REPAIR TO LT CABLE PANELS AND CONNECTED ITEMS AT ZONE A UNDER GE AHMEDABAD

Amount

Supply, errect, test and commissioning Bus bar feeder pillar box of CPRI approved factory fabricated,dust & vermin proof including removal cable entry gland plate, powder coated 440 volts, 3 phase, 4 pole, 50 cycles outdoor type weather proof made out of 3mm thick MS sheet, with incommer and outgoing through Bus bar, with angle iron legs of Suitable size and thickness of sheet 3.15mm, hinged door, locking arrangement with aluminium bus bar 400 Amps capacity,LED indicating lamp for RYB grouted, PCC 1:3:6 type C1 and duly powder coated painted with two coats of synthetic enamel paint over one coat of primer comprising the following:-(Drg / design of Panel shall to be approved by Engr-in-charge before given order to concern factory ) (i) Incoming:- One number MCCB 250 amp, 4 pole, Ics 25 KA, 415 volts, 50 Hz with Incoming:- One number MCCB 250 amp, 4 pole, Ics 25 KA, 415 volts, 50 Hz with Complete

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe dia 80 mm & inner pipe dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth strip 32 x 6 mm, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete. (Note - GI strip size 32x6 mm upto 7.5 m included in the item).

Capacitor 415 V, AC 3Ø, 5 KVAR

Capacitor 415 V, AC 3Ø, 10 KVAR

Capacitor 415 V, AC 3Ø, 15 KVAR

Capacitor 415 V, AC 3Ø, 25 KVAR

MCB four pole 40 to 63 amps, 10 KA, 'C'

S&F replacement of High break HBC fuse link 315 Amps to 425 Amps,80kA,50Hz.

CT Coil class 1.0 of any CT ratio not exceeding 150/5 as required.

S&F Digital APFC Relay complete

S&F Contactor 10-40Amp for APFC Panel any capacity complete

Material and labour for servicing, repairing and welding to out door LT Panel / LT Feeder Piller box by (i) Cleaning with blower, (ii) Cleaning with CTC/Petrol (iii) Replacement of damaged copper/aluminium lugs (iv) Replacement of deteriorated copper wiring with existing sizes of cable (v) Cleaning and tightening of MCCB terminals (vi) Replacement and fixing of sheared rubber beadings (vii) Rectifying of loose connections of incoming and outgoing cables (viii) Painting two coat of smoke gray colour over one coat of primer and black paint on base channel after rubing with emery paper and making smooth finishes (ix) Providing of door locking arrangement with of sliding bolts on panel door (x) Proper welding of Panel door/roof as required (xi) Connecting / cleaning of earth wire /earth strip (x) Two coat of white distemper on foundation.

S&F Digital AC voltmeter, 4 digit, 7 segment LED display, square type, input voltage 50 -480VAC including dismantling of unserviceable voltmeter and connecting the cable as per requirement on existing panel

S&F Digital AC Ammeter 4 digit, 7 segment LED display, square type input voltage 50 -480VAC including dismantling of unserviceable ammeter and connecting the cable as per requirement on existing panel.

S&F LED indication camps R/Y/B with base including dismantling of unserviceable indication lamp on existing panel and connecting up the cables complete.

Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete. Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.

300 sqmm 3.5 core.

240 sqmm 3.5 core.

185 sqmm 3.5 core.

150 sqmm 3.5 core.

120 sqmm 3.5 core.

95 sqmm 3.5 core.

70 sqmm 3.5 core.

50 sqmm 3.5 core.

35 sqmm 3.5 core.

25 sqmm 4 core.

16 sqmm 4 core.

16sqmm 2 core

10 sqmm 4 core

10 sqmm 2 core

Excavation in trenches in any type of hard/dense soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 (part 24) : 2017 Part II of outer dia 50 mm and inner dia 38 mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 (part 24) : 2017 Part II of outer dia 77 mm and inner dia 63 mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 (part 24) : 2017 Part II of outer dia 120 mm and inner dia 103 mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete

S&F in replacement Switch disconnector (Load break Switch) 415V, AC, 3Pole, 800 Amps capacity in existing panel with nut, bolts, thimbles and taking down old u/s load break switch & similar to Cat No CSSD800K3T (50x6) of C&S complete

Steel tubes ISI marked light grade galvanised with all fittings fixed to walls / poles as required of following sizes:-.

40 mm bore

80 mm bore

S&F of PVC insulated & sheathed, multistranded copper conductor industrial cable 1.5 sqmm three core 1100 volt grade all as specified complete

M&L for taking out of unserviceable LT cable XLPE, aluminium armoured type up to 25 Sqmm 4 core from existing complete

M&L for taking out from site of unserviceable LT cable XLPE, aluminium armoured type 35 Sqmm3.5 core to 300 Sqmm 3.5 Core core from existing complete

Labour & tools for horizontal boring through road / path / floor for passing UG cables by using trench less technology for laying upto 100mm dia GI pipe complete all as required. Note : GI pipe will be measured and paid seperately.

Material and labour for dismanteling old straight through LT Cable joint kit out door type suitable for following sizes of aluminium conductor complete

10Sqmm 2 Core, 1100 volts Complete

16 Sqmm 4 Core, 1100 volts Complete

25Sqmm 4 Core, 1100 volts Complete

35Sqmm 3.5 Core, 1100 volts Complete

50Sqmm 3.5 Core, 1100 volts Complete

70 Sqmm 3.5 Core to 95Sqmm 3.5 Core, 1100 volts Complete

120 Sqmm 3.5 Core to 150Sqmm 3.5 Core, 1100 volts Complete

185 Sqmm 3.5 Core to 240Sqmm 3.5 Core, 1100 volts Complete

Labour and tools for cleaning of sub station open areas, removing grass, shrub, roots, brickbats etc by surface excavation not exceeding 30 cm deep, leveling the area complete.

M&L for spreading 40 mm graded stone aggregate deposited, spread and levelled in layers not exceeding 15 cm thick through out the sub station / out door panel foundation in open areas complete.

Supplying and fixing MCCB 25 to 100 63 amp, 3 pole, with breaking capacity 16 K Complete

Supplying and fixing MCCBs 125 amp, 3 pole, with breaking capacity 16 K Complete

Supplying and fixing MCCBs 160 amp, 4 pole, with breaking capacity 36 K Complete

Supplying and fixing MCCBs 250 amp, 4 pole, with breaking capacity 36 K Complete

Supplying and fixing MCCBs 350 amp, 4 pole, with breaking capacity 36 KComplete

Supplying and fixing MCCBs 400 amp, 4 pole, with breaking capacity 36 K Complete

Supplying and fixing MCCBs 500 amp, 4 pole, with breaking capacity 36 KComplete

Supplying and fixing MCCBs 600 amp, 4 pole, with breaking capacity 50 K, Complete

Shree Krushna Supply Corporation

Electricals India

Abhishek Enterprises

ALBA AC AND REF SERVICES

MAA PUNAGRI ENTERPRISE