Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹49.7 LAccepted-AOC YADIPORA PHALHALLAN TEH PATTAN DISTT BARAMULLA J K | PATTAN | BARAMULLA | JAMMU AND KASHMIR | 193121 | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹51.2 L+₹1.3 L (2.54%)Rejected-AOC | L-2 | Rejected-AOC Other than Lowest | |
| 3 | L-3₹54.1 L+₹4.1 L (8.30%)Rejected-AOC | L-3 | Rejected-AOC Other than Lowest |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
23 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF TOILET AND INFRA AT MES DET GULMARG, PROVN OF 6X WC AND 4X BATHROOMS NEAR RP GATE NO 2 OF INF BN,PROVN OF COOK HOUSE INF BN AND SPL REPAIR TO SEMI UNDERGROUND WATER STORAGE TANK IN HAWS UNDER GE 969 EWS.
2022_MES_522574_3
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
GULMARG
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹93,000
Yes
6 Oct 2022
26 Jul 2022
25 Aug 2022
26 Jul 2022
23 Aug 2022
8 Aug 2022
Amount
Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete.
Excavation in trenches in soft/loose soil n. exc 1.5M wide & n. exc 1.5 M deep for laying of GI/CI pipe line & getting out including forming bottom surfaces all as specified and as directed.
M&L TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (aneeled) not less than 0.9mm dia or securing with clips all as specified and as directed.
All as per above item no 3 but 5mm dia and above including 10mm dia in stirrups.
M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded crushed stone aggregate), in foundation, filling and mass concrete all as specified and as directed.
Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm all as specified.
Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point all as directed.
M&L for walling of random rubble masonry built in CM 1:6 brought up to courses all as specified and as directed.
Extra over hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge n.exc 40mm all as specified and as directed.
M&L for raised pointing to random or polygonal rubble uncoursed brought up to course in CM 1:4. Complete all as specified and as directed.
M & L Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings, plinth Course, bond stones including use of form work all as specified and directed.
M & L Brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.
M & L Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified.
M & L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound including finishing the surface even and smooth without using extra cement complete all as specified. (supply only of W P C shall be measured and paid separately).
M & L Rendering 15 mm thick in cement and sand mortar 1:4 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L Rendering 10 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound.
Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified.
All as per item no. 19 above, but on ceiling
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.
M & L for hard core of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L 100mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring. Complete all as specified and as directed.
M & L 75mm thick PCC (1:3:6) type C-2 (using 20mm graded crushed stone aggregate),as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
S & F Roof trusses, (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. All as specified and as directed.
Supply & Fixing mild steel flat iron as in wind ties over roof covering using steel of grade Fe-290 Gde E-165 including necessary drilling holes etc and similar works complete all as specified.
M&L steel iron base plate plugs, bolt and screw of Fe-410W (Gde-E-250 quality-A) complete all as specified and directed.
M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing complete all as specified.
M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for fair finished surfaces in any position flat or curved complete all as specified.
M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floor and beams, etc in rough finished surface of concrete.
M & L for form work to sides of pillars (square/rectangular or polygonal), posts, struts, piers, columns and stanchions etc in rough finished surface of concrete.
M & L for RCC M-25 Design Mix (20 mm graded crushed stone aggregate) in foundations, incl rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified.
M & L for RCC M-25 Design Mix (20 mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors , roofs , landing , balconies , canopies, deck slab and in shelves and the like complete all as specified.
M & L for RCC (Design Mix M-25, 20 mm graded crushed stone aggregate) as in beams, cantilever, bressummers, lintel over 1.5 m span.
Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F for 2nd Class Hardwood in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as directed.
S & F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.
S & F 30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.
S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified and as directed.
M & L Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.
M & L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified.
S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates, hook and pintle hinges: large hasps and stapples , chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two ways and three ways straps, plate washers and similars small articles conforming to Fe-290 Gde E-165.
M & L Second class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified.
S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.
All as per item no. 46 above but 75 mm long complete all as specified.
S&F 75 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed type B-12 complete all as specified.
S&F 125 mm long extruded brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified.
S & F 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.
S&F 300 mm long brass sliding bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.
S & F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.
All as per item No. 53 above but 150 mm length of bolt.
S&F 200 mm long extruded brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
S&F 150mm long extruded brass handles fabricated type polished complete all specified and as directed.
S&F 125mm long extruded brass handles fabricated type polished complete all specified and as directed.
S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified.
S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified.
M & L 25 mm thick PCC 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate), including finishing surface of concrete topping even and rough complete all as specified.
