Construction Of New Health Centre At T.P S. NO. 47 (Bhestan), F.P. No.36, Golden Aawas In Sub Zone-04, South Zone-A (Udhana), Surat.

Name of work : Construction of Health Center at T.P. 47, F.P. 36, Sub zone-4, South zone-A

DESCRIPTION QUANTITY UNIT

WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and

stacking off useful materials and disposing of the excavated

stuff up to 50 mt. lead and all lift, watering etc.comp. (A)

loose or soft soil

Up to 1.5 mt.Mechanised

Depth Efforts / Machinaries 571.50 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

2 2 piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

250mm dia 5.00 Rmt 326.84

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing &

3 3 filling interstics with Quarry Spalls complete for all leads

SMC SOR , ITEM NO. 22, PG. NO. 3 71.00 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

4 4 Crushed stone agg 20m.m Nominal size) &curing comp.

excl. cost of form work in :(a) foundation & Plinth

(A) Foundation 28.00 C.M. 3005.76

(C) Grade Slab 4.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement :

sand : 4 graded stone agg. 20 mm nominal size) & curing

comp. Includ. cost of form work but exclu. Cost of

5 5 reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

(C) Grade slab 37.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

6 6 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

7 7 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74

(2) Having cross sectional area more than 0.085 sq. mt .up

(3) Having cross sectional area more than 0.12 sq. mt. 18.00 C.M. 9190.79

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

(3) Having cross sectional area more than 0.12 sq. mt . 33.50 C.M. 6999.09

(SOR SMC - MIX DESIGN PG. NO-14)

DESCRIPTION QUANTITY UNIT

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

8 8 crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 5.50 C.M. 3982.62

Providing & fixing IS Mark TMT Bar FE 500d

9 9 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Upto G.L./P.L. 19703.00 Kg. 76.21

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. - Ground Floor

(SOR SMC Pg No. 2 It No. 16) 43.50 C.M. 4511.97

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 749.00 C.M. 130.39

Filling in foundation and plinth with murrum or selected

12 12 soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 218.00 C.M. 289.06

carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as

13 13 per 6131_part II concentration weight one litter give 1% 368.00 S.M. 82.89

concentration inclusive of one litter chemicals emulsions

application at the rate of 5 litter chemicals /sqmt of surface

is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

14 14 8 mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand)

apply thick cement slurry and apply roller horizontal as well

as vertical ( two times ) up to good quality and size of grain

in elevation as per directed by engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR 83.00 S.M 324.00

Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI

Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry

and free from all loose dirt, chalk, grease, fungi,algae and

15 15 flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

Priming: Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours.Application of putty is not

Minimum 4-6 hours duration is required between each coat

of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

DESCRIPTION QUANTITY UNIT

TOTAL COST UP TO PLINTH

DESCRIPTION QUANTITY UNIT

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

7 16 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12587.74

First Floor 0.00 C.M. 12627.34

Terrace Floor 0.00 C.M. 12666.94

(2) Having cross sectional area more than 0.085 sq. mt .up

Ground Floor 0.00 C.M. 11136.62

First Floor 0.00 C.M. 11176.22

Terrace Floor 0.00 C.M. 11215.82

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 23.00 C.M. 9190.79

First Floor 23.00 C.M. 9230.39

Terrace Floor 14.00 C.M. 9269.99

Stair Cabin 4.00 C.M. 9309.59

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8994.86

First Floor 0.00 C.M. 9034.46

Terrace Floor 0.00 C.M. 9074.06

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

Ground Floor 3.00 C.M. 8075.85

First Floor 3.00 C.M. 8115.45

Terrace Floor 2.50 C.M. 8155.05

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 24.50 C.M. 6999.09

First Floor 24.50 C.M. 7038.69

Terrace Floor 0.00 C.M. 7078.29

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7887.74

First Floor 0.00 C.M. 7927.34

Terrace Floor 0.00 C.M. 7966.94

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 13.50 C.M. 7306.10

First Floor 13.50 C.M. 7345.70

Terrace Floor 0.00 C.M. 7385.30

(3) Having more than 13 cm. Thickness

Ground Floor 40.50 C.M. 6727.93

First Floor 40.50 C.M. 6767.53

Terrace Floor 12.00 C.M. 6807.13

(SOR SMC - MIX DESIGN PG. NO-14)

DESCRIPTION QUANTITY UNIT

Ground Floor 2.50 C.M. 9419.25

First Floor 1.50 C.M. 9458.85

Terrace Floor 0.50 C.M. 9498.45

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 4.50 C.M. 6913.25

First Floor 2.50 C.M. 6952.85

Terrace Floor 1.50 C.M. 6992.45

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

8 17 crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 8.50 C.M. 3982.62

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

6 18 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 7.00 C.M. 7158.83

First Floor 7.00 C.M. 7198.43

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 3.00 C.M. 9030.72

First Floor 3.00 C.M. 9070.32

Terrace Floor 3.00 C.M. 9109.92

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & fixing IS Mark TMT Bar FE 500d

9 19 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Ground Floor 18895.00 Kg 76.21

First Floor 18540.00 Kg 77.21

Terrace Floor 6675.00 Kg 78.21

Stair Cabin Top 128.00 Kg 79.21

(SOR SMC Pg No. 2 It No. 15)

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 59.00 C.M. 4511.97

First Floor 46.00 C.M. 4786.95

Terrace Floor 35.50 C.M. 5061.92

Stair Cabin Top 13.00 C.M. 5379.24

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

16 21 Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 320.00 S.M. 678.86

First Floor 345.00 S.M. 685.11

Terrace Floor 0.00 S.M. 691.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

17 22 & finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 1174.00 S.M 189.79

First Floor 1129.00 S.M 217.93

Terrace Floor 236.00 S.M 246.07

LMR Floor 67.00 S.M 274.20

(B) for ceilings and soffits of stairs

DESCRIPTION QUANTITY UNIT

Ground Floor 356.00 S.M 214.60

First Floor 312.00 S.M 242.74

Terrace Floor 80.00 S.M 270.88

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC) at junction of brick work

and RCC work or two dissimilar surfaces, at all heights

fixed by nails, rowal plugs or tag by cement mortar 1:3

before applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 77.00 S.M. 102.00

First floor 73.00 S.M. 102.00

Terrace Floor 20.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

19 24 8 mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand)

apply thick cement slurry and apply roller horizontal as well

as vertical ( two times ) up to good quality and size of grain

in elevation as per directed by engineer incharge.

Ground Floor 419.00 S.M 324.00

First Floor 324.00 S.M 324.00

Terrace Floor 211.00 S.M 324.00

LMR Floor 34.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to

20 25 R.C.C. chajja etc.comp.. For all floor

Ground Floor 84.50 R.M 41.66

First Floor 39.50 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

Ground Floor 156.00 R.M 50.00

First Floor 156.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

22 27 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement.

Ground Floor 265.00 S.M 1040.35

First Floor 260.00 S.M 1040.35

Terrace Floor 42.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

Ground Floor 501.00 S.M 1081.71

First Floor 563.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

DESCRIPTION QUANTITY UNIT

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make

in flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

24 29 sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

comp.Size 24" x 24" For Antiskid tiles

Ground Floor 26.50 S.M 1397.83

First Floor 22.50 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

25 30 sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

Ground Floor 0.00 S.M 989.45

First Floor 0.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-cement : 3-coarse sand) and

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

Ground Floor 0.00 S.M 1076.94

First Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone

platform 0.6 mt. wide & 0.75 mt. height, including one end

side granite stone (Double Polish) of 1.25 mt. height &

front granite stone patti of 10 cm wide, vertical partitions of

half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 9.35 R.M. 3128.00

First Floor 2.35 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At

all floor levels, after completing plumbing work of pans,

28 33 pipes,traps etc.with cinder or fly ash as directed by

Engineer in charge etc. comp.For all Floors.

All Floor 15.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

Providing & fixing 35mm.th. Indian teak wood shutters

for doors, windows &clearstory windows incl. Indian teak

wood frames of finished size 12cm x7cm.incl. anodized

aluminum fixtures & fastenings incl. Primer coat of

approved quality & two coats of oil painting etc. For all

Floor (A) Fully Panelled

All Floor 0.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

DESCRIPTION QUANTITY UNIT

Providing and fixing FRP frame size 125x65 mm and

mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides

& edges in Gel coat finish. The core of the shutter & frame

is to filed up with injected polyurethane foam done in situ

30 35 along with embedded wooden pieces for stiffening & also 26.00 S.M 2019.98

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S. hinges

with fastener sleeve & alluminium fixtures & fasteningsFor

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double

Core type Both Face water proof Ply Vennered &

mm th.laminate shall be pasted on both side with adhesives

as specified by the manufacturers. The laminate shall be as

per approved shade & texture, of make incl. Sal wood

frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings

For all Floor 0.00 S.M

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 79.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded

aluminium colour anodized section frame main outer size

63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm

x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt.

0.695 Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size

mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt.

of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm

thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. complete for window.For all Floors. 0.00 S.M

(A) Same as above but colour anodized 9.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing and fixing window having extruded

aluminium colour anodized section frame main outer size

95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @

Wt. of 0.738 Kg/mt), horizontal Three track member size

92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

mm x 1.50 mm (of jindal section no:8933, @ Wt.

33 38 Kg/mt) with sliding shutters of horizontal member size 40 0.00 S.M

mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt.

of 0.456 kg/mt), vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt)

with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per

(A) Same as above but colour anodized

All Floor 57.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

DESCRIPTION QUANTITY UNIT

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x1.2mm , @ Wt.

Kg/mt with colour Powder Coated alluminium frame for

34 39 ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

A) Same as above but Colour anodized 8.50 S.M 2414.00

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17

Providing & laying granite slab 18 mm thick in Window-

Door seal,Frames Etc laid on 10 mm thick cement mortar

1:4 (1 Cement: 4 Coarse sand) with necessary adhesive

material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp. (Basic Rate:

Rs. 1000.00/S.M.).For all Floors.

For all Floors. 145.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

Labour Charges For Edge Finished For Granite for all

For all Floors. 958.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing Powder Coated Aluminium partly glazed

and partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick

clear float glass of approved make including all other necessary

37 42 fittings and fixtures. Entire work will have to be made water proof

using necessary rubber sectioned wherever required. Gaps all

round the frame to be filled with approved water proof sealent.

Bottom portion of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as

(A) Same as above but Colour anodized

For all Floors. 71.00 S.M 2400.00

SMC SOR Alluminium Work ITEM NO.7(A),Pg No.17

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x

mm having weight 1.158 kg. / R.M. shutter section having size

83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle

1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

38 43 vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing

Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm

thick sheet glass in acid frogting and 12 mm thick prelaminated

sheet of Greenlam, Panama or archid make as approved by

Engineer-in-charge including fixing brass pivot, handle, lock etc.

(A) Same as above but Colour anodized

For all Floors. 11.00 S.M 3237.00

SMC SOR Alluminium Work ITEM NO.6(A),Pg No.17

Providing & fixing M.S.Grills of required pattern to

wooden frames of windows etc. At all floor levels with

M.S. flats at required spacing & frame around

39 44 square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of

Red lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 1480.00 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

DESCRIPTION QUANTITY UNIT

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

40 45 burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters. (A) For

plain grill For all Floor

For all Floors 74.00 S.M 65.31

SMC SOR, colour works,item no.-8,Pg No.15

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners

41 46 stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as

per approval of Engineer-incharge, (for payment purpose

weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners

SMC SOR, ITEM NO 120,Pg No.11, MR 645.00 Kg. 450.00

(1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

42 47 prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water proof test

as directed. (M.R.)

B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and

grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the

vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing etc. Comp. With average thickness of 120 mm

and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test. All above operations to be down in order and

as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 410.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

DESCRIPTION QUANTITY UNIT

(A) Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th'

in the floor of the depression & about 18mm th' On the side

walls of the depression up to the floor level, water

proofing plaster about 18 mm. th' be continued on the walls

above the floor level for a height of 600 mm. with surface

suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm

nominal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

For all Floors 72.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glased

tiles of to be laid over cementr morter 1:3 to plain or slope

43 48 and to be tempered to bring morter crème out up to surface

using white cement including grounding off jnctions and

extending them up to 15 cm along the wall, clearing with

water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 410.00 S.M 747.29

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to

44 49 give an even shade including thoroughly brushing the

surface free from mortar dropping and other matter and

sand papered smooth.

(A) for wall and similar surfaces

For all Floors 2606.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 748.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

45 50 surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 2606.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 748.00 S.M 79.39

SMC SOR , coiour works,Pg No.15,item no.-5

DESCRIPTION QUANTITY UNIT

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including

applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and

free from all loose dirt, chalk, grease, fungi, algae and

flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of

putty is not recommended. Minimum 4-6 hours duration is

required between each coat of weather shield max paint.For

For all Floors 988.00 S.M 82.00

SMC SOR, coiour works,Pg No.16,item no.-17

Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

mortar 1:1.5 laid and finished with flush pointing in white

46 52 or colour cement including rubbing and polishing complete.

(Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 81.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting,

risers of steps,dedo and pillars laid on 10mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand) and finished with

flush pointing in white or colour cement including rubbing

& polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR PAGE NO 4,IT NO 40 M.R. 25.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs

curing, layig including painting the exposed portion of

loops, all as per standard design complete.

For all Floors. 40.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint

49 55 (A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers

& the like. For all Floor

For all Floors. 5.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & fixing in position collapsible steel shutters

with vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with

bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Ground Floor 19.50 S.M 5865.10

SMC SOR , PAGE NO 5, IT NO

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for Shelve joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.) (Basic Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 9.50 S.M 1050.00

DESCRIPTION QUANTITY UNIT

Providing, fixing, fitting S.S. Latter of quality SS 304 or

with colour powder coating incliuding Necessary fixture

& Fastaning with scaffolding etc. complete. As per

requirement & Direction of Engineer in Charge.

Wall Vinyl Sticker SQ.

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 SQ.

SMC SOR, PAGE NO.13,IT NO 147 (MR)

Solvent Vinyl Sticker (120 gsm) with Lamination (100 SQ.

SMC SOR, PAGE NO.13,IT NO 148 (MR)

5mm PVC sheet Eco Vinyl (Any size) SQ.

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all SQ.

waterproof materials

SMC SOR, PAGE NO.13,IT NO 150 (MR)

TOTAL COST OF SUPER

DESCRIPTION QUANTITY UNIT

WATER SUPPLY & SANITATION

Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand)

etc. Comp.(A) Vitreous china long pattern of approved

colour For all Floor

For all Floors. 0.00 Nos. 1401.60

SMC sor Page no7 It No.

Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap including jointing

the trap with soil pipe in cement mortar 1:1 (1 cement :

find sand) (seat and cover to be measured and paid for

separately) (A) Viterous china pattern - I (i) in approved

For all Floors. 14.00 Nos 1303.71

SMC sor Page no7 It No.

Providing and fixing plastic seat and cover for wash down

58 66 water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover

For all Floors. 14.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing wash basin with single hole for pillar

tap at all floor levels, with C.I. or M.S. Brackets painted

white incl. cutting holes & making good the same incl.

fittings such as pillar tap,, capstan head screw down high

pressure with screws, shanks & back nuts, C.P. Brass

waste trap, screw down stop tap 15 mm. dia. etc. complete.

(A) Vitreous china flat back wash basin 550 mm.x

mm. size in approved colour For all Floor

For all Floors. 14.00 Nos 2059.93

SMC sor Page no7 It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet

or plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

All Floor 14.00 Nos 833.73

SMC sor Page no7 , It No.72

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 14.00 Nos 1423.00

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing C.P. Brass screw down bib tap at all

63/A 70 floor levels, polished bright etc. comp.-(A) 15mm dia. For

All floor 14.00 NO 186.83

SMC sor Page no 8 It No.

Providing & Fixing chromium plated brass half turn

64 71 flush cock at all floor levels, of approved quality incl.

fixing in pipe line etc. Comp.-- 25 mm dia

All floor 14.00 NO 263.77

SMC sor Page no 8 It No.

Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long and

65 72 nuts, washer and brass flange complete, including cutting

and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare

Cat. No.: F440020 F850094, jaquar CON 053 KN

For all Floors. 14.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

DESCRIPTION QUANTITY UNIT

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua

ACN 1121N ,HindWare F880007

For all Floors. 14.00 Nos 890.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish

67 74 of approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 14.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following nominal

68 75 diameter of self cleaning design with C.I. scread down or

hinged grating including the cost of cutting and making

good the walls.

All floor 25.00 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS

no. 13592 (Type"B") of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make for soil and waste discharge system at

all floor levels incl. All fixtures like bends, tees,shoe etc.

jointed with resin of approved brand & manufacture etc.

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no.

13592 (Type "A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

70 77 Finolex make for rain water at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes

71 78 of prince, suprime, jain Or Eqivalent make etc. comp

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

72 79 thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as

per instruction given by Eng. incharge. For

75mm PVC pipe 20.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

DESCRIPTION QUANTITY UNIT

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand &

74 81 manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

SMC sor Page no8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor

level,of approved design to C.I. or S.C.I pipes including

cost of cutting holes and making good the wall etc. comp.

SMC sor- Page no8, It No. 90 MR

Providing and fixing G.I. holder "Z" clamps at all floor

76 83 level,of approved pipes including cost of cutting holes and

making good the wall etc. comp. (M.R)

(B) 75 to 90 mm Dia 8.00 NO 75.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC sor Page no8,It No.

Providing and fixing abonite ball cock of approved quality

as directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering and laying joining R.C.C. NP2

CLASS pipe in cement mortar in proportion 1:1 of

following nominal internal diameters including testing of

pipes and joints etc. complete.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting

brick masonary chamber and water tight Pre cast

R.C.C.cover of 300mm X 300mm size (inside) including

plastering smooth inside and outside 15 mm thick in C.M

1:3 etc. comp.i) square mouth traps (A)300 MM X 300 MM

Size - P type.For all Floors.

SMC sor,Page no 7, It No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside

to exposed faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame

to be not less than 38 kg. On top etc. comp. for single

pipe.'.(A) Precast RCC heavy duty Cover instead of C.I.

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

DESCRIPTION QUANTITY UNIT

Extra for every additional depth of 0.1 mt.beyond 0.45 mt.

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th'

B.B. Masonary in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top

slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size), Foundation concrete 1: 5: 10 &

fixing C.I. cover with frame to be not less than 38 kg. On

top etc. comp. Inside dimension, 455 x 610 mm &450 mm

deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt.

SMC sor - Page no8,It No.76

Providing and fixing C.I. Machinehole cover 0.60 x

83 90 mt. Size having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 4.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia

and 30 cm Length

SMC sor- Page no6 It No. 64 6.00 NO 101.91

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

85 92 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT 13261H ,HindWare BACK SMALL 60001 4.00 NO 2476.00

SMC sor- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050.00

Under Ground water Tank 20000.00 Lit 5.46

SMC sor - Page no6. It No.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor

86 95 levels, in flooring, treads of steps & landings laid on a bed

of 12 mm. Av. Th.C.M.1:3 (1cement : 3 sand) finished with

flush pointing in white cement etc.com. For all floors

Under Ground water Tank 11.50 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor

levels in skirting risers of steps & dado on 10 mm. th.

C.M.1:3 (1cement :3 sand) including necessary cement

paste for fixing and joined with white cement slurry

etc.complete. For all floors

Under Ground water Tank 26.00 SM 887.64

SMC SOR, Page no4, It No.

Providing & fixing IS Mark TMT FE 500D reinforcement

88 97 for R.C.C. work incl. bending, binding & placing in

position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 980.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace.

