131 cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 968.00 1467.72 SMT

pointing in white cement.

Item Code:14008CA,No:14.29(C1),Pageno:131

Description Of Item Quantity Rate Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(e) in existing pipe erected flushed on

wall/ceiling complete,Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.(e) in existing

pipe erected flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

134 PVC / Metallic/Wooden box covered with appropriate front plate 27.00 0.00 Pt.

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board(e) in

existing pipe erected flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

135 PVC / Metallic/Wooden box covered with appropriate front plate 18.00 0.00 Pt.

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board.(e) in existing pipe

erected flushed on wall/ceiling complete,Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

136 mounting base frame covered with textured / metallic/white front 54.00 0.00 Pt.

plate modules erected on / in wall / ceiling with following type

accessoriesCat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as

directed.(e) in existing pipe erected flushed on wall/ceiling complete

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

138 with textured / metallic/white front plate , modules erected with 4.00 0.00 No.

necessary connections as per site situation directed by Engineer In

charge.(10) 6/16Amp. Universal socket

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

139 with textured / metallic/white front plate , modules erected with 90.00 0.00 No.

necessary connections as per site situation directed by Engineer In

charge.(7) Blank Plate Single,Cat.III

Description Of Item Quantity Rate Unit Amount

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

140 with textured / metallic/white front plate , modules erected with 25.00 0.00 No.

necessary connections as per site situation directed by Engineer In

charge.(8) Computer RJ-45 socket ,Cat.III

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.)of following size complete to be erected on/in

141 wall or ceiling erected with necessary PVC fittings & Junction boxes 500.00 0.00 Mtr.

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (a) 20 mm

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.) of following size complete to be erected on/in

142 wall or ceiling erected with necessary PVC fittings & Junction boxes 250.00 0.00 Mtr.

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with

143 required nos. of coupling, PVC bushes, Check-nuts etc. complete of 20.00 0.00 Mtr.

following sizes.(2) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size,(E) in existing

pipe,(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size,(E) in existing

pipe,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size,(E) in existing pipe,(a) 2 wire

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size,(E) in existing pipe,(h) 4 wire

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

148 copper conductor FRLS PVC insulated stranded wire of green colour 10.00 0.00 Mtr.

for earth continuity of following size,(E) in existing pipe,(i) 4 wire

(use earth wire of 4 sq.mm )

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

149 existing pipe of following size (Specifically for control panel, relays, 10.00 0.00 Mtr.

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(d) One wire 4.00 sq.

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

150 existing pipe of following size (Specifically for control panel, relays, 10.00 0.00 Mtr.

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(f) One wire 10.00 sq.

Supplying and erecting Flexible PVC insulated multi strand multi

151 core 1.1 kv grade ISI marked copper wires of following size to be 100.00 0.00 Mtr.

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

Description Of Item Quantity Rate Unit Amount

Supplying and erecting Flexible PVC insulated multi strand multi

152 core 1.1 kv grade ISI marked copper wires of following size to be 90.00 0.00 Mtr.

erected as directed.(c) 1.00 Sq.mm 2 core round/ flat PVC sheathed

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction,[C] CAT -

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC

/ Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected

with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ,For Modular Type Accessories ,Cat. III

155 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 0.00 No.

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.),(A) Tube Light with integral driver,(ii)

20 Watts, Surge - 2KV,IP-20, conventional 4 feet,Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

E14 / E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps integral

type, with PC diffuser suitable LAMP holder,(ii) 8 watts ,Cat-III

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

158 than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 30.00 0.00 No.

