Construction of RWS&S Sub Division Office Building at Parchur Village in Parchur Mandal of Bapatla District.Est.Cost.30.00 Lakhs

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring, strutting, sheeting, planking and dewatering cost of hire charges of T&P labour charges etc. complete for fineshed iem of work for fondation of building For Footings

Filling with Stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc, hire charges of T & P etc., complete for finished item of work

Plain Cement Concrete (1:4:8) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete For Footings

M-20 Nominal mix 4 RCC corresponding toTable 9 of IS 456 using 20mm size graded machinecrushed Cement:fine aggregate:coarse aggregate)hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finisheditem of work but excluding a) for Column Footings

M-20 Nominal mix 4 RCC corresponding toTable 9 of IS 456 using 20mm size graded machinecrushed Cement:fine aggregate:coarse aggregate)hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finisheditem of work but excluding a) for plinth beams

Nominal mix RCC M-20 (Cement:fineaggregate:coarseaggregate) corresponding to Table 9 of IS 456 using 20mm size graded machinecrushed hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finisheditem of work but Columns upto Plinth including Basement Height

Nominal mix RCC M-20 (Cement:fineaggregate:coarseaggregate) corresponding to Table 9 of IS 456 using 20mm size graded machinecrushed hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for lintels

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 350 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication & seigniorage charges for 60cm wide sun-shades of 75mm thick at fixed end and 50mm thick at free end with an average thickness of 62.5mm, and Lofts. (As per BLD-CSTN) Sunshades of 0.60 mt wide Windows W1For Doors D1

RCC M-20 Nominal (Cement:fineaggregate:coarseaggregate) corresponding to Table 9 of IS 456 using 20mm size graded machinecrushed hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finisheditem of work but excluding. For Roof Beams

RCC M-20 Nominal (Cement:fineaggregate:coarseaggregate) corresponding to Table 9 of IS 456 using 20mm size graded machinecrushed hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finisheditem of work but excluding For Slab 125 mm thick Complete over roof

RCC M-20 Nominal (Cement:fineaggregate:coarseaggregate) corresponding to Table 9 of IS 456 using 20mm size graded machinecrushed hard granitemetal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fineaggregate (sand) coarse aggregate, wate retc., to site and including Seigniorage charges, sales &other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finisheditem of work but excluding For Waist Slab 150 mm thick

Providing HYSD Bars for Rainforcement infoundation and for superstructure including Cost and Conveyance of all materials, etc complete

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For superstructure For External Walls

Reinforced 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.Internal Walls

PCC(1:3:6) using 20mm size HBG (SS-5) metal from approved quarry (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges.Bed blocks under hold fasts, lintels for doors, windows and ventilators

Ornamental plastering to Ceiling 12mm thick in CM (1:3) with dubara sponge finish, mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work.

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:3), 4mm thick with Dubara sponze finishing for external walls, GROUND FLOOR

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:6), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing for internal walls. GROUND FLOOR