Construction of boys and girls toilets and kitchen in Primary School Sufi Tola-02, identified for rejuvenation.

Earth work in cutting or in embankment in ordinary soil, excavation to be in the regular pits not exceefing 0.5m in depth and earthwork in embankment to be in 20cm layers, including ramming and dressing the surface to required levels & slope & also including 1.50m lift & 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the Engineer-in-Charge. (Excluding Royalty) S.I. No. 253

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 273)

First class B/w in 1:4 Cement C'sand mortor in F/P including supply of all meterial labour T&P etc required for proper completion of work SI N0.305

First class B/w in 1:4 Cement C'sand mortor in S/S including supply of all meterial labour T&P etc required for proper completion of work SI N0. 305+310

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I.

RCC 1:2:4 with cement c'sand stone grit of 20 mm gauge in slab of culvert excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 284

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

P/F of 1st quality ceramic glazed wall tiles conforming to IS: 15622 of approved make in all colours, shades except burgundy, bottel green, black of any size as approved by E/I in skriting, rises of step and dedo over 12mm thick bed of cement mortor 1:3 and jointing with grey cement sullery @ 3.3 kg per sqm including point in white cement mixed with pigment of matching shade complete D.S.R. No. 8.31

Providing and laying of 600x600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. As per D.A.R. 11.41.2

Fabrication of Mild steel or iron work of grill and stair case railling (When not included in an overall rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts and wastage etc. and there fixing if required for proper completion of work.(S.I.No.502c)

Two coat water proofing cement paints with primer,using approved colouring materials of buff, blue, grey or ,labour and T&P etc . Required for proper completion of work.(S.I.No.660)

Two coat painting with synthetic enamel paints on new plain surface with primer of approved quality of colour by E/I.

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: as D.S.R. 17.1.1

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. As per D.S.R. No. 17.4.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap as per D.S.R. 17.7.2

P/placing on terrace polythylene water storage tank ISI:12701 marked with cover and suitable locking arranngement and making necessary holes for inlet, outlet and over flow pipes but without fitting and the base support of tank. As per D.S.R. 18.48

P/F of 15mm nominal bore CP brass bib cock all complete

P/L of 110 mm dia P.V.C. rain water pipe conforming to IS: 13592 all complete as per D.S.R. 12.41.2

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. As per D.S.R. No. 18.52.1

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 As per D.S.R. No. 18.53.1

Earth work in cutting or in embankment in ordinary soil, excavation to be in the regular pits not exceefing 0.5m in depth and earthwork in embankment to be in 20cm layers, including ramming and dressing the surface to required levels & slope & also including 1.50m lift & 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the Engineer-in-Charge. (Excluding Royalty) S.I. No. 253

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) and curing complete, including cost of form work in foundation and floors-completion of the work as per direction of E/ I. (S.I No. 273)

First class B/w in 1:4 Cement C'sand mortor in F/P including supply of all meterial labour T&P etc required for proper completion of work SI N0.305

First class B/w in 1:4 Cement C'sand mortor in S/S including supply of all meterial labour T&P etc required for proper completion of work SI N0. 305+310

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I.

RCC 1:2:4 with cement c'sand stone grit of 20 mm gauge in slab of culvert excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc. required for proper completion of the work. SI No. 284

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

P/F of 1st quality ceramic glazed wall tiles conforming to IS: 15622 of approved make in all colours, shades except burgundy, bottel green, black of any size as approved by E/I in skriting, rises of step and dedo over 12mm thick bed of cement mortor 1:3 and jointing with grey cement sullery @ 3.3 kg per sqm including point in white cement mixed with pigment of matching shade complete D.S.R. No. 8.31

Providing and laying of 600x600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. As per D.A.R. 11.41.2

Fabrication of Mild steel or iron work of grill and stair case railling (When not included in an overall rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts and wastage etc. and there fixing if required for proper completion of work.(S.I.No.502c)

Two coat water proofing cement paints with primer,using approved colouring materials of buff, blue, grey or ,labour and T&P etc . Required for proper completion of work.(S.I.No.660)

Two coat painting with synthetic enamel paints on new plain surface with primer of approved quality of colour by E/I.

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: as D.S.R. 17.1.1

P/F of Urinal Pot for Girls as per direction of E/I all complete

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap as per D.S.R. 17.7.2

P/placing on terrace polythylene water storage tank ISI:12701 marked with cover and suitable locking arranngement and making necessary holes for inlet, outlet and over flow pipes but without fitting and the base support of tank. As per D.S.R. 18.48

P/F of 15mm nominal bore CP brass bib cock all complete

P/L of 110 mm dia P.V.C. rain water pipe conforming to IS: 13592 all complete as per D.S.R. 12.41.2

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. As per D.S.R. No. 18.52.1

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 As per D.S.R. No. 18.53.1

Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the bullding and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.

Concrete with 4 cm (1.5'') gauge brick ballast fine local sand of 1.25 Fineness modulous and cement in Proportion of 12:6:1 in foundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work.

R.C.C. work with cement approved coarse sand and 2 cm. (3/4'') gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour & T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

R.C.C. work with cement approved coarse sand and 2 cm. (3/4'') gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour & T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

R.C.C. work with cement approved coarse sand and 2 cm. (3/4'') gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour & T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

R.C.C. work with cement approved coarse sand and 2 cm. (3/4'') gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour & T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks.

Mild steel or iron work of small Sizes and sections such as holding down bolts, hold fasts, tie. Rods, gratings etc. (when not including in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work.

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

Earth work in cutting or in Filling in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20'') in depth and earth work in 8 m bankment to be in 20 cm(8'') layors, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5fts) lifts and 30 m. (100') lead. The earth from cutting to be used in making filling or to be deposited as spoii banks within 30 metres (100 fts) distance as directed by Engineer-in-Charge. (Rate is including Royality)

Providing and injecting chemical for pre-constructional anti-termite treatment and creating and chemical barrier under and around the coloumn pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured as per I.S 6313 (part 2013) IMIDACLOPRID SC 30.5 concentrate or any other approved material such as Hepthachlor of chlordane will be used.

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

12 mm thick plaster in 1:4 cement & c'sand mortor over brick work minimum thickness not less then 10 mm including all supply of meterial , Labour T&P etc required for proper completetion of the work.

12 mm cement plaster finished with a floating coat of neat cement of mix

providing and laying vitrified floor tiles in 600x600 cm (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc, complete.

P/Laying 2mm thick plaster of paris putty for proper complition of the work as per Direction of E/I all complete As per D.S.R. No. 13.26

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @1.67 ltr/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm) as per D.S.R. No. 13.46.1

Two coat painting with synthetic enamel paints on new plain surface with primer of approved quality of colour by E/I.

Providing and fixing SS kitchin sink size 610x510mm

Providing and fixing P.V.C. watste pipe for sink or wash basin including P.V.C. waste fittings complete

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (15 mm)

Supply and fixing of 10 cm internal dia with PVC pipe (kisan, supereme or equivalent) 6 kig / sqm pressure 10 cm dia.upvc

CPVC Pipe for Water Supply

Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should bo ISI marked (for 200 Liters)

Wiring point for light with 1.5 sq. mm PVC insulated single core aluminium conductor cable in heavy gauage rigid steel conduit pipe on surface complete with PVC conduit with 1.5 sq.mm FRISH PVC insulaed multistrand copper conductor calbe as earthwire drawn inside the conduit.

Wiring point for fan/fresh air fan (light duty exhaust fan) in PVC conduit with 1.5sq. Mm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring point for plug point in PVC conduit with 1.5sq. Mm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.