CA NO. CWE/HILLS/RKT/49 OF 2022-2023 ADDN/ ALTN CUM SPECIAL REPAIRS TO 02 OFFRS, 04 JCOs AND 16 OR MD ACCN AT MIL STN HALDWANI UNDER GE RANIKHET

Amount

M&L for brick work with sub class `B’ bricks old size, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class `B’ bricks old size, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for RCC 1:2:4 type B-1, 20 mm graded stone aggregates in slab supported on walls, beams and columns in floors, roof, landing, balconies complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and rough finished surfaces of concrete flat complete all as specified and directed..

M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

M & L for mild steel TMT bars,10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick 1:6 complete all as specified and directed.

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl rounding off edges and bull nosing of all external edges over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Mirror polished Kota Stone slab flooring 20-25 mm thick over cement screed bed 15mm thick 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for mirror polished Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finishing in cement concrete surface even and rough to receive screed bed complete all as specified and as directed.

M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Joint free Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/dado or vertical surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Glazed coloured ceramic tiles in vertical surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Vitrified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and white or coloured cement to match not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc complete all as specified and as directed.

M&L Vitrified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and white or coloured cement to match not exceeding 0.36 sqm but over screed bed or bedding layer 10mm thick 1:4 on vertical surfaces/skirting complete all as specified and as directed

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

Taking up or down GI Water Tubing 15mm dia (bore) including connections and fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and directed.

Taking up or down GI Water Tubing 20mm dia (bore) including connections and fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and directed.

Taking up or down GI Water Tubing 25mm dia (bore) including connections and fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and directed.

Supply and laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete all as specified and directed.

Supply and laying Steel Water Tubing 20mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete all as specified and directed.

Supply and laying Steel Water Tubing 25mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. .

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Dismantling of floor, hearth, wall tiling including taking down plastering in cement mortar removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F in repair 15mm dia bib taps CP Brass with Capstan head, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

S&F brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete all as specified and directed.

S&F in repair Angle Cock, 15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Ball Valves Brass, 20mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F in repair Ball Valves Brass, 25mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F Tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

S&F Glass shelf assembly 450 x 125 x 5.5mm (with ABS Bracket) chromium plated bracket guard and SS railing complete all as specified and directed.

S&F Toilet cabinet Mirror of size 400 x 500 made out of 2mm thick acrylic sheet with internal shelves and openable shutters incl 10mm dia aluminium /brass CP rod make as approved by GE complete all as specified and directed.

S&F Soap Dish stainless steel 304 grade size 12cmx12cmx8cm, complete all as specified & directed.

S&F stainless steel 06 pin (Peg Set) bath room cloth hanger 25-30cm long, complete all as specified & directed.

S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed.

S&F Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified & directed.

S&F Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) complete all as specified & directed.

S&F Stainless steel towel Ring including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S&F 15mm dia bib taps Sink Cock swinging spout with flange chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

S&F Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified & directed.

Supply & Fixing stainless steel plate rack of stainless steel 1.00 mm thick of size 24x30 x10 inch of best quality including necessary stainless steel screws, rawl plugs and washers complete all as specified and directed.

S&F Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

Demolition and taking out cement mortar or lime concrete, brick bats from sunken floor portion complete all as specified and as directed.

M&L for 15mm thick cement plaster as in sunken portion of WC/Bath room using CM (1:4) on fair faces of concrete surfaces using WPC where ever required as per manufacturer's instructions and finishing the surface even and smooth (using extra cement) etc. incl finishing even and fair complete all as specified & directed. NOTE -WPC shall be measured and paid separetely.

M&L for PCC 1:2:4 type B-0 as in Sunken Portion of WC/Bath room (using 12.5mm graded stone aggregate) complete all as specifed and directed.

M&L for lime conrete with lime mortar 1:5:10 mix using 40mm graded brick coarse aggregate in sunken Portion of WC/bath room complete all as specified and directed.

M&L for cleaning surface of Sunken Portion of WC and applying a coat of bitumen primer @0.30 Kg/Sqm and thereafter applying a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and provn of APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms/sqm) laid on bituminous surfaces by forced application over entire roof area, with side lap not less 100mm and end lap not less than 150mm complete all as specified & directed.

S&F vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggregate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat, black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed.