M & L machine cut kota stone slab flooring 18 - 20mm incl marble water border line 75 mm wide thick over 15mm cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to the match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L Non skid coloured ceramic tiles 300x300x 6-7mm thick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified.
M & L Glazed ceramic tile 450 x 300 x 06-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified.
S & F for 4 mm thick figured glass pin head ftype and glazing with oil putty in squares n.exc 0.5 sqm in each pane.
All as per item No. 64 above but pin head type, figured glass complete all as specified.
S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore of pipe.
All as per item No. 66 above but 110mm bore of pipe.
S & F for PVC (SWR) branch piece equal or unequal, plain including jointing with solvent cement 75 mm bore complete all as specified.
All as per item No. 68 above but 110mm bore.
S & F for PVC (SWR) vent cowl, plain including jointing with solvent cement 75mm bore complete all as specified.
S & F for PVC (SWR) floor bend, plain including jointing with solvent cement 75 mm bore complete all as specified.
All as per item No. 71 above but 110mm bore.
S & F for PVC (SWR) reducer pipe piece, plain including jointing with solvent cement 110 mm bore complete all as specified.
S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal
S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal
S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified.
S & F for 125/110 mm PVC (SWR) gully trap, plain with grating including jointing with solvent cement complete all as specified.
S & F Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified.
S & F PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed, complete all as specified.
S & F Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed complete all as specified.
S & F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified.
S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed complete all as specified.
S & F Stainless steel gratings 75mm bore size fixed with cement motar.
M & L Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc.
Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and directed.
M & L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1 :4 (1 cement 4 Coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with grooves all arround as per approved pattern incl scrubbing and washing, top layer with brushes and water to expose the stone chiping complete all as specified and directed.
S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified.
M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber framed and fixed, complete all as specified
All as per item no. 89 above but except timber.
Second class soft wood 20 mm thick in facia boarding fixed with nails in any situation planed one side with butt joints complete all as specified.
M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc.
S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm complete all as specified and directed.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete with coupling, waste pipe and brackets etc complete all as specified.
M&L 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding, polishing and moulding /Rounding to edges of of stone slabs on eges, complete laid top and sides of cooking plat form over 15mm thick sceed bed in CM 1:4, complete all as specified.
S&F 20 mm bore stop valve fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.
S&F 15 mm bore angle cock, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.
S&F 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 25mm-210 gms, complete all as specified.
S&F 15 mm dia CP bib tap with crutch butterfly handle screw fixed.
S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.
S&F 25mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.
S&F 500 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as specified and as directed.
M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid on sand chusioning with Grey cement and no pigment , complete all as specified and directed.
M & L Sand filling under floors or in foundations including watering and consolidation complete all as directed
M & L Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as directed.
LLDPE Septic tank exc inordinary soil , foundation in PCC 1:2:4 brick work in CM 1:4 RCC slabs covers including RCC precast Manhole cover having 6mm Plate embedded all arround/fiber reinforced cover with angle iron frame vent shaft and sludge chamber etc complete for 20 users complete all as specified as per manufactures instructions .
Soakage well Exc in Ordinary Soil foundation in PCC 1:3:6 well of honey combed and soild in M-25 concrete including intercepting chamber screen chamber brick work in 1:4 CM , RCC cover Slab in M-25/RR masonary /filling with bricks Bats , complete of size 2.40 Mtr dia x 3.00 mtr deep complete all as specified and shown in drg No CESZ/TD-1080/2011.
Cutting into existing manholes for connecting new drains pipe making good to pipes rendering cutting out existing benching for & forming branch channel (1/2 round of 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required internal dia of pipe 150 mm dia.
M & L for 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and as directed.
Demolition of cement concrete(un reinforced) in ground floors and paving not exceeding 15 cm thickness (above or ground level) complete all as specified.Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern in roof covering all as specified and as directed.
Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern in roof covering all as specified and as directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frames)
Dismantling timber scantling 40 sq cm over in section in any positoin unframed work
Demolition of brick work or stone boulder masonry, built in cement mortar.
M &L Pre-cast cement concrete block masonry with solid blocks,Type C1, 1:3 :6 ( using 20 mm graded crushed stone aggregate) masonary exc 10cm in width and setting in CM 1 : 4 complete all as specified and directed.
M&L for Chequered cement concrete tiles with grey cement and pigment of size 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry in floors on screed bed or bedding layer of 20mm thick in CM 1:4.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 15 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor (a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on independent board
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS Copper conducior cable including clamps. screws gutiier/plug eIc PVC unsheathed cable into and inciuding wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S & F fixing Switch piano, flush type single pole, one way 5/6 Amp
S & F switch piano Flush type, single pole, one way 6 amp 240 volts complete all as specified.
S&F Switch socket combination 2 in1. 3 pin.5 and 15 Amps flush type,universal complete all as specified and as directed
S&F Switch socket combination 2 in1 3 pin.5 Amps flush type, universal complete all as specified and as directed.
S& F ultra modern, energy saving. surface mounted, decorative oval bulk head edge lit LED luminaire comprising of high brightness LEDs 10W LED Complete ali as specified and as directed
Supply and fixing endura linear leo surface and mounted LED tube light fitting 18W four feet, extruded aluminium housintg provided for efficient heat dissipation with polycarbonate diffuser & integerated electronic driver complete all as specified and as directed by Engr in Charge.
Supply and fix ceiling rose 3 terminal / PVC/Polycarbonate, isolated body.
S&F LED Lamp 15W.
S&F LED Lamp 10W.
Sheet metal enclosure for 8 way DBs when MCB to be used single phase 240 volts single door complete all as specified and as directed.
MCB single pole of capacities 6 to 32 amp, 240 volts complete all as specified and as directed.
MCB DP of capacities 40 amp, 240 volts Complete all as specified and as directed.
Supply and fixing heavey duty Exhaust fan 300 mm sweep 230 volts. plastic type Ac connecting up inciuding provision of cable from ceiling rose/ connector to fan complete all as specified and as directed.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (eath pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers o galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:36 type C1 chamber with RCC 1:24 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode. 20 mm dia Gi pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on compiotion Note The rate is iincluSIvE of necessary earth work, RFR and removal etc
Taking up or down old unserviceable Gl/MS tubing and connections including all fittings from the trenches, wall, floor etc of sizes 80mm complete all specified and directed.
Material and laying GI tubing medium grade ISI marked complete with all necessary fittings of sizes 80 mm bore in trenches.
Supply and fixing MS flange Suitable for 80 mm bore Gl pipe line including welding with pipe , nuts, bolts gasket 3 mm thick complete all as specified and directed.
S&F Cast iron Sluice Valve ISl mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel/ brass spindle with cast iron wheel at top complete with nuts, bolts. washers and gaskets of size 80 mm bore.
M&L for construction of old broken brick masonary Valve Chamber with PCC (1:3:6) type C1 foundation and full brick wall of size 1.0 x1.0 x1.0 mtr ( internal dimension), with CGI sheet shelter as snow protection roof slope not less than 45 degree, welded on angle iron frame of size 40x40x6mm embeded on top of valve chamber, incl locking arrangements and painted with two coats of synthetic enamel paint over a coat of red-oxide primer, incl necessary earth work etc. All as specified and directed.
S&F LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F LED light fitting 1x20W, 220 AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F lamp Holder, PVC/Polycarbonate type with black plate suitable for batten fitting complete all as specified and as directed.
S&F distribution Board, SPN 8 Way, single Door complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning of SP 5 to 32 Amp capacity. complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning of SPN 32 Amp capacity. complete all as specified and as directed.
S&F Distribution Board, SPN 4 Way, single Door complete all as specified and as directed.
Supply and Fixing 240V, 10 KA 'B' curve miniature circuit breaker of (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade Cross-Sectional area galvanized steel strip or Wire armoured, of size 2 core 16 Sq mm.
Supply and laying XLPE insulated,screened PVC bedded galvanized steel strip or Wire armoured, electric power cables(heavy duty) 1100 Volts with stranded alminium conductor of size 2 core 10 Sq mm.
Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directeed. (Note The punned down thickness shall only be measured)
Sub Class 'B' common kiln burnt clay building bricks, old size 230mmx115mmx75mm laid at right angle along the cable over sand cushioning as cable protection complete all as specified.
Supply & Fixing 25 mm dia Gl tubing medium grade, ISI marked complete with all fittings laid in trenches or laid under floors fixed on walls with and providing clamps etc complete all as specified & directed
Supply & Fixing 20 mm dia Gl tubing medium grade, ISI marked complete with all fittings laid in trenches or laid under floors fixed on walls with and providing clamps etc complete all as specified & directed.
Cutting of existing Gl pipe line of size 25 mm dia and inserting new pipe line including all fittings complete all as directed.
S & F of Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe or unions and fixed complete including taking down of old one Suitable of 25 mm dia sizes all as specified and directed.
S & F of Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe or unions and fixed complete including taking down of old one Suitable of 20 mm dia sizes all as specified and directed.
Returning, filling in trenches including spreading levelling watering and well ramming in layer n. exc. 250mm in any type of soil after the pipe laid & tested complete all as specified and as directed.
Note:- Schedule of credit Rs 26,100.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .