Construction of First Floor on existing office building for Rambaug sub division office at Adipur under Anjar Circle.

Name of work: Construction of First Floor on existing office building for Rambaug sub division

office at Adipur under Anjar Circle

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

1 Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Mortar. 61.00 557.32 Cmt

2 Demolition including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

(i) R.C.C. work 12.00 1071.63 Cmt

3 Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. 267.43 48.63 Smt

4 Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3 Sq.M. in area 19.00 190.19 Nos.

5 Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing 21.00 48.63 Smt

6 Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking

of serviceable material and disposal of unserviceable from

site of work with all lead and lift 21.00 19.69 Smt

7 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or

soft soil 6.00 121.72 Cmt

8 Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and disposing

of the excavated stuff upto 50M. Lead. (B)Dense or hard 12.00 155.77 Cmt

9 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

Hard Murrum 20.00 264.44 Cmt

10 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(D)

Soft rock not requiring Blasting 20.00 275.31 Cmt

11 Filling available excavated earth ( excluding rock ) in

trenches, plinth, sides of foundation etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering etc. complete. 34.20 135.56 Cmt

12 Filling in plinth with sand under floors including

watering ramming, consolidating and dressing complete 13.00 477.03 Cmt

13 Filling in foundation and plinth with murrum or selected

soil in layers of 20 Cm. thickness including watering

ramming and consolidating etc. complete. 60.00 267.08 Cmt

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

14 Providing and laying cement concrete 1:2:4 (1- Cement :2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth 24.00 3703.19 Cmt

15 Providing and laying controlled cement concrete M

and curing complete including the cost of form work and

excluding reinforcement for reinforced concrete work in

foundation footings, Base of columns and mass concrete. 6.00 5359.57 Cmt

16 Providing and laying controlled cement concrete M.250

and curing comp. Including the cost of form work and

excluding reinforcement for reinforced concrete work in

column, pillars posts and struts up to floor two level, - GF

column 6.00 8736.32 Cmt

17 Providing and laying controlled cement concrete M.250

and curing comp. Including the cost of form work and

excluding reinforcement for reinforced concrete work in

column, pillars posts and struts up to floor two level, -For

FF column 14.00 8776.85 Cmt

18 Providing & laying controlled concrete M-250 and

Finishing smooth with curing etc complete including the

cost of form work but excluding the cost of reinforcement

for reinforced concrete work in . -plinth beam,coping,

Lintel ,sill beam, chhajahs, beam etc. For GF 15.00 6806.30 Cmt

19 Providing & laying controlled concrete M-250 and

finishing smooth with curing etc complete including the

cost of form work but excluding the cost of reinforcement

for reinforced concrete work in . -plinth beam,coping,

Lintel ,sill beam, chhajahs, beam etc. for F.F. 40.00 6846.83 Cmt

20 Providing & laying controlled cement concrete M.250 with

curing etc completed including the cost of form work but

excluding the cost of reinforcement for R.C.C. Work in -

Slab, staircase etc. For GF 11.00 7181.58 Cmt

21 Providing & laying controlled cement concrete M.250 with

curing etc completed including the cost of form work but

excluding the cost of reinforcement for R.C.C. Work in -

Slab,staircase etc. For FF 46.00 7222.11 Smt

22 Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete - GF 4200.00 76.52 Kg

23 Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in position

complete -FF 11000.00 77.56 Kg

24 Precast concrete block masonry (including quoin blocks

jamb blocks closer etc.) with solid concrete blocks of

approved size made of cement concrete 1:3:6 mix (1-

Cement : 3 coarse sand: 6- graded stone aggregates of

mm and down grade) in foundation and plinth cement

morter 1:6 (1-Cement : 6- course sand) including packing

the joints etc. complete 9.00 3734.62 Cmt

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

25 Precast concrete block masonry (including quoin blocks

jamb blocks closer etc.) with solid concrete blocks of

approved size made of cement concrete 1:3:6 mix (1-

Cement : 3 coarse sand: 6- graded stone aggregates of

mm and down grade) in morter 1:6 (1-Cement : 6- course

sand) including packing the joints etc. complete for super

structure - GF 24.00 4013.55 Cmt

26 Precast concrete block masonry (including quoin blocks

jamb blocks closer etc.) with solid concrete blocks of

approved size made of cement concrete 1:3:6 mix (1-

Cement : 3 coarse sand: 6- graded stone aggregates of

mm and down grade) in for super structure for First floor

cement morter 1:6 (1-Cement : 6- course sand) including

packing the joints etc. complete -FF 74.00 4050.99 Cmt

27 Precast concrete block masonry in partition walls 10 cm.

thick with solid block of approved size (including quion

blocks Jamb blocks closer etc.) made of C.C.1:3:6 (1-

Cement : 3- coarse sand : 6 graded stone aggregates 20 mm

and down grade) (A) in C.M. 1:4 (1-Cement : 4- course

sand) including packing the joints etc. complete. 160.00 670.15 Smt

28 Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) - for GF 180.00 178.61 Smt

29 Providing 15 mm. Thick cement plaster in single coat on

both sides Brick/concrete walls for interior plastering up to

floor two level and finished even and smooth in C.M.1:3(1-

cement:3-sand) For FF 860.00 202.27 Smt

30 Providing 10mm thick cement plaster in single coat on

Brick/concrete walls for interior plastering level finished

even and smooth in Cement Mortar 1:3 (1-Cement :3-Sand)

- for ceiling GF 65.00 159.93 Smt

31 Providing 10 mm. Thick cement plaster in single coat on

all side Brick/concrete walls for interior plastering up to

floor two level and finished even and smooth in C.M.1:3 (1-

Cement :3-Sand) -For ceiling FF 320.00 181.60 Smt

32 20 mm. Thick sand faced cement plaster on walls up to

height 10 meters above ground level consisting of 12 mm.

Thick backing coat of C.M. 1:3 (1 cement : 3 sand) and

mm. Thick finishing coat of C.M.. 1:1 (1 cement : 1 sand)

etc. complete. 670.00 312.56 Smt

33 Applying two coats of Birla or Asian acrylic lapy (putty)

& two coats of primer of approved brand and Wall

painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth - Wall. 1040.00 123.72 Smt

34 Applying two coats of Birla or Asian acrylic lapy ( putty)

& two coats of primer of approved brand and Wall

painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.-for ceiling 385.00 129.19 Smt

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

35 Applying One coat of exterior primer of approved brand

and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth. 1050.00 34.66 Smt

36 Finishing wall with weather proof exterior emulsion Apex

paint on wall surface( Two coats) to give an required shed

even shed after throughly brushing the surface to remove

all dirtand remains of loose powder materials etc compete 1050.00 119.07 Smt

37 Providing cement vata 10 x10 cm size quarter round in

cement concrete in C.M. 1:1 including neat cement

finishing watering etc. complete. 100.00 24.04 Rmt.

38 Providing and laying broken chine mosaic flooring for

terrace using 12mm to 20mm broken piece of glazed tiles

to be laid over cement mortar 1:3 to plain or slop and to be

tempered to bring mortar crème out upto surface using

white cement including rounding off junctions and

extending them upto 15 Cm along the wall, ceiling with

water and oxalic acid etc. as directed. 366.00 771.98 Smt

39 Providing and laying 24''x24'' Vitrified 8 mm thick double

chat tiles in flooring & skirting over 20 mm base of

cement mortar 1:6 on new surface or fixing on existing

flooring by adhesive material including dismentalling of

existing flooring and jointed with colour cement slurry incl.

finished with flush pointing and cleaning the surface etc.

complete for Light/dark shade using coloured cement. 335.00 1461.92 Smt

40 Providing and Laying coloured digital glazed tiles of he

size 300mm x 200mm x 8mm / 300mm x 450mm x 8mm or

larger size as selected by EIC in skirting, risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-sand)

& jointed with white cement slurry. 183.00 1473.50 Smt

41 Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A)

25mm thick 22.00 1003.83 Smt

42 Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or fixing in sill Jamb laid and jointed with gray

cement slurry or bonding chemical including rubbing and

polishing complete as directed by EIC. (A) Marble slab

25mm thick 92.00 2173.03 Smt

43 Providing & laying 20 to 25mm thick, both faces polished

kotah stone with all edges machine cut up to 600 or

450mm width and of required length (only one piece to be

used ) of approved quality for cupboard shelves including

fixing the same in masonry wall by cement mortar in

three sides including curing etc. complete as directed by

44 Labour Charges Quarter round edge nosing for

Kota/Marble 550.00 39.10 Rmt.

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

45 Providing , Fixing & Fitting fully glazed, partly glazed

Single/Double leaf anodized /aluminum powder coted(of

approved shade) door using extruded section fabricated by

standard manufacturers with framing 63.50 x 38.10 having

wt 1.094 Kg pre Rmt rectangular section & door shutter

made from with frame vertical size 44.45 x 47.62mm

having wt 1.505 Kg per Rmt and horizontal size 63.50 x

38.10mm and bottom rail size 101.60mm 44.45mm having

wt 1.60 Kg/M using 5 mm thick “TRIVENI” or HB4

plain/colour glass/4 Acrylic Sheets/ 12 mