DISMANTLING EXISTING OLD STEEL TUBULAR POLE AND PROVIDING LED STREET LIGHT WITH FRP POLE IN DIFFRERENT CITY AREA IN OF WORD NO 4&5 AT DWARKA, DIST- DEV BHOOMI DWARKA. (UNDER SJMMSVY GRANT) WITH INCLUDING 5 YERARS OF O&M

NAME OF WORK : DISMANTLING EXISTING OLD STEEL TUBULAR POLE AND PROVIDING LED STREET LIGHT WITH FRP POLE IN

DIFFRERENT CITY AREA IN OF WORD NO 4&5 AT DWARKA, DIST- DEV BHOOMI DWARKA. (UNDER SJMMSVY GRANT) WITH

INCLUDING 5 YERARS OF O&M

BILL OF QUANTITIES

Item. No. Description of Item Quantities Unit Amount

1 Removing Exesting Electric Pole with Dismantling of RCC/ Masonry Foundation 150.00 1966.47 Ea.

including Removing First Street Light , cable and any other assessor ALSO

SHIFTING all materials in suggest by the nagar palika. all shifting and placing

charge are include with rate. dismantling foundation of pole and Extra Derbies

are shifting by contractor in suggest by department no extra pay for any

2 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 4.00 56.56 Mtr.

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.(e)

One wire 6.00 sq. mm.

3 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV 1050.00 101.00 Mtr.

grade to be erected as directed of following size.(A) 2 core 2.5 Sq. mm

Item. No. Description of Item Quantities Unit Amount

4 Supplying and erecting LED street light / Flood light fittings with High power 150.00 3345.12 Ea.

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. (i) 48 watts- Cat-lll (Note:- If require, ERDA testing will carry

out,testing charges will be deducted from bill. And deducted security deposite

(2.5% of Estimate cost) will be released after completion of replacement period

5 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 0.25 1961.42 Mtr.

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.(A) Suitable

for 100 Amp. Capacity.

6 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system 150.00 270.68 Ea.

and having breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

7 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 4.00 668.62 Ea.

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity.(b)40 Amp.Cat.III

8 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 794.87 Kgs.

Item. No. Description of Item Quantities Unit Amount

9 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 3.00 4591.46 Ea.

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

10 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / 600.00 126.25 Mtr.

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables.(B) 4 core 6 Sq. mm.

11 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required 600.00 357.54 Mtr.

depth for laying any size of cable or locating the fault all over the run and back

filling the same and making the surface as normal ground..(B) If additional

machineries like hammer driller or JCB use [Add] ( SOR-2021-22 I. no. 4-5-2-

12 Providing & laying approved make Double walled corrugated pipes (DWC) of 600.00 62.62 Mtr.

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable.(A)50 mm outer dia.

Item. No. Description of Item Quantities Unit Amount

13 Disconnecting the cable connection and Providing straight joint with PVC mould 150.00 1083.73 Mtr.

using heat shrink /cast resin type epoxy compound Insulating material and

making the joint complete using necessary in line connectors, hardener, earth

continuity connection, spacers etc. and reconnecting the same & ensure the joint

resistance within the limits as per IS. (A) up to 25 Sq mm Cable

14 Supply of approved make FRP Pole having following specifications: FRP Light 150.00 17611.37 Ea.

Pole made by CNC filament winding machine using thermoset resin

polyester/epoxy resin system) having minimum 62% glass content. The pole

should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or

MS Material duly painted with Epoxy paint.Pole should be flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. A highly weather

resistant polyurethane coating shall be applied to the pole after applying suitable

primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more

than 10% of the length of pole for the given load“ Pole should be generally made

as per the dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or ASTM D

4923/01 including cable termination box with necessary accessories . The size

of pole and type of installation with foundation as per manufacturer details and

site requirement are as below . (4) 'B' class (Heavy Duty) pole suitable for direct

grouting for single or a double arm.[E] Overall Length of 7.0 meter, Average

thickness : 8mm, Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of Pole

Kg approx. (Burial Depth 1000 mm)

15 Providing FRP arm bracket of having 2 sets of suitable SS304 hardware for 150.00 2551.26 Ea.

fixing the brackets & spread of 1.2 Mtr(Suitable for 89 to 114 mm pole top dia(A)

Single arm bracket

Item. No. Description of Item Quantities Unit Amount

16 Supplying & erecting IP 55 grade following size section pillar fabricated from 3.00 3423.90 Ea.

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and 45 cms high bricks

work finishing with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with

nut and bolt for erecting bakelite sheet. Painting the Section Pillar inside and out

side with three tank powder coated paint. section pillar roof should be without

joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of

1962 (B) 75 X 60 X 45 cm section pillar fabricated from 16 Guage MS Sheet with

angle iron legs 45 cms long made from 35 X 35 X 5 mm thick MS angle.

17 Supplying and erecting HYLAM sheet on existing angle iron frame.for following 2.25 2311.89 Sq.Mtr.

thickness.(f)12mm.

18 Supplying & erecting approved make Digital time switch having lithium cell 6 3.00 3168.37 Ea.

years operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed.

19 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. 150.00 368.65 Ea.

galvanised iron pipe with coupling and buch buried in specially prepared earth

pit complete with necessary 8 SWG earth wire.

20 For using salt and charcoal / coke as required for pipe type earthing. 150.00 171.70 Ea.

21 Supplying & erecting power contactor ,AC3 duty for time switch complete 3.00 2782.55 Ea.

erected as per direction Cat III [D] 4 pole 440V 40 Amp.

I / Weam / are willing to carryout the work at…………..…………. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

Item. No. Description of Item Quantities Unit Amount

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

In words………………….. In words………………………..

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Note 5:- GST WILL BE PAID EXTRA AS PER TENDER CONDITION