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

(A) Total amount up to plinth

(A) Total amount up to plinth

DESCRIPTION QUANTITY UNIT

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

GROUND DEVELOPMENT WORK

DTS DESCRIPTION QUANTITY UNIT AMOUNT

(A) Paver block & VDS Road

Box Cutting the road surface to proper slope and camber

for making base includinng removing the excavated stuff

and depositing on the road side slope as directed up to

SMC SOR-PAGE NO 20 IT NO GD.1

Preparation of subgrade with compacting, Leveling and

consolidation of subgrade with miniroller/plate vibrator

machine including watering and filling in depression occur

the process as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.2

Providing & laying Granular Sub Base(GSB) confirming

to Grading V of Table 400.0 of compacted th. Of 150 mm

with specified graded stone metal and sand mixed in place

and laid with mechanical means spreading with motor

grader and compactiong with vibratory roller having

miimum 80-100 KN static weight to achieve desired

dencity of 98 % of MDD including all material, labour,

machinery with all leads and lifts etc. comp.

SMC SOR-PAGE NO 20 IT NO GD.9

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10

93 4 graded stone agg. 40 m.m Nominal size )& curing comp. 134.00 C.M. 2517.44

incl. cost of from work in :Foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

providing and laying 200 micron plastic sheet on prepared

sub base as per instruction of Engg. In charge etc. complete.

SMC SOR-PAGE NO 20 IT NO GD.12 MR

Supplying & filling fine sand (pana) in 75 mm /100 mm /

150mm compacted thickness over the base including

95 6 necessary compaction, watering etc. compacted. Item 76.00 C.M. 413.09

includes levelling by using vibratory plates compacted

machine and as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.4

Providing 100mm th. Ready made c.c. kerb of strength M-

20 (Size 300mm X 380mm) purchased from SMC's

approved paverblock manufacturer & setting in line level

and in truly vertical postion, including filling joints in C.M.

1:1 (1 part of cement : 1 part of stone dust ) smooth

pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse

sand) including watering etc. complete and as directed by

engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.6 MR 265.00 R.MT 228.00

Providing interlocking type Rubber moulding cement

concrete Paver Block of approved shape, design & colour

having 60 mm thickness (M-35) Purchased from S.M.C's

approved paverblock manufactures only & fixing on fine

sand bedding. Item includes leveling by using vibratory

plates compacted machine. Item also includes all materials,

labour, equipments, tools, plants, watering, cleaning etc.

With colour 440.00 S.M. 524.00

Without colour 440.00 S.M. 524.00

SMC SOR-PAGE NO 20 IT NO GD.7 MR

Providing & filling with Mix soil in layers of 20 cm. Th'.

Incl. watering, ramming & consolidation etc. complete.

SMC SOR-PAGE NO 20 IT NO GD.3

Providing & filling in plinth with murrum or selected soil in

99 10 layers of 20 cm. Th'. Incl. watering, ramming & 166.00 C.M. 289.06

consolidation etc. complete.

SMC SOR-PAGE NO 1 IT NO

DESCRIPTION QUANTITY UNIT

Providing & laying cement concrete Pavement using

1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm

100 11 nominal size) & Vaccuum Dewatering technique

including floating surface with a skim powder floater,

curing etc. complete.

Internal road 27.00 C.M. 5981.00

SMC SOR-PAGE NO 20 IT NO GD.10

Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of

101 12 1/3 of total thickness with filling of epoxy sealent as 100.00 C.M. 50.00

directed by engineer in charge

SMC SOR-PAGE NO 20 IT NO GD.13

Providing and fixingTMT/CRS bar reinforcement for

102 13 R.C.C. work including binding and placing in position etc.

Upto G.L./P.L. 1080.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Total amount of Paver Block & VDS Road

Total amount of Paver Block & VDS Road

(B) Compound wall

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

for 250 mm dia 156.00 R.M 326.84

for 300 mm dia 57.00 R.M 391.74

SMC SOR-PAGE NO 9 IT NO

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

1 2 mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft

Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 35.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:4:8 (1 cement:4

103 3 coarse sand:8 gradedstone agg. 40 mm nominal size) &

curing comp. excl.cost of form work in

(A) Foundation and plinth 6.50 C.M. 2680.21

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement:2

sand:4 graded stoneagg. 20 mm nominal size)& curing

comp. Includ.cost of form work but exclu.Cost of

reinforcement for reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete

SMC SOR-PAGE NO 9 IT NO

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp.Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in :

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 15.00 C.M. 8593.80

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

SMC SOR-PAGE NO 9 IT NO

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp.Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.08 sq.mt. 9.00 C.M. 12123.79

SMC SOR-PAGE NO 9 IT NO

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone

4 7 agg. 20 mm nominal size) & curing complete including cost 8.00 C.M. 3982.62

of formwork in wall caps & copping.

SMC SOR-PAGE NO 9 IT NO

DESCRIPTION QUANTITY UNIT

(excluding rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering.

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D

9 9 reinforcement for R.C.C. workincl. bending, binding &

placing in position etc. comp.

Upto G.L./P.L. 5620.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having

crushing strengthnot less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

At ground floor 81.00 C.M. 4511.97

SMC SOR-PAGE NO 2 IT NO

Half brick masonry in common brunt clay building bricks

having crushingstrength not less than 35 Kg/Sq.Cm. in

16 11 Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

At ground floor 0.00 S.M. 625.53 -

SMC SOR-PAGE NO 2 IT NO

Providing & Applying 10mm.th.cement plaster in single

coat on brick/concrete walls similar surfaces for plastering

17 12 & finished even & smooth with afloating coat of cement

slurry mixed with admixture of lime or neeru inrequired

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 S.M. 189.79 -

(B) For ceilings & soffits

At Ground Floor 0.00 S.M. 214.60 -

SMC SOR-PAGE NO 3 IT NO

Providing and applying 20mm. thick sand faced cement

plaster on walls or similar surfaces at all floor

14 13 levels,consisting of 12mm avrerage thick backing coat of

C.M. 1:3 (1 cement :3 sand ) and 8mm thick finishing coat

of C.M. 1:1(1 cement :1sand).

At Ground Floor 784.00 S.M. 330.88

SMC SOR-PAGE NO 3 IT NO

Providing throating or plaster drip and moulding it to

R.C.C. chajja etc. comp.. For all floor

At Ground Floor 0.00 R.M. 41.66 -

SMC SOR-PAGE NO 3 IT NO

107 15 Pro. smooth plaster patta

At Ground Floor 677.00 R.M. 27.27

Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

At Ground Floor 931.00 R.M. 50.00

SMC SOR-PAGE NO 3 IT NO

DESCRIPTION QUANTITY UNIT

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including

applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and

free from all loose dirt, chalk, grease, fungi, algae and

flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required

(A) For wall 791.00 S.M 82.00

SMC SOR- COLOUR WORK PAGE NO 16 IT NO

Providing and fixing M.S. Gate of required pattern to

wooden frames of windows etc. at all floor levels with M.S.

108 18 flats at requuired spacing & frame aroundsquare or reound

bars with round headed bolts & nuts or by crews incl.

Priming coat of Red lead paint etc. comp.

Ground Floor 850.00 Kg 104.20

Providing & fixing M.S. Grills of required pattern to

wooden frames of windows etc. at all floor levels with

M.S. flats at required spacing & frame around square or

round bars with round headed bolts & round headed bolts

and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain Grill For all floors

All Floor 5130.00 KG. 104.20

SMC SOR-PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

40 20 burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

Ground Floor 199.00 S.M. 65.31

SMC SOR- COLOUR WORK PAGE NO 15 IT NO

Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

46 21 mortar 1:1.5 laid and finished with flush pointing in white 0.00 S.M. 2410.00 -

or colour cement including rubbing and polishing complete.

Total amount for Comp. Wall & Entry Gate

Total amount for Comp. Wall & Entry Gate

Demolition including stacking of serviceable materials and

110 1 disposal of unserviceable materials with all lead and lift (i) 0.00 C.M.

SMC SOR-PAGE NO 18 IT NO

Demolition of brick work and stone masonary including

111 2 stacking of serviceable materials and disposal of 0.00 C.M.

unserviceable materials with all lead and lift -

SMC SOR-PAGE NO 18 IT NO

DESCRIPTION QUANTITY UNIT

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

112 3 serviceable material and disposal of unserviceable from site 0.00 S.M.

of work with all lead and lift.

SMC SOR-PAGE NO 18 IT NO

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth as

113 4 mentioned in manufacturer's specification, cleaning the

hole with required air blower and other necessary tools and

tackles, positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-in

SMC SOR-PAGE NO 11 IT NO

Dismentalling of R.C.C work by electric breaker, rate to

114 5 include all lead, lift , scaffoulding, transportation, and 15.00 Hr. 125.00

labour etc. complete. As directed by engg. Incharge.

Total amount of Demolition

Total amount of Demolition

LAWN : Area cleaning and side grading, removing

unwanted materials, plants, chrubs,wild grass,

weeds,debris,rubbish,etc. Excavating up to depth 30 C.M

surface dressing leveling, making slopes for drainage

according to landscape, Disposal of unwanted materials

with all labour and tools. Development of lawn including

preparation of bed ground, spreading and mixing the good

soil with Farm Yard Manure, Gypsum, fertilizer soil with

farm Yard Manure, Gypsum, Fertilizer bas required hand

specified. Planting of lawn grass bits roots of approved

quality, watering and specified. Planting of lawn grass bits

roots of approved quality, watering, and specified. Planting

of lawn grass watering mowing, weeding etc. maintenance

of developed lawn for a period of 6 months.

Supplying on site plants with following specifications .

Plants would be in good condition and of specified height.

The rates would be inclusive of all taxes, sales tax,

116 2 Octroi,transportaion etc. complete F.O.R. site. Conditions

of plant would be verified at the time of selction as well

delivery. All complete and as per instructions of the

Engineer-in-charge.

Lagerstroemia thorell II - 3.66m ht 15.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 15.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 15.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. 15.00 Nos. 75.00

Nephrolepis exalotta smithi - 0.45x0.30m 10.00 Nos. 20.00

Champa - 3.66m ht. 15.00 Nos. 270.00

Total amount of garden

Total amount of garden

DESCRIPTION QUANTITY UNIT

(E) Water Supply & Sanitary

Providing and constructing simple chamber of 23cm. of

B.B. masonary wall in c.m. 1:5 incl. 15mm. thick cement

plaster in c.m 1:3 inside and out side to exposed faces

117 1 R.C.C. top slab with1:2:4 mix (1 cement : 2 sand : 4 grade 20.00 No 2932.93

ston aggregate 20mm size), foundation concrete 1:5:10 with

fixing Precast RCC. heavy duty cover on top etc. inside

dimension 455 x 610mm & 450mm deep for single pipe

SMC SOR-PAGE NO 7 IT NO

Providing, Lowering & laying joining R.C.C NP2 CLASS

118 2 pipe in C.M 1:1 of following nominal internal diameters

incl. Testing of pipes and joints etc. Comp

SMC SOR-PAGE NO 7 IT NO

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc.

