RE-WIRING, REPAIR/MAINT OF E/M FITTING AND FIXTURE AT AGE B/R-II OF GE (A) NO.1 JODHPUR

Amount

Taking down copper/aluminium point wiring surface/ concealed (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc. removing materials from site of work complete or removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( ISI Marked) passing in PVC cassing - N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling with existing/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.

All as per Sl. item No. 2.00 here-in-above, but suitable for one socket outlet 3 pin 5/6 Amps on same board

All as per Sl. item No. 2.00 here-in-above, but suitable for one socket outlet 3 pin 5/6 Amp on independent board

All as per Sl. item No. 2.00 here-in-above, but suitable for one light point controlled by two, two way switch

All as per Sl. item No. 2.00 here-in-above, but with using 2.5 Sq mm single core multistanded copper conductor cable including 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M&L for point wiring complete with using 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked passing in existing PVC conduit fixed on surface of wall / roof / ceiling or concealed in wall etc in sunken pressed steel terminal boxes in wall,including 3.00 mm thick plastic laminated hylem sheet and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.

All as per Sl. item No. 7.00 here-in-above, but suitable for one socket outlet 3 pin 5/6 Amps on same board

All as per Sl. item No. 7.00 here-in-above, but suitable for one socket outlet 3 pin 5/6 Amp on independent board

All as per Sl. item No. 7.00 here-in-above, but suitable for one light point controlled by two, two way switch

All as per Sl. item No. 7.00 here-in-above, but with using 2.5 Sq mm single core multistanded copper conductor cable and 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M&L for concealed Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked , class V in concealed PVC conduit (ISI Marked) not less than 20 mm dia heavy duty with accessories etc and including sunken pressed steel terminal boxes in wall, including 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed. Note- Quoted Rates is deemed to be inclusive of chasing/cutting & making good of disturbed surface match as per existing.

All as per Sl. item No. 12.00 here-in-above, but suitable for one three pin 5/6 Amp socket on same board with other switches.

All as per Sl. item No. 12.00 here-in-above, but suitable for one three pin 5/6 Amp socket on independent board.

All as per Sl. item No. 12.00 here-in-above, but suitable for one light point controlled by two, two way switch

All as per Sl. item No. 12.00 here-in-above, but with 2.5 Sq.mm. (nominal area) cable for one 3 Pin 16 amp socket on independent board including one 1.5 sqmm copper conductor multi stranded green colour PVC insulated unsheathed cable 1100 volts grade as earth wire upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed. Note- Quoted Rates is deemed to be inclusive of chasing/cutting & making good of disturbed surface match as per existing.

All as per Sl. item No. 17.00 here-in-above, but suitable for one 3 pin 5 or 6 Amps socket outlet on same board.

All as per Sl. item No. 17.00 here-in-above, but suitable for one 3 pin 5 or 6 Amps socket outlet on independent board.

All as per Sl. item No. 17.00 here-in-above, but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

All as per Sl. item No. 17.00 here-in-above, but with 4.0 Sq mm single core multistanded copper conductor cable for AC Point Connected with sheet metal enclosure.

S&F in replacement of modular switch 1 way 6 Amp, 1 module complete all as specified and directed.

S&F in replacement of modular switch 1 way 16 Amp, 1 module complete all as specified and directed.

S&F in replacement of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement of modular socket 6 Amp/16 Amp, 6 pin combined 2 module complete all as specified and directed.

S&F in replacement of modular bell push 6 Amp, 1 module complete all as specified and directed

S&F in replacement of Modular blank plate 01 module size complete all as directed.

S&F in replacement of modular switch 2 way 6 Amp, 1 module, complete all as specified and directed.

S&F switch piano flush type single pole one way 6 Amp ISI Marked, complete all as specified and directed.

S&F switch piano flush type single pole one way 16 Amp ISI Marked, complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 6 Amp flush type ISI Marked, complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked, complete all as specified and directed.

Supply & fix switch piano flush type single pole two way 6 Amp ISI Marked, complete all as specified and directed.

Supply & fix bell push, piano flush type, 6 Amp ISI Marked, complete all as specified and directed.

Supply and fix bell Ding Dong, AC 230 volts, single pole, complete all as specified and directed.

M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and directed.

M & L for Lamp holder, PVC/Polycarbonate type with back plate including with 09 watt LED Lamp for batten fitting, complete all as specified and directed.

Supply and fix socket type(2 Module) electonic fan regulator flush type ISI Marked, complete all as specified and directed.

Taking down and re-fixing/ hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified

Taking down and refixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified

S&F sheet metal enclosure SPN 240 Volts having 2 pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and directed.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way, complete all as specified and directed.

S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for With one No 100 Amp 10 KA TPN MCCB as incoming, complete all as specified and directed.

Supply fixing and replacement of MCB Single pole"C" series 5-32 Amps ISI marked, complete all as specified and directed.

Supply and Fix MCB Single pole & neutral "C" series 40 Amps ISI marked, complete all as specified and directed.

Supply and Fix MCB Single pole & neutral "C" series 63. Amps ISI marked, complete all as specified and directed.

S&F bldg security LED Light Luminaire of 25 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length(or bracket as approved by GE) including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.

Suppling, fixing and Replacement of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F in replacement LED light fitting 1 X 20/22 watt (4 feet), warm flame decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete and incl taking down old UNSV fitting all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing repair electronic driver as per sample for LED fitting up to 15watt, complete all as specified and directed.

Supply and fixing repair electronic driver as per sample for LED fitting up to 36watt , complete all as specified and directed.

Taking down and refixing sheet metal enclosures 240/415 volt with suitable rated bus bar for double door IP-43 DB's SPN 8/4 way/ TPN of any make and connceled in wall or fix on surface with nuts and accessories, complete all as specified and directed.

Supply and fixing MCB TPN C Curve 125 Amps, complete all as specified and directed.

Supply and fixing MCB TPN C Curve 100 Amps, complete all as specified and directed.

Supply and fixing MCB TPN C Curve 63 Amps, complete all as specified and directed.

Fixing old serviceable LED batten fittings 20/22 watt, complete all as specified and directed.

S&F LED bulk head light10 watt complete with all accessories pre wired and including connecting up to fiting with flexible cable of suitable size, complete all as specified and directed.

M&L in repairs sub main wiring (FRLSH) with PVC insulated and unsheathed 6.00 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit fixed on surface ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6.00 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and directed. Note :- Three runs of cable 6.0 Sqmm and one run PVC conduit shall be measured as one unit length.

M&L in repairs sub main wiring (FRLSH) with PVC insulated and unsheathed 4 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit , concealing in walls ( by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and directed. Note :- Three runs of cable 4.0 Sqmm and one run PVC conduit shall be measured as one unit length.

M&L for repair, Servicing /rewinding of submersible/pressure pump any type of capacity upto 3 HP, single or three phase, any make incl connection, testing complete all as specified and directed in the location of chari, chordiya, LSL & DKD complete all as specified and directed

Taking down old steel/ PVC conduit pipe in sub main wiring and Supply and fixing in repair PVC conduit 20/25mm ISI (MMS) grade with clamps and accessories, complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit, complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit, complete all as specified and directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit, complete all as specified and directed.

Supply and fixing repair Street light bracket made out of medium grade GI Pipe, bent to shape including GI Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting all as specified and directed by Engr-in Charge.

Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 25 sqmm 3.5 core all as diredted by Engr - in - charge. Note : Earth work and brick work measured and paid separately

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep, getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading , leveling , watering and well ramming in layer n. exc 25 cm complete all as specified and as directed.

Removal of excavated soil from excavated place and deposting at safe side distance not more than 50 meter from excavated place all as directed

Supply and laying Un reinforced Precast concrete cable cover, flat size 300 mm x 180 mm x 40mm all as directed

Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured.

Supply and fix GI tubing medium grade of 40 mm dia for cable protection and accessories all as specified and directed by Engr-in-charge.

Supply and fixing repair Test point terminal block made of gun metal or phosphorous bronge 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point completed all as specified.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete )

Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs/Replacement unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (iii) Makes of materials will be approved by GE in writing before commencement of work.

Nvimal Engineers and Contractor

Sai Ram Electricals and Refrigeration Works

M/S SHREE BHAIRAV NATH ENTERPRISES

M/S KAUTILYA GARG

GITANSH ENGINEERS AND COMPANY

mahalaxmi enterprises

new india engineers

Shri Maruti Trading Co.