Karnataka

Financial Eval

Works

Water supply/sewage lines

Construction of New Impounding Reservoir at Government Land Survey No. 115 of Turukanadona village for Drinking water for Turukanadona and Hirapur villages in Raichur taluk of Raichur District

Rural Drinking Water and Sanitation Department

RWSSD Division Office Raichur | Raichur, Karnataka

Amount: ₹4.2 CrCloses: 1 Jun 2026Closed

Timeline

Published22 May 2026
Closed1 Jun 2026
Financial Evaluation—
Award—

Bids

1 Bid1 Jun 2026

#	Company	Amount	Status
1	₹4.1 Craccepted-finance	₹4.1 Cr	accepted-finance

Tender Value

₹4.2 Cr

EMD Value

₹6.3 L

Closing Date

1 Jun 2026, 10:00 pmClosed

Tender Inviting Organisation

Name

Rural Drinking Water and Sanitation Department

Work Description

Construction of New Impounding Reservoir at Government Land Survey No. 115 of Turukanadona village for Drinking water for Turukanadona and Hirapur villages in Raichur taluk of Raichur District

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT10049

Reference Number

RWSSD/2026-27/WS/WORK_INDENT10049

Tender Type

Open

Product Category

Water supply/sewage lines

Location

RWSSD Division Office Raichur

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredContractor Registration Certificate

RequiredAnnual Turnover Certificate from 2021-22 to 2025-26 by CA for Five years along with UDIN Number & Minimum financial turnover civil engineering construction works not less than two times the annual payments from this contract Rs. 832.47 for two financial years

RequiredSimilar Work done certificate 50 percentage financial workdone certificated form not below rank of Executive Engineer in last five years as for Rs. 208.12 Lakhs

RequiredQuantity wise work done certificate 80 percentage form not below rank of Executive Engineer in last five years as per bid document

RequiredUnconditional Line of Credit from Nationalised Bank for Rs.114.00 Lakhs

RequiredPAN & GST Registration Certificate

RequiredIncome Tax Returns/Filed copies

RequiredAccurate postal address, Principal place of address, Mobil Number and email address Pan No, Tin No, should be mentioned clearly

RequiredList of existing commitments and ongoing works

RequiredA Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

RequiredThe contractor own or hire required 50-50 key and critical equipment for this work

RequiredAssessed bid capacity as per Bid Document on letter head duly signed

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidders shall not be under declaration of ineligibility for corrupt and fraudulent practices issued by any State Government/Government of India/Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e- procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No. PW/134/bmS/2007 Dated 27.7.2007, a sum amounting to 1 percentage of the bill amount will be deducted towards Construction Labour Welfare fund.

All rates shall be exclusive of GST, but inclusive of Royalty for minor minerals, Karnataka Building and other Construction Workers Welfare cess ), Shall be included in the rates, prices and total Tender Price submitted by the Tenderer.

The rates quoted by the Contractor shall be exclusive of GST. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law.

Conditional tenders will not be accepted.

GST shall be paid as per the prevailing rates

The work will be inspected by the Third party and the bill will be admitted only after the satisfactory report from the third party along with GPS photos.

Financial Year will be reckoned as the period between first day of April and thirty first day of march of succeeding year (both days inclusive).

The Employer reserves the right to acceptance/reject any or all Tenders without assigning any reason.

The tenderer should maintain the scheme during the defective liability period i.e., one year from the date of completion.

The Department is not responsible for any delay in accessing e-procurement portal.

Tenderer shall note that the Tenders of those found Eligible as mentioned in cause 3 - Qualification of the tenderer in section 2 : Instructions to Tenderers (ITT). Will be considered for evaluation.

The Tenderer shall scan & upload all the original recent and relevant documents required for this bid to the e-procurement portal The Original Documents should be produced at the time of opening of bid for physical verification. If necessary.

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc.,

Period of completion is as mentioned in the bid document, which includes rainy season.

The contractor should follow terms and conations as specified in standard bid document wherever is applicable.

The Contractor should submit 3rd party reports and GPS photos along with the bill otherwise bills will not be accepted.

Bidder should quote the rate excluding GST amount.

The increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The Tenderer at his own responsibility and risk is required to visit and examine the site of works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the works. The cost of visiting the site shall be at the Tenderer own expense.

Bidder should possess Unconditional Credit Line Facility of as per bid document from nationalized / scheduled bank and shall submit the certificate in the prescribed format only issued by the FD on dated 22.08.2022

Conditional LOC will not accept.

Annual turnover for the past five / relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible along UDIN number and should be active.

The documents which are uploaded by the bidder should be well scanned.

All documents related to bid document are to be submitted mandatorily

Corrigendums/modification/correction, if any, will be published in the website only.

If any date in the tender time table is government holiday, next working date will be considered.

Pipes which are used for the work are tested by CIPET report is must for the payment and CIPET payment shall be made by the contractor.

After completion of the FHTC and HTC work, the works to be handed over to the gram panchayat for its further maintenance.

Final bill will be admitted only after the submission of 3rd party report, handing over certificate and completion report with the work display board.

Bidders are bond the guidelines/instruction issued time to time from the government.

This tender is covered under World Bank Guidelines on preventing and combating fraud and corruption in program for results financing dated February 1, 2012 and revised on July 10, 2015 https://ppfdocuments.azureedge.net/3682.pdf. Requirements under these guidelines include but are not limited to 1st the borrowers obligation on informing the World Bank about all fraud and corruption related allegation and investigations, 2nd the World Banks right to conduct administrative inquires, and 3rd Ineligibility of debarred firms for contract awards. The latest firms list of the banks debarred firms is available https://www.worldbank.org/en/projects-perations/procurement/debarred-firms

If the bidder fails to complete the work within the timeline fixed by the department, then, those tenderes EMD/FSD will be forfeited and the contract will be rescinded at his risk and cost.

The Bidder/Contractor must provide the CIPET Test Report for the Pipes in his own cost before starting of work.

Fund for JJM works GOI & GOK Fund 90% and Community Contribution 10%

The work should be carried out in accordance with the standard specifications specified by the department.

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards must be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should make an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost.

Any over writing of civil engineering words and measurements should be clarified the considered department -No claims should be considered.

Corrigendums / modifications / correction, if any, will be published in the website only. More details should be collected from the office at working hours

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Recent and relevant Certificates and details shall be furnished & Contractor Conditional tenders are not accepted

Third party consultants may be engaged for checking quality and quantity of work and to prevent any misuse. Proper reporting methods, through these agencies and their comments to be reviewed / addressed immediately at District level. Quality of work is of most importance.

All other conditions as per the bid document.

owning/hired at least 50% of the required or specified key and critical equipment for this work as per bid document

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) as per bid document

Work Done Certificate

Capabilities of Vendor

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. 208.12 Lakhs (50% of estimated cost of tender)

Work Done Certificate

owning/hired at least 50% of the required or specified key and critical equipment for this work as per bid document

Others -- critical equipments

Liquid assets and /or availability of credit facilities of no less than Rs. 114.00 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.3 L

Important Dates

Last Activity

1 Jun 2026

Published

22 May 2026

Bid Opening

2 Jun 2026

Download Ends

30 May 2026

Pre-Bid Meeting

25 May 2026

BOQ Preview

•

Construction of New Impounding Reservoir at Government Land Survey No. 115 of Turukanadona village for Drinking water for Turukanadona and Hirapur villages in Raichur taluk of Raichur District

•

Construction of New Impounding Reservoir at Government Land Survey No. 115 of Turukanadona village for Drinking water for Turukanadona and Hirapur villages in Raichur taluk of Raichur District : CONST...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in Cement Concrete for all Basement & surface levelworks, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

•

Supplying and fixing 450 mm dia DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot etc., complete a...

•

Providing, Laying and Jointing 450 mm dia Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating EACH deposited layer by r...

•

Design, fabrication, supply, erection, testing and commissioning of radial gate consisting of skin plate, stiffeners, horizontal girders, sector ams, trunnion assemblies, tie beam, pulley supports, br...

•

CONSTRUCTION OF IMPOUNDING RESERVOIR :- Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as direct...

•

Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations ...

•

Earth work in surface excavation by mechanical means for lowering & levelingthe ground for all works other than foundation in all kinds of soils & upto depthnot exceeding 300mm as per drawing and tech...

•

Providing hearting embankment using selected impervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials,machinery, labour,all other opera...

•

Providing casing embankment using semi-pervious / pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations ...

•

Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...

•

Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...

•

Providing and fixing LDPE sheet for bed and sides of canal including cost of all materials, labour, laying and joining as per specifications and all other ancillary operations complete. Using 1000 mic...

•

Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery,labour including pre...

•

INLET AND OUTLET FOR IMPOUNDING RESERVOIR :-Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels,keytrenches,foundation of Buildings & bridges and such similla...

•

BARBED WIRE FENCING TO IMPOUNDING RESERVOIR & WTP :-Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels,keytrenches,foundation of Buildings & bridges and su...

•

Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT ste...

•

Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and en...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

FLOTING FLAT FORM FOR SUBMERCIBLE PUMPING MACHINERY :- Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,...

•

Polyethylene water storage tank with cover and suitable locking arrangement Providing and fixing plastic Sintex tank of size 0.60 x 0.60 x 0.495mfor floting flat form as per the design and drawing a...

•

Providing and fixing 12 X 12 Guage GI Wire rope and required dia with manuvally operated wheel pully etc., complete as per specification, design and drawings including cost of all material, labour c...

•

PUMPING MACHINERY FOR FLOATING DECK TO SMFT :- Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x10...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 80 mm etc., complete as per specification, design...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 80 mm etc., complete as per specification, design and drawings inc...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 80 mm etc., complete as per specification, design and drawi...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

•

Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

WTP 30000 LPH :- Design parameter- Supply installation and commissioning of the water treatment plant capable to treat the water and make it potable at the flow rate of 30000 LPH with suspended solids...

•

CIVIL WORK FOR LAMELLA CLRIFIER :-Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, keytrenches, foundation of Buildings & bridges and such simillar works...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

CONSTRUCTION PWS /PUMP HOUSE / CHLORINATION ROOM :- Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, keytrenches, foundation of Buildings & bridges and...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridgesupto3.50mheight.Thegranite/trap/basa...

•

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

•

Providing, Laying and Jointing 200 mm dia Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing material...

•

Supplying and fixing 200 mm dia DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot etc., complete a...

•

Providing and fixing 200 mm dia PN-10 DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grad...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screw...

•

Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...

•

PURE WATER PUMPING MACHINERY PWS @ WTP TOTURKANDONA VILLAGE OHT :- Providing and fixing 80 mm dia PN-10 DI Resilient seated soft sealing SLUICE VALVE with body bonnet of Ductile Iron (DI) conformi...

•

Providing and fixing 100 mm dia PN-10 DI Resilient seated soft sealing SLUICE VALVE with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaf...

•

Providing and supplying 20 mm dia - PN -1 Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspectio...

•

Providing and supplying 40 mm dia - PN -1 Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspectio...

•

Providing S&S 300 mm dia RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying ...

•

Supplying, laying and jointing 90 MM DIA PE-100- PN-8 HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at...

•

Providing and installation of Class SN8 90 mm ELECTRO FUSION COUPLER Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 ...

•

Providing and installation of Class SN8 140 mm ELECTRO FUSION COUPLER Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2...

•

Providing, Laying and Fixing of 80 mm dia Medium class GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads where...

•

Providing wrought mild steel (galvanized) 80 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. etc., complete as per specification, design and drawings including cost of ...

•

BULK FLOW METER :-Supply and fixing of Horizontal Mechanical Woltman type hemetically sealed 80 mm dis water meters with copper Glass register with IP 68 protection. The meter shall be removable mecha...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mmtrench width, as per drawing and technical specifications, including settingout,shoring,strutting,barricading, caution lights, rem...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting EACH deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Cutting in Asphalt Road Surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps including barri...

•

Cutting in Cement Concrete Road Surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includi...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Tack coat on Cement concrete pavement Providing and applying tack coat with RS-1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.30 kg/m2 on Cement Concrete pavement. etc., co...

•

Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG- 30 bitumen to req...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

CONSTRUCTION OF VALVE CHAMBER 5 Nos :- Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels,keytrenches,foundation of Buildings & bridges and such simillar wor...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

CONSTRUCTION OF THRUST BLOCK :- Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels,keytrenches,foundation of Buildings & bridges and such simillar works in a...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

NALA CROSSONG :- Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels,keytrenches,foundation of Buildings & bridges and such simillar works in all kinds of soi...

•

PUMPING MACHINERY AT PURE WATER SUMP :- Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments HEAD :85 M...

•

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments HEAD :85 M and DISCHARGE : 1016 LPM etc., complete ...

•

Submersible Cables: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest...

•

Pressure Gauge: Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 80 mm etc., complete as per speci...

•

Gate Valve: Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 80 mm etc., complete as per specification, design and ...

•

Non Return Valve: Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 80 mm etc., complete as per specification,...

•

Galvanized Mild Steel tubes: Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end ...

•

Power Capacitor: Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

•

L.T Cable : Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessa...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-4 TURKANDONA 10049 R1.doc

Tender Document • 1.00 MB

loc formate.pdf

Instructions to Tenderers • 0.95 MB

Notification 18-5-26 Turakanadona IR.pdf

Instructions to Tenderers • 2.41 MB

Ready to Participate?

Download all tender documents and submit your bid