Repairing & Renovation work in bodakdev Zonal office in Bodakdev ward in North West Zone. (Re-invite)

Name of Work:- Repairing & Renovation work in bodakdev Zonal office in Bodakdev ward in North West Zone. (Re-invite)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation upto 1.5 m depth including sorting out and stacking

1 of useful materials and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

1.a 10 Upto 1.5 mt Depth 201.81 Cmt

1.b 10 1.5 to 3.0 mt.depth 222.72 Cmt

2 10 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 286.20 Cmt

thickness including watering, ramming and consolidating etc. complete.

3 Providing and laying cement concrete1:5:10 (1-Cement:

5- coarses sand and:10-hand broken stone aggregates 40mm

1 nominal size) and curing complete excluding cost of formworkin 2492.51 Cmt

(A) Foundation and Plinth.

4 1 Providing and laying cement concrete1:4:8 (1-Cement: 2653.67 Cmt

4- coarses and:8 hand broken stoneaggregates 40mm nominal size) and

curing complete excluding cost of formworkin (A) Foundation and Plinth

5 Providing and laying cement concrete1:3:6 (1-Cement: 3- coarses

sand and:6-hand broken stone aggregates 40mm nominal size) and

1 curing complete excluding cost of 2976.00 Cmt

formworkin (A) Foundation and Plinth.

6 1 Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse 4006.15 Cmt

sand:6-crushed stone aggregates 20mm nominal size) and curing

complete including cost of formwork in (A)

wall caps/coping

7 Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm nominal size)

curing complete excluding cost of formwork

and reinforcement.

7.a 5 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

7.b 5 Slabs, landing, shelves, balconies, lintels, beams, girders 4012.47 Cmt

and cantilivers upto floor two level

7.c 1 Independent piers, columns, and pillars, upto floor two level 3661.30 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregates 20 mm nominal size) for

reinforced concrete chhajjas not exceeding 10 cm. thickness upto

8 5 floors two level including finishing the exposed surfaces with 6487.07 Cu.M.

cement mortar 1:3 (1 cement : 3 find sand) to give a smooth and even surface

centering and form work and curing complete excluding cost of

9 Providing and laying controlled cement concrete / Ready Mix Concrete

of M-200 and curing complete, excluding the

cost of form work and reinforcement for reinforced concrete

9.a 5 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

9.b 5 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

9.c 5 Slabs,landing,shelves,Balconies Lintels, Beams, Girders and 4460.36 Cu.M.

Cantilever upto floor

9.d 5 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

9.e 5 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

9.k 5 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size) and

finishing smooth with curing etc. complete including the cost of form

10 5 work but excluding the cost of reinforsement for R.C.C work in (iv) 6241.78 Cum

Slabs having more than

13 cm and upto 15 cm.thickness

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) exposed work with

11 curing etc. complete including the cost of formwork but excluding the cost of

reinforsement for R.C.C

11a 5 (i) Slabs upto 8cm thickness 9447.57 Cum

12 Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(A) Modular

12.a 100 (A) Conventional 4011.66 Cmt

12.b 100 B) Modular 4345.02 Cmt

Extra Rate for brickwork in Above Item for super structure above plinth

level upto floor two level (B) Conventional

13.a 10 (A) Conventional 272.25 Cmt

13.b 10 B) Modular 262.35 Cmt

13.c 10 C) above floor two level Item No. 2(6.13) (A) Modular 42.66 Per Floor

13.d 10 D) above floor two level Item No. 2(6.13) (B) Conventional 40.09 Per Floor

Providing and laying in position Ready Mixed M250 grade concrete for

reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of centering shuttering

14 1 finishing and reinforcement including cost of admixtures in 4853.56 Cmt

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-

15 1 Cement : 5 coarse sand ) in foundation 583.49 Smt

and Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth level

upto floor two level

16.b 1 (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as to give a rough

finish including centering, shuttering, strutting and propping etc. height

of propping and centering below supporting floor to celling not

17 exceeding 4 M & removal of the same for in situ reinforced or plain

concrete work upto floor four level

17.a 1 Foundation, footings, bases of columns etc. and mass 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings and

the like. (1) Floors etc. upto 200 mm in thickness. Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs Landings

17.c 1 and the like. (2) Floors etc. above 200mm in thickness. Smt

Vertical surface such as walls (any thickness) partitions and the like including

attached buttresses & string course & the like. Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers, Girders,

17.e 1 Bressumers And Lintels Not Exceeding 1 M In Smt

17.f 1 (G) Columns PillarsPosts and struts. (1) Square Rectangular 297.68 Smt

Polygonal in plan.

17.g 1 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders

Bressumers and Lintels exceeding 1M.in Depth. Smt

1 Providing and fixing 35 mm thick panelled, glazed or panelled

and glazed shutters for Doors windows and clear story windows including

18 anodised alluminium But hinges with necessary screws and indian

teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

19 1 Providing and fixing 25 mm thick shutters for cup boards etc. 3006.75 Smt

including black enamelled M.S. butt hinges with

necessary screws.(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for cupboards etc. including

a 1 anodised alluminiu butt hinges with necessary screws. Smt

(A) Indian teak wood. (ii) Fully Glazed.

b 1 Providing and fixing 25 mm thick shutters for cupboards etc. including 2814.42 Smt

anodised alluminiu butt hinges with necessary screws.

(A) Indian teak wood. (ii) Partly panelled and partl glazed.

