REPAIRING AND RENOVATION OF LABORATORY IN COLLEGE OF RENEWABLE ENERGY AND ENVIRONMENTAL ENGINEERING AT SDAU S.K.NAGAR

Demolition of Brick work and stone masonry including stacking of

1 serviceable materilas and disposal of unserviceable materials with 2 557.32 CMT

all lead and lift.(ii) In Cement Mortar.

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable

2 material and disposal of unserviceable from site of work with all 8 19.69 SMT

lead and lift

(i) Half brick masonry in common brunt clay building bricks having

3 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 4 613.91 SMT

(1- Cement : 4 -coarse sand ) in foundation and plinth

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand) (a)Ground floor

Providing powder coated aluminium partition frame size of 47mm

5 x44mm fixing with wall in charge 72.00 3600.00 SMT

Providing & fixing partly paneled partly glazed door of size section

6 frame of 1.00 kg/Rmtweight with 5mm fastening . 7.00 4800.00 SMT

Providing & fixing Door closer with necessary all fixtures &fasteners

7 etc complete as directed by engineer in charge 3.00 2500.00 NO

Providing & fixing granite stone average 18 mm thick machine-cut &

machined polished stone in treads of steps, sill, copings, parapet

top, window sill, planter top, and such other locations, laid on

mm(average) thick cement mortar 1:4 (1 cement:4coarse sand) and

jointed with Super flex guranted fixing solution by kerakoll mixed

with pigment to match the shades of the slabs, including rubbing

and polishing complete. The Stone used should be in one single long

piece up to 3000 mm as per drawing or as directed by Engineer-in-

charge. The exposed projected edges shall be of uniform thickness

and of uniform projection including molding , chamfering, rounding,

polishing complete.

Providing and fixing 25 mm thick shutters for cupboards etc.

9 including anodised alluminium butt hinges with necessary screws. 37.00 3148.47 SMT

(A) Indian teak wood. (i) Fully Panelled.

P/F wall Panelling Providing and Fixing 4mm thick external grade

aluminium composite panel over plaster with ms frames of 35 x

MS Pipe with two coat primer as directed by Engineer - in - charge

properly screwed over plaster. ACP should be properly fixed and

10 screwed with the frame and all joints to be filled and finished with 41.00 3468.00 SMT

silicone in pattern suggested by the architect with tray system.

architects instructions. rate includes acp, ms frame, fixtures, fittings,

scaffolding, etc. complete .

Description of Item Qty. Rate Per Amount

Providing and fixing PVC Printed pain colour false ceiling with grid

type with alluminium frame consisting of 600mm x 600mm 3mm

thick plain PVC sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x 1 (235 x 25mm,

gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x

600mm) The alluminium frame work is supported from the cceiling

with the help of G.I. hook and G.I. wire/6mm M.S. rods of required

sizes to maintain proper level etc. The aluminium frame work is

supported on side wall with the use of alluminium L section of size

x 1 (25 x 25mm) angles etc. complete as per direction of Engineer in

charge. Manufactures specification and drawing.

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning,

oil,grease, dirt and Painting two coats (excluding priming coat) on

12 new steel and other metal surface with enamel paint, brushing, 18.00 126.86 SMT

interior to give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and other

foreign matter.

providing & applying three coats (first coat with water base primer,

second cote acrylic paint with brush and final coat with brush and

roller) of external100% acrylic paint "apex ultima" from Asian paint

or equivalent approved with brush on exterior surfaces at all heights

& all places including scaffolding to give even shades including

thoroughly brushing the surfaces free from mortar dropping and

13 other foreign matter and sand papered smooth etc complete as per 440.00 140.00 SMT

the manufacture's specification & to the satisfaction of engineer in

charge or architect. ( newly plastered surfaces shall require three

coats - first coat with 100% dilution & two coats with 40% dilution

or as specified by paint manufacturer).

Providing and fixing stainless steel Laboratory sink of Nirali or

Navkar make with overall size 535mm x 460mmx 200mm deep

having bowl size 460mm x 385mm x 200mm with cement mortar

1:3 etc. complete. Rates Inclusive of 32 mm dia.CP brass waste

coupling and 32 mm dia rigid pvc waste pipe up to. N.T.

Providing and fixing screw down bib taps of following size.(B) Brass

15 chromium plated screws down Bib Tap. (i) 15mm dia 4.00 184.98 NO

Providing and fixing Gun metal check or non-return fullway wheel

16 valve.(C) 25mm dia 2.00 416.47 NO

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

17 seal for potable water of following dia. nominal bore tube fittings 14.00 168.67 RMT

and clamps including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

Description of Item Qty. Rate Per Amount

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

18 seal for potable water of following dia. nominal bore tube fittings 12.00 251.31 RMT

and clamps including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

providing and fixing to wall, ceiling and floor, SWR quality, heavy

duty 6KG/RMT pvc pipes of finolax / astral or equivalent make as

approved by eic,, open laid for soil / waste / rain water etc

complete, with necessary specials, bends, such as Y junction T

junction (both single and double) including plugs, shoes, cowls

flange compression type fittings, wall clips, in proper line and level

with necessary support like split clamps of chilly make 3mm

19 minimum thickness fixed with approved anchor fasteners of HILTI 14.00 530.00 RMT

equivalent ,RCC or brick pedestals or battens if necessary to wall,

ceiling and floor, open laid complete jointing with suitable grade of

good quality solvent cement (as recommended by the

manufacturer) including testing, cutting, making good the wall,

ceiling and floor, etc complete to the satisfaction of EIC of the

following OD (G) 75 mm 6 Kg.F/cm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self

20 cleansing design with C.I scread down or hinged grating including 4.00 711.11 NO

the cost of cutting and making good the walls

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less

than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

21 sand :4-graded stone aggregate 20mm size) foundation concrete 4.00 2903.89 NO

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line

Total Rs.