119 3 comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing C.P brass screw down bib tap at all

floor level polished bright etc. comp.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC SOR-PAGE NO 8 IT NO

Total amount of Plumbing & Sanitation

Total amount of Plumbing & Sanitation

TOTAL OF GROUND DEVELOPMENT

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & fixing L- type table (Size:- 1.650m x 1.900m x

0.750m) with table top would be 38mm thick, made out

18mm Commercial Plywood. All outer surfaces to be

finished using 1mm thick laminate and bottom surface to be

finished with 1mm thick laminate as approved by

architect.The vertical support of table would be 18mm thick

Commercial Plywood. The surface would be finished using

1mm thick laminate as approved by architect. Front of the

table is made using 18mm thick Commercial Plywood.

Work Table Top Borded and edged should be made valsadi

teak wood borders with french polish. It should have 2 nos.

121 1 of drawer units made out of 12mm thick Commercial 5.00 Nos 34,015.00

Plywood on all side &12 mm thick Commercial Plywood at

bottom. It should have 2 shutters made out 18mm thick

Commercial Plywood. All Exterior surfaces of the table

would be finished in 1mm thick laminate & all internal

surfaces would be finished with 1mm thick laminate as

approved by architect. including all necessary hardware &

fittings like screw, lock, drawer channel, handle, key board

tray, cable manager, magnet, chain, foot rest etc. completed

as per architect drawing & Instructed By Site Engineer.

Commercial Plywood Make- (Echotech, Century, Green),

Laminate Make- (Century, Green, Royal Touch). (Basic

As PerOuter Laminate-1600

Interior Rs/sqft Centre

Work for Health & InnerDTP

DESCRIPTION QUANTITY UNIT

Providing & Fixing table (Size:- 1.200m x 0.600m x

0.750mm) with 38mm thick Commercial Plywood with

1.0mm thick lamination sheet fitting with valsadi teak

woood. Vertical support should be made by Commercial

Plywood & make 1 nos. drawers on one side. All Exterior

surfaces of the drawer would be finished in 1mm thick

laminate & all internal surfaces would be finished with

1mm thick laminate as approved by architect including

lock, drawer channel, handle, keyboard trey, cable

122 2 manager, Space for CPU with french polish labour work 9.00 Nos 17,774.00

with nescessary hardware etc. completed as per site

incharge instruction and as per details drawing.

Commercial Plywood Make- (Echotech, Century, Green),

Laminate Make- (Century, Green, Royal Touch). (Basic

rate:- Outer Laminate-1600 Rs/sqft & Inner Laminate-560

Rs/sqft) (DWG No. ID/02)

As Per Interior Work for Health Centre DTP Scheme

Storage Unit made out 18mm commercial plywood, 20mm

thick shutters made with 18 mm thick commercail plywood,

back side surface of the unit is to be made with 18mm thick

commercial ply the outer surfaces would be finished using

1mm thick laminate and all internal surfaces would be

finished using 1mm thick laminate as approved by

architect. Work Table Top Borded and edged should be

made valsadi teak wood borders with french polish. Storage

unit as per measurement from shutter side, including all

necessary premium quality hardware & fittings like screw,

123 3 buffer, lock, handle, stopper, magnet, chain etc. completed 5.00 SM 14436.00

as per architect’s drawing & Instructed By Site Engineer

(size:- 0.900m x 0.450m x 0.750m) Commercial Plywood

Make- (Echotech, Century, Green), Laminate Make-

(Century, Green, Royal Touch). (Mode of Measurement:

For Measurement, Height of Storage * Length of Storage

will be Calculated) (Basic rate:- Outer Laminate-1600

Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/03)

As Per Interior Work for Health Centre DTP Scheme

Providing & fixing cupboard made out of 18mm

commercial plywood, the upper surface would be finished

using 1mm thick laminate and bottom surface would be

finished using 1mm thick laminate as approved by

architect. Borded and edged should be made valsadi teak

wood borders with french polish.The vertical & horizontal

shelves are to be made with 18mm thick commercial

plywood. The surface would be finished using 1mm thick

laminate as approved by architect, 26mm thick cupboard

shutters are made using 18 mm thick commercial plywood

openable shutter with good quality handles including all

124 4 necessary premium quality hardware & fittings like screw, 22.00 SM 11,917.00

buffer, hinges, handles, channels, stoppers, chains, bonding

material etc. as per architect’s drawing & Instructed By Site

Engineer. (size: 2.100m x 0.900m x 0.450m) Commercial

Plywood Make- (Echotech, Century, Green), Laminate

Make- (Century, Green, Royal Touch). (Mode of

Measurement: For Measurement, Height of Storage *

Length of Storage will be Calculated) (Basic rate:- Outer

Laminate-1600 Rs/sqft & Inner Laminate-560 Rs/sqft)

(DWG No. ID/04)

As Per Interior Work for Health Centre DTP Scheme

DESCRIPTION QUANTITY UNIT

Check up bed with storage & footrest 38mm thick, made

out 18mm Commercial Plywood, central partition of 18mm.

20mm thick shutters made with 18 mm thick, back side

surface of the unit is to be made with 12 mm thick , the

outer surfaces would be finished using 1mm thick laminate

and all internal surfaces would be finished using 1mm thick

laminate as approved by architect. Top Borded and edged

should be made valsadi teak wood borders with french

polish. Storage unit as per measurement from drawer and

shutter side, including all necessary premium quality

125 5 hardware & fittings like screw,bonding material, lock, 7.00 Nos 33,198.00

drawer channel, handle,magnets, chain etc. completed as

per architect’s drawing & Instructed By Site Engineer.

(size: 1.800m x 0.750m x 0.750m.) Commercial Plywood

Make- (Echotech, Century, Green), Laminate Make-

(Century, Green, Royal Touch). (Basic rate:- Outer

Laminate-1600 Rs/sqft & Inner Laminate-560 Rs/sqft)

(DWG No. ID/05)

As Per Interior Work for Health Centre DTP Scheme

Providing & Fixing lab/vaccine table (Size:- 1.800m x

0.800m x 0.750mm) with 38mm thick Commercial

Plywood with 1.0mm thick lamination sheet fitting with

valsadi teak wood beading. Vertical support should be

made by Commercial Plywood & make 4 nos. drawers &

nos shutter with french polish labour work with nescessary

hardware & fitting lock, handle, channel set, magnet, chain,

126 6 foot rest etc. completed as per site incharge instruction and 2.00 Nos 33,554.00

as per details drawing. Commercial Plywood Make-

(Echotech, Century, Green), Laminate Make- (Century,

Green, Royal Touch). (Basic rate:- Outer Laminate-1600

Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/06)

As Per Interior Work for Health Centre DTP Scheme

GANG CHAIR - 3 SEATER: Providing and fixing 3-

seater gang sitter with moulded foam, with Aluminium

casting and metal waterfall seats, PU 10mm thick pads on

seat & back (chargeable), P.C. frame & with perforation. as

per architects selection,and complete the work satisfactorily

as per instruction of architect or Engineer-in

charge.BRANDS : COHUMAN , FEATERLITE

Ref Rate from Valak Health Centre, East Zone-B

Prov. & Fixing Laminated Door of Marble / wall

storage shutter with 3"x1.5" teakwood frame using with

18mm th. commercial plywood, 1mm th. laminate,

128 8 teakwood edge biding, ss handles, hinges, magnate, 12.00 SM 5000.00

lock & necessary hardware, serews materials etc.

complete as per instruction by engineer in charge.

(DWG No. ID/08)

Ref Rate From Renovation & Repairing of Furniture

Works in various Properties of Surat Municipal

Corporation in West Zone (Rander).(ITEM RATE

Prov. & Fix wooden Notice board with Righting

laminate board finish using 12mm th. Back

commercial plywood aprooved make, 01mm th. SF

129 9 finish laminate, teakwood framing & necessary 24.00 SM 1850.00

hardware materials etc. inside and liping french polish

finish complete in all respects by engineer in charge

Ref Rate From Renovation & Repairing of Furniture

Works in various Properties of Surat Municipal

Corporation in West Zone (Rander).(ITEM RATE

DESCRIPTION QUANTITY UNIT

Providing, Making & Fixing Table of Size Required Size

using 40mm MS pipe frame structure. All M.S frame

structure should be powder coated. The table top would be

38mm thick, made out 18mm commercial plywood. Work

Table Top Borded and edged should be made valsadi teak

wood borders with french polish. All outer surface to be

finished using 1mm thick laminate & bottom surface to be

finished with 1mm thick as approved by architect including

with necessary hardware like screw, khilli, Pop up box,

table stud etc. completed as per site in charge instruction

and as per details drawing. Commercial Plywood Make-

(Echotech, Century, Green), Laminate Make- (Century,

Green, Royal Touch) (Size:- 2.000m x 0.900m x 0.750m)

(Basic rate:- Laminate-1600 Rs/sqft) (DWG No. ID/10.2)

As Per Interior Work for Health Centre DTP Scheme

Providing, Making & Fixing Table of Size Required Size

using 40mm MS pipe frame structure. All M.S frame

structure should be powder coated. The table top would be

38mm thick, made out 18mm commercial plywood. Work

Table Top Borded and edged should be made valsadi teak

wood borders with french polish. All outer surface to be

finished using 1mm thick laminate & bottom surface to be

finished with 1mm thick as approved by architect including

with necessary hardware like screw, khilli, pop up box,

table stud etc. completed as per site in charge instruction

and as per details drawing. Commercial Plywood Make-

(Echotech, Century, Green), Laminate Make- (Century,

Green, Royal Touch) (Size:- 1.400m x 0.900m x 0.750m)

(Basic rate:- Laminate-1600 Rs/sqft) (DWG No. ID/10.1)

As Per Interior Work for Health Centre DTP Scheme

Providing and fixing of approved quality Roller blinds

using phifer fabric of premium grade, with roller tube,

bottom bar leveller made of extruded aluminium alloy an

Idler, Insert Type- Brackets, PVC chain etc. all complete at

all floor and heights as per approved specification. Roller

Tube Control, Clutch, Idler Side by side or single Roller

Tube of extruded Aluminium 38mm inner dia - 41mm

outer dia minimum wall thickness of 1.6mm. Roller blind -

roller blind fabric should be made up of 35% FibreGlass,

65% PVC, it should have specific low emissivity treatment

and lead free with Greenguard gold certification. It should

have 3% to 5% openness, fabric thickness should be

mm, mesh weight approx 400 gms/ sqmtr. It should cut UV

rays, with antimicrobial properties preferably with

Microban. The fabirc should be Flame retardant and Lead

Free. It should be GreenGuard certified with Gold Standard

for low chemical emissions for indoor use. (Basic rate of

Roller blinds- 85 rs/sq.ft.)including all accessories,

material, labour,installation etc..and complete the work

satisfactorily as per instruction of architect or Engineer-in

Ref Rate from Valak Health Centre, East Zone-B

Providing and fixing Hospital Curtain of 8'-0" height with

1ft Mesh Curtain at Top with necessary Brackets, Curtain

Track with Accessories complete. Curtain to be as per

approved sample. All the work complete as per the detailed

drawing, Make up sample and instruction of Architect/ EIC.