S&F PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets, CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected items of any description, complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 450mm x 300mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S&F wash hand basin of vitreous china counter sunk size 450mm x 350mm x 150mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Sinks without drainage board made of stainless steel 0.75mm thick kitchen or laboratory, overall size 430mm x 510mm bowl size 430mm x 380mm x 203mm complete all as specified and directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and directed.

Dismantling of PVC / CI pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed.

Dismantling of PVC / CI pipe 75mm dia or less jointed in cement mortar and taking out of trench if required complete all as specified.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., but except pipes complete all as specified and directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., but except pipes complete all as specified and as directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and directed.

M&L for cast iron spun pipe 50mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., but except pipes complete all as specified and directed.

S&F CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and directed.

S&F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and directed.

S&F CI spun pipe branch piece 100mm bore, double (equal or unequal), with parallel branches and fitted with oval access door complete all as specified and directed.

S&F CI spun pipe branch piece 75mm bore, single (equal or unequal), ordinary or inverted spigot or socketed type with parallel branches and fitted with oval access door complete all as specified and directed.

Extra over CI spun pipe fittings if fitted with oval access door 100mm complete all as specified and directed.

Extra over CI spun pipe fittings if fitted with oval access door 75mm complete all as specified and directed.

M & L for extra over cast iron pipes and fittings if lead joint is provided in lieu of of cement joint for 75mm bore pipe complete all as specified and directed.

M & L for extra over cast iron pipes and fittings if lead joint is provided in lieu of of cement joint for 100mm bore pipe complete all as specified and directed.

S & F CI spun fittings floor tarps of size 75mm with grating including jointing to CI pipe with lead joint complete fixed in repair incl making joint water tight complete all as specified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each and refixing in same opening complete all as specified and as directed.

S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8.2.1 B.of SSR Part-II 2004 complete all as specified and directed.

S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply & fixing aluminium sheet powder coated of thickness not less than 4mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed.

Sheet glass 4.8mm thick tinted glass and glazing in squares complete all as specified and directed.

S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F powder coated aluminium windows with side hung shutters including jointing cleat for fixing, glazing clip, beading and glazing plate , MS expansion fastners , neoprene gasket ;4.80 mm tinted glass panes , Anodised handles 100 mm long (02 Nos for each shutter) , anodised peg stay 150 mm long, Anodised tower bolts 125 mm long (1 No for each shutter) complete all as specified . Section of anodised windows shall be of following sizes: Chowkat/Frame: 65 x 38 x 1.48 mm thick fixed with rawl plug and GI screws sizes of Shutter: 44.5 x 47.5 x 1.5 mm thick Note : Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows/Door in CM 1:3 or PCC 1:2:4. The rates for the same should be deemed to be included in the respective items.

S&Faluminium powder coated windows with side hung shutters including jointing cleat for fixing, glazing clip, beading and glazing plate , MS expansion fastners , neoprene gasket ; stainless steel wiremesh 0.36mm nominal dia of wire and average width of aperture 1.40mm , Aluminium powder coated handles 100 mm long (02 Nos for each shutter) , Aluminium powder coated peg stay 150 mm long, Aluminium powder coated tower bolts 125 mm long ( 1 No for each shutter) complete all as specified . Section of aluminium powder coated windows shall be of following sizes:Chawkat/Frame: 65 x 38 x 1.48 mm thick fixed with rawl plug and GI screws & sizes of Shutter: 44.5 x 47.5 x 1.5 mm thick complete all as specified and directed. Note : Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows/Door in CM 1:3 or PCC 1:2:4. The rates for the same should be deemed to be included in the respective items.

S&F Aluminium Powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm and suitable aluminium anodised frame F/H section complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinge with steel handle and steel peg stay incl 3 Nos tower bolt 100mm, complete with glazing bars, dovetailed or welded complete all as specified and directed. Note:- Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows in CM 1:3 or PCC 1:2:4. The rates for the same shall be deemed to be included in this item.

S&F Steel windows with side hung shutters including box type hinge with steel handle and steel peg stay incl 3 Nos tower bolt 100 mm, complete without glazing bars, dovetailed or welded complete all as specified and directed. Note:- Contractor has to make good all the jambs, cills and broken portion of wall while fixing of windows in CM 1:3 or PCC 1:2:4. The rates for the same shall be deemed to be included in this item.

S&F Steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and directed.

