PROVN OF TOILET CUM BATHROOM, PARKING SHED, DEFICIENT GEYSERS AND EXHAUST FANS AND SPECIAL REPAIRS TO EXTERNAL WATER SUPPLY AT MISSAMARI UNDER GE MISAMARI

Amount

Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) n.exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) exc. 250.00 Metre and n. exc. 500 meter depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L for cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed.

M&L for cement Concrete 1:2:4, Type B2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed.

M&L for reinforced Cement Concrete M-25(20mm graded stone aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for reinforced Cement Concrete M-25(20mm graded stone aggregate) in columns, pillars, piers, post and strut, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for reinforced Cement ConcreteM-25 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for reinforced Cement ConcreteM-25 (20mm graded stone aggregate) as in chajjas, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L for formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L for formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L for formwork to chullah hoods, chajjaa, troughs and similar item including edges etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L for brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for brick work with sub-class ‘B’ Bricks Straight or Curved on Plan to any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed.

M&L for rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick or concrete Surfaces , plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plinth protection and finishing surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.esc 25 cm thick, complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for 100mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes, complete all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment, complete all as specified and directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched(ordinary and counter) forming holes, with riveted bolted or welded attachment Fe-410-W(Gde-E-250) quality A, complete all as specified and directed.

S&F 12 mm dia of neck mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long. complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L for preparing new Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer, complete all as specified and as directed.

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for 40mm thick Cement Concrete Type B0 1:2:4 (12.5mm graded aggre-gate) as in Damp Proof Course to horizontal or vertical surfaces including necessary formwork using wpc@3% of weight of cement including necessary formwork, complete all as specified and as directeed. NOTE : WPC will be measured and paid as ‘Supply only’ under appropriate Item.

Supply only Integral Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified and as directed.

M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L for glazed ceramic coloured tiles, glossy finished of size 350x450x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F for PVC ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405(40x46mm)(3 mm pin headed glass using extruded PVC section having dia of 0.9x14.5mm EDPM gasket, complete all as specified and directed.

S&F Aluminium anodised Barrel Tower Bolt 150 mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed, complete all as specified and as directed.

S&F mild Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Fancy Type, Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F Stop Cock 15mm bore, Cast Copper Alloy, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

S&F10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed..

S&F vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M&L for vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed.

S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms), complete all as specified and as directed.

S &F Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm white minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (miniumum weight 60 gms), complete all as specified and as directed.

S&F PTMT grating Doom 100mm dia (minimum weight 25Grams) complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore (dia) Soil, Waste and Ventilating Pipe, double Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

M&L for 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore (dia) Bend any type, and jointing with Solvent Cement , complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity white in colour (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in SSR part-1, complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M&L for cement concrete Bed 1:3:6 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

M&L for Salt-Glazed Stone-ware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches, Jointed with Cement Mortar 1:1 and testing, complete all as specified and as directed.

M&L for Cutting into existing manholes 150mm dia of internal pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

M&L for providing and injecting chemical emulsion anti termite treatment of soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12mm dia, holes with cement mortar 1:2 to match existing floors complete.

M&L for providing and injecting chemical emulsion for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc, in apron.

M&L for Point Wiring with 2.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 2.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly, complete all as specified and as directed.

M&L for Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per item No. 76 here in before for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

S&F heavy duty exhaust fan 300 mm sweep MS body, 3 wing 1400 rpm, single phase 240 volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC coper wire run through flexible pipe. Single phase type.

S&F water heater, geyser storage type, suitable for working on single phase 240 Volt AC supply Cap 25 Ltr, 5 star, 2 KW complete all as specified and directed. Make : USHA, Model- MISTY or equivalent in Havells/Racold/Bajaj/AO Smith/Jaguar

S&F Switch Socket Combination, Flush type, 3 Pin, 16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and as directed.Make Havells, Cat No: LHLDEUEBML8Z010 or equivalent in Philips/Bajaj/GE/CG.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar, 4 way double door openable complete all as specified and as directed.

S&F MCB Double Pole, 32 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make- L&T, Cat No: BB20320B, BB20320C or equivalent in Schinder/Legrand.

S&F MCB SP,6 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No:BB10060B or equivalent in Schinder/Legrand).

S & F wall mounted LED 18 watts , batten type T-8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make- Havells Model -REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight or equivalent in Philips/Bajaj/GE/CG.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in Philips/Bajaj/GE/CG.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

All as per Item no.94 here in before but for 20 mm, complete all as specified and directed.

All as per Item no.94 here in before but for 25 mm, complete all as specified and directed.

Cutting & making hole for exhaust fan fitment with making good surface and matching the existing colour on wall.

S&F Nuts and bolt along with suitable washer for fixing of item No. 75 & 76 complete all as specified and directed.

M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below ground level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal ground level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/ DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150 mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded aggre gate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8.0mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including removal old existing unserviceable Earthing, complete all as specified and as directed.

S&F 3 layered(Outer green coloured UV stabalized,middle black coloured UV stabalized and inner most layer white coloured with antimicrobial property) PP-R (Polypropyelene random copolymer) pipe 40mm outer dia,ISI marked,SDR 7.4 and SDR11 UV stabalised and antimicrobial fusion welded having thermal stabality for hot and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in treanches, complete all as specified and directed.

S&F 3 layered(Outer green coloured UV stabalized,middle black coloured UV stabalized and inner most layer white coloured with antimicrobial property) PP-R (Polypropyelene random copolymer) pipe 32mm outer dia,ISI marked,SDR 7.4 and SDR11 UV stabalised and antimicrobial fusion welded having thermal stabality for hot and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in treanches, complete all as specified and directed.

S&F PP-R gate valve (Brass insert) 32mm outer dia and fixed including taking down of existing unserviceable one, complete all as specified and directed.

S&F PP-R gate valve (Brass insert) 50mm outer dia and fixed including taking down of existing unserviceable one, complete all as specified and directed.

M&L for connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 40x32 mm including cutting and making fusion joint etc, complete all as specified and directed.

Taking up or down galvanised steel tubing 25/32 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Taking up or down galvanised steel tubing 40 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Taking up or down galvanised steel tubing 50 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Taking up or down galvanised steel tubing 80 mm bore including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed.

Taking up old cast iron water mains 100 mm bore with all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead. Serviceable Pipes Leads etc keep in safe custody for reuse,etc complete all as specified and as directed.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 100mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-7 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed Note- 1.Excavation and DI Specials shall be measured and paid separately . 2. Rate of rubber gasket is deemed to be included in unit quoted rate

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 90 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Note - Excavation shall be measured and paid separately

All as per item no. 111 but for 63 mm dia, complete all as specified and as directed.

All as per item no. 111 but for 50 mm dia, complete all as specified and as directed.

All as per item no. 111 but for 40 mm dia, complete all as specified and as directed.

All as per item no. 111 but for 32 mm dia, complete all as specified and as directed.

S & F in repair PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property )fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 50 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.

S & F in repair PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property )fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 40 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.

M&L in repair Cast Iron Sluice Valve 100 mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.

DI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for Pipe upto 300mm bore and including taking down complete all as specified and as directed.

M&L for construction Brick Masonary valve pit of size 900x900x900 mm ( internal dimention) one each brick thick wall in cement mortar 1:4 on 100 mm thick PCC 1:4:8 ( 40mm graded aggre-gate) in job foundation, renderring 15mm thick internally and externally upto 150mm below GL , providing 3.15 mm thich MS Sheet valve pit cover , welded with 40x5mm flat iron frame all round including provision of hinges, handle with locking arrangement and 40x40x6 mm angle iron frame fixed on top of value pit by means of hold fast 150mm long, embedd-ed in PCC 1:2:4 20 mm graded aggregate bolck of size 230x200x100mm applying two coats of anti- corrosive paint to all expossed steel surface over a coat of red oxide zinc chrome primer after preparation of surfaces and necessay earth work in soft/ loose soil including demolition of unserviceable value pit, complete all as specified and as directed.

Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 150 mm bore (dia) for passing of pipes, complete all as specified and as directed.

M&L for 100mm thick PCC type B2 1:2:4 using (40mm graded aggregate) as in sub base, complete all as specified and as directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete wall and ceiling or laid floor, complete all as specified and as directed.

S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floor, complete all as specified and as directed.

S&F 25mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floor, complete all as specified and as directed.

SHANKAR ENTERPRISE

M/S Himalayan Trading Co

LAXMI & GANESH ENTERPRISE

MAC ENGINEERS

BEE KAAY TRADERS