Fabric should be Water Repellant, Antifungal/ Antibacterial

and Fire Retardant. Curtain Track should be bendable, good

quality runner for smooth movement of curtains.

Suspension Bracket should be made of powder coated

Aluminium Profile and installed as per site height (incl.

Suspending Rods) specifications and finished and complete

the work satisfactorily as per instruction of architect or

Engineer-in charge And as per "Architecture" detail,

As per Approved Rates of New ED-1 (Hospital Block) of

DESCRIPTION QUANTITY UNIT

Acoustical Panel Finish: Providing and fitting of acoustic

panels with Standard size & thickness of 1220*2420*9mm

of brand Artois, Smart Pannel, Senses Akustik only in

Gradient Pattern. Panels should have Sound Absorption

coefficient (NRC) 0.84. Formaldehyde emission standards

of GB18580-2001 class E1, it should be a green material

with asbestos-free, non-toxic and tasteless gas under

extreme temperature, protecting the ozone layer, non-

134 14 irritant and recyclable. acoustic panels have to be Fire- 80.00 SM 2921.36

resistant as per China standard class B1. Good insulation

properties, to prevent transmitting the heat from outdoor to

indoor directly as partition or and ceiling, saving 35% of

energy, extending the life of air conditioning.including all

acceessories, material, labour etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge And as per " Architecture" detail.

As per Approved Rates of New ED-1 (Hospital Block) of

Plain Gypsum Sheet Ceiling: Providing and fixing of

Plain Gypsum Sheet Ceiling using 80 mm. x 26 mm. x

mm. thick g. i. Ceiling Sections, 15 mm. x 45 mm. x

mm. x 0.90 mm. thick Intermediate Channels, 20 mm. x

mm. x 30 mm. x 0.50 mm. thick Perimeter Channels and

mm. x 10 mm. x 0.50 mm thick Ceiling Angles, as per IS

513 & 150 GSM Galvanised finish as per IS 277, including

8 mm Dia. 45 mm long, Zinc coated, CR1 grade Rawl

Plugs, 27 mm x 37 mm x 25 mm x 1.60 mm thick Soffit

Cleats, 2.64 mm Dia. High Carbon Spring Steel Wire

135 15 Connecting Clip, confirming to IS 513, 12.50 mm Th. 23.00 SM 800.00

Tapered Edge Gypsum Board Plain, conforming to IS 2095-

Part 1: 2011 Certified Boards, Screw Fixed to Ceiling

Sections, using 25 mm Drywall Screws [material-carbon

steel EN-ISO 7049/50, finish-case hardened Grey

Phosphating] at 230 mm c/c on Ceiling Sections & 150 mm

at Periphery of Ceiling. Square and tapered Edges of the

boards shall be jointed and finished so as to have a flush

look, including filling and finishing with Jointing

Compound, conforming to ASTM C475, & Joint Paper

Tape etc. complete with all Material, Labour with all Lead,

As per Approved Rates of New ED-1 (Hospital Block) of

Grid Ceiling: Providing and fixing in True Horizontal

level 600 mm. x 600 mm. false ceiling in 24 mm C.B Grid

system manufactured by GYPTECH or Eq. Brand using hot

dipped galvanized steel Section, Exposed Surface with pre

coated capping, Main Tee of size 24 mm x 32 mm., having

0.30 mm Gauge at every 1200 mm Center to Center

Maximum and Rotary Stitched Cross Tee of size 24 mm x

26 mm, having 0.30 mm Gauge at every 600 mm. c/c. and

Sub Cross Tee of size 24 mm x 26 mm, having 0.30 mm

Gauge at 1200 mm c/c. and wall angle of size 24 mm x

136 16 mm., having 0.40 mm Gauge fixed to the periphery of the 16.00 SM 1600.00

wall. The above grid is suspended with 50 x 50 x 2 m thk.

Jindal or Eq. make Aluminium Angle fix with necessary

Anchor Fastner on Slab Bottom Longer Span with

Accessories such as Nuts, Bolts, Washer, Fastners etc. in

both directions. Gyptech Vinyl Laminated Gypsum Panel

Square Edge Ceiling tiles manufactured by GYPTECH or

Eq. Make, of size 595 mm x 595 mm x 12 mm thermal

conductivity k = 0.16 W/m.K, having Moisture Resistance

& Fire Protection, having lighter, smoother and more

uniform Texture shall be laid evenly. The vinyl finish on

As per Approved Rates of New ED-1 (Hospital Block) of

Providing & Fixing simple 12mm thick commercial

Commercial Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) Rack of size 6' x4' and

137 17 depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" 34.00 Nos 7690.00

framing with necessary french polish hardware labour etc.

as per site incharge instruction and as per drawing

(SOR SMC - PG. NO-10 It No. 117)

DESCRIPTION QUANTITY UNIT

High Back Executive Chairs for HODs & Conference

room: Providing and Supplying highback office chair of

Aluminium dia cast base and armrest,50 density high mould

foam in seat and back, multi funtional mechenism, bifma

class IV gas lift and p.a castors. Liven HB Chair, Backrest

and headrest shell finish in high gloss black, Headrest

height can be adjusted, Armrest pad finish in polish finish,

Armrest height and width can be adjusted, backrest and seat

cushion in single-stitched semi-aniline artificial leather,

Seat shell finish in high gloss black, Seat depth and height

of sitting can be adjusted, Mechanism cover in silver

smooth powder coating. as per selection and complete the

work satisfactorily as per instruction of architect or

Engineer-in charge. Brands: Bristol Liven, Como,

Couhman, Sunon, Featherlite, Steelcase, Amber Luxor,

As per Approved Rates of SMC HQ

Mid Back Chairs for Conference Hall Extra: Providing

and fixing of midback office chair of pu rexin in seat and

back. Revolving chair with Back full nylon injected flat

back with perforated in 10mm round dia, dual cantilevered

arms with upholstery back dual upholstered, back height

adjustable, PU/rubber double castor as per selection and

complete the work satisfactorily as per instruction of

architect or Engineer-in charge. Brands: Bristol Liven,

Como, Couhman, Sunon, Featherlite, Steelcase, Amber

Luxor, Hayworth

As per Approved Rates of SMC HQ

PVC Chairs for Visitors of HODs, Nurse Station, Dr. Duty

Rooms: Providing and fixing PVC Arm Chairs having

Premium Matt Finish with soft feel texture finish, having

Size: 600 mm D * 560 mm W * 885 mm H, as per the

Specified Company of HOF, Feather Light, Wipro,

Godrej, Neelkamal, Supreme etc.as per selection and

complete the work satisfactorily as per instruction of

architect or Engineer-in charge

As per Approved Rates of New ED-1 (Hospital Block) of

Patients Stools (Revolving): Providing and fixing of Patient

Examination Stools of M.S Dia Cast Base with Epoxy

Powder Coating and SS 316 Seats, Revolving Stools Fitted

with M.S Ring for strength & Foot Rest, Four Legs M.S

Tubular construction as per the Specified company of HOF,

141 21 Feather light, Wipro, Godrej, Xylus, TSI etc. or Equivalent 5.00 Nos 1782.00

as per selection and complete the work satisfactorily as per

instruction of architect & Engineer-in charge. (Size Total

Height of Stool =23 inches, Seat Diameter = 15 inches,

Adjustable Height = 19-23 inches, Wheel base width=

As per Approved Rates of New ED-1 (Hospital Block) of

PVC Dustbin: Providing & Supplying of 8 to 10 in dia and

12 to 15 inc ht P.V.C. Dustbin of brand cello,pigeon etc.

complete as per selection & directed by the Architect and

approved by the Engineer in Charge.

Ref Rate from Valak Health Centre, East Zone-B

S.S 304 Grade Dustbin: Providing & Supplying of S.S

304 GRADE . Dustbin of brand SATYAKI,pigeon

143 23 etc,having size of 10 In. Diameter & 14" Height etc. 16.00 No 1,403.73

complete as per selection & directed by the Architect and

approved by the Engineer in Charge.

Ref Rate from Valak Health Centre, East Zone-B

Outdoor Floor Mat: Providing and fixing outdoor floor

matt of brand comforts or as per selection and complete the

work satisfactorily as per instruction of architect or

Engineer-in charge.(basic size of matt is 1.80 x 1.20 mt)

Ref Rate from Valak Health Centre, East Zone-B

Indoor Floor Mat: Providing and fixing indoor floor matt

of brand my floor or as per selection and complete the

work satisfactorily as per instruction of architect or

Engineer-in charge.(basic size of matt is 1.20 x 0.60 mt)

Ref Rate from Valak Health Centre, East Zone-B

DESCRIPTION QUANTITY UNIT

Wall Vinyl Sticker SQ.

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 SQ.

