SPECIAL REPAIRS TO CERATIN HANGARS IN TECH AREA AT AFA HYDERABAD

Amount

B/R PORTION : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance exceeding 1.5 K but not exceeding 5 Km complete all as specified and as directed.

M&L Vitrified Double charged / Dark shade / Ultracharged tiles (any shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L screed bed or bedding layer of 15mm thick in Cement mortar 1:6 for floor finished complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in Epoxy Grout 2 to 3 mm spacer and filled with white cement mixed with matching pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floors,approns laid , bedded and pointed any mortar etc complete all as specified and as directed.

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc incl bulnosing complete all as specified and as directed.

S & F in repairs Vitreous China wash down water closet pan (padstal pattern) white (including 'P' or 'S' trap) with seat cover including connection to drain (or out going pipe and to flushing pipe anti shyphonic pipe etc completely fixed in repairs complete all as specified and as directed.

S & F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.

Supply and fix in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.

Supply and fixing in repair vitreous china wash basin counter sunk type oval shape, 550x400 size (approx) white including 32 mm chromium plated waste fitting , fixing brackets, in granite slab complete all as specified and as directed. Make : Parryware Sepia / Equivalent in Hindware, Cera etc.

S&F in repairs 32/40 mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap and 32 mm dia PVC flexiable waste pipe complete all as specified and as directed.

S&F in repair low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 Bore of pipes in 32mm,as urinal pipe etc complete all as specified and as directed.

S & F in repair Vitreous china urinal half stall type white with grating and union for discharge pipe (excluding flushing cistern) but including urinal pipe etc complete all as specified and as directed.

S&F in repair 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F in repair Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs 15 mm bore Two way Bib taps chromium plated fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe 20 mm outer dia including suitable connector socket complete all as specified and as directed.

S&F in repair 15 mm bore Stop valves / angle valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed for CPVC pipe 20 mm outer dia including suitable connector socket complete all as specified and as directed.

S&F in repair Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mmbore complete all as specified and as directed.

Supply and fixed in repair 15 mm bore Bib taps, brass chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair in PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repairs 15 mm dia Brass chromium plated shower rose 125 mm size fixed complete all as specified and as directed.

S&F in repairs for Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed.

S&F in repairs for Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F in repairs sinks (non megnetik) with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings complete all as specified and directed.

S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls / floor incl taking down old pipes of any description complete all as specified and as directed.

S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floor incl taking down old pipes of any description complete all as specified and as directed

S&F in repair low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 Bore of pipes in 40mm fixed to walls, ceilings or in floors complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed.

S & F in repairs PVC (SWR) bend of 75 mm dia complete all as specified and as directed.

S&F in repairs 110mm bore PVC SWR bend of 110 mm dia complete all as specified and as directed.

S&F in repairs 110mm bore PVC SWR bend with acces door complete all as specified and as directed.

S&F in repairs 110mm bore PVC SWR junction single (single T) equal or unequal with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) 110 mm dia Vent cowl complete all as specified and as directed.

M&L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking down extg pipe complete all as specified including cutting grooves/ holes in brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and as directed.

Supplying and fixing of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking down extg pipe complete all as specified and as directed.

S&F CPVC ball valves, with CPVC lever, screwed both ends to pipes of 20mm bore fixed complete all as specified and as directed.

S & F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000ltr capecity hoisted and fixed in position all as specified with dismantling of old unserviceable tank complete all as specified and as directed.

M&L for 40mm thick Flush shutters with both side deco rative face veneer with lipping/frame to match, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F of Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately.

S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube in opening as per manufacturer instruction complete all as specified and as directed.

S&F for 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed.

S&F of 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S & F for powder coated (Thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators/ grills with one or more rebates including joining cleat for fixing, etc complete all as specified and as directed.

M & L for Powder coated (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters,Sliding/hanging type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,handles,stoppers etc. complete all as specified and as directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete all as specified and as directed.

S&F 5.5 mm thick tinted glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and as directed.

S&F 5.5 mm thick figured/frosted glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and as directed.

M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and as directed.

S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and as directed.

S&F 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed.

S&F for Pressed steel frames (125mmx60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed.

S & F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc complete all as specified and as directed.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified (short type, fighter jet aeroplane shape type) complete all as specified and as directed.