1 Providing and fixing glazed louvered glass windows and 4102.54 Smt

20 ventilators with teak wood frame 10 cm. x 7 cm. size including 3 coats

of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows and

ventilators with teak wood frame 10 cm.x7 cm. size including

21 1 coats of oil painting to wood work etc.complete.with wooden 4332.47 Smt

louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames 10 cm

x 7 cm. size including anodized alluminium fixtures and

22 1 fastenings including primer coat of approved quality and two coats of 4595.06 Smt

oil painting etc, complete.(ii)

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames 10 cm x

cm. size including black enamelled iron

23 1 oxidixed fixtures and fastenings including primer coat of approved 5285.45 Smt

quality and two coats of oil painting etc, complete.(ii)

Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of

a 1 approved quality and two coats of oil painting etc, complete. (iii) Partly 4940.25 Smt

panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC

DOOR SHUTTER consisting of frame made out of M.S.tubes of 19 gauge

thickness and size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for top

and bottom rails.M.S. frames hall have a coat of steel primers of

approved make and manufacture, M.S. frames hall be covered with

mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm formings

tiles, and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail and bottom

rail on either side, and 10 mm (5 mm x 2) thick,

20 mm wide cross PVC sheet as gap insert for top rail and bottom

rail, Panelling of 5 stiles and rails with 30 mm wide x 5 mm thick PVC

sheet beading on eighter side, and joined together with solventcement

adhesive,. An additional 5 mm thick PVC strip of 20 mm width is to be

stculkon the interiors side of the ‘c’ channel using PVC solvent

cement adhesive etc. complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonal 20 x 5 mm size

with top and bottom rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys

25 1 complete with bolts, nuts, 5391.23 Sq.M.

locking arrangements, stoppers, handles, including a priming coat

of red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame

and diagonal braces of 40x40x6 mm angle iron, 3.15 mm M.S.gusset

plates at Junctions and corners 25 mm dia. pulley, 40x40x6 mm

26 10 angle and T-iron guide rail at top and bottom respactively with 3652.12 Sqm

handles, stoppers and locking agangement etc, including applying a

priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section

at 114.3x44.45 mm at (1.37kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality fixed with glazing chips

on upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded aluminum

Colour r Powder Coated section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x

,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size

28 10 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 2119.14 Sq. M.

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent Approved

Rate)Frame section of 63.50 x

29 10 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing 5 mmthick 1950.00 Sq. M.

approved color Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section of

size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, or equivalent

30 10 @ Wt.0.643 Kg/mt) with colour 1163.92 Sq. M.

anodized alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated

alluminium frame with 5 mm thick transparent bronze colour tinted float

31 1 glass as details etc complete for Fix 2141.88 Sq.M.

Providing and laying 40 mm thick marble chips flooring rubbed and

polished (I.E.terrazo) to granolithic finish with under layer 30 mm thick cement

concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded stone aggregate

mm and down gauge) and to player 10 mm thick with white, black or white

and blak marble cihps of required sizes from 1 mm to 4 mm nominal size laid

in cement marble powder mix 3:1 (3- Cement:1-Marble powder by weight)

in proportion of 4:7 (4- Cement: 7-marble chips by volume) (C)

Medium Shade pigment with approx 50% white cement and 50%

ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and

polished to Granolithic finish to player 6 mm white, black or white and

black marble chips of size from smallest to 4 mm nominal size laid in

cement marble powder mix 3:1 (3-Cement: 1 marble powder by

33 1 weight) in proportion of 4:7 (4-cement marble powder mix: 7-marble chips by 869.40 Sqm

volume) (B) Light shade pigment with white cement (In top layer

1 Providing and laying white glazed tiles 6mm thick in flooring treads of steps 908.17 Sq.M.

34 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush

1 Providing and laying Ceramic tiles 6 mm thick in flooring treads of 960.47 Sq.M.

steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1- cement

35 :3-coarses and) finishing with flush

pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite

Board with Computerised Golden Letters Discription as per

36 1 instructions of engg. in charge to M.S. frame structure for 4304.00 No.

Inaugaration & Public Handover Function

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring

treads of steps and landing laid on a bed of 12 mm thick cement mortar

37 1 1:3 (1-cement:3-coarses and) finishing with flush pointing inwhite cement. 1469.91 Sq.M.

1 Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting 1130.15 Sqm

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

38 cement: 3-coarse sand) and jointed

with white cement slurry

1 Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of 1523.61 Sqm

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3- coarse

39 sand) and jointed with white cement

1 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads 1062.50 Sq. M.

of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

40 cement : 3-coarse sand ) finishing with

flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm th.Double

Charged Gloosy / Matt tiles of Approved make as Approved by

Adl.C.E. / Consultants for upto 10 cm high skirting as approved by

41 1 Engineer in charge over 10 mm thick cement mortar 1:6 (1 cement : 6 165.00 Rmt

coarse sand)on new surface& jointed with colour cement slurry incl

with flush pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-

coarses and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid

42 1 over and jointed with grey cement slurry mixed with pigment to match 982.83 Sq.M.

the shade of slab including rubbing and polishing etc. complete. (A) 25 mm

Providing and laying marble stone slab flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 -

43 1 coarse sand) laid and jointed with gray cement slurry including rubbing and 2194.63 Sq.M.

polishing complete.

(A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-

44 1 coarses and) or L.M.1.1.5 laid over and jointed with grey cement 1085.48 Sq.M.

slurry including rubbing and polishing etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in risers of

steps, skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

Cement :3 coarses and) and jointed with gray cement slury mixed

45 1 with pigment to match the shade of slab including rubbing and 1176.03 Sq.M.

polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-

coarses and:4-graded stone aggregate 20mm nominal size) laid in

46 1 one layer and finished with a floating coat of neat cement. (A) 40mm 297.68 Sq.M.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-

coarse sand:4-graded stone aggregate 20mm nominal size) laid in

47 1 one layer and finished with a floating coat of neat cement. (B) 50mm 348.08 Sq.M.

Providing and laying broken china mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

48 1 using white cement including rounding off junctions and extending them 739.89 Sqm

up to15 cm along the wall, clearing with water and oxalic acid

etc.as directed.

Providing and laying coloured glazed tiles of the size

300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in skirting, risers

49 1 of steps and dedo on 10 mm. thick cement plaster 1:3 (1cement: 3 1426.95 Sqm

coarse sand) & jointed with white cement slurry.

