Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.9 L
Closing Date
31 Aug 2026, 12:00 pm7d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR.DEN3
15 conditions · 4 needing a document upload
Financial Eligibility Criteria (Clause 10.2 of part-I GCC-2022): The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Important Instruction: "The balance sheet and all other financial documents attested/certified by the Chartered Accountants (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference" Vide letter no. CE/Works/ECR/HJP's letter No.ECR-HQ0ENGG (CONT)/ 0009/2025 dtd. 18.11.2025 (ii) Gazette Notification No.1-CA (7)/192/2019, dated 02.08.2019 of the Institute of Chartered Accountants of India, published in the Gazette of India).
Technical Eligibility Criteria (Clause 10.1 of GCC-2022): (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Note: for subletting of work costing up to Rs.50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: (Clause 10.1 of part-I GCC-2022): Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of Work: - "Any Civil Engineering Work involving construction of building/quarters/any other work involving RCC work".
13 conditions · 4 needing a document upload
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. as the case may be. Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected.
A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
(ii)Following documents shall be submitted by the tenderer:
(a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet) above (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet) above (c)The following documents shall be submitted by the partnership firm, with the tender: i. A notarized copy of the Partnership Deed or a copy of the Partnership deed registered withthe Registrar. ii. A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. iii. An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. iv. All other documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of GCC 2022 of the Tender Form (Second Sheet) (e) Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. (f) LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). (g) Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet) above.
(iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
A copy of Documents against eligibility criteria must be submitted along with the E-tender. No any documents against the same will be entertained in the office of Divisional Railway Manager, Dhanbad or anywhere else at any time. Tender will be decided purely on the basis of documents available/attached with the E-tender irrespective of whether tenderer is working contractor or new. However Railway may ask clarification with respect to document available/attached with the E-tender, if required.
In case, submission of Bid Security in the form of Bank Guarantee, the original Bank Guarantee should be delivered to COS/Bill & Tender/Dhanbad (Official Nominated) before closing date for submission of bids. (i.e. excluding the last date of submission of bids) as per Para 3 (ii) of Sl. No.13 (Bid Security) of the tender document.
Construction, Improvement and major Upgradation of Store Cum Maintainer's duty Rooms with Toilet Facilities under the sections of ASTE/DHN and Interlockng of 1 No. of LC Gate having TVU more than 20000 in Dhanbad division.
167-DHN-2026-27~ECR
167-DHN-2026-27
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹2.9 L
8 Aug 2026
8 Aug 2026
17 Aug 2026
74 items across 2 schedules · ₹1,87,59,113.08 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 52 | 234.05 | 12,170.6 |
| 2 | Every additional lead of 50m or part thereof beyond1st 50 m upto 9 such additional lead | cum- lead | 52 | 50.96 | 2,649.92 |
| 3 | All kinds of soil | cum | 50 | 205.45 | 10,272.5 |
| 4 | All kinds of soil. | cum | 1092 | 286.85 | 3,13,240.2 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 26 | 253.95 | 6,602.7 |
| 6 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 48.8 | 368.65 | 17,990.12 |
| 7 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 254.5 | 2,161.2 | 5,50,025.4 |
| 8 | All kinds of soil | Sqm | 200 | 28.15 | 5,630 |
| 9 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 58.72 | 7,365.15 | 4,32,481.61 |
| 10 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 89.3 | 6,833.4 | 6,10,222.62 |
| 11 | Foundations, footings, bases for columns | Sqm | 33.27 | 307.95 | 10,245.5 |
| 12 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 86.47 | 8,364.2 | 7,23,252.37 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 90.32 | 10,185.05 | 9,19,913.72 |
