Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC THEKKEKOTTARAM RAMANTHALI PO KANNUR DIST KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | ₹34.0 L Quoted ₹34.4 L | L1 | Accepted-AOC Accepted, being lowest |
| 2 | L2₹39.9 LRejected-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | ₹39.9 L | L2 | Rejected-AOC Rejected, not being lowest |
| 3 | L3₹40.5 LRejected-AOC RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | ₹40.5 L | L3 | Rejected-AOC Rejected, not being lowest |
| Sl No | Description | Qty | Unit | SANDR L3 | Palace constructions L1 | KDR CONSTRUCTION L2 |
|---|---|---|---|---|---|---|
| 1.00Note: 1. Contractor should take necessary precautions such as laying plastic sheets on floors/covering windows etc to ensure that paint drops and splashes are not dropped on floors/furniture/joinery etc. in case paint splashes/drops are found contractor should clean all the paint marks up to the satisfaction of Engg in charge otherwise a recovery of Rs 10/Sqm shall be made for the qrtrs/bldgs affecte 2. Contactor should procure minimum 50% of materials required for the contract within 20 days of getting Sample/Make approval and kept in store so that non availibility of materials is not faced at any stage of work progress. 3. Contractor should complete all works related to welcome maintainence within 05 days from date of handing over keys. | ||||||
| 2.00 | Material & labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint on wall (interior grade) all as specified and as per manufacture's instructions. | 22,700 | Sqm | 35 ₹7.9 L | 22 ₹5.0 L | 44 ₹10.0 L |
| 3.00 | Material & labourfor preparation of old treated surfaces and applying two coats of acrylic emulsion paint on wall (interior grade) all as specified and as per manufacture's instructions. | 1,200 | Sqm | 65 ₹78,000 | 30 ₹36,000 | 88 ₹1.1 L |
| 4.00 | Material & labour for preparation of wall surfaces by scrubbing using nylon /jute/wire brushes scrapper blades and applying wall care putty interior or exterior on internal or external wall surface not less than 1mm thick and finshing the surface even and smooth complete all as specified and as directed. | 1,000 | Sqm | 25 ₹25,000 | 150 ₹1.5 L | 90 ₹90,000 |
| 5.00 | Material & labour for preparation of old painted surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed. | 4,300 | Sqm | 55 ₹2.4 L | 32 ₹1.4 L | 48 ₹2.1 L |
| 6.00 | Material & labour for preparation of old decorated painted surfaces and applying one coat of synthetic enamel paint on old AC board ceiling complete all as specified and as directed. | 3,700 | Sqm | 60 ₹2.2 L | 35 ₹1.3 L | 50 ₹1.9 L |
| 7.00 | Material & labour two coats of French polishing on old wood surfaces of any description, width or girth including cleaning and preparing the surface all as specified and as directed. | 500 | Sqm | 75 ₹37,500 | 65 ₹32,500 | 75 ₹37,500 |
| 8.00 | Material & labourfor preparation of old painted surfaces and applying one coat of epoxy paint to steel surfaces complete all as specified and as directed. | 1,700 | Sqm | 80 ₹1.4 L | 65 ₹1.1 L | 50 ₹85,000 |
| 9.00 | Material & labour for preparation of old painted surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces complete all as specified and as directed. | 600 | Sqm | 50 ₹30,000 | 30 ₹18,000 | 65 ₹39,000 |
| 10.00 | Material & labour for preparation of old painted surfaces and applying one coat of terracota colour interior emulsion painting on wall cladding complete all as specified and as directed. | 250 | Sqm | 65 ₹16,250 | 45 ₹11,250 | 42 ₹10,500 |
Updated dates
Tender Value
₹45.0 L
EMD Value
₹89,980
Closing Date
14 Apr 2026, 5:15 pmClosed
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2026_MES_756525_1
GE MAINT EZHIMALA 8824
Open Tender
Civil Works
330 days
Ezhimala
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹89,980
7 May 2026
16 Mar 2026
20 Apr 2026
16 Mar 2026
14 Apr 2026
31 Mar 2026
16 Mar 2026 - 23 Mar 2026
Note: 1. Contractor should take necessary precautions such as laying plastic sheets on floors/covering windows etc to ensure that paint drops and splashes are not dropped on floors/furniture/joinery etc. in case paint splashes/drops are found contractor should clean all the paint marks up to the satisfaction of Engg in charge otherwise a recovery of Rs 10/Sqm shall be made for the qrtrs/bldgs affecte 2. Contactor should procure minimum 50% of materials required for the contract within 20 days of getting Sample/Make approval and kept in store so that non availibility of materials is not faced at any stage of work progress. 3. Contractor should complete all works related to welcome maintainence within 05 days from date of handing over keys.