1 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J 719.93 Sqm

or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer

50 or G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses.(1) 0.80 mm thick sheet

Providing and fixing 150 mm wide 450 mm over all semi circular plain

G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm size Bolts, Nuts,

51 1 washers etc. including making necessary connection with rain water 555.71 Sqm

pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment with bitumen

felt consisting of second and fourth course of blown/ bitumen or/and

residual bitumen applied hot at

1.2 kg.per Sq.M.of area for each course and first course with fibre

base bitunen saturated under lay type land third course with fibre base

52 1 self finished felt type 2 grade 1 and fifth and final course of stone grit 6 466.84 Sqm

mm and down size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

1 Providing and fixing on wall face C.I. Rain water pipe including filling the 283.62 Rmt

joints with spun yarn soaked in neat cement slurry and cement mortar

53 1:2(1- Cement : 2-fine sand) (A) 75

Providing 15 mm thick cement plaster in single coat on Rough

(Similar) side of single or half brick walls for interior plastering up to

54 1 floor two level and finished even and smooth in (i) Cement mortar 1:3 (1- 174.83 Sqm

cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat of

55 1 C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1- 297.68 Sqm

cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over and

including a primary coat of white washing to give an

56 1 even shade after through brooming the surface to remove all dirt, dust, 12.29 Sqm

mortar drops and other foreigh matter.

1 Removing dry or oil bound distemper by a washing 11.19 Sqm

57 and scraping and sand papering the wall surface smooth including

necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and manufacture

(two coats) and of required shade on wall surfaces of given an even

58 1 shade, over and including a priming coat of whiting after 46.94 Sqm

thoroughly brooming the surface free from mortar dropping and other

foreign matter.

Distempeing (Two coats) with oil bound distemper of approved

brand and manufacture and of required shade on wall surfaces to give

an even shade, over and including a

priming coat with distemper primer of approved brand and

59 1 manufacture after thoroughly brushing the surface 76.08 Sqm

free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered

Extra Coat for Above Item over above for every

subsequent coat of approved brand and manufacture. Sqm

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

61 1 even shade including throughly brushing the surface free from mortar 78.44 Sqm

droppings and other foreign matter and sand papered smooth.

1 Extra over item for every sub sequent coat of wall painting 33.39 Sqm

with plastic emulsion paint of approved brand

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,

63 1 grease, dirt and other foreign matter and scoured with brushes 34.34 Sqm

fine steel wood, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleaning the

64 1 surface of all dirt, dust and other 86.94 Sqm

foreign matter.

Painting one coats (excluding priming coat) on previously painted

steel and other metal surface with enamel paint, brushing to give an

65 1 even shade including cleaning the surface of all dirt, dust and other foreign 54.35 Sqm

66 1 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an

67 1 even shade including cleaning the surfaceofalldirt,dust and other 64.66 Sqm

foreign matter.

Painting one coats (excluding priming coat) on previously printed

steel and other metal surface with synthetic enamel paint, brushing to give

68 1 an even shade including cleaning the surface of all dirt, dust and other 43.79 Sqm

foreign matter.

69 1 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on external surface of

new rain water, soil, waste and vent pipes and fittings with ready

70 1 mixed bituminous brushing, black, anti corrosive to give an even 20.16 Sqm

shade including cleaning of all dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external surface of

new rain water, soil, waste and vent pipes and fittings with ready

71 1 mixed bituminous brushing, black, anti corrosive to give an even 25.05 Sqm

shade including cleaning of all dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood and wood

based surface with enamel paint, interior to give an even shade

72 1 including cleaning the surface of all dirt, dust and other foreign matter 26.78 Sqm

sand papering and stopping. (a) Ready mixed paint brushing wood primier

Painting one coats (excluding priming coat) on previously painted

wood and wood based surface with enamel paint, to give an even

shade including cleaning the of all dirt, dust and other foreign matter.(b)

73 1 Ready mixed paintbrushing priming for 26.78 Sqm

74 1 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and wood

based surface with ready mixed paint, brushing, oil, gloss, semi gloss to

75 1 give and even shade including cleaning of all dust, dirt and other foreign 104.12 Sqm

matters and papering and

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

76 1 brushing the surface to remove all dirt, and remains of loose powdered 113.40 Sqm

materials.etc complete

Applying two coats of Birla (white cement based) or Asian

(acryliclapy-putty) or equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

77 1 thoroughly brushing the surface free from mortar dropping and other 40.19 Sqm

foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously painted wood and

wood based surface with enamel paint, to give an even shade including

78 1 cleaning the of all dirt, dust and other foreign matter. 55.13 Sq.M.

1 Writing letter or figures on any surface with black japan paint (stops, 3.15 per letter

comas, hyphens and the like not to be measured and paid for per

79 separately) (i) Block

(Letters/Figures) (Per 10 Letter pet CM.HT)

Demolition including stacking of serviceable materilas and disposal of

80 1 unserviceable materials with all lead and lift. (i) Cu.M.

1 Demolition of Brick work and stone masonry including stacking of 544.95 Cu.M.

81 serviceable materil as and disposalof unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

82 1 serviceable materil as and disposal of unserviceable Sqm

materials with all lead and lift.

1 Dismentaling of sheet roofing including ridges, Hips, Valleys, 47.25 Sqm

Gutters etc. stacking of serviceable materil as and disposal of

83 unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

1 Dismentling steel work including distempering and 2.42 Kg.

stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, hold fasts and other attachment etc.

85 1 complete and stacking the material within all lead and lift.(i) Not exceeding 185.85 Each

3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves,hold fasts and other attachment etc.

86 1 complete and stacking the material with in all lead and lift.(ii) Exceeding 248.85 Each

3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and also

including dismentling fencing posts including all earth work concrete in base

and making good the disturbed ground stacking useful materials as

87 1 directed and disposing 66.15 Rmt

as directed and disposing of the unserviceable materials

with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with

88 1 fittings and clamps including stacking the materials Rmt

with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe

89 1 an type, flushing tank etc. including stacking the Each

materials with all lead and lift

Scraping oil paint from steel and other metal surface and making the

surface even (with Hand Scraping.) Smt

Removing and scraping of old deteriorated plaster of any thickness

from wall / R.C.C member including

91 1.00 stacking of serviceable material and disposal of unserviceable 19.38 Smt

from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size as

92 1 specified in existing R.C.C. slab including cutting Each

chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning out, wetting,

grouting with cement and sand slurry 1:3 (1-cement

93 1 3-sand ) Rmt

Cutting out cracks roof terrace to V-Section cleaning out and

94 1 filling solidly with a hot mixture of bitumen and clean dry sand (1:1 Rmt

Providing & Fixing in position Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium)(a) Frame sections

101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing chips on upper

pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)

etc.comp.as direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed

/ Fully Glazed Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg. In

charge.(Jindal alluminium )(a) Frame sections 101.6x44.45 mm b) Shutter

vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)( at 1.31 kg/mt)

© Shutter bottom section at 114.3 x44.45mm at ( 1.37 kg/mt ) Shutter

96 1 middle section at 100x44.3 wt. (1.37 kg/mt ) incl. providing & installing 5 4583.00 Sq.M.

mm thick Glass of standaed quality fixed / 12 mm thick Laminated

sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp. as per

Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4 track sliding

/ fix type with frame using approved

anodised extruded alluminium section as approved by Engg.

97 1 In charge.(Jindal alluminium) units equivalent. including P/F 4518.00 Sq. M.

installing 5 mm thick clear/tinted Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent Frame

98 1 section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing & 4218.00 Sq. M.

Installing 5 mm thick Glass of standard quality etc. comp.

Providing and fixing of Ridge flashing for roof panel shall be made

out of 0.5 mm thick pre coated GI sheet. The Pre coatedsheet shall

be of minimum 240 mpa steel grade confirming to IS 14246:1995 and

shall have zinc coating of minimum 120 gsm as per IS:277:1992,

5-7 microns epoxy primer on both side of the sheet and polyester top coat

15-18 micron. The PP GI Sheet shall have plastic protective guard

99 1 film of minimum 25 microns to avoid scratches during 510.10 Sqm

transportation. The ridge shall be fixed to the steel members by

poprivetor self drilling/self stitching fastners @ maximum 450mm

c/c along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-

100 1 2 mm thickness as per directed by engineer incharge etc as 963.00 Smt

completed (N.S.)

Providing and laying 15mm bamboza wooden flooring as per

architect's drawing with all necessary details as directed by the

101 1 project consultants. Use underlay for better result as per Detail 2690.00 Smt

specifications and directed by the project consultants. (N.S.) Approved Rate

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long

M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting 3 coats fixed at

2.5 Mt, C/c. with five Horizontan lines and two diagonals of

102 1 galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained 385.40 Rmt

and fixed to posts with G.I, staples including fixing the posts in ground

with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

1 Renovation and Repairing work in Chainlink fencing any size and 735.00 Rmt.

also refixing work incl. febrication work with all materails to be

103 painted one coat of primer and twocoats of

paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over

B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm.

104 1 thick cement plaster to masonry / in C.M.1:3) and cement concrete 2235.66 Rmt

flooring in 1:2:4: mix

5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B. Masonry walls 23 cm. thick in C.M. (1:6) with

105 1 (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble 933.98 Rmt

chips set in C.M. (1:6) (6 mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for below

ground level to vertical upto any floor with delivery & suction Pipe &

106 1 Pump etc. The rate includes fule, pump operator, skilled labor, driver etc 760.00 Cmt

completed and as per direction

of engineer in charge

P/A Tremix with dewartering machine and floater machine on

constructed CC work for finishing the surface as

107 1 per requirement. The rate including all machinaries, labor, loading, 54.00 Sq.M.

unloading, transportaion etc complete as per direction given by

engineer incharge.

Carrying out timber treatment to all wood work including drilling holes

and spraying oil based chemical solution on surface of timber work for

termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by mass)

is recommended one litre chemical emulsion diluted with 19 liters of

kerosene. Total diluted concentration will be 20 liters inclusive of 1

liter chemical emulsion application in drilled holes and 0.75 / Litre chemical

per one Sqmt two coat on wood surface not protected by paint or

Applying general insecticide pest control treatment to floors, cupboards

etc including labour materials etc. complete. Using Imidacloprid

SCas Per IS 6313 part -II( (0.075% concentration by mass) is

109 1 recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre 88.40 Smt

chemical /Sqm of surface

is recommended as per I.S.

Carring out plinth treatment to post construction / existing structure

by spraying chemical solution for termite control treatment including

labour and material consist ment with

I.S. specification. Using Chlordene and Chior purfiles 20 EC. As

110 1 Per 6131_paret-II Consentration Weight on percentis recommended 104.90 Smt

i.e one litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one

litre chemical emulsion appication attherate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos

20 ECAs per IS 6313 part - II (1% concentration by mass) is

recommended i.e one litre chemical emulsion diluted with 19 liter oil

111 1 base. Total solution will be 20 liters inclusive of one liter chemical 37.34 Smt

emulsion application at the rate of 7.5 litre chemical / Sqm of surface is

recommended as per

1 Providing erecting and fixing double coated Syntex or equivalent 3.91 Litre

PVC.(ISI) water tank of required capacity each with all necessary fittings

112 and connection etc. complete

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

113 including making good the wall ceiling and

114 Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earth work

in trenches to be measured and

paid for separately)

115 1 Making connection of galvanised Mild steel distribution branch with 600.08 Each

galvanised mild steel main 50 mm to 80 mm nominal bore by

providing and fixing tee including cutting and

threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working

pressure poluthene pipes of the following out side Dia. Low

densidy, complete with special falnge compression type

116 fittings,wall clips etc.including making

good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working

pressure polythene pipes of the following out side

117 Dia. Low densidy, complete with special falnge compression

type fittings, wall clips etc. including making good the wall ceiling and

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls

118 1 and floor 100 mm inlet and 50 mm 600.08 Each

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian type

W.C.Pan) size 580 mm (Earth work, bed concrete, foot rest and

119 1 trap to be measured and paid for separately) 926.10 Each

(A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous China

European water closet with integral P trap of "Cera" - Clair

120 1 Series or equivalent incl. seat cover , Chair Bracket etc. complete as per 4250.00 No.

direction of engg. In charge.(N.S.)

1 Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " 1850.00 No.

Hindware" incl. C.P. Brass waste coupline , waste pipe, pvcconnection

121 etc. Complete.( size 635 x395x420

Providing & Fixing Angle cock of " Ess Ess" - Trend series or

122 1 equivalent standard make as approved by engg. in 675.00 No.

charge all complete. (N.S.)

1 Providing and fixing 100 mm size P or S trap for water closet 311.85 Each

squatting pan including jointing the trap with the pan and soil pipe in

123 cement Mortar1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

1 Providing and fixing 600 mm x 450 mm bevelled edge mirrror of 825.48 Each

superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and

124 fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of approved

quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash basin with

signle hole for pillar tap of "Cera " - Concord series of 550 x425

mm size to be fiited in stone counter with necessary brackets painted

white incl. cutting holes and making good the same .Cost Includes

126 1 P/F C.P. brass waste coupline, 32 mm dia fisher union ,15 mm dia. Pillar 2950.00 No.

cock & Angle cock of " Ess Ess"- Trend series ,32 mm dia. Waste

pipe etc. complete as per dir. of engg. in charge.

Providing & Fixing S.S.304 Grade Sink of Nirali /

127 1 Krishna or Equivalent Make for Kitchen Platform of size : 4650.00 No.

24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with

128 1 C.P.brass brackets fixed to wooden plugs with C.P. brass scews.(B) Each

600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P.

129 1 brass bracket and guard rail complete mixed to wooden plug with Each

C.P.brass screws.

130 1 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright.

20 (i) 15mm dia. 184.98 Each

20 (ii) 20mm dia. 212.68 Each

132 Providing and fixing screw down bib taps of following size. (B)

Brass chromium plated screws down Bib Tap.

20 (i) 15mm dia. 184.98 Each

20 (ii) 20mm dia. 212.68 Each

133 Providing and fixing screw down bib taps of following size. ©

Gun metal screw down bib tap.

20 (i) 15mm dia. 157.29 Each

20 (ii) 20mm dia. 176.09 Each

134 Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts.

20 (i) 15mm dia. 305.67 Each

20 (ii) 20mm dia. 351.18 Each

135 Providing and fixing Gun metal check or non-return fullway

20 (i) 15mm dia. 184.98 Each

20 (ii) 20mm dia. 201.80 Each

20 (III) 25 MM DIA 416.47 Each

20 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock of

140 approved quality including fixing in pipe line etc. complete.

20 (i) 20mm dia. 252.26 Each

20 (ii) 25mm dia. 261.16 Each

20 (iii) 32mm dia. 273.03 Each

141 20 Providing and fixing chromium plated, bottle trap with necessary

couplings of approved quality for wash basin. Each

142 20 Providing and fixing ball cock ofapproved quality as directed. 131.57 Each

(A) Copper Metal (i) 25mm dia.

143 20 Providing and fixing ball cock of approved quality as 101.89 Each

directed. (B)Abonite (i) 25mm dia.

144 20 Filling with good Quality thor as and where directed by the Architect

/ Engineer-in-charge, in sunk in layers of 15 cm. thickness, including

watering, ramming well etc. complete, as directed by the Architect / 3850.00 Cmt

Engineer-in-charge .

145 20 Providing laying and jointing in true line and level 15 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including 71.93 Rmt

necessary fittings etc. including testing of pipe and joints and fixing the same

with solvent, including cost of all materials.adhesive

146 20 Providing laying and jointing in true line and level 25 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be 90.93 Rmt

concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost

of all materials.

147 20 Providing laying and jointing in true line and level 32 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including 117.97 Rmt

necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

148 20 Providing laying and jointing in true line and level 40 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including 146.65 Rmt

necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

10 Providing laying and jointing in true line and level 50 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

151 at every two metre C/C or shall be concelled as directed including 193.73 Rmt

necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

1 Providing in line level plumb, fabricating and fixing three row

horizontal barbed wire fencing and punched tape concertina coil of

turns per meter of 610 mm dia fixed with clips on top of the angle iron

posts. The punched tape concertina coil having sharp barbs at every

25 mm spacing shall be 0.5 mm thick and 19 mm width and weighting

kg/100 mt. (Average) as per manufacture's specification. The rate shall

152 also include providing and fixing 1.20 mt.total long MS angle 40 x 40 390.00 Rmt

x 6 mm @3.00 mt.c/c spacing embaded in RCC column, angle posts shall

be painted with one coats of red oxide and two coats of enamel paint of

approved quality at top compound wall.

1 Fixing sun film for protection sunlight in black or any colour as as 850.00 Smt

directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality &

Color / Pattern as per Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0 size using hollow pipe of16

gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon paste

154 1 application for fixing the sheet . Rate also includesnecessary bending, 1930.00 SqM

cutting, labor charges , Zinc Primer coat & Two coats of oil painting of color

as approved by consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S. 400.00 Rmt

Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel, operator,

dirver etc.. ( 12 hours sift day/night) (N.S.) 600.00 Hrs.

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all tools

like bucket drum, showels, trikam, pavadas,

etc,, to carryout different works during monsoon for 12 Hrs. Shift. Work

157 20 shall be carried out as per the instrucitons of Engineer In-Charge.No 1661.02 No.

extra charged shall be paid for night

Roller Blind Providing and fixing Roller Blind curtain fixed on window

level on wooden batten and curtain lift with cotton thin rope, make

of aerolax or equivalent design and colour as per instruction by

158 20 engineer – in – Charge with necessary hardware fitting, material and 3285.00 Smt

Providing & Fixing Door closer - Door closers (Heavy type of 765 474.58 No.

number) Hardwire or Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to 124.74 No.

shape with hooked ends of R.C.C. slabs during laying incl. painting the

160 20 exposed protion of loops, all as per standard

design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

161 20 mortar 1:1 including neat cement finishing, watering etc. Rmt

162 20 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious micro concrete

work in cellings and beams incl.mixture of CEMSCREED

HM (F) fair mate company material, FBR bonding agent

material with water in suItable proportion anti corrosive treatment

163 20 on exposed beam,celling steel bars with safeCore R incl.all kind of labour 530.00 Smt

etc.comp.including three coat of white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps 6800.00 Set

164 20 withmotor and required cable and switch board of approved brand and

make etc.comp.as directed.

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding

bending,binding and placing in position complete upto floor two level

165 20 placing in position complete upto floor two level placing in position complete 75.46 Kg.

upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door shutter

166 20 (sintex door-equivalent) with necessary alluminium fitting 2867.00 Smt

with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish earch 235.51 Cu.M.

167 20 manure or sludge and excavated rock and fly ash,aggregate of

any kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in risers of

steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1

168 20 cement:3 coarse sand) and jointed with gray cement slurry including rubbing & 2690.00 Smt

polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium framing 1688.00 Smt

and making grove as per design and finished with royal plastic paint

169 20 as per instruction of engineer incharge.

Providing and laying 15mm bamboza wooden flooring as per

architect's drawing with all necessary details as directed by the

170 20 project consultants. Use underlay for better result as per Detail 2690.00 Smt

specifications and directed by the project consultants. (N.S.) (Approved Rate

Applying two coats of Birla (whitecementbased) or Asian

(acryliclapy-putty) or equivalent & two coats of primer of approved brand

171 20 and manufacture on new wall surface to give an even shade including 40.19 Sq.M.

thoroughly brushing the surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape evenshade after thoroughly brushing the

172 20 surface to remove all dirt, and remains of loose powdered materials.etc 113.40 Sq.M.

Providing and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face

veneer or plywood face panels, with both side 1 mm laminate

finishing including anodized aluminum butt hinges with necessary

screws. Decorative type and pine wood core anodized minimum 3 no

150 mm long aluminum butt hinges in flush door shutters with 2 no of

brass holdfast 325 mm long 1 no brass tower bolt 250 mm long and two

173 20 no of 150 mm long brass door handle . Decorative both side 4686.36 Smt

laminated Flush door 35 mm thick. with frame of 10 cm x 7 cmt Indian

teak wood frame including all necessary fitting fixtures hardware

screw and adhesive etc fixing up to all lead and lift height up to 45 mtr

from GL etc complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in

charge same as lal darwaja garden pattern consisting of 3'dia. M.S black pipe

'A' class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link

jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle frame 8'x4' size

174 10 with MS flat of size 25x3 mm welded jali etc.comp.The jali is to be welded to 1230.00 Rmt

MS pipe with MS flat as instruction given.The M.S pipe and the M.S angle

frame are to be painted one coat of primer and two coats of paint as directed

in line and level. (N.S)

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb

block for Footpath in M-20 grade using 20 mm nominal size black

trap aggregate of Sevaliya/Timbaor equivalent quality for

pre-cast blocks, reasonablyexposed finish/ formwork

well equippedwith vibratory system for kerb stones of approved

design including curing, etc. complete, including thecost of formwork

etc. complete. The rate shall also include necessary cutting

of asphalt, fixing the Kerbstones in line and level on 5 cm thick sand

175 1 bedding 393.00 Rmt

withnecessary equipments and materials. The rate shall also include

the flush pointing in CM (1:3) for all joints of the kerb stones. Filling of zari

alone the sides of the kerbstone fixed with Bituminous concrete

Bituminousconcrete /

C.C. mixed in proper position to flush withthe road surface as directed

by Engineer in change to form a portable mixture.a) Laying on 5 cm

thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size shape (Usually Uni-

Paver Blocks) using black trap good quality aggragate of 20 mm

nominal size for footpath,parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in charge. Cost includes

formworks using rubber mould, Rate providing and laying paver blocks as

per required grading and specification. The paver block shall be

mechanically compacted. The work of paving blocks shall be executed in

line and level by skill mason of flooring work only. It should be laid in such a

way that the no cutting of the paver block to be necessary. if cutting of paver 429.00 Smt

block necessary then it should be cut by machine only and carting. The

finished surface of the paver block shall have resonably good, plain

finished. Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be allowed

for production. Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction with frame

of first class hard wood with cross board and face veneer or ply wood

face panels, including anodised alluminium butt hinges with necessary

screws. (B) Non- decorative type and block board core anodised alluminium

177 1 butt hinges in flush door shutters (2) 35 mm thick. Labour work for fixing any 1779.97 Smt

kind of paving with cement pointing in CM 1:2, including watering, ramming etc

comp. as dir.For pavement

Box type metal letters forming composite box made from 1mm thick

stainless steel plate of grade 304 having brush finish of following font

size to be fixed at Main Gate in english and or Gujrati and including

178 fixing charges approved before fixing by

clent / consultant.

178.a 1 400mm high 1000.00 Nos.

178.b 1 300 mm high 750.00 Nos.

178.c 1 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per

IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,

other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at

the spacing of 1200 mm centre to centre, to which the ceiling section

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @

179 1 230 mm interval, including fixing of gypsum board to ceiling section and 850.00 Smt

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at

mm c/c, including jointing and finishing to a flush finish of tapered and

square edges of the board with recomme-nded jointing compound

jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer’s specification and also including the cost of

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings,

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x 500 x

mm, Size per color End Cape 350 MM x 175 MM x 50 MM TOP DESIGN -

Lining Top flat ANTI SKID PATTERN FOR GRIP COLOUR :- YELLOW &

BLACK BODY MATERIAL :-

180 1 MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY 2185.00 Rmt.

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX

Bolts with Washer Epoxy for Bolt Fitting etc. complete as directed by EIC .

Providing and fixing PVC/Gpsysum plain colour false ceiling with grid

type with aluminium frame from gypsteel, fastners

,props, Finishing as per architectural drawing allowing openings for

181 1 A.C. Diffusers, Light/Electrical Points etc –complete, Prior to fixing on 933.00 Smt

frame.(Brand : Anutone or equivalent ) (N.S.) or as directd by engineer

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight

182 1 G.T.Stone including fixing of covervSquare mouth trap 1263.15 No.

100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement mortar 1:1

183 1 including neat cement finishing, waterin getc. complete. Rmt.

1 Providing and laying (to level or slopes) and jointing with stiff mixture of 211.05 Rmt.

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including

184 testing of pipes and joints complete.(A) 100mm

1 Providing and laying (to level or slopes) and jointing with stiff mixture of 288.23 Rmt.

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including

185 testing of pipes and joints complete.(B) 150mm

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

186 10 size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 2903.89 Each

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg/Cm2 in

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

187 2 concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished 3624.51 Each

smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep for pipe

line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb having

size of 75 x 300 x 300 mm depth and as per design conveying it to the site,

188 2 jointing into C:M 1:3 and racking out the joints incl. necessary excavation of 219.00 Rmt.

asphalt, soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm high

resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black

189 2 Granitee 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on 754.95 Rmt.

exposed faces of wall in C.M. (1:4)

1 Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or 754.65 Smt

190 weight not less than 7.75 kg. per Sq.M. to window frames etc. including60 x

20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then application of

191 1 15 mm plaster on R.C.C.& masonary joints as per 35.00 Rmt.

dir.of engg.in charge

1 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2- 348.08 Smt.

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat

of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank of specified

capacity, on specified location, for all depths, in controlled CC of M-200

grade with bottom slab, top slab and RCC walls, including cost of

form work and reinforcement,with inside and outside plaster in CM

193 1 :3 and water proofing treatment as per IWP specification,including 6.50 Litre

injection, grouting, etc. complete. The rate includes for providing

and fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole cover/s at

top, including wash out pipe line and inlet and outlet connections etc.

Providing and fixing PVC Printed pain colour false ceiling with grid type with

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC

sheet used as panel insert in a frame work made using anodized alluminium

T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame

194 1 work is supported from the cceiling with the help of G.I. hook and G.I. 300.12 Smt

wire/6mm M.S. rods of required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall with the use of alluminium

L section of size 1 x1 (25 x 25mm) angles etc. complete as per direction

of Engineer in charge. Manufactures specification and drawing.

1 Providing and supplying of labour for necessary manual excavation, 551.00 No

cleaning, Shifting of Material Or any other, or for any other work as

directed by Engineer In charge. The Rate

includes Handcart with Mazdoor

A 1 Mukadam/supervisior/karigar 425.00 No

B 1 Fitter/Plumber/Mason 697.00 No

C 1 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of welding

D 10 rods/gas, Transportation, including carting from site 1500.00 No

E 10 Mazdoor at Day Female 450.00 No's

E 10 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt demolishing

work on site by using operator, fuel, power supply etc.complete as

directed. (no payment should be allowed for non working condition of

machinery and for pipe line excavation and M.H. work. Allowed only for

break down work) (Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

198 water of following dia.

Nominal bore tube fittings and clamps including making good the wall,

ceiling and floor etc. complete.

A 1 15 MM DIA 165.21 Rmt

B 1 20 MM DIA 202.97 Rmt

C 1 25 MM DIA 247.25 Rmt

D 1 32 MM DIA 330.36 Rmt

E 1.00 40 MM DIA 437.66 Rmt

F 1 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for

199 1 Gulley trap (Standard pattern) te weight of cover to 491.80 Each

be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working

pressure polythene pipes of the following out side Dia. Low

200 densidy, complete with special falnge compression type fittings,

wall clips etc. including making good the wall ceiling and floor.

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm Indian Teakwood

Frame and 18 mm Ply Board. With 1 mm thick laminate finish in the front and

mm thick Laminate on Back Side with 12 mm thick Indian teakwood beading. The scope

also include providing and fixing s.s. finish hardware as per the Requirement. The

rate include cost of all labour, material and with all hardware like handle, magnate,

tackels, adhesive, screws, etc.for satisfactory completion of this items.All Exposed

Wood Work shall have

malamine polish etc. complete.

202 1.00 Providing & Fixing Sun Control Reflective Type Film / Frosted Film as Selected by

Architect/ Engg. In Charge For Glass Doors / 646.37 Sq.mt.

Windows etc. as Directed.

203 Providing & Fixing in Position Vertical Roller Blinds with Minimum

% and Maximum 5 % Light Transperace Screen Fabric Incuding Providing &

Fixing of Powder coated G- Channel at the Topof Window with necessary Screw

, Cleats etc. and PVC Roller ( Weight Pipe) and PVC Chain For Up and Down

Movement of Blinds etc. of Approved Make and as per Drawings / Instruction of Engg. in

1.00 Charge For All Colors and Shades. Rates Includes all Lead and Lift For All Floor Level, 1372.03 Sq.mt.

All Height , All Material , Accessories, Fixing , Scaffolding , Labor etc. Complete in

All Respects. All Required Accessories & Material must be From Same Manufacturer.

204 1.00 Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or 1042.78 Sqm

L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I.

Limpet and bitumen washers

205 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup

for all type sections, in framed work, including cutting, hoisting, fixing in position

1.00 and applying a priming coat of approved steel primer all complete as per the 126.68 Kg

structural designs and directions of Engineer in charge.Column ( 122 x 61 x 3.6mm )

206 Providing and applying approved coloured chips 20mm thick STONE CREAT

PLASTER for exterior / interior side on wall up to full height from ground level

consisting of 12mm thick backing coat of CM 1:3 (1 cement : 3 Bodeli sand) and 8mm

thick finishing coat of CM 1:1 (1 cement (Grey / White / Colour : 1 stone grit (approved

coloured chips)) including providing & fixing 300mm wide strip of chicken net at

1.00 vertical and horizontal joints of RCC and masonary including 10mm alluminium 709.60 Sqmt

channel for expantion joint / grooves, curing, necessary scaffolding in true line and

level etc. complete as

directed by EIC.

207 Providing and laying 18 mm thick polished granite stone machine cut in single

piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing, risers & treads,

skirting laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and

jointed with grey cement slurry with matching pigment incl. rubbing and

polishing,half rounding edge and incl. fixing of hilty fastener at every 1/3 span of sill as

required size etc. complete colour and shed as approved by architect

engineer in charge.

208 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm.

10.00 thickness including watering, remming and consolidating etc. complete. 594.61 Cmt

209 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-

1.00 crushed stone aggregates 20 mm nominal size) and curing 4006.15 Cmt

complete including cost of formwork in (A) Wall Caps / Coping

210 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) and finishing smooth

1.00 with,curing etc. complete including the cost of formwork but excluding the 8508.71 Cmt

cost of reinforcement for R.C.C work in (A) BEAMS :(i) Having cross-

sectional area 0.05 to 0.08 Sq.M

211 Providing and fixing complete sliding shutter solid PVC window 25mm thick

factory made glazed solid PVC window shutter consisting of frame made out

of M.S. tube of 19 gauge of size 15 x 15mm for styles top, bottom rail. M.S.

frame shall have a coat of steel primer of approved make and manufacture,

M.S. frame shall be covered with 4mm thick heat mouled PVC ‘C’ channel of

size 58mm x 25mm x 38-mm out of which 8mm shall be bent at 90 degree

towards inner side on front face of the window shutter forming stiles. For top

rail and bottom rails, M>S. frame shall be covered with 4mm thick, 58mm

wide PVC sheet out of which 8mm shall be bent at 90 degree towards inner

side on front face and 38mm wide PVC sheet shall cover the M.S. frame at

top and bottom rail on back side of window shutter, 4mm thick 15mm wide

cross PVC sheet as gap insert for top and bottom rail. PVC sheet beading of

8mm thick (4mm x 2) to be stuck internally with solvent cement adhesive in

top and bottom rails. Glass panel will be fitted externally in the clear space

available between stiles & rails and fixed

between PVC sheet of stiles and rails bent at 90 degree on front face 12mm x

123mm ‘L’ shape outer PVC beading nailed on stiles and rails at theback side

so that ‘L’ shape outer PVC beading can be removed when required for

replacement of broken glass etc. complete as per direction of etc. complete as

per direction of Engineer in charge and

manufactuture’s specification.

212 Providing and fixing PVC Printed pain colour false ceiling with grid type with

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet

used as panel insert in a frame work made using anodized alluminium T

section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern

of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is

1.00 supported from the cceiling with the help of G.I. hook and G.I. wire/6mm 766.00 Sq.mt.

M.S. rods of required sizes to maintain proper level etc. The aluminium frame

supported on side wall with the use of alluminium L section of size 1 x 1 (25

x 25mm) angles etc. complete as per direction of Engineer in charge.

Manufactures specification and drawing.

213 Providing and fixing sheet glass, selected quality (Type-C) bedded in putty

and fixed with wooden beading including the cost of wooden beadings of first

1.00 class teakwood and necessary cutting of glass. 1143.05 Sq.mt.

(1) 5 mm thick.

214 Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.

215 Pointing on brickwork with cement mortar 1:3 (1- cement : 3-coarse sand) (A)

216 Cutting out cracks of roof terrace to V- section , cleaning out, wetting

0.95 grouting with cement and sand slurry 1:3 (1-cement 3-sand ) 64.58 Rmt

217 Acoustic sheet

PET acoustic sheets are high-density, porous sound-absorbing panels made

from polyethylene terephthalate (polyester) fibers. They feature an NRC

rating of 0.75 to 0.95, a density of 180–240 kg/m³, and standard dimensions

R-Value: Approximately 3.0 to 3.3 per inch of thickness.Density Range:

Varies from 30 kg/m³ (lightweight batts/rolls) up to 150+ kg/m³ (high-density

industrial boards and slabs).

Acoustic and Water PropertiesSound Absorption: High open-porosity matrix

yields exceptional noise reduction coefficients (NRC 0.85 to 1.05 depending

21.00 on thickness/density). 3500.00 Sq.mt.

Fire and Thermal SafetyFire

Classification: Non-combustible, Euroclass A1 rating (highest grade).

Gypsum perforated

Perforation and Acoustic

PerformanceHole/Slit Types: Circular (6 mm to 20 mm), square (10x10 mm),

petal, or linear slotsPerforation Rate: Open area ranging from 9.5% to 23% of

the board surfaceAcoustic Backing: Sound-absorbing non-woven acoustic

fleece or tissue on the rear sideNRC Rating: 0.55–0.65 standard; increases up

to 0.75–0.85 when paired with mineral/glass wool infill mats

218 Providing and fixing Anutone / usg / saint govind wall acoustical paneling

using Stretch NRC Fabric fixing with FS 25 Griper system,Strand 2400 x

x 20mm,Tracks ( Perimeter Track , Half wrap, mid seam whatever is

required) fixed directly by staping to the SB25/SB50 which is screw fixed

directly to the wall along the perimeters with backing of Anutone make NSS

SoundSmooth MB Primer 2400 X 600 X 15 mm thick Panels with fixed

horizontal/Vertical to the wall at 300mm c/c & Anutone make Synth PF 25 x

10 with SoundStick S7adhesive used as backing material. As per

manufactures specification. High NRC, class A fire rating,Fire Hazard

Classification of class I or A in accordance with ASTM E-84 or UL-

testing parameters,The colour shade of malamine and veneer as approved by

Architect and as specified by manufacturer including all accessories, material

219 Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with

G.I. J or L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts

14.00 8mm dia G.I. Limpet and bitumen washers 1042.78 Sq.mt.