S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified and as directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/ blankets any thickness, incl cover filltets and grids complete all as specified and as directed.

Providing and fixing 12 mm thick semi perforated false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing complete all as specified and as directed.

Dismantling plain or corrugated steel/alluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

S&F Rolled mild structural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde-E) complete all as specified and as directed.

M&L preparation of new steel surfaces of any description exceeding 10 cm width or girth, when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking down existing tar felt, water proofing membrane etc of any description, any type including loose plastering / screed , padding concreate etc if any and removing all loose particles with wire brushes, removing bitumen coating over original RCC slab by grinding, picking, , grinding of mother concrete slab to make surface smooth suitable for applying APP membrane as per manufacturer's instructions, including removal of debries to a distance exceeding 1.5 km but not exceeding 5KM complete all as specified and as directed.

Preparation of surfaces by sweeping cleaning and washing down with water to remove dust and loose particles over RCC slab for providing roof treatment, removal of unserviceable debris to outside MD land, and applying bitumen primer @0.30kg/sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4.0 kg/sqm reinforced with non woven polyster mat weight not less than 160gm/sqm having softening point not less than 140 Degree centigrade longitudinal tensile strength not less than 800N per 5cm tearing strength of 180N (by torch application method) with minimum of 100mm side lap and 150mm end laps by application of torch. Applying a coat blown grade hot bitumen 90/15 over the membrane @ 1.20kg/sqm and applying a coat of silar reflective bitumenous aluminium paint @ 0.1Kg/sqm all as specified and as per manufacturr's instructions. The membrane shall be inserted in to the wall /parapet wherever required. mouth of rainwater pipes, gutters shall be properly treated to avoid ingress of the water complete all as specified and as directed. Note: (i) The rate quoted by the contractor shall be included for dismantling and refixing of PVC water tanks hoisted on roof, taking down and refixing of water tubing and any other fittings on roof as required and no extra shall be paid. (ii) The work shall be carried out complete as per manufacturer’s specifications and application methodology. Execution to be done with authorised trained / skilled applicator of manufacturer as per technical guidance laid by manufacturer. Company guarantee to be given by contractor after completion of water proofing work before payment.

Demolition of RCC of any description complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded aggregate) for slabs incl necessary form work, set in CM 1:4 complete all as specified and as directed. Note :- Reinforcement shall be measured and paid seperately.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Demolition of brick work/PCC Block masonry or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

Taking down cement or cement lime plaster on brick wall / stone walls/concrete surfaces, ceilings etc. including ranking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified and as directed.

M & L complete removal of the existing treatment of any type on walls and applying two coats of plastic/acrylic emulsion on wall surfaces conforming to the following brands : (i) Asian Paints - Apcolite Premium Emulsion (ii) Berger Paints - Easy Clean Emulsion (iii) Nerolac Paints - Beauty Gold/Beauty Smooth Emulsion over one coat of wall primer and one coat of 1.5mm thick wall care putty .The surface will be finished by use of a roller complete all as specified and as directed.

M&L for complete removal of the existing treatment on walls and applying two coats of oil bound distemper over a primer over 1.5mm thick wall care putty on plastered surfaces complete all as specified and as directed.

M&L for complete removal of the existing treatment of any type on ceiling and applying a coat of alkali resistant priming paint followed by two coats of oil emulsion distemper complete all as specified and as directed.

M&L for complete removal of the existing treatment of any type on walls and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over plaster of paris putty of 2 mm thickness over plastered surface complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. (White or Tinted)

E/M PORTION :- M & L for point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic rigid PVC conduit (medium grade), ISI marked with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified and as directed for the following :- Make of cable : Havells/Polycab/Finolex/KEI, Make of Conduit : Precision/Finolex/Polycab/Modi

One Light/E/Fan/W/Fan etc. point controlled by one switch 5/6 Amps.

One C/Fan etc. point controlled by one switch 5/6 Amps.

One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No 93 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed.

Description all as per Item No 93 above but with FRLS PVC insulated copper conductor cable of size 4.0 Sqmm and 4.0 Sqmm for earth continuity conductor green in colour for 20A switch socket complete all as specified and as directed. Note for Item Nos 93 to 95 above : (i) Modular metal flush boxes, Modular White Cover Plates with frames is deemed to be included in the unit quoted rates. (ii) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates. (iii) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

M & L for sub-main wiring alongwith earth wire of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) of minimum size 20 mm dia with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed to the entire satisfaction of complete all as specified and as directed. Make of cable : Havells/Polycab/Finolex/KEI. Make of Conduit : Polycab/Finolex/Modi/Precision.