Material & labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint on wall (interior grade) all as specified and as per manufacture's instructions.
Material & labourfor preparation of old treated surfaces and applying two coats of acrylic emulsion paint on wall (interior grade) all as specified and as per manufacture's instructions.
Material & labour for preparation of wall surfaces by scrubbing using nylon /jute/wire brushes scrapper blades and applying wall care putty interior or exterior on internal or external wall surface not less than 1mm thick and finshing the surface even and smooth complete all as specified and as directed.
Material & labour for preparation of old painted surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.
Material & labour for preparation of old decorated painted surfaces and applying one coat of synthetic enamel paint on old AC board ceiling complete all as specified and as directed.
Material & labour two coats of French polishing on old wood surfaces of any description, width or girth including cleaning and preparing the surface all as specified and as directed.
Material & labourfor preparation of old painted surfaces and applying one coat of epoxy paint to steel surfaces complete all as specified and as directed.
Material & labour for preparation of old painted surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces complete all as specified and as directed.
Material & labour for preparation of old painted surfaces and applying one coat of terracota colour interior emulsion painting on wall cladding complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.Demolished item should be removed and deposited at any place inside INA as directed. No extra cost will be given against removal.
Demoltion of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).including floor tiles. Demolished item should be removed and deposited at any place inside INA as directed. No extra cost will be given against removal.
Material & labourcoloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15mm thick screed bed in CM 1:6 all as specified and as directed.
Material & labour Glazed ceramic coloured tiles 600x300x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat plaster in CM 1:4 all as specified and as directed.
Material & labour for cement concrete 1:5:10 Type F2 using 40 mm graded stone aggregate as in filling in sunken floors all as specified and as directed.
Material & labour for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick or concrete surfaces in sunken floors mixed water proofing compound finished even and smooth without using extra cement all as specified and as directed. Note:WPC will be measured and paid seperatly all as specified and as directed.
Supply only water proofing compound all as specified and as directed.
Material & labour 40 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate) finishing cement concrete surfaces even and fair complete all as specified and as directed
Material & labour Virified tiles any shade 9 mm thick (square/ rectangular) polished, area of each tiles nt exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and fixed over screed bed 15 mm CM 1:6 all as specified and as directed.
All as per Sl item No 19 here-in -before above but in skirtings all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified and as directed.
Material & labour machine cut granite stone slab 18-20mm thick of approved colour and shade as in floors, kitchen platform, steps and other similar situations including cutting as required,moulding edges to round or half round over and including 15mm thick backing coat in CM 1:4 laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing all as specified and as directed.
Supply & fix in repairs Matt finish sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160m all as specified and as directed.
Taking down chowkats or frames not exc. 1.5 Sqm each but without taking off shutters from the frames including making good of disturbed surfaces with cm 1:4 or PCC 1:2:4 Type B0 to match with existing surfaces all as specified and as directed.
Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each but without taking off shutters from the framesincluding making good of disturbed surfaces with cm 1:4 or PCC 1:2:4 Type B0 to match with existing surfaces. all as specified and as directed.
Supply & fix Pressed steel frames for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and as directed.
Material & labour for Cement concrete 1:3:6 Type C0 using 12.5 graded aggregate as filling inside pressed steel frame chowkat all as specified and as directed
Supply & fix powder coated aluminium frame for doors, windows, ventilators, partitions,kitchen cupboars frame etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (minimum thickness of powder coating not less than 50 micron).
Supply & fix Powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beaking screws etc completeall as specified and as directed.
Supply & fix Powder coated aluminium window and ventilator shutters fixed or sliding type without sash bar, aluminium section weighing 0.55 kg/m incl necessary joining cleats rubber packing anodised aluminium snap beading screws etc complete all as specified and as directed.
Taking down shutter of any description exc. 1 Sqm and n. exc 2 Sqm each complete all as specified and as directed.