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.,(ii) 48 to 60 Watts,Cat-lll

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

159 thermal & magnetic release suitable to work on A.C. supply 50 c/s. 1.00 0.00 No.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat

Providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..(1) 15 A -100 A , CT

Description Of Item Quantity Rate Unit Amount

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating tape

for phase sequence of following current carrying capacity, erected

with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (A)

Suitable for 100 Amp. capacity

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark , Cat.III

Providing & erecting 240 V MCB double pole switch for lighting

163 Load (B Curve) having 10 KA breaking capacity & confirms to IS : 4.00 0.00 No.

8828 in existing box having following capacity (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity ,(A)

6 to 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

166 without MCB to house appropriate nos. of MCBs.(The DBs should 4.00 0.00 No.

be used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b) sheet steel

double door,(ii)6 way (IP-43)

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (i) 25 Amps.DP Cat-III

Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component for

following Max. rating erected as directed.,(ii) 40Amps. FP , Cat. III

Providing & erecting Medium Voltage Danger Notice Board sticker

169 as per language suggested by engineer incharge of standard size as 5.00 0.00 No.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

170 value surrounded by highly conductive compound with high charge 1.00 0.00 No.

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate including value of earth resistane of installation.(a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

171 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 0.00 Kg.

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

173 For using salt and charcoal / coke as required for pipe type earthing 15.00 0.00 No.

Description Of Item Quantity Rate Unit Amount

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.(B) The

standard companies switch gear shall be used and only manufacturers

at CPRI approved factory ,(i) with 350mm depth

Providing , erecting , fabricating the M.S. structure as per requirement

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on site

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

cables,(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables.(B) 4 core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying

178 cable or locating the fault all over the run and back filling the same 337.50 0.00 Mtr

and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the fault

all over the run and back filling the same and making the surface as

Supplying following size of Light duty “A” Class G.I . Pipe &

erecting as directed by Engineer-in-charge. (B) 50 mm dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

181 connecting accessories of same material at required depth in existing 50.00 0.00 Mtr

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

182 connecting accessories of same material at required depth in existing 338.00 0.00 Mtr

trench for laying of cable. below ground / road surface for enclosing

cable (C)90 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.(B) 2 to

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for

following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Description Of Item Quantity Rate Unit Amount

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 6 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (D) 35 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (B) 10 Sq.mm

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

189 M.S. Pipe down rod erected duly painted for fan complete with 27.00 0.00 Mtr.

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Supplying & erecting single phase approved make industrial exhaust

fan suitable for medium duty ring mounted low noise operation

suitable for medium duty having following dia size and maximum

speed in RPM,[A] 305 mm dia 900 RPM,Cat.II

193 Providing suitable M.S. louver shutter of the Exhaust fan. 4.00 0.00 No.

Providing window frame suitable for erection of Exhaust fan

194 complete covering the remaining portion of window with 15 mm. 6.00 0.00 No.

thick plywood and colour washing to match the colour of the wall.

Supply of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint. Pole should be flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

195 the paint. Minimum coating thickness shall be 80 to 100 micron. 15.00 0.00 Each

Deflection of the pole shall not exceed more than 10% of the length

of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(3)

Suitable for direct grouting & Single arm Bracket. [D] Overall length

of 5 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia: 90/145 mm ± 3mm approx. approx. Weight of

Pole 25 kg approx.

Providing Aluminium arm bracket of having 2 sets of suitable SS304

196 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 15.00 0.00 No.

to 114 mm pole top dia) (A) Single arm bracket

Description Of Item Quantity Rate Unit Amount

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob

197 & hinged doors as per requirement having locking arrangements with 2.00 0.00 No.

mounting clamp with nuts, bolts & washers suitable for erection on

pole with cable clamps& earth bolt of following size of box. (B)

250mm x 200mm x 100mm [deep]