SMC SOR, PAGE NO.13,IT NO 147 (MR)

Solvent Vinyl Sticker (120 gsm) with Lamination (100 SQ.

SMC SOR, PAGE NO.13,IT NO 148 (MR)

5mm PVC sheet Eco Vinyl (Any size) SQ.

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all SQ.

waterproof materials FT.

SMC SOR, PAGE NO.13,IT NO 150 (MR)

TOTAL OF FURNITURE WORK

ELECTRIFICATION WORK

Sr. No. S.O.R Description Unit Total

Qnty. Without GST

. and with C.C.

ELECTRIFICATION WORK OF BUILDING

A INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

2 1-2-1. (For point wiring in bathroom and W/C and washbasin area 0 Pt. 224.73 -

in residential quarters reduce overall rate by 50% of point

wiring for light.)

Point wiring for secondary light point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary

light with accessories erected on Metal / PVC / wooden

box covered covered with appropriate front plate modules

2 1-1-4. erected on / in wall / ceiling for open / concealed wiring. 16 Pt. 151.50

with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.as per pipe erected with following type of

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of

3 1-2-2. following type erected on PVC / Metallic/Wooden box, 60 Pt. 629.23

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

DESCRIPTION QUANTITY UNIT

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling

as per pipe erected with following type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm

Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories, Cat.

Point wiring for Two Way Controlled Light Point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

but for 2 nos of 2.5 sq.mm FRLS PVC insulated copper

conductor wires with 1 no 1.5 sq.mm FRLS PVC insulated

conductor wire (Green color for earthing) for 16 A AC

starter with universal socket up to satisfaction of E.I.C.

(Excluding Main Line, including 16A AC starter & Socket)

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang, Cat. III 1 Ea. 153.52

[B] For Two Gang, Cat. III 1 Ea. 200.99

DESCRIPTION QUANTITY UNIT

(4) TV Co-axial Socket outlet, Cat. III 1 Ea. 153.52

(7) Blank Plate Single, Cat. III 1 Ea. 24.24

(8) Computer RJ-45 socket, Cat. III 1 Ea. 153.52

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

Complete, Cat. III

(19) Modular Indicating Call Bell, Cat.III 1 Ea. 314.11

(20) Modular Buzzer, Cat.III 1 Ea. 143.42

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings &

10 1-3-2. Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed.

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

11 1-3-4. etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

12 1-3-5. accessories of PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of following size .

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

13 FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(A) (A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 280 Mtr. 59.59

(b) 2 wire 2.5 sq. mm 500 Mtr. 78.78

providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

14 stranded wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and accessories

(A) (a) 2 wire 4 sq. mm 20 Mtr. 107.06

(d) 3 wire 4 sq. mm Mtr. 159.58 -

Providing & Erecting approved make following size of TV

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary

15 1-4-6 conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation.

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

(2) Two Pairs 0 Mtr. 19.19 -

(b) Armoured [Jelly Filled]

(1) Ten Pairs 0 Mtr. 120.19 -

(2) Twenty Pairs 0 Mtr. 190.89 -

(3) Fifty Pairs Mtr. 446.42 -

Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard approved

with krone strips

(a) Suitable for 10 pair 0 Ea. 949.40 -

(b) Suitable for 20 pair 0 Ea. 1311.99 -

(c) Suitable for 50 pair Ea. 1678.62 -

DESCRIPTION QUANTITY UNIT

Supplying & erecting M.S. Box having 16 Gauge painted

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size.

Providing & erecting Switch board for Computer or

electric apparatus consisting of following items in single

board erected on PVC / Metal/Wooden board

concealed/open with 3 mm thick PC (Polycarbonate) /

19 Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 10 Ea. 1081.71

Decorative call bell Ting-tong box type 250 volts

complete erected

L.T. SWITCHGEAR AND DIST. BOARD &

MICRO. BASED LSGD RELEASE MCB , 4 POLE, 25 KA

R Y B INDICATOR

ON OFF INDICATIOR

40 AMP., 4 POLE MCB-B CURVE, 10 KA, WITH ON OFF

INDICATOR : 4 Nos.

40 AMP., 4 POLE MCCB, 25 KA, FOR FIRE PUMP - WITH

ON OFF INDICATOR : 1 No.

32 AMP., 4 POLE MCB-C CURVE, 10 KA, FOR DRINKING

21 MR WATER PUMP WITH ON OFF INDICATOR : 1 No. 1 Ea. 152762.50

32 AMP., 4 POLE MCB-CURVE, 10 KA,WITH ON OFF

INDICATOR (SPARE) : 1 No.

63 AMP., 4 POLE MCB-B CURVE, 10 KA (SPARE) WITH

ON OFF INDICATOR : 1 No.

40 AMP., 4 POLE MCB-B CURVE, 10 KA, (SPARE) WITH

ON OFF INDICATOR : 1 No.

16 AMP. 4 POLE MCB-B CURVE, 10 KA, (SPARE) WITH

ON OFF INDICATOR : 1 No.

16 AMP. ., 2 Pole, MCB-B CURVE, 10kA, (SPARE) WITH

ON OFF INDICATOR : 1 No.

16 AMP., 2 Pole, MCB-C CURVE, 10kA, (SPARE) WITH ON

OFF INDICATOR : 1 No.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type

22 3-11-5. outgoing Per phase isolation type (PPI)

(b) sheet steel double door

(ii)6 way 2 Ea. 2913.85

(iii)8 way (As Main GFLDB, FFLDB, SFLDB, TFLDB) 0 Ea. 3412.79 -

(iii) 8 way (As Raw Power DB {RPDB} GF + FF + SF) Ea. 4025.86 -

(ii) 6 way (As A.C. DB {ACDB} GF + FF + SF) Ea. 3437.03 -

RCCBs, 30 mA, 10 KA, 40 Amp., FP, Cat. III

24 3-10-4.(b)MCB, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 2 Ea. 638.32

RCCBs, 30 mA, 10 KA, 25 Amp., DP, Cat. III

MCB single pole 6A to 25A, 10 KA Cat. III (10

DESCRIPTION QUANTITY UNIT

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box

having following capacity, Cat III, (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity

& confirms to IS : 8828 in existing box having following

capacity, Cat (III), 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity, Cat III, 6 to 32 Amp.

Supplying & erecting approved make Electronics Starter

and relay for air conditioners in ABS plastic moulded

housing. Company fabricated with bakelite terminal for

connection with silver coating bimetallic contact in

switching device for o/p with following features.

30 3-10-6-B(1) Low Voltage Protection below 130 V 0 Ea. 886.78 -

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22

Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

Plastic enclosure fitted with DIN rail suitable for

incorporating One / Two nos. MCB

Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

Providing & erecting Medium Voltage Danger Notice

35 3-13-3 Board sticker as per language suggested by engineer 1 Ea. 26.26

incharge of standard size as per IS-2551

providng and erecting Approved make single phase

electronic energy meter rating 5A/20A/40A based on

ASIC (Application Specific integral circuit) digital

technology with accuracy Class-I, temper proof, free from

36 3-15-2 effect of external magnetic field with phase, earth, reverse 0 Ea. 1738.21 -

and impulse indications, 6 digit electro-mechanical counter

suitable to work on 120 V to 300V, 45 - 55 Hz., housed in

robust enclosure complete to be erected as directed with

year replacement guarantee. Cat. III

providng and erecting Approved make energy meter

phase 4 wire unbalanced load rating, 10A to 60 Amp.

based on ASIC(Application specific Integral Circuits)

digital technology with accuracy Class - 1 , temper proof,

37 3-15-3 free from effect of external magnetic field with 3 phase 0 Ea 2696.70 -

indication, earth & impulse indication, 6 digit electro

mechanical impulse counter, suitable work on 120 V to

300V per phase 45-55 HZ, housed in robust enclosure with

erection as directed. Cat. III

C INDOOR LIGHTING ITEM

DESCRIPTION QUANTITY UNIT

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

38 Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 35 Ea. 295.93

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 51 Ea. 373.70

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional

Supplying and erecting LED lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

39 holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

LAMP holder, Cat. III

(i) 2 to 3 watts 0 Ea. 69.69 -

(ii) 5 to 8 watts 20 Ea. 112.11

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(ii) 11-15 watts, Surge-2 KV, Cat. III 0 Ea. 427.23 -

(iii) 16-20 watts, Surge-2 KV, Cat. III 8 Ea. 589.84

(iv) 22-24 watts, Surge-2 KV, Cat. III 0 Ea. 758.51 -

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, Ct. III Ea. 2348.25 -

(G) Step Light having Aluminium die cast and ABS

Plastic material.

40 (i) 5 watts, Direct/Indirect luminaire, Cat. III

DESCRIPTION QUANTITY UNIT

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-

voltage protection.

(iv) above 90 to 120 watts, Cat. III

(Wall mounting outside)

Outdoor street light fitting side entry with clear acrylic

/plastic / polystyrene cover complete with starter, polyester

choke copper wound complete erected with 40/36 watt tube

holders. with lead wire and connections. (For Second Floor

(a) With 1 tube 40 watt.120 cms, Cat. III Ea. 1111.00 -

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, Cat. III 0 Ea. 1794.77 -

Supplying and Erecting Of L.E.D. type High bay fixture

having Power Consumption of following watts with, Input

Voltage 110 - 290 V.AC with full efficiency, Power Factor

> 0.9 with 50/60 HZ, CCVC LED Driver used for

2-17- maximum power saving, Best Quality luminium alloy

4 housing and aluminium Dome for etter heat dissipation,

CCT Cool white (6000K), CRI 80, Beam angle >

dgrees, working temperature -20 degc to +55 degc, Body IP

D OUTDOOR LIGHTING ITEM

Supplying and erecting B class Galvanized iron pipe having

smooth finished bore of the pipe on both ends erected nuts and

bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.