Supply & fix Aluminium composite panel 4 mm thick of approved colour and shade fixed with self tapping screws on aluminium frame work in suitable shape and size complete all as specified and as directed . Note: S&F aluminium frame work if required shall be measured and paid seperately
Supply & fix Factory made single extruded WPC (Wood PolymComposite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
Supply & fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Material & labour 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with deco rative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed
Supply & fix 125 mm mild steel butt hinges, cold rolled medium weight all as specified and as directed.
Supply & fix 200 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed.
Supply & fix 150 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed.
Supply & fix 150 mm anodised aluminium handles cast type complete all as specified and as directed.
Supply & fix 150 mm Aluminum anodised barrel tower bolts of extruded section all as specified and as directed.
Supply & fix in repairs 200 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed.
Supply & fix in repairs 150 mm anodised aluminium handles cast type complete all as specified
Supply & fix in repairs 150 mm Aluminum anodised barrel tower bolts of extruded section all as specified and as directed.
Supply & fix in repairs 300 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed.
Supply & fix in repairs floor door stopper 150 mm size aluminium alloy body and tongue double legged, anodised fixed to door all as specified and as directed.
Supply & fix in repairs 100 mm mild steel butt hinges, cold rolled medium weight all as specified and as directed.
Supply & fix in repairs mild steel friction hinges suitable for window/ventilator shutters all as directed.
Supply & fix in repairs 100 mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed in repair Type B11 all as specified and as directed.
Supply & fix in repair 75 mm brass handles, cast type, polished, ornamental type for drawers, etc. all as specified and as directed.
Supply & fix in repairs 150 mm brass handles, cast type, polished, ornamental type for cupboards all as specified and as directed.
Supply & fix in repairs aluminium powder coated Ebco handles for sliding windows complete fixed all as per manufacturers instruction all as specified and as directed.
Supply & fix in repairs 75 mm hasp and staple mild steel safety type and fixed with screws all as specified and as directed.
Supply & fix aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed.
Supply & fix in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed.
Supply & fix in repairs rubber beading suitable size for safety purpose (snake guard) in bottom of door complete all as specified and as directed.
Supply & fix in repairs block board, grade 2 quality, interior grade, decorative type, both faces, 18/19mm thick as in cupboard, drawer repair & fixed with screws to timber frame work complete all as specified and as directed.
Supply & fix in repairs both sides prelaminated medium density fibre board exterior grade 18/19 mm thick as in cupboard, drawer repair & fixed with screws to timber frame work complete all as specified and as directed.
Supply & fix in repairs 0.9 to 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
Supply & fix stainless steel telescopic drawer channel double ball bearing complete fixed all as per manufacturers instructionsall as specified and as directed..(Make : Sleek by Asian paints)
Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and as directed.
Supply & fix sheet glass 4mm thick, ordinary quality and glazing withrubber beading/ oil putty area exc 0.5 sqm in each pane all as specified and as directed.
Material & labour 4mm thick sheet figured glass pin headed quality n exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repair including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc..all as specified and as directed.
Repairs to wooden shutter of any description exc 1 Sqm but n exc 2 Sqm each including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc..all as specified and as directed.
Taking down existing aluminium glazed window shutters of any description for repairing and refixing in the same opening after carrying out repair works all as specified and as directed. Note :- New materials required for replacement of old items shall be measured and paid seperately vide relevant items.
Supply & fix in repairs Mortice lock brass body, 100mm, 4 levers vertical type all as specified and as directed.
Supply & fix in repairs 20 mm bore curtain rods, anodised aluminium alloy, PVC coated with fixing brackets, stops, rollers etc all as specified and as directed.
Supply & fix in repairs aluminum (die cast) body door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg all as specified and as directed.
Supply & fix in repairs vitreous china, wash down water closet (EWC) white colour with PVC seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.
Supply & fix in repairs plastic water closet seat cover white colour closed pattern with flat bottom and cover and MSCP or aluminised hinging device all as specified and as directed.
Supply & fix in repairs vitreous China wash basin, white coloured, flat back 550x400mm including waste coupling CP, fixing brackets, cutting for and pinning in ends of brackets all as specified and as directed.
Supply & fix in repairs PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity all as specified and as directed.
Supply & fix in repairs 15mm bore chromium plated bib taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed for iron pipesall as specified and as directed.
Supply & fix in repairs 15mm dia bore pillar taps, cast copper alloy, fancy type capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed.
