PROVN OF ELECTRONIC WEIGH BRIDGE 40 MT WITH ALL ACCESSORIES AND CIVIL WORKS TO SDP AT AHMEDABAD

Amount

Surface excavation n.exe (not exceeding) 30cm deep & averaging 15cm deep & getting out in hard /dense soil comple all as directed

Excavating in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, esspits, manholes, pier holes, etc. nexc 10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil

Excavating in trenches, not exceeding 1.5m wide and for foundation, etc or not exceeding 10 Sqm on plan and exceeding 1.5m but not exceeding 3.0 min depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete.

Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete.

M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable complete.

M&L for Sand filling under floors or in foundations including watering and consolidation complete.

Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point complete.

Removing excavated material exe. 250m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point complete

M&l for hardcore of guage n. exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete

M&L for plain Cement concrete1:4:8 type D2 using 40 mm graded stone aggt as in foundation, fillings & mass concrete

M&L for RCC M-25 (design mix) Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns; etc; basement slabs; under-reamed piles and mass concrete complete.

M&L for RCC M-25 (design mix.) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete

M&L for RCC M-25 (design mix.) as in colomn, pillars, piers, post and struts etc complete

M&L for Sub Class 'B' bricks old size, laid dry flat over the cable abutting each other, length of cable equal to width of brick as in protection of cable complete.

M&L for brick work with FLY ASH bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.

M&L for Formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter in rough finished surfaces of concrete complete

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter in rough finished surfaces of concrete complete

M&L for Formwork to sides of pillars, posts, struts, piers, columns & stanchions in rough finished surfaces of concrete complete.

S&F factory made 35 mm thick flush shutter, Solid core , construction with particle board core and plywood face panels commercial type on both sides complete.

S&F 150mm size aluminium anodised, barel tower bolt of extruded section complete.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size complete

S&F 150mm aluminium alloy handles, fabricated type anodised complete

S&F high strength deformed TMT steel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

S&F high strength deformed TMT steel bars 6 to 8 mm dia in stirrups cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165) complete

S&F mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250) quality A complete.

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roofing, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete.

S&F pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings cut to length & bent to shape required, fixed using hot dip galvanised, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete.

M&L 75 mm thick cement concrete type C2 1:3:6 (40mm grade aggregate) as in plinth protection & sealing with bitumenous compund complete.

M&L for providing PCC 1:4:8 type D-2 (40mm graded agg) 100 mm thick ,as in sub base to floors complete.

M&L for providing cement concrete 100 mm thick type B1 1:2:4 (20mm graded aggregate) as in floor, finished even & smooth without using extra cement complete.

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete.

M&L 10mm thick rendering on fair faces of brick work or concrete surfaces of block masonary or concrete surfaces in 1:6, finished even and smooth without using extra cement complete.

M&L for prepararion of new plsatered surface of wall and apply two coat of cement base paint over a coat of primer complete

M&L for pre-pararion of new plsatered surface of wall and two coat of distemper over one coat of alkali resistance primer complete.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sqmm X 2 Core complete

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm X 2 Core complete

S&F LED street light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection & similar to Bajaj cat Ref no. BCLST 20 W LED I code 169829 complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for One light point controlled by one switch complete

All as per Item No 42 above but for One fan point controlled by one switch.

All as per Item No 42 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per Item No 42 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.

All as per Item No 42 above but for one 16 amp socket outlet for controlled by one switch on independent board with conductor cable 2.5 sqmm complete

S&F for 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.

S&F modular switch one way 6 amp 1 module complete

S&F modular switch one way 16 amp 1 module complete

S&F modular socket 6 amp 2/3 pin combined 2 module complete

S&F modular socket 6/16 - 2/3 pin combined 2 module complete

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete

M&L for earthing with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate and shown in EP-3 of SSR Part-I complete

S&F ceiling fan with blades, down rods, electronic regulator and accessories, 230 volts, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete

S&F MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete

S&F MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete

M&L for forming contraction (Dummy )joints 65mm deep X 10mm wide, filled with garde A sealing compound .

Supply, Erection, Installation, Testing and Commissioning of 40 Metric Ton fully electronic pit less (HSN:8423) Weigh Bridge with all accessories & Specifications:- (a) Weigh bridge Structure: 9M x 3M size with IS:2062 material & Anti skid plate (b) Capacity: 40 MT (c) Modern pit less (d) Loadcells : (i) Type of loadcells: Double Ended shear Beam Cup & ball type (ii) No of loadcells : 06 Nos (iii) capacity of loadcells : 30 T (iv) Output type : Digital (v) IP 68 (e) Printer: Dot Matrix with 80 no columns (f) Other Accessories : (i) Personal Computer with Intel 10th Gen Core i3 CPU, monitor Keyboard (ii) Digital Weight Indicator with RS232 Port (iii) UPS with Battery (iv) Junction Box (v) Warranty: 1 yr from date of installation complete

S&F powder coated anodised Aluminium aloy sections windows with frames Series-B (18 mm), side Hung shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass panes 4.80 mm nominal thickness and having shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete.

Met Weigh India

RISING ELECTRICALS

SANJOLI CONSTRUCTION COMPANY

GIRNAR CONSTRUCTION

Shree Builders

nirman construction

M/s Matadeen Ramchandra Agarwal