(A) 25 mm dia Mtr. 212.10 -

(B) 32 mm dia Mtr. 252.50 -

Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

40 6-4-3. doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following

(F) 200mm x 180mm x 100mm [deep] Ea. 639.33 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper conductor

for 1.1 KV. to be laid on wall with necessary clamps or in

41 4-4-4. existing trench / pipe at road crossing or floor of

following size of cables. (For wall mounted street light /

flood light luminaries)

(B) 4 core 4 Sq. mm Mtr. 426.22 -

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (For wall mounted street light /

flood light luminaries)

(A) 2 to 4 core 2.5 / 4 Sq. mm Ea. 37.37 -

DESCRIPTION QUANTITY UNIT

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (For wall mounted street light /

flood light luminaries)

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 16G CRCA sheet

duly epoxy power painted inside and outside with hinged doors

and locking arrangement consisting of suitable size of 4 Pole

MCB and 4 pole contactor (cat-III)with analog time switch, auto

manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer

in charge.(For wall mounted street light / flood light luminaries)

D FAN AND RELEATED ITEM

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control

and all remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with

surge, over current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as required.[

Make shall be approved by Engineer in Charge]

(A) 1200 mm Sweep (48")

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

44 5-2-3. and pierced through a 16 Gauge M.S. box / Heavy Duty 55 Ea. 108.07

PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover

the fan hook or Fan box.

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

46 5-3-4. mounted low noise operation suitable for medium duty 12 Ea 2054.34

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM, Cat. III

Providing suitable M.S. louver shutter of the Exhaust

Supplying & erecting electro galvanised G.I. wire micro

mesh jali cover of grade 304 required size with suitable

wooden frame duly fitted in wall outside of exhaust fan for

insect protection.

Providing & erecting fresh air fan 250 mm dia with

square frame make of ABS body with louvers, Cat. III

DESCRIPTION QUANTITY UNIT

Supplying and erecting approved make oscillating type

medium duty bracket fan with Aluminium Blades A.C.

23OV. 50cy/s, with thermal overload protection wall

mounted with height adjustment and rotary tilting device

complete with guard, pull cord for speed and oscillation

flexible Core plug top complete erected with lead wires as

E EARTHING SYSTEM

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper

Providing and erecting Annealed bare Copper wire 8 to

Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG.

Providing and erecting Pipe type earthing having

cms. long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

Providing and erecting Pipe type earthing with 40 mm dia

2.5 mtr long 'B' grade G.I. pipe with necessary coupling

buch buried in specially prepared earth pit & G.I. earth wire

of 8 SWG erected & connected as directed

For using salt and charcoal / coke as required for pipe type

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr 2 Ea. 7095.25

-Back filling Compound :1 no. Bag of 25 Kg. two for body

earth and one for neutral earth

[C] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than 1 Ea. 10593.89

normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

F CABLES, WIRE AND TERMINATIONS

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (From

DISCOM energy meter to Main L.T. panel)

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) Mtr. 855.47 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size of

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) Mtr. 1586.71 -

DESCRIPTION QUANTITY UNIT

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

Providing & laying. R.C.C. Hume pipe for cable to be laid

90 cm. below ground across the road crossing or on floor

with necessary material in an approved manner and making

the ground as per original. (F) 100 mm dia.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable,

(A)50 mm outer dia

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

59 4-4-3. laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) Mtr. 1345.32 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size of

(A) 4 core 2.5 Sq. mm 0 Mtr. 269.67 -

(B) 4 core 4 Sq. mm 350 Mtr. 362.59

(C) 4 core 6 Sq. mm 300 Mtr. 508.03

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

61 4-4-5. laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm 0 Mtr. 673.67 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size of

(B) 4 core 16 Sq. mm 0 Mtr. 984.75 -

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber ring

68 4-6-3. for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber ring

63 4-6-3. for PVC insulated armoured cable complete with out going 100 Ea. 66.66

tails, insulating tape etc for following size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

(B) 2 to 4 core 6 Sq. mm 0 Ea. 38.38 -

(C) 2 to 4 core 10 Sq. mm 0 Ea. 43.43 -

(D) 2 to 4 core 16 Sq. mm 0 Ea. 54.54 -

(E) 2 to 4 core 25 Sq. mm 6 Ea. 59.59

Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

DESCRIPTION QUANTITY UNIT

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT -

G WATER COOLER AND PURIFIER

Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚ C within a hour, The water cooler should be

67 8-13-1. comprising of hermetically sealed compressor, fan motor, 2 Ea. 41342.33

condensing unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel.

SITC of Water Purifire Eureka Forbs Make AG 200 or

Supplying & erecting bank of all polypropylene condenser

(APP type) with standard capacity of 2,3,5,7, 10,12.5 &

KVAR units of P.F. correction for operation on 3 phase

c/s, 400 /440V (+ / - 10%) with externally discharging

resistance, earthing terminal & built on angle iron of

channel iron frame work and provided with terminal cover

box. Complete erected on provided iron bracket or on floor

duly tested by license.

H PUMP SETS AND STARTERS

Providing & erecting open well type horizontal mono

block pump set with stainless steel body having following

(D) 1 HP Three phase open well motor pump set suitable

for 190 LPM discharge @ 21 mtr. head, suitable for 32mm

dia. delivery pipe.

Supplying submersible pump set suitable for bore of

mm. dia. or more having three phase motor capacity not

more than 3 H.P. of different range with following capacity

(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs.

Respectively head suitable for 50 mm dia. delivery pipe,

Supplying & erecting approved make self-priming

domestic monoblock water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply with

72 9-3-2. metallic flange, and M.S. impeller delivery and following 1 Ea. 7679.03

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia.

Delivery. Cat.III

Supplying and erecting push button operated fully

automatic Star-Delta starter with 3 Nos. of 15A.rating

contactors and directly operated thermal overload relay

having 10-21A range and erected in sheet steel enclosure

for 3 phase 415V. 50 c/s. A.C. motors from 7.5 to 15H.P.

complete erected on

(A) P.W. Block with necessary connection, Cat.III Ea. 10483.80 -

(B) Angle iron frame add to the above Ea. 204.02 -

Supplying and erecting Direct On-line Electronics Starter

with 2-5/4-10/8-14/10-16 Amp. Rating relay (variable

current setting) directly operated in totally insulated elegant

enclosure and 18 Amp. Rating power relay with start - stop

button for single phase operation up to 3 HP as per

73 9-1-2 complete erected on P.W. Block with following features. 0 Ea. 1603.88 -

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping.

DESCRIPTION QUANTITY UNIT

Supplying and erecting Direct-on-line, Starter with

15A.rating contractor and with 4-14A. range, directly

74 9-1-3. operated thermal overload relay in sheet steel enclosure for 2 Ea. 2046.26

3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete

erected on P.W. Block with necessary connection. Cat.III

Supplying & erecting approved make Automatic liquid

level controller 6A. with sensor testing as per instruction

75 9-5-1. of Engineer in charge on site complete with wiring 1 Ea. 2355.32

connection with existing wires , with copper conductor

from pump to upper and lower tank.

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single

pole MCB with 20 Amp. Plug socket, company fabricated

powder coated sheet steel enclosure erected as directed

with connection.

[A] Metal Clad Socket with metal clad top. Cat.III 1 Ea. 527.22

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III 1 Ea. 660.54

Supplying and erecting, commissioning and testing of

Diesel Generating set confirming to IS: 4722:1968 &

BS:5514 having continuous rating, 3 phase, 415 volts,

cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders

developing suitable BHP not less than following capacity

at 1500 RPM with 10% overload for one hour in 24 hours

with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and

lubricating oil filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold, standard set of tools

with adjustable spanners, screw drivers, cylinder head to

cover, joint cylinder head to exhaust, element lube oil filter,

12 / 24 volts electric starting equipment complete with

standard heavy duty battery, dynamo, cut-outs, ammeter,

necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer and vertical hot air duct

logged with asbestos rope, save oil trays, exhaust piping of

required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited,

self regulated, screen protected, with excitation system,

capable of delivering the rated system output at 415 volts,

phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

77 conforming to IS-4722- 1968 with voltage regulation +/-

5% of rated voltage from no load to full load. Both the

engine and alternator fitted on a common fabricated steel

base plate with antivibration mounting engine and

alternator both connected to each other by flexible flange

coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB

/ MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator

& control panel shall be connected with provided suitable

capacity armoured cable and complete with Acoustic

enclosure (canopy) made out of 16 SWG CRCA Sheet,

sound absorbing material Rockwool of 64 density &

mm thick conforming to IS:8183 / PU Foam of 40 Density -

at least 40 mm. The resin bonded rockwool covered from

inside the canopy by perforated sheet with 3/4 mm holes,

sound level not more than 75 dB at a distance of 1 mtr, as

per PVCT norms. Erection, commissioning and satisfactory

testing as per requirement with first filling of fuel, oil, etc.

with guarantee / Warrantee of complete system for Two

years. & with obtaining all necessary certificate from

Electrical Inspector. The Capacity and Ratings of DG sets

(H) Continuous Rating of 50 KVA ,BHP not less than

DESCRIPTION QUANTITY UNIT

Providing & erecting approved make AMF control panel

suitable for following size of 3 phase, 415 V., 50 cycles,

A.C. diesel generating set complete of scope as detailed

1) Power module: A pair of electromechanically

interlocked contactors (for mains & generator) Overload

relay for generator contactor Neutral contactor for mains

and generator Power socket for connections.

2) Control and metering module: Line voltage monitor.

Generator voltage monitor Ammeter 3 items attempt start

10-4- facility. Air circuit breakers/MCB/MCCB of suitable rating

3 for auto/manual operation. Auto/manual switch. Emergency

stop push buttons. Manual start push button. frequency

meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely

event of Low lube oil pressure High cylinder head

temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start .

Emergency stop battery charger.

The AMF Panel of following capacity

(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be

used.[2] Micro processor based / PLC, ACVVVF, vector control

drive with encoder feedback closed loop system shall be used for

lift car and door operation which shall be full collective selective

operation hall call demand response, UP/DOWN hall stops, Main,

Up/ Down Contactor with overload and phase reversal relay and

safety controls.

