Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | L1 | Accepted-AOC L1 Contractor | |
| 2 | L2₹5.3 L+₹1,205 (0.23%)Rejected-AOC EDOLIKUNNATH H CHENNAMANGALUR PO MUKKAM VIA CALICUT 673602 | KOZHIKODE | KERALA | 673602 | L2 | Rejected-AOC Not L1 Contractor | |
| 3 | L3₹5.8 L+₹47,815 (8.99%)Rejected-AOC | L3 | Rejected-AOC Not L1 Contractor | |
| 4 | Rejected-Technical | - | Rejected-Technical Not qualified |
Tender Value
₹5.4 L
EMD Value
₹10,800
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director
NIT, Calicut, Kerala - 673601
Providing aluminium partition in room no 102 and 207 of chemical engineering department 2022 - 23
2022_NITC_731126_1
Engg/D1/236/2022-23
Open Tender
Civil Works
Item Rate
15 days
Calicut
Please refer Tender documents.
8 documents required · 8 mandatory
₹590
Director, NIT Calicut
₹10,800
Yes
25 Jul 2023
23 Dec 2022
11 Jan 2023
23 Dec 2022
9 Jan 2023
23 Dec 2022
Amount
Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Providing and laying in position cement concrete of grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)excluding the cost of centering and shuttering - All work up to plinth level
Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Solid concrete block (75kg/cm2) masonry in cement mortar 1:6 using concrete brick of size 40x20x12cm upto plinth level including cost and conveyance of all materials and labour charges etc. complete.
Providing and fixing 18mm or nearest thick mirror polished granite slab any colour and shade for display board/table top moulding and polishing to edges to give high gloss finish etc complete(Area of slab over 0.50 sqm) as per the design approved by the engineer-in-charge
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and fixing high quality ISI marked stainless steel auto soft close hinges of specified size with stainless steel screws etc. complete
Providing and fixing IS : 3564 aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing aluminium tower bolts 150x10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing 100x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing 125 mm aluminium powder coated handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing Single aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
Providing and fixing double strip magnetic catcher (horizontal type)high quality ISI marked of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
Providing and fixing powder coated heavy duty telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in charge.
Providing and fixing 12 mm thick marine plywood gurjan or equvalent confirming to IS:710 for cupboards, shelves, partition, drawers, table top etc. including necessary screws etc. complete.
Providing and fixing bright /matt finished 100 mm Stainless Steel handles of approved quality & make with necessary screws etc all complete.
Steel work in built up GI tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Providing GI powder coated trafford sheets 0.50mm or nearest available thick with GI bolts and nuts plate washers and bitumin washers, M seal and 150mm overlap at ends including cost and conveyance of all materials and labour charges etc.complete
Providing and fixing 8mm PVC sheet ceiling or nearest available thick on anodized alumminium frame work fixed with iron screws on nylon sleeves etc. including cutting and fixing the PVC sheet on frame with screws providing holes for fan hooks, platform scaffolding for required height wherever necessary including cost and conveyance of all materials and labour charges etc. complete as per the direction of Engineer-in-charge. (Cost of Aluminium Sections and framework will be paid seperately)
Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.
Finishing with Epoxy paint two or more coats on steel work at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.
Painting with two or more coats synthetic enamel paint using brush/roller on new work of approved brand and manufacture to give an even shade :
Providing and applying best quality wood putty of approved brand and manufacturer, including cost for thinner, over wood surface to prepare the surface even and smooth complete
Wall painting with two coat premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre asper instruction of engineer in charge
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required
Providing and fixing white vitreous china laboratory sink of size 600x450x200 mmwith C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :
Providing and fixing 20 mm nominal outter dia PVC pipes (1/2") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
Providing and fixing 32 mm nominal outer dia PVC pipes (1") (10kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
Supplying and fixing SS Three way swan neck type tap for laboratory including cost and conveyance of all materials and labour charges etc complete
Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for fixed portion of doors, windows ,sliding windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)(Glazing, paneling and das
Providing and fixing 4 mm thick Aluminium Partition Panels, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Providing and fixing white sun control film on glass including cost and conveyance of all materials and labour charges etc. complete.
Providing and fixing anodized aluminium box section (not less than 0.299kg/m) frame work for ceiling, including hanging in RCC slab or truss with aluminium sections at suitable intervals, fixed to wall with steel screws on nylon sleeves etc. including cost and conveyance of all platform scaffolding for required height wherever necessary, materials and labour charges etc. complete as per the direction of Engineer-in-charge.
Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
E K IBRAHIMKUTTY
HARISH KUMAR CP
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .