Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.5 Cr
EMD Value
₹9.0 L
Closing Date
17 Nov 2026, 12:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR.DEN2
15 conditions · 3 needing a document upload
Financial Eligibility Criteria (Clause 10.2 of part-I GCC-2022): The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; whereV= Advertised value of the tender in crores of RupeesN= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet (Important Instruction: "The balance sheet and all other financial documents attested/certified by the Chartered Accountants (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference" Vide letter no. CE/Works/ECR/HJP's letter No.ECR-HQ0ENGG (CONT)/ 0009/2025 dtd. 18.11.2025 (ii) Gazette Notification No.1-CA (7)/192/2019, dated 02.08.2019 of the Institute of Chartered Accountants of India, published in the Gazette of India).
Similar nature of work:- Any Civil Engineering works.
11 conditions · 7 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
(a) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. as the case may be. Following documents shall be submitted by the tenderer: - (b) Following documents shall be submitted by the tendeerer in case of Sole Proprietorship Firm; (i) An undertaking that he is not blacklisted or debarred by Railway or any othr Ministry/ Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was /is a partner/member. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (c) Following documents shall be submitted by the tenderer in case of HUF; (i) A copy of notarized affidavit on stamp paper declaring that he who is submitting the tender on behalf of HUF is in the position of Karta of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railway or any other Ministry /Department f Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member f the partnership firm or JV in which HUF was / is a partner/member. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (d) Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013; (i) The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate o Incorporation (iii) A copy of Authorization /power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sing the tender on behalf of the company and create liability against the company. (iv) An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(e) Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under C l a u s e 6 2 o f t h e General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (f) Following documents shall be submitted by the tenderer in case of Partnership Firm: The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. (i) A notarized copy of partnership deed. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022 and clause 18 of GCC-2022. (g) Following documents shall be submitted by the tenderer in case of Registered Society & Registered Trust (i) A copy of the Certificate of Registration (ii) A copy of Deed of Formation (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
An undertaking that the Proprietary firm /Partnership firm/Company /Joint venture (JV) Registered society /Registered Trust /HUF/LLP ect. He is not blacklisted or debarred by Railway or any other Ministry/Department of Gov. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member .Concealment/ wrong information in determination under Clause 62 of the General Conditions of Contract. For detail refer para 6 & 6.1 as above and GCC-2022 .
A copy of Documents against eligibility criteria must be submitted along with the E-tender. No any documents against the same will be entertained in the office of Divisional Railway Manager, Dhanbad or anywhere else at any time. Tender will be decided purely on the basis of documents available/attached with the E-tender irrespective of whether tenderer is working contractor or new. However Railway may ask clarification with respect to document available/attached with the E-tender, if required.
In case, submission of Bid Security in the form of Bank Guarantee, the original Bank Guarantee should be delivered to COS/Bill&Tender/Dhanbad (Official Nominated) before closing date for submission of bids. (i.e. excluding the last date of submission of bids) as per Para 3 (ii) of Sl. No.13 (Bid Security) of the tender document.
GMO:- Improvement of basic amenities in quarters with replacement of damaged door, window of North & South side colony of Gomoh.
