PROVISION OF MODULAR KITCHEN IN TYPE-V QTRS AT ICGS VADINAR, MODULAR KITCHEN AT SHIPS GALLEY AT CGAE AND UTILITY DESIGNER RACK AND CABINET FOR GALLEY / PANTRY OF NEW OFFICER MESS AT CGDHQ-1 PORBANDAR UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Supply and fixing of Modular Kitchen cabinet in side wall of size given in (Drawing No. GICG/PBR/DHQ/WD/63/2021) attach and drawer ,shelf of 18 mm thick Plywood- Water proof with 1 mm thick both side laminate inside white and outside as per approved shade and accessories, aluminium profile handle complete all as specified and directed. Note : Hardware will be Hettich/FVG Hindware or equivlent complete Provn of cooking platform with RCC shelf and 18 mm thick granite on top of platform of size 2.40 x 1.50 x 1.00 mtr Ht complete with arrangement of gas burner including demolition of existing platform compete all as specified and directed by Engr-in-Charge Dishwasher LG / Bosch make 01 Nos ELICA or Hindware make 1 center Chimney 4 Nos HOB single Burner with stand

supply and fixing of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured elctric cable heavy duty 1100 volt grade with stranded aluminium conductor of size 16 sqmm 4 core Make: Polycab/ Havells or equivalent. Note : for Item No1 Removing of interlocking/Paverblocks, tiles and refxing with the same location and making good the distrubed surface is deemed to be included in quoted rate.(ii) Fixing accessories for cable laying such as clamps and nut bolts and thimlbes for connecting the cable is included in the quoted rate.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth and getting out Soft/ Loose soil and including taking out of PCC cable cover and getting out complete all as specified and directed.

Returning filling in incl spreading levelling watering and well Ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply and Lay OD Double Wall Corrugated (DWC) high density polythene pipes of 50/38 mm dia having corrugation on the outer wall and plain surface on the inner wall for protection of underground Cable with all fittings laid in trenches/road/nallah or fixed along wall poles or laid under floor for the following dia (Excavation and earthwork shall be measured and paid separately) complete all as specified and as directed. Make: Rex/Poly/Geminie

Supply,and fixing Distribution Board tripple pole and neutral 4 way with standard bus bar , Din bar , etc suitable for 415 Volts, Double door all as specified and as directed. Make Legrend/C&S/ ABB

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 63 Amp of Four Pole poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make Legrend/C&S/ ABB

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 40 Amp of Four Pole and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make Legrend/C&S/ ABB

Supply and fix Isolator SPN suitable for 40 amps 10 KA C series complete all as specified and directed. Make Legrend/C&S/ ABB

Material & labour for Sub main wiring with two runs of 2.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable,fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25 mm dia (external) but shall be increased as per actual site requirement in accordance,with wall thickness not less than 1.8 mm complete with all necessary fitting and including with conduit accessories and one run of 2.5Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling including taking down old unserviceable sub main wiring complete all as specified and as directed. Make : Anchor/Polycab/ Havells Note : Making good the distrub surface with exsiting colour rate to be deemed to be included in quoted rate.

Supply and fix metal plug socket box with MCB SPN 20 amps and steel enclosure all as specified and as directed. Make Legrend/Siemns/Havells

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 3 to the earthing test point all as specified and indicated including testing on completion complete all as specified and directed.

M&L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil complete all as specified and directed.

S & F of GI steel tubing light grade 40 mm dia for laying in ground and road crossing along the pole in coping etc for cable protection including necessary fittings, clamps for supports complete all as specified and directed. Make - Tata/Jindal/Surya Prakash

Providing and fixing of Cabinet as per (Drawing No. GICG/PBR/DHQ/WD/62/2021) 28Ft with below platform (H-32" W-24" L-348") big size drawers and cabins with self and above platform (H-18' W-12' L-348') small cabinet with aluminium profile shutter. Plywood water proof grees or equivalent with both side 1mm thick laminate in side white laminate and outside as per user requirement. Make : Hardware Hettich or FVG Hindware.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on 18mm thick calibrated plywood of, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L for 18-20mm thick Nano Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in floor including grinding and polishing complete all as specified and as directed by Engineer-in-Charge.

M&L for Nano Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed.

M&L Nano Granite (of any type) tiles 18-20mm thick machine cut, as in skirting/dadoes, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in vertical surfaces over 20mm thick screed bed in CM (1:3) complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed Ceramic tiles in vertical surface 1600x 800x 10m thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm screed bed or bedding layer in 1:3 CM complete all as specified and as directed by Engineer-in-Charge.

S&F Carysill or equivelent faucets swan neck 15 mm dia screwed for iron pipe or for brass ferrule & fixed in repair complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete with waste coupling and waste pipes of suitable capacity all as specified and as directed by Engr-in-Charge Make- Carysill or equivalents

S&F Bosch Chimeny of stainless steel, wall Mounted hoods 90cm long, having suctions , capacity of 800cum/Hrs, rating 4.2 out of 5 stars, DWG098D5OI, 2 Baffle filters , steel/Grey complete all as specified and as directed.

S&F Bosch three Automatic Brass black gas hobes built in tempered glass, automatic gas stove, of dimension 80cm x 78 cm complete all as specified and as directed.

M&L for Stainless steel dustbin of 10 Ltr or more capacity complete all as specified and as directed.

S&F size of grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed.

Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Ditto-but to curved surface complete all as specified and as directed.

Extra over item above for any sunk or curved moulding complete all as specified and as directed.

M&L for preparation of ceiling surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

Modular Kitchen (INOX ACCESSORIES ) S&F PVC Cutleri 600, complete all as specifed and directed by Engr-in-Charge

S&F pullout 300mm, stainless steel complete all as specifed and directed by Engr-in-Charge

S&F SATIN PENTRI , 450mm stainless steel, 12 Basket and in 6 layers complete all as specifed and directed by Engr-in-Charge

S&F for Lift Up Hydrolic gas spring 100N (10kg load capacity) complete all as specified and as directed.

S&F for PVC Legs and Skiring (4 inch) complete all as specified and as directed

S&F Sauccer racks stainless steel, complete all as specifed and directed by Engr-in-Charge

S&F Thali racks stainless steel, complete all as specifed and directed by Engr-in-Charge

S&F for Gola profile, Aluminium Handles for doors of Kitchen Cabinets, complete all as specified and as directed.

S&F Detergent Rack, stainless steel, complete all as specifed and directed by Engr-in-Charge

S&F for Gas pump Hydrolic gas spring (35kg load capacity) complete all as specified and as directed.

S&F for inner drawer / partition for drawer complete all as specified and as directed.

S&F for EZ Up and Down 600mm, Stainless Steel including left up of suitable capacity, butterfly hinges, ss screws and all other fitting and fixtures complete all as specified and as directed.

S&F for Magic Corner, Stainless Steel including fitting and fixtures complete all as specified and as directed.

S&F for butterfly hinges, Stainless Steel complete all as specified and as directed.

S&F for Channel 500mm EDS Standard , Stainless Steel complete all as specified and as directed.

S&F for High Rails , 250mm telescopic ball bearing drawer chaneels, Stainless steel 500mm long complete all as specified and as directed.

SURAJ ENTERPRISE

roxy enterprise

Vijay Construction Co

badri glass and construction

V D JADEJA

K K Construction Co

fakhrie apostrical