[3] Car with M S platform with bracings of adequate size and to

sustain the impact load cabin + passenger with safety factor of fire

for steel and side panels of Stainless steel of sheet of grade

duty. Car ceiling will be S.S. finishes with aesthetic appearance

with LED ceiling lights. Car flooring shall be of anti skid PVC

with choice of colour of engineer in charge. Car doors shall be of

stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S.

finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and

all floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline

finish steel grade of 304 with key holes and infrared curtains with

Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along

with alarm switch shall be provided. Also, Emergency Light &

Fan should start immediately without any Time Delay as soon as

[6] Digital scrolling indicator system for up-down arrow along

with floor position indicator shall be provided inside the car and

[7] Full height infra red curtain with multiple cross / crossing

light beams shall be provided.[8] Automatic Rescue Device

(ARD) shall be provided accordingly of passenger capacity with

Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading

shall be provided such that doors kept open till excess load is

DESCRIPTION QUANTITY UNIT

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer

shall be provided.

[12] Voice annunciator with suitable music shall be provided in

[13] Self diagnostics system for operational and safety parameters

shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as

per actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch

shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room

and monkey ladder for lift pit should be provided by the lift

agency, along with the other steel structure works, foundations for

the machine etc…

[16] In the hoist way fascia plate shall be provided without any

extra cost, where ever required as / if directed by engineer in

81 [17] Permanent wiring with necessary safety devices like RCCB

in all circuit, Over Voltage Under Voltage protection and THD

eliminator in circuit for lift machine room and lift well with

proper numbers of light points, with fixtures, exhaust fan and

plug points shall be provided by the agency. Only 3 phase Power

Supply shall be made available by department in lift machine

room. Necessary Earthing as per Lift Act/Rules shall be arranged

by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift

shaft and machine room related to erection of lift shall be made by

lift agency without any extra cost. (granite/marble fixing around

all landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents

and liaison services for obtaining all necessary permission from

lift inspector and other authorities. [20] acrylic transparent

licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift

& escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by

concern licensing authority

5.agency has to provide third party insurance upto

completion of free maintenance period and submit the

document for the same.

[21] Car Panel Operating Buttons with floor position

indicator/buttons must be of Auto Glow type clearly visible

when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car.

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS

for PREMIUM category

1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site

programming facility, Anti nuisance, Pte-opening, BMS/RMS

with necessary online real time monitoring system having

necessary connectivity for remote monitoring & other suitable

supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration &

brail mark with arrival gong and hall lantern & TFT Screen

in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock

finish / Hair Line / Honeycomb for car and all Doors, All

landing doors must have fire rating up to 2 hours and car

door must have multi-level crisscross beam door protection.

DESCRIPTION QUANTITY UNIT

4. To & fro communication system & wiring (i.e. car , control

room & guard room ) and Each elevator are equipped with remote

monitoring system.agency has to provide mobile app and user id

and password for monitoring

15/16 Passengers, Ground plus 2 upper floor with Rated

Speed of 1.0 m/sec., (strecher lift)

(C) With General PLUS ADDITIONAL SPECIAL

FEATURES attached herewith. Prem. Cat.

J INVERTOR STABILIZER

Supplying and erecting of 1850VA Sine wave Digital

Inverter systems.

Supplying and erecting of 12V/150AH Tubular battery

for 1 hrs battery backup.

84 MR Supplying and erecting of 1KVA Stabilizer. Ea. 10225.64 -

Supplying and erecting approved make online Un-

interruptible Power Supply system comprising flat cum-

boost charger, static Inverter & sealed maintenance free

SMF batteries. The charger having operating capacity for

input 160-270V AC & inverter having output 230V,50 Hz

Ac with 0.8 load power factor with battery, over/under

voltage output with over load & short circuit protection

equipment. The system housed in CRC sheet duly powder

coated paint with following power backup.with MS painted

batteries stand, 10% Overload capacity for momentary load.

(FOR class room)

(A) 1 KVA with 1Hr Backup

(B) 2KVA with 1Hr Backup 1 Ea. 47268.00

(C) 3 KVA with 1Hr Backup 0 Ea. 81810.00 -

(D) 5 KVA with 1Hr Backup 0 Ea. 128270.00 -

Wall Mount Speaker

SETC of Philips/Ahuja Make or equivalent

High power ABS wall mounting box speaker in gray colour

for indoor public address and background music in

locations of high ambient noise. Ideal for Schools.

Input Power : 25W RMS

Power Tapes on 100V : 25/15/10/5W

Impedance : 400/670/1k/2kΩ

Frequency Response : 120-15,000Hz

SPL at 1kHZ (1W/1m) : 94dB

SETC of Philips/Ahuja Make or equivalent

High Wattage PA Mixer Amplifier

6 Mic & 2 Aux Inputs.

Preamplifier and Line Output for connecting to a Booster

Amplifier and for recording the programme.

Line Input for connecting the output from any external

mixer or permitting to be used as a Booster Power

Resettable circuit breaker for protection against overload

and short circuit.

Instant transfer to DC power (Car Battery) if AC power

83 MR Box Speaker/Driver Unit selector switch. Bass boost 0 Ea. 21735.46 -

defeated at Driver Unit position for safer operation of

Power Output : 300W Max., 250W RMS at 10% THD,

220W RMS at 5% THD, 200W RMS at 2% THD

Output Regulation : ≤ 2 dB, no load to full load at 1kHz

Input Channels : 6 × Mic 0.65mV/4.7kΩ, 2 × Aux

100mV/470 kΩ, 1 × Line 1V/50kΩ

Frequency Response : 50-15,000Hz ±3dB

Signal to Noise Ratio : 60dB

Tone Controls : Bass: ±10dB at 100Hz, Treble: ±10dB at

Outputs : Preamp 200mV/600Ω, Line 1V/1kΩ

Speaker Outputs : 4Ω, 8Ω, 70V & 100V

Digital Player : MP3

Unidirectional Player

Dynamic with USB, SD and MMC Card

DESCRIPTION QUANTITY UNIT

SETC of Philips/Ahuja Make or equivalent

Multi Purpose Applications

All purpose PA microphone reproducing intelligible, crisp

and a bright sound

Suitable for multi-purpose PA installations.

Supplied with quick detachable holder with 3-pin

professional XLR connector & 6 mtrs. twin core shielded

low noise cable.

Frequency Response : 50-15,000Hz

Sensitivity : 2.2mV/Pa

Impedance : 500Ω

PA MICROPHONE STAND

SETC of Philips/Ahuja Make or equivalent Microphone

stand employ sturdy mechanism ensuring trouble free

movement and positioning of microphone. These stands are

functional and resistant to rust, due to superior quality of

85 MR chrome plating/powder coating. stand with 5/8” 27 TPI to 0 Ea. 2109.48 -

match all MICROPHONES.

Type : Floor Stand

Height : 920-1500 mm

Base Dia : 230 mm

Weight : 4.60kg

Speaker Wire (Copper)

86 MR SETC of 1.5 Sq.mm. 2 Core Oxygen free Copper Speaker 0 Mtr. 126.27 -

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed.

I FIRE SAFETY EQUIPMENTS

Supplying stand first AID box with antiseptic cream,

medicine for use on wounds due burn, crepe bandage,

gauge bandage, medicated ready to use bandage (Band-aid)

adhesive tape for medicinal user, Scissors, anti-septic

solution (Savlon or similar) etc. (All above contents shall be

of standard makes)

Supplying and erecting floor mounting stand for keeping

four nos. of FIRE buckets comprising 1500 mm in length,

900 mm height frame made out of 30mm X30 mm X 4 mm

angle iron with cross supports for legs, welded with 4 hooks

and duly painted with one coat of red lead and two coats of

approved enamelled silver paint.

Supplying FIRE bucket round bottom of 9 litres

capacity made out of 24 gauge G.I. sheet with extra handle

93 10-2-5 at bottom duly painted white inside and Red out side with 1 Ea. 252.50

FIRE mark, filled with dry-sand and kept on existing stand

provided or hung on wall hook.

Supplying & erecting carbon dioxide (CO2) fire

extinguisher user of following capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [A] For 4.5 Kg Capacity

Supplying & erecting ABC powder type 'Ceasefire' type

95 10-2-27Fire extinguisher as per IS 13849 or 1 Kg capacity with 1 Ea. 999.90

necessary clamp for erection on wall

M OUTDOOR & CAMPUS LIGHTING ITEM

94 STLHQSETC of GI Pipe Pole | 6 m Long 10 Nos. 5470

95 STLHQSETC of Bracket | single arm 0.5 m 10 Nos. 973

96 STLHQSETC of Bracket | Double arm 0.5 m 0 Nos. 1364 -

97 STLHQSETC of Bracket | Triple arm 0.5 m 0 Nos. 2441 -

98 STLHQSETC of Bracket | single arm 1.0 m 0 Nos. 1586 -

99 STLHQSETC of Bracket | Double arm 1.0 m 0 Nos. 2513 -

100 STLHQSETC of Bracket | Triple arm 1.0 m 0 Nos. 3308 -

Providing & Constructing 1:2:4 CC foundation of 6 m long GI Pipe

101 STLHQ 10 Nos. 1440

Supply and laying of GI "B" grade pipe for cable guard/ road crossing

102 STLHQ 40 m 480

with making of Zari for 40 mm Ø

DESCRIPTION QUANTITY UNIT

Supply and laying of GI "B" grade pipe for cable guard/ road crossing

103 STLHQ 0 m 580 -

with making of Zari for 50 mm Ø

104 STLHQCable end termination for 4 x 6 sq mm (Single Cable) 25 Nos. 130

105 STLHQCable end termination for 4 x 10 sq mm (Single Cable) 0 Nos. 150 -

SETC of 1.1 kV grade XLPE insulated Al conductor armoured cable |

106 STLHQ 0 m 120 -

SETC of 1.1 kV grade XLPE insulated Al conductor armoured cable |

107 STLHQ 0 m 131 -

Laying of cable with excavation of trench having depth of 75 cms and

108 STLHQrefilling with clay and covering with 38 mm Ø ID DWC pipe to be laid 0 m 150 -

in | Soft soil/ Kachcha Road

Laying of cable with excavation of trench having depth of 75 cms and

109 STLHQrefilling with clay and covering with 38 mm Ø ID DWC pipe to be laid 0 m 180 -

in | Hard Murrum/ Asphalt Road

Laying of cable with excavation of trench having depth of 75 cms and

110 STLHQrefilling with clay and covering with 50 mm Ø ID DWC pipe to be laid 0 m 160 -