Supply & fix in repairs 15mm bore stop valves chromium plated cast copper alloy, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) aall as specified and as directed.
Supply & fix in repairs angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe, completeall as specified and as directed.
Supply & fix in repairs cast copper alloy, chromium plated toilet paper holder, complete all as specified and as directed.
Supply & fix in repairs chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed.
Supply & fix in repairs PVC flexible waste pipe 32/40mm dia and length of 600mm (min) for urinals/WHB/sink all as specified and as directed.
Supply & fix in repairs cast copper alloy, chromium plated towel ring 15 cm diaall as specified and as directed.
Supply & fix in repairs cast copper alloy, brass chromium plated towel rail, 600mm long complete all as specified and as directed.
Supply & fix in repairs 125mm size brass chromium plated shower rose complete all as specified and as directed.
Supply & fix in repairs waste coupling, brass, chromium plated with long shank, half thread, 32mm dia, for WHB/urinal etc. complete all as specified and as directed.
Supply & fix PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed.
Supply & fix for flora centre hole basin mixture including CP extension nipple as required complete all as specified and as directed. (Hindware F280009CP) Make :- Hindware, Parryware or Equivalent approved by GE
Supply & fix 15 mm bore sink cock swan neck (wall mount installation) type with chrome finish complete all as specified and as directed. (Hindware F280026CP) Make :- Hindware, Parryware or Equivalent approved by GE
Supply & fix for Bathroom plastic cabinet of size 0.45 x 0.55 x 0.12 mtr with mirror complete all as specified and as directed by Engr-in-charge. Make :- Nilkamal, Cello or Equivalent
Supply & fix repairs multi purpose glass corner shelf of size 300 x 300 mm, clear in color with stainles steel wall brackets and two grill bars, approved quality complete all as specified and as directed.
Supply & fix repairs wall mounted kitchen utensil dish rack, made of stainless steel, weight not less than 5 Kg, size 0.90m x 1.00m (Approx) of approved designe and make complete all as specified and as directed .
Taking up or down steel tubing and connectors 25-32mm bore in new or old position (wall, ceiling, floor etc.) all as specified and as directed.
Supply & fix 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including removal of existing pipe complete all as specified and as directed.
Supply & fix 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including removal of existing pipe completeall as specified and as directed.
Removal of air lockin internal water supply system of pipe of any dia all as specified and as directed.
Cleaning of water tank exc 250 & n.exc 500 lit, including cleaning all scales and dirts from inside of tank using bleaching powder and washed with water, complete all as specified including taking down and re-fixing of float valve. Including mentioning date of cleaning on water tank using white synthetic enamel paint as existing complete all as specified and as directed. Note :- After Cleaning of water tank, The rep of contractor should check during water supply time and ensure water is reaching to the qtr and float valve is working properly and no leakages are there at joints.
All as per srl item No. 95 but exc 500 & n. exc 1000 lit, complete all as specified and as directed.
Supply & fix in repairs PVC Lid/ cover for 500 lit to 1000 lit Capacity water tank , complete all as specified and as directed.
Supply & fix in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 40 mm dia pipes all as specified and as directed.
Taking down serviceable bib tap, angle cock, stop cock, heath fauset etc and cleaning , servicing ,putting washer etc and refixing on same pipe line pipelines
Taking down , repairing & refixing of builders hard ware items like handles, hinges, bolts, towerbolts, sliding bolt etc using necessary screws at the same position all as specified and as directed.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.
Material & labour for applying two coats of Smart care damp proof of Asian Paints or equivalent specification of Berger / OPUS / Shalimar / Janson & Nicholson / Good lass / Nerolac by roller/brush over a coat of primer with smart care damp proof 33 % dilution of Asian paints including preparation of existing WALL surface by complete removal of existing treatment by means of chipping the surface to remove loose particles and mortar and clean the surface with wire brush and water wash etc including filling & coving with smart care repair mortar (wherever required), filling of crack filler with smart care crack filler of Asian Paints (wherever required) complete all as per manufacturer’s instructions, all as specified and as directed by Engr-in-Charge. (Make : Asian Paints Smart care Damp proof).
Taking down serviceable wire mesh & refixing the same using nessary beadings, nails etc.all as specified and as directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.44 MB
BOQ_847413.xls
BOQ • 0.81 MB
Tender.pdf
Tender Documents • 1.08 MB
Download all tender documents and submit your bid