Floor Tiling work at B-Type Qtrs Ph-I at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Floor Tiling work at B-Type Qtrs (Ph-I) at HAL Korwa.

NIT No.- HAL/KWD/Civil/04 of 24-25 Date: 03.06.2024

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: Average annual financial turnover during the last 03 years, ending 31st March of the previous financial year,should be at least 30% of estimated value.

2 EMD (As per NIT)

3 Latest solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

iii) Registration certificate with Government department and Government undertaking, if any.

6 Proof of GST registration

7 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

8 Constitution and legal status.( Partnership/ Proprietary)

9 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

10 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

11 Tenderers are required to attach Format of undertaking as per Annexure I & J

12 Signature done, wherever required.

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

NAME OF WORK:-Floor Tiling work at B-Type Qtrs (Ph-I) at HAL Korwa.

NIT No: HAL/KWD/Civil/04 of 24-25

Note: 1. Tenderers are required to make the Data Entry of the item rate in figures only. The rate to be inserted should invariably correspond to the 'Unit' given under unit column.

2.The rate quoted shall be inclusive of all taxes / duties / statutory etc. including GST (100%) or as applicable.

Name of Contractor :

SL. No Description of Items Qty. Unit Rate in figure (Rs.) Rate derived excluding GST @18% Rate in words ( Rs.) Amount in ( Rs.)

1 Providing & laying Vitrified ceramic tiles Ultra charge of first quality of size 600 x 600 mm on floor of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface mixing acid with water after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 3856 Sqm 0.00 0.00

2 Providing & laying glazed antiskid ceramic tiles of size 300 x 300/400x400mm with first quality of Kajaria/ Johnson/ Somany or equivalent approved make, shade design in floor over 20 mm thick bed mortar in C.M.1:4 (1 cement, 4 coarse sand) and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P etc all complete as per specification and direction of E.I.C. 10 Sqm 0.00 0.00

3 Providing & laying coloured ceramic glazed digital series wall tiles, coloured & printed at any floors of first quality of size 300x450 mm, 300x600mm or larger on wall surface, skirting, dados and risers of steps etc of approved brand & shade such as Kajaria/ Johnson/ Somany or approved , grouting of tiles with neat cement slurry and joints finished with matching colour/pigment with epoxy solution over a plaster base surface, 15mm thick mortar in CM 1:3 ( 1 cement,3 coarse sand) etc and finally cleaning of surface of tiles including labour, material, cartage, wastage, T&P, removal of cistern, wash basins if required at the time of laying of tiles, wastage, debris inside HAL premises where directed etc all complete as per specification & direction of EIC. 174 Sqm 0.00 0.00

4 Removing and refixing of existing flush/ guaged/ PVC door shutters carefully from the wooden / MS frames including repair by cutting, painting wherever required etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required after laying of tiles including all labour, T&P, screws etc all complete as per specification & direction of EIC. 400 Nos 0.00 0.00

5 Providing and laying Plain cement concrete in 1:2:4( 1 cement: 2 coarse sand: 4 - 12.5mm graded stone aggregate of Bharatkoop/ Dala/Jhansi) as levelling coarse on existing floor or any description of work including mixing, curing, T & P , placing, levelling, making required slope, hacking on floor before laying etc all complete as per specification & direction of EIC. 10 Cum 0.00 0.00

6 Providing and applying two or more coats of acrylic distemper on old/ new surface (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surfacewith complete removal of existing treatment wherever required including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, including repairing minor existing damaged plaster, surface preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 10629 Sqm 0.00 0.00

7 Dismantling/Taking down cement plaster /mosaic on brick or stone walls of any description at any height/depth, raking out the joints, hacking for key, scrubbing down with water, including removal of rubbish/ debris out of the premises at directed place, leaving the premises clean and tidy etc all complete as per specification and direction of EIC. 174 Sqm 0.00 0.00

8 Providing and fixing factory made panel 30 mm thick pre laminated PVC door shutters of approved make such as Rajshri, Sintex, Ecocell or as approved consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's drawing and specification. 59 Sqm 0.00 0.00

Rebate offered in % on Total

Sub Total after rebate (if any) 0.00

GST @ 18% on sub total 0.00

Welfare cess @1% on sub total 0.00

Grand total 0.00