253-DHN-2026-27~ECR
253-DHN-2026-27
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹9.0 L
23 Oct 2026
23 Oct 2026
3 Nov 2026
106 items across 2 schedules · ₹5,83,12,834.21 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 1845 | 286.85 | 5,29,238.25 |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 5000 | 14.5 | 72,500 |
| 3 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 7500 | 7.4 | 55,500 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 110.4 | 7,365.15 | 8,13,112.56 |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 8 | 8,364.2 | 66,913.6 |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 7.03 | 10,185.05 | 71,600.9 |
| 7 | cum | 5 | 10,719.3 | 53,596.5 | |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 450 | 766.55 | 3,44,947.5 |
| 9 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 110 | 608.35 | 66,918.5 |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 110 | 804.25 | 88,467.5 |
| 11 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins individually or forming box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%). | cum | 10 | 10,633.8 | 1,06,338 |
| 12 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 50 | 6,882 | 3,44,100 |
| 13 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 8,288.35 | 4,14,417.5 |
| 14 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 750 | 837.85 | 6,28,387.5 |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 7525 | 1,063.45 | 80,02,461.25 |
| 16 | Sal wood | cum | 12 | 1,06,720.85 | 12,80,650.2 |
| 17 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 60 | 2,231.2 | 1,33,872 |
| 18 | Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). | Sqm | 450 | 147.15 | 66,217.5 |
| 19 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 450 | 2,818.5 | 12,68,325 |
| 20 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 5500 | 197.7 | 10,87,350 |
| 21 | 250x10 mm | Each | 500 | 374.35 | 1,87,175 |
| 22 | 125 mm | Each | 500 | 205.1 | 1,02,550 |
| 23 | 300x16 mm | Each | 450 | 260.3 | 1,17,135 |
| 24 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. | Metre | 850 | 481.85 | 4,09,572.5 |
| 25 | Decorative finish (both side wood grained finish) | Sqm | 220 | 3,194.4 | 7,02,768 |
| 26 | With 2nd class teak wood beading 62X19 mm | Sqm | 275 | 1,404.25 | 3,86,168.75 |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 900 | 111.95 | 1,00,755 |
| 28 | Using flats 30x6mm for diagonal braces and central cross piece | Sqm | 300 | 4,615.15 | 13,84,545 |
| 29 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 900 | 142.3 | 1,28,070 |
| 30 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 1500 | 545 | 8,17,500 |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 2750 | 935.6 | 25,72,900 |
| 32 | Size of Tile 600 x 600 mm | Sqm | 3200 | 1,286.6 | 41,17,120 |
| 33 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 205 | 2,589.9 | 5,30,929.5 |
| 34 | In 75x75 mm deep chase | Metre | 25 | 260.2 | 6,505 |
| 35 | 75 mm diameter | Metre | 450 | 213 | 95,850 |
| 36 | 110 mm diameter | Metre | 890 | 319.75 | 2,84,577.5 |
| 37 | 75x75x75 mm | Each | 10 | 141.55 | 1,415.5 |
| 38 | 110x110x110 mm | Each | 25 | 205.45 | 5,136.25 |
| 39 | 75 mm bend | Each | 30 | 91.8 | 2,754 |
| 40 | 110 mm bend | Each | 132 | 132 | 17,424 |
| 41 | 75 mm Shoe | Each | 30 | 81.1 | 2,433 |
| 42 | 110 mm Shoe | Each | 150 | 115.95 | 17,392.5 |
| 43 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 450 | 671.55 | 3,02,197.5 |
| 44 | 1:4 (1 cement: 4 fine sand) | Sqm | 6500 | 294.85 | 19,16,525 |
| 45 | 12 mm cement plaster | Sqm | 1200 | 386.55 | 4,63,860 |
| 46 | 1:3 (1 cement : 3 fine sand) | Sqm | 1200 | 253.05 | 3,03,660 |
| 47 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 2200 | 214.3 | 4,71,460 |
| 48 | Two coats | Sqm | 5000 | 121.55 | 6,07,750 |
| 49 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 2300 | 20.85 | 47,955 |
| 50 | One or more coats on old work | Sqm | 8000 | 86.55 | 6,92,400 |