Description all as per Item No-96 here in before but of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm earth wire complete all as specified & as directed. Note for Item No 96 & 97 above : 1) Two runs of PVC wire, One run of Earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Cost of Modular metal flush boxes (if any for junction inspection) is deemed to be included in the unit quoted rates. 3) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates. 4) Cost of PVC clamps/saddles of appropriate sizes with fixing screws for fixing on walls &/or PVC cable ties etc. for fixing on steel support members (if any) is deemed to be included in the unit quoted rates. 5) The wiring shall be done with proper colour coding using Red, Yellow & Blue Coloured wires only for Phase, Black for Neutral & Green for Earth Wire.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt with Indicator complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab Note for Item No 98 to 101 : Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit complete all as specified and as directed. Make : LUKER, Cat No LT510P or techno-commercially equiv in Havells/Jaguar/Philips.

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed. Make : LUKER, Cat No LT520P or techno-commercially equiv in Havells/Jaguar/Philips.

S & F LED square shape (2' x 2') slim ceiling SURFACE light fitting 40 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Cat No : LKMSRS40N of make Luker or techno-commercially equiv in Havells/Jaguar/Philips.

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz, Noise level < 44 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified and as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Bajaj/Khaitan.

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 450 mm sweep, 1400 RPM or more, Air Delivery not less than 6800 CMH, single phase, 240 Volts, AC, 50 Hz, Noise level < 80 dB with 2 Yrs Guarantee/Warranty and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified and as directed. Make : Havells, Cat No: Turbo Force Neo 1P or techno-commercially equivalent in Usha/Bajaj/Khaitan.

Supply, install, commissioning & testing of Wall Fan High Speed, PVC body suitable for wall mounting, 300 mm sweep, 2350 RPM or more, Air Delivery not less than 70 CMH, adjustable upward & downward tilt, with safety feature of motor protection through thermal overload protection device, oscillation degree 60, single phase, 240 Volts, AC, 50 Hz with & including 2 Years Guarantee and connecting up complete including provision of cable 3 core of suitable size from ceiling rose to fan in flexible hose & making good the disturbed surfaces (if any) complete all as specified and as directed. Make : Havells, Model : Swing Off-White (High Speed) or techno-commercially equivalent in Usha/Bajaj/Khaitan.

Imp Note for Item No 103 to 108 above : (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (iii) Original Purchase Vouchers, Manufacturer's Warrantee/Guarantee Certificates & Test Certificates to be submitted to Engr-In-Charge for checking & record. (iv) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (v) The cost of taking down & transportation of old unsv Light Fittings/E/Fans etc. (if any) to MES storeyard is deemed to be included in unit quoted rates. (vi) Installed E/Fans, W/Fans etc. Warranty card duly signed by the user should be submitted to the Engr-in-Charge (vii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate. (viii) Original Purchase Vouchers, Manufacturer's Warrantee/Guarantee Certificates & Test Certificates to be submitted to Engr-In-Charge for checking & record.

S & F TPN DB, 4 Way, IP43, IK09, Metal double door type 415 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection & taking down old unsv one complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection & taking down old unsv one complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, TPN, C-Series 415 Volts of capacity 16-32 Amps with breaking capacity 10 KA complete all as specified and as directed. (1W+1S) Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S&F single pole & neutral sheet metal enclosure with a two pin & earth plug & socket complete with one single pole MCB, "C" Curve, 10 KA, 20A all as specified & as directed to the entire satisfaction of the Engr-In-Charge complete all as specified and as directed. Note for Item Nos 109 to 114 : Make of MCBs shall be same as the make of MCB DBs.

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed. Note for Item Nos 115 & 116 above : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed. Make of GI Pipe : TATA/Jindal/Prakash Note : On completion of the complete work/job the Contr is to perform earth resistance tests for each earthing job in the presence of the Engr-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/IS then the job is to be redone without any extra cost to the Dept till the results are satisfactory.

Vipin Kumar and Brother (BID ID -3500253)

Rajesh Engineering Consultants (BID ID -3504738)

SHRI SAI ENTERPRISES (BID ID -3505218)