S&F as in repair mild steel wire cloth, .45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and directed

S&F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F framed work as in doors or gates of angle to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete Fe 410-W Gde E250 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast complete all as specified and directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and directed.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and directed.

S&F 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 35 mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) 2nd class hard wood (Shisham), 35mm thick shutter complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 including two coats of cement base paint /colour wash complete all as specified and directed.

S&F Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window complete all as specified and directed.

S&F 18mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face veneers on both faces fixed with screws to timber frame work, colour and pattern as approved including external teak wood lipping complete all as specified and directed.

Material & labour for stainless steel telescopic channel for drawers not less than 45 cm long complete all as specified and directed.

S&F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30mm complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles not exc 200 cu. cm each complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and directed.

S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F stainless steel handle, fancy type anodized 100mm size complete all as specified and directed.

S & F aluminium handle, cast type anodized 150mm size complete all as specified and directed.

S & F as in repair hasp and staple 150mm size of aluminium anodised complete all as specified and directed.

S & F 150 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and directed.

S & F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

S&F Butt hinges medium weight cold rolled mild steel of 50mm long complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified and directed. NOTE -WPC shall be measured and paid separately.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of cement concrete (reinforced), cutting scraping and cleaning reinforcement, M&L for providing RCC 1:2:4 type B1 including form work and scaffolding upto 6.00 m height in chajjas, parapets, roof projections and similar RCC works complete including rendering 10 mm thick in CM 1:3 finished evern and smooth on RCC surfaces complete all as specified and directed. (New reinforcement to be provided shall be measured and paid for separately).

M&L for applying two coats of synthetic enamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint to old decorated wooden surfaces of girth exc 10 cm including preparation of surface complete all as specified and directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete all as specified and directed.

M&L for one coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete all as specified and directed.

M&L for complete removal of existing surface and applying two coats of oil bound distemper over a coat of primer white or tinted on old decorated/undecorated surfaces of wall complete all as specified and directed.

M&L for 3mm thick wall care putty on wall complete all as specified and directed.

M&L preparing new plastered or unplastered surfaces of Ceiling and applying two coats of distemper oil emulsion paint complete all as specified and directed.

M&L for complete removal of existing surface and applying two coat of Oil Bound Distemper over a coat of primer on old decorated/undecorated surfaces of Ceiling complete all as specified and directed.

M&L for 3mm thick wall care putty on ceiling complete all as specified and directed.

M&L Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing surface and applying two coat of cement base paint over a coat of primer on old decorated/undecorated surfaces of walls complete all as specified and directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rounded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed.

M&L 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed.

S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into mattresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified and directed.

M&L 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP No-1 liguid @ 200ml of per 50 kg of cement complete all as specified and directed.

M&L for 40mm thick brick tiles(except tiles) laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP No-1 liguid @ 200ml of per 50 kg of cement complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen complete all as specified and directed.

M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified and directed.

Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position 750 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position 1000 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

M&L for providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) set in CM 1:4 in louvers and jallies, 40mm thick (measured solid), including all mouldings and interlocking pillars complete all as specified and directed.

S&F stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats brackets etc. complete all as specified and directed.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints on chhajja top, laid on 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

S&F rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings complete all as specified and directed.

Supply and Fixing plain galvanized mild steel sheeting as in ridges, valley gutters, covering to crumple etc using 0.80mm thick, with grade of zinc coating 275 complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 75mm thick Plain Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floors laid in bays and form work if any complete all as specified and directed.

M&L chequered cement concrete tile 30cmx30cmx25mm thick with white cement & piment, set, jointed and pointed in neat cement slurry in floors, laid over 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall applying a layer of wall care putty 2mm thick (averaging) , finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for complete removal of existing treatment by srapping down of old surface of wall applying a layer of wall care putty 2mm thick (averaging) , finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed .

Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonary walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed. Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No. 172 herein before but one light point controlled by one two way switch complete all as specified and directed.

All as per item No. 172 herein before but one socket outlet 5 Amps on the same board complete all as specified and directed .

All as per item No. 172 herein before but one 3 pin socket outlet 5 Amps independent complete all as specified and directed .

All as per item No. 172 herein before but one bell point controlled by one bell push switch complete all as specified and directed .

All as per item No. 172 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket complete all as specified and directed .

Supply & Fixing lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, two way 15 Amp complete all as specified and directed.