| 51 | One or more coats on old work | Sqm | 58000 | 50.6 | 29,34,800 |
| 52 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | Sqm | 17000 | 94.15 | 16,00,550 |
| 53 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 6000 | 111.6 | 6,69,600 |
| 54 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. | Sqm | 400 | 540.35 | 2,16,140 |
| 55 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | Litre | 20000 | 0.4 | 8,000 |
| 56 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. | Each | 400 | 89.45 | 35,780 |
| 57 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm | Metre | 500 | 285.9 | 1,42,950 |
| 58 | Orissa pattern W.C Pan of size 580x440 mm | Each | 50 | 3,850.65 | 1,92,532.5 |
| 59 | 3 mm thick | Sqm | 21000 | 563.5 | 1,18,33,500 |
| 60 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 55 | 2,007.1 | 1,10,390.5 |
| 61 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 45 | 2,928.1 | 1,31,764.5 |
| 62 | In cement mortar | cum | 56 | 1,698.45 | 95,113.2 |
| 63 | Of area 3 sq. metres and below | Each | 300 | 302.7 | 90,810 |
| 64 | Of area beyond 3 sq. metres | Each | 300 | 414.55 | 1,24,365 |
| 65 | Channels, angles, tees and flats | Kg | 200 | 1.9 | 380 |
| 66 | For thickness of tiles 10 mm to 25 mm | Sqm | 220 | 60.5 | 13,310 |
| 67 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Each | 50 | 744.6 | 37,230 |
| 68 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 2500 | 45.05 | 1,12,625 |
| 69 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 600 | 219.35 | 1,31,610 |
| 70 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Each | 28 | 1,404 | 39,312 |
| 71 | 510x1040 mm bowl depth 225 mm | Each | 200 | 6,677.4 | 13,35,480 |
| 72 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 50 | 1,018.05 | 50,902.5 |
| 73 | 20 mm nominal dia Pipes | Metre | 1200 | 513.75 | 6,16,500 |
| 74 | 25 mm nominal dia Pipes | Metre | 850 | 626.05 | 5,32,142.5 |
| 75 | 25 mm nominal dia Pipes | Metre | 600 | 370.65 | 2,22,390 |
| 76 | 40 mm nominal dia Pipes | Metre | 164 | 559.2 | 91,708.8 |
| 77 | 50 mm nominal dia Pipes | Metre | 222 | 811.85 | 1,80,230.7 |
| 78 | 25 mm nominal bore | Each | 140 | 532.35 | 74,529 |
| 79 | 40 mm nominal bore | Each | 5 | 707.3 | 3,536.5 |
| 80 | 50 mm nominal bore | Each | 5 | 878.25 | 4,391.25 |
| 81 | 25 mm nominal bore | Each | 4 | 399.15 | 1,596.6 |
| 82 | 20 mm nominal bore | Each | 150 | 289.05 | 43,357.5 |
| 83 | 25 mm nominal bore | Each | 150 | 369.35 | 55,402.5 |
| 84 | 40 mm nominal bore | Each | 6 | 523.2 | 3,139.2 |
| 85 | 50 mm nominal bore | Each | 6 | 706.7 | 4,240.2 |
| 86 | 15 mm nominal bore | Each | 300 | 715.05 | 2,14,515 |
| 87 | 15 mm nominal bore | Each | 300 | 594.75 | 1,78,425 |
| 88 | 15mm nominal bore | Each | 300 | 500.35 | 1,50,105 |
| 89 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. | Each | 300 | 61.7 | 18,510 |
| 90 | 150 mm diameter S.W. pipe | Metre | 100 | 1,095.15 | 1,09,515 |
| 91 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | Kg | 720 | 474.7 | 3,41,784 |
| 92 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | Kg | 625 | 573.4 | 3,58,375 |
| 93 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 20 | 516.6 | 10,332 |
| 94 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 140 | 7,510.75 | 10,51,505 |
| 95 | For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. | Metre | 1500 | 469.65 | 7,04,475 |
| 96 | 25 mm average thickness | Sqm | 750 | 104.6 | 78,450 |
| 97 | Bars upto 12 mm diameter | Metre | 750 | 6.65 | 4,987.5 |
| 98 | Upto and including 12mm dia. | Each | 800 | 121.95 | 97,560 |
| 99 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | Sqm | 750 | 390.45 | 2,92,837.5 |
| 100 | 12 mm average thickness. | Sqm | 750 | 333 | 2,49,750 |
| Schedule total | ₹5,78,92,834.21 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Instructiontotenderers-USSORDSR-2021MSOP-2018GCC-April-22uptoCorrec.Slip-12.pdf
ATTACHMENT
DiggingJPOdt.15.05.2024.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .