SPECIAL REPAIRS TO SQUASH COURT AT EME BARODA

Amount

Taking down cement plaster on wall of any description incl scrubbing down with water complete.

Dismantling boarding, any description, fixed in any position with nails complete

Taking down door chowkats or frame with shutter incl glass (without taking off shutter from the frame) exc 1.5 Sq m & removing from site complete

Dismantling framed timber scantling under 40 sq cm in any position, in fillets, rafters, purlins etc complete

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots & necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete.

M&L for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws complete

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete

S&F 150 mm size extruded aluminium alloy handles, febricated type anodised complete

S&F 300 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters complete

S&F Aluminium (extruded section ) body Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters 851mm to 1000mm in width and of weight between61 kg to 80 kg and fixed complete

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete

M&L preparation of new steel surfaces any description n exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete

M&L for anodised aluminium snap grid frame work for false ceiling and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete.

M&L for 18/19 mm thick particle board/ tiles in ceilling for insula-tion purposes, fixed with nails to timber framework or with staples on snap grid complete

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete

M&L for 15 mm thick rendering in on fair faces of bk / concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete.

M&L for applying two coats of plastic emulsion paint over a primer on newly plastered wall surfaces complete

Taking out old serviceable toughened glass, fixed vertically, from old wooden floor and metal frames, or stone, concrete or brick surrounds, any thickness or size; removing beads etc and stacking at site for reuse and refixing the same after laying of wooden flooring including all existing fixtures and fittings like patch hinges, hydroulic floor door closer etc and all material required for erecting glass, making good breakages in taking out and handling etc. complete.

Supply and Installation of Maple/Teak wood sport flooring 21mm thick, 53 to 92 mm wide and required length including P.U. Polishing water based Polyurethane Lacquer in tongue and groove shape, edges of the boards jointed with finger lock groove and bottom side with air pass groove, laid over and jointed with screws to Pine wood runners of 70mm X 45mm size, treated with anti-termite solution and fixed on bottom side with 19/10 mm thick EPDM air Cushioned pads 350mm in one direction all as per World Squash Federation (WSF) complete.

Supply and Application of 3 mm to 4 mm resian modified with glass fiber mesh hard plaster system all as per WSF(World Squash Federation) Specification complete.

Supply and Installation of Squash Court Sound Board System of 2.1m X 0.43m and 22 mm gauge including fittings all as per WSF (World Squash Federation) Specification complete.

Supply and Application of Washable Paint as per manufactures instructions complete.

Supply & Application of Game line marking of Red colour PU paint on wall surface and oil based paint on Wooden Flooring all as per WSF Specification complete.

Taking down UNSV copper/aluminium point wiring including fixture/ fittings and M&L concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694, ISI marked drawn in & including PVC conduit 25 mm dia with accessories concealed in wall/roof/ceiling etc and including sunken pressed steel terminal boxes for modular in wall but including modular white cover with frame including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed FRLS cable as earth wire to common earth and connected to earth dolly drawn in same conduit for One light / fan / bell point controlled by one switch 6 amp one waycomplete.

All as described above but for One 3 pin switch socket combination 6 amp on the independent board.

All as described above but for One 3 pin switch & socket on same board with other switches.

All as described above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S&F in replacement MCBs DB SPN 8 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete.

S&F in replacement MCBs SPN 5 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete. (DB will be measured and paid separately under respective items of sch A):-

All as described above but MCB SP 5 to 40 Amps

M&L in replacement Cast iron /pressed steel terminal boxes60 mm deep for mounting switch ,socket, fan regulater etc with 3 mm thick plastic laminated sheet coverof size 75x75 mm rectangular complete

M&L in replacement Cast iron /pressed steel terminal boxes60 mm deep for mounting switch ,socket, fan regulater etc with 3 mm thick plastic laminated sheet coverof size 150x75 mm rectangular complete

M&L Switch& socket, 6A-2/3 pin combined complete.

M&L modular socket combination 16 Amps, 6 pin, 3 module complete.

Supply, fixing, testing and commissioning Light source LED, Power consumption not more than 36W, Voltage 220-240V AC 50 Hz and Similar to Havells Make VENUSNEOHE2X2 PLR36WLED 8XXS complete.

S&F ceiling rose 65x17mm three terminals complete.

M&L switch piano flush type single pole, two way 6amp complete .

Taking down old fitting and Supply, Fixing, Testing and commissioning of 4' LED fitting not less than 1X18W LED Batten with LED tube rod not less than 18 watt and Similar to Batten cat Part No.REGALBATTEN8UPTO1X22wSSBSWH and LED tube light cat part No.CRYSTAL1213T8DSTL 18WLED865SGLASS of Havells complete.

Taking down old fan and S&F Wall mounted fan 400 mm sweep including fixing and connection with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan and similar to Model WM Hiflo Wave of Crompton Greaves complete. Note : Old fan shall be deposited to AGE E/M store yard through RV.

S&F in replacement wall security light LED type complete with GI bend 1.2 mtr and fixing on wall / pole with clamp, nut & bolt and similar to Havells, Model ENDURA CITYLITE PLAT SL 20W LED 757SASYBOPC complete.

M&L in repairs earthing with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 5 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipw,15mm dia,medium grade,7.5 mtr long for protection of earth lead upto test point etc complete.

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil complete.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil complete

M&L for sand cushoning, to cable with river sand and punning to provide required cover for UG cables all as directed complete.

M&L brick protection cover to electric cable with class 'B' bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm complete.

Supply and laying or fixing or passing through pipe, XLPE insulated armoured heavy duty electric cable with aluminium conducto1100 volts grade cross sectional area 50 sq. mm 3.5 Core complete.

M&L for galvanized steel tubing light Grade of 40 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete.

City Light