Supply & Fixing switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

Supply & Fixing Bell push, flush type , 5 Amp complete all as specified and directed .

Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc complete all as specified and directed .

Supply and fixing bell electric multi musical type AC 230 volts, 50 Hz complete all as specified and directed .

S&F ceiling rose surface bakelite 3 terminal with base plate complete all as specified and directed .

Supply and fixing of modular type 6 Amp one way switch ,white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing of modular type 6 Amp two way switch ,white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing of modular type 6 Amp 2/3 Pin combined socket shuttered ,white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing of modular type Switch 1 way 16 Amp, 1 Module ,white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing of modular type Switch socket combination 16Amp, 6 Pin, 3 Module ,white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing of modular type 6 Amp bell push switch modular type, white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing of modular type Steped type electronic fan regulator modular, 120W-2 module , white polycarbonate, switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

Supply and fixing white cover plate with frame 2 module on existing boxes complete all as specified and directed.

Supply and fixing white cover plate with frame 3 module on existing boxes complete all as specified and directed.

Supply and fixing white cover plate with frame 4 module on existing boxes complete all as specified and directed.

Supply and fixing white cover plate with frame 6 module on existing boxes complete all as specified and directed.

Supply and fixing white cover plate with frame 8 module on existing boxes complete all as specified and directed.

Supply and fixing anodised rust proof 18 SWG MS box, flush type of size 75mm x 105mm x 50mm deep (1-2 Module) (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete all as specified and directed.

Supply and fixing anodised rust proof 18 SWG MS box, flush type of size 75mm x 105mm x 50mm deep (3 Module) (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete all as specified and directed. .

Supply and fixing anodised rust proof 18 SWG MS box, flush type of size 75mm x 105mm x 50mm deep (4 Module) (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete all as specified and directed.

Supply and fixing anodised rust proof 18 SWG MS box, flush type of sizes 75mm x 210mm x 50mm deep (6-8 Module) (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit (ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and white wash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified and directed. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 10 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified and directed. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit (ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified and directed. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 2.5 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”.

Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours. complete all as specified and directed. Note:- LED tube light shall be purches to get minimum 3 year warranty of material from manufacturer.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete all as specified and directed. Note:- Contractor shall submit 3 year warranty of material from manufacturer alongwith purchase voucher.

Supply & Fixing sheet metal enclosure for DBs (double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing sheet metal enclosure for DBs (double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of FP 40 to 100 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

M&L for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and make the fan operational with a guarantee period of one year after installing the repair fan complete all as specified and directed.

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp 240 Volts complete all as specified and directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note:- Contractor shall submit 3 year warranty of material from manufacturer alongwith purchase voucher.

Supply and fix water heater storage type electric supplied and installed complete of capacity 25 ltrs heating element upto 2 KW, BEE 5 star rate complete with all accesories such as safety valve, thermostat, NRV, connection piece, etc including making connection with industrial socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed. Note:- Contractor shall submit 3 year warranty of material from manufacturer alongwith purchase voucher.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 35 Sqmm 3.5 core laid in trenches or passing through pipes/ducts and incl taking down existing unserviceable cable and the disturbance surface of road making good with using PCC complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide, depth exceeding 1.5 mtr and getting out in hard/dense soil complete all as specified and directed.

Returning, filling incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :- Thickness of sand cushioning shall be measured after punning.

Supply and fix unreinforced PCC cable cover class LV type I of size 0.25x0.15x0.04mm complete all as specified and directed.

Supply and Fixing steel tube medium grade galvanised 32 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed.

M&L panel box concealed in wall , double door type with die cast type made all of 18 guage CRCA sheet of suitable size for fixing of KWH meters MCCB, MCB, Bus bars etc as per IE rules comprising of following and necessary wiring for MCBs, meters- 05 Nos. with Locking arrangements and optical glass over the electronic meter complete all as specified and directed. (a) S&F MCCB 100 Amps 415 volt, TPN, 25 KA - 01 No (b) S&F MCB SPN 63 Amps - 5 Nos (c) Space and mounting brackets for fixing of 5 Nos single phase KWH meters. (d) Fixing only the existing electronic meter as per existing sl No. of qtr.

M&L for Earthing complete with galvanized sheet earth plate electrodes 60x60x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering and connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed.

m/s meetu enterprises