| 14 | cum | 103 | 10,719.3 | 11,04,087.9 | |
| 15 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 315.2 | 307.95 | 97,065.84 |
| 16 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 727.3 | 766.55 | 5,57,511.82 |
| 17 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 304.95 | 608.35 | 1,85,516.33 |
| 18 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 41.16 | 804.25 | 33,102.93 |
| 19 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 11.34 | 814.95 | 9,241.53 |
| 20 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 368 | 6,882 | 25,32,576 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 18.59 | 6,658.25 | 1,23,776.87 |
| 22 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 336 | 8,512.1 | 28,60,065.6 |
| 23 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 25.8 | 8,288.35 | 2,13,839.43 |
| 24 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 28.8 | 1,018.05 | 29,319.84 |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 192 | 1,063.45 | 2,04,182.4 |
| 26 | Fixed to steel windows by welding | Kg | 134.6 | 181 | 24,362.6 |
| 27 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 800 | 197.7 | 1,58,160 |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 4072 | 111.95 | 4,55,860.4 |
| 29 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 64 | 4,781.15 | 3,05,993.6 |
| 30 | Using flats 30x6mm for diagonal braces and central cross piece | Sqm | 7.56 | 4,615.15 | 34,890.53 |
| 31 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 488 | 142.3 | 69,442.4 |
| 32 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. | Sqm | 24.33 | 733.3 | 17,841.19 |
| 33 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 74.47 | 545 | 40,586.15 |
| 34 | Acid and alkali resistant tile | Sqm | 31.5 | 1,515.45 | 47,736.68 |
| 35 | Size of Tile 600x600 mm | Sqm | 490.7 | 1,416.65 | 6,95,150.16 |
| 36 | 110 mm diameter | Metre | 160 | 319.75 | 51,160 |
| 37 | 110 mm | Each | 32 | 110.6 | 3,539.2 |
| 38 | 110x110x110 mm | Each | 32 | 205.45 | 6,574.4 |
| 39 | 110 mm bend | Each | 32 | 132 | 4,224 |
| 40 | 110 mm Shoe | Each | 8 | 115.95 | 927.6 |
| 41 | 110 mm | Each | 24 | 309.5 | 7,428 |
| 42 | 1:6 (1 cement: 6 fine sand) | Sqm | 3479.45 | 282 | 9,81,204.9 |
| 43 | 1:4 (1 cement: 4 fine sand) | Sqm | 240.25 | 361.3 | 86,802.33 |
| 44 | 1:3 (1 cement : 3 fine sand) | Sqm | 570.5 | 253.05 | 1,44,365.03 |
| 45 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 220.7 | 214.3 | 47,296.01 |
| 46 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 220.7 | 162.55 | 35,874.79 |
| 47 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 153.86 | 158.95 | 24,456.05 |
| 48 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | Sqm | 928 | 154.45 | 1,43,329.6 |
| 49 | Two or more coats on new work | Sqm | 279.94 | 131.45 | 36,798.11 |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 3168 | 123.85 | 3,92,356.8 |
| 51 | Two coats | Sqm | 1728 | 116.05 | 2,00,534.4 |
| 52 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 72 | 2,007.1 | 1,44,511.2 |
| 53 | In cement mortar | cum | 32 | 1,698.45 | 54,350.4 |
| 54 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 8 | 5,781.35 | 46,250.8 |
| 55 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 8 | 3,459.05 | 27,672.4 |
| 56 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 8 | 1,411.15 | 11,289.2 |
| 57 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 120 | 1,018.05 | 1,22,166 |
| 58 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 8 | 600.35 | 4,802.8 |
| 59 | PN - 16 Pipe, 25 mm OD (SDR-7.4) | Metre | 80 | 268.2 | 21,456 |
| 60 | PN - 16 Pipe, 32 mm OD (SDR-7.4) | Metre | 160 | 320.6 | 51,296 |
| 61 | PN - 10 Pipe, 63 mm OD (SDR-11) | Metre | 240 | 654.65 | 1,57,116 |
| 62 | PN - 10 Pipe, 75 mm OD (SDR-11) | Metre | 400 | 879.45 | 3,51,780 |
| 63 | 25 mm nominal bore | Each | 16 | 399.15 | 6,386.4 |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 8000 | 9.7 | 77,600 |
| 65 | 15 mm nominal bore | Each | 16 | 434.2 | 6,947.2 |
| 66 | 15 mm nominal bore | Each | 24 | 594.75 | 14,274 |
| 67 | 15mm nominal bore | Each | 16 | 500.35 | 8,005.6 |
| 68 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 8 | 96.75 | 774 |
| Schedule total | ₹1,66,88,556.68 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2018GCC-April-
ATTACHMENT
DiggingJPOdt.15.05.2024.pdf
ATTACHMENT
Instructiontotenderers-USSORDSR-2021MSOP-2018GCC-April-22uptoCorrec.Slip-11withUDINBGBidcapacity.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].