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery)

with automatic changeover from AC to Battery operation, duly

protected by wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying & erecting recess wall mounting speaker with 5W rated

input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz

201 frequency response with 6 inch dia. cone type 8 ohms speakers duly 10.00 0.00 No

fitted in ABS plastic cabinet of colour match with wall or ceiling of

following size. (b)Square shaped 260 x 260mm size speaker

Supplying, installing and testing approved make microphone for All

purpose, with frequency response of 100 - 11000 Hz, having

sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied with

quick detachable holder, 6 mtr twin core cable & 3 pin XLR

connector. [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating

coil, thermostats, relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating,

coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

205 buster DC pump capacity 80 psi, mention with 40 psi inline type post 15000.00 0.00 No.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed ,[B] 25 Ltr / Hr

with 30 Ltr. Storage Tank

Description Of Item Quantity Rate Unit Amount

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

206 buster DC pump capacity 80 psi, mention with 40 psi inline type post 30000.00 0.00 No.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr

with 150 psi 2 nos booster pump

Supplying and erecting approved make panel mounting type Digital

Ammeter having 3 digits LED display, external CT operated,

207 calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , 1.00 0.00 No.

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary 50/5

209 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly 4.00 0.00 No.

secured with insulating materials connected to the meter

Supplying and erecting approved make suitable panel indicator LED

type lamp, lens cover, complete erected with necessary connections.

Supplying and erecting Ammeter / Voltmeter selector switch for

211 phase AC Supply 500 V on existing panel board with necessary 1.00 0.00 No.

Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor having

212 [A] For 1.5 HP 3 phase open well horizontal mono block pump set 2.00 0.00 No.

suitable for 190 LPM @ 20 mtr head suitable for 40 mm dia delivery

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps for

213 R- Y - B phases, overload relay, Automatic water level controller, 1.00 0.00 No.

Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame grouted on wall

as directed. The isolator, overload relay & contactors will be of L &

T, Siemens or BCH make only. (A) DOL up to 5.0 H.P.

Lowering of submersible motor pump set at the depth of following

,complete with required. Nos. and size of casing pipes erected by

means of proper chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the load of the pump set

and pipe assembly filled up with water (D)For Open well Horizontal

submersible pump set for sump well(i) 1 HP to 5 HP

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

215 flexible Submersible copper cable approved make of following Size. 550.00 0.00 Rmt.

(c) 3 Core x 4 Sq. mm

Supplying rubber matting of following thickness as per IS:15652/IEC

SUPLYING, INSTALING, TESTING AND COMMISSIONING

premises of pipes and as per spec G.I. Pipe fittings such as Bends,

Tees, reducers, rubber insertions asnd galvanised nuts and bolts

includding Flow Directions Marketing, One coat of Primer, one coat

of Signal Red color 100 MM

SUPLYING, INSTALING, TESTING AND COMMISSIONING

premises of pipes and as per spec G.I. Pipe fittings such as Bends,

Tees, reducers, rubber insertions asnd galvanised nuts and bolts

includding Flow Directions Marketing, One coat of Primer, one coat

of Signal Red color 80 MM

Description Of Item Quantity Rate Unit Amount

Providing & Fixing Of SS, Fire Hydrant Single Headed Valve Isi

Mark, With 80 Mm N.B. Flanged Inlet, Ss 316 Orifice Plate, Ss

Spindle Controlled 63 Mm Dia Female Instantaneous Outlet Type. Ss

219 Coupling, Blank Cap, Chain, Twist Release Type Lug & All 4.00 0.00 Nos.

Accessories Conforming To Is:5290 Including Fixing With Anchor

Fastner And Flanged Tapping From Wet Riser, Complete As

Providing and fixing 63mm Parole fire hose of approved grand

conforming to IS 636 type B having crushing pressure of

220 kg/cm 2 of ISI marked of 15 mtr length fitting with necessary S.S 4.00 0.00 Nos.

63mm delivery hose coupling as IS 903 with ISI mark bided with GI

wire etc complete directed.

Providing & Fixing Of Of 63 Mm Dia Instantaneous Pattern Short

Branch Pipe, Made From Ss , Isi Mark, 20 Mm Dia Nozzle

Conforming To Is 903, Suitable For Inter Connection To Hose Pipe

Coupling Complete As Required.

