REPAIRS TO PLUMBING, PLINTH PROTECTION, ROLLING SHUTTER AND ALLIED WORKS AT AFS BIDAR

Amount

S&F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all as specified and as directed.

S&F in repair Viterous china Closet constellation with cistern size 82cmx38cmx70cm, 'P' OT 'S' Trap coloured as required complete all as specified and as directed.

S&F in repair Vitreous china squatting Pan 'Orrisa' Pattern size 580 x 440 mm white with integral foot rest , P or S Trap, and lime concrete bedding including making good disturbed surfaces complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed.

S&F in repairs Stainless steel sink made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed.

S&F in repairs Stainless steel sink made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed.

S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a pair of angle iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3, complete all as specified and as directed

S&F in repairs Wash basin oval shape counter top, coloured including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed.

GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 15mm dia bore including taking down old steel tubing complete all as specified and as directed.

S&F GI tubing medium grade with necessary fittings fixed to walls and ceiling or laid in floors, 20mm dia bore including taking down old steel tubing complete all as specified and as directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, glossy finish complete all as specified and as directed.

S&F in repairs Health Faucet with 1.0 m tube & hook of brass, glossy finish complete all as specified and as directed.

S&F in repairs 15mm bore angle stop cock of chromium plated / brass, glossy finish complete all as specified and as directed

S&F in repairs 15mm bore pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore mixer for mixing hot & cold water pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm dia Pillar tap swan neck of brass, glossy finish complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed.

S&F in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated complete all as specified and as directed.

S&F in repair Plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and as directed.

S&F Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms), 20mm tank nipple including dismantling of existing water tank complete all as specified and as directed.

S&F Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms), 20mm tank nipple including dismantling of existing water tank complete all as specified and as directed.

Cleaning and removal of scale and dirt etc from tanks of capacity exc 250 but n.exc 500 ltr and from mouths of circulating pipes etc complete all as specified and as directed.

Cleaning and removal of scale and dirt etc from tanks of capacity exc 500 but n.exc 1000 ltr and from mouths of circulating pipes etc complete all as specified and as directed.

S&F in repairs PVC OH tank covers of suitable dia complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single, (Single 'T') 110mm dia equal or unequal with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single, (Single 'T') 75mm dia equal or unequal with access door complete all as specified and as directed.

S&F in repair PVC (SWR) branch piece, (Single 'Y') 110mm dia equal or unequal with access door complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in floor etc. complete removal of debris outside MD land complete all as specified and directed.

Plain cement concrete 1:3:6 type C2 by using 40 mm graded stone aggregate,75 mm thick as in plinth protection / path / Hard standing , finished the surfaces even and smooth without using extra cement including necessary form work complete all as specified and as directed.

Plain cement concrete 1:3:6 type C2 by using 40 mm graded stone aggregate,100 mm thick as in plinth protection / path / Hard standing , finished the surfaces even and smooth without using extra cement including necessary form work complete all as specified and as directed.

Cement concrete 1:2:4 type B-0 using 12.5mm gradded aggregate as in coping, rounded or chamfered on edges including necessary form work complete complete all as specified and directed.

Demolition of brick work/PCC block masonry built in cement mortar complete all as specified and as directed.

Pre-cast cement concrete block masonry with solid blocks built in 1:3:6 type-C1 concrete (using 20mm graded stone aggregate), exc. 10cm in width and setting in mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Granite (of any type) 18-20 mm thick, work table, rubbed and polished in steps, jambs, piller, window cills, cooking platforms and like including pointing in white cement (1:2), with admixtures of pigment to match with shade of granite complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone wall, or any description etc including, racking out joints, hacking for key scrubbing down with water etc. complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Steel Rolling Shutters made out of 1.00mm thick laths, gear operated type, with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete including taking down existing unserviceable rolling shutters complete all as specified and as directed.

Preparation of new Steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down carefully hood and steel rolling shutters of size up to 20 sqm each and refixing in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling , replacement of rusted nut, bolt etc.,removing of bends & making alignment , denting, tension to spring, making smooth functional of rolling shutter and making good disturbed surfaces including preparation of old painted surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F in repairs helical spring of 60cm long of rolling shutter complete all as specified and as directed.

S&F in repairs ball bearing of rolling shutter complete all as specified and as directed.

Welding in repairs n.exc 2.5cm in length and n.exc 6mm thickness of metal including cleaning and preparing the surface complete all as specified and as directed.

NAYANA CONSTRUCTIONS (BID ID -3064666)

Siddique constructions (BID ID -3055996)

M/s.Santosh Kotarki (BID ID -3064324)

AMAR CONSTRUCTION (BID ID -3057218)