Providing & Fixing Of Swinging Type Isi Mark, First Aid Hose Reel

In Red Colour Drum With 30 Mtrs Long 25 Mm Dia Heavy Duty

Rubber Water Hose, 25 Mm Dia Globe Valve Stop Cock,

Terminating With Ss Coupling & Nozzle Of 8Mm Outlet With Shut

Off Valve Confirming To Is 8090 - 1976 Complete With Ms Socket

For Tap-Off, Drum And Brackets (Including Painting) For Fixing On

Wall With Anchor Fastner, Bolts & Nuts Conforming To Is:884-

1969 Complete As Required.

Providing & Fixing Of Lockable Cabinet, Made Out Of Ms Sheet Of

20 Gauge Thickness Having Central Opening And 4 Mm Thick

Glazed Glass Doors (Twonos.) To Accommodate 1 Nos Of Hose

Pipe (15Mtr) And 1 No. Gm / Ss Branch Pipe Etc Suitably Marked

On The Outside With The Letters "Fire Hose" Including Necessary

Locking Arrangement And Shall Be Painted With One Coat Of

Primer And Two Coats Of Synthetic Enamel Paint Of Approved

Providing & Fixing Of Hand Lever Operated Butterfly Valve (100

224 Mm Dia) With Ci Body And Ss Disc With Epdm Linning With All 4.00 0.00 Nos.

Required Accessories Like Flange, Teflon Gaskate, Gi Nut Bolts Etc.

Providing & Fixing Of Hand Lever Operated Butterfly Valve (80

225 Mm Dia) With Ci Body And Ss Disc With Epdm Linning With All 4.00 0.00 Nos.

Required Accessories Like Flange, Teflon Gaskate, Gi Nut Bolts Etc.

Sitc Of Ci Non-Return Valves (100 Mm Dia) As Per Is:5312 (Part 1)

226 1984, Wafer Type With Required Flange, Nuts, Bolts And Gaskets 4.00 0.00 Nos.

Providing & Fixing Of 2 Way Valve Isi Marked All Required Fitting

Providing & Fixing Of 450 Lpm Fire Pump With Panel Isi Marked

228 All Required Fitting Accessories. . (One Year One Time Motor 2.00 0.00 HP

Winding Warranty)(M.R.) 7.5 Hp

Sitc Of Gm 25Mm Dia Air Vent Valves With 25 Mm Dia. Ball

Valve, Nipple And Other Required Accessories.

Providing & Fixing Of Fire Proof 3.5C X 50 Sq Mm Cable As

Required Isi Marked All Required Fitting Accessories.

Providing ABC Type Fire Extinguisher 6 Kg Isi Marked All

Required Fitting Accessories.(M.R.)

Providing Co2 Type Fire Extinguisher 4.5 Kg Isi Marked All

Required Fitting Accessories.(M.R.)

Providing & Fixing Of Manual Call Point Isi Marked All Required

Fitting Accessories.(Boq)

Suplying, Instaling, Testing And Commissioning Of Fire

235 Providing & Fixing Of Presure Meter Switch Isi Marked.(Boq) 9.00 0.00 Nos.

Providing & fixing PVC water tanks as required on GROUND level

236 including making platform for bottom support and making necessary 1.00 0.00 Liters

inlet, outlet and overflow connection etc. complete.(BOQ)

Construction of an On ground masonry water tank as per the

237 approved drawing & design etc. complete as per engineer 1.00 0.00 Liters

Providing and fixing to wall, ceiling & floor U.P.V.C (SCH 40) of

238 the following Outside dia. Tube fitting and clamps, and testing 90.00 0.00 Mtr

including making good wall and floor etc. (c) 75mm Dia.

Description Of Item Quantity Rate Unit Amount

Providing & fixing UPVC check or non-return fullway

valve(A)75mm dia.

240 Providing & eraction Core Cutting up to 200mm 4.00 0.00 Nos.

Supply & installation of Conventational , Fire Alaem Control Panel

Make Agni or similar

Supplying installation, Testing & Commissioning of On/Off switch

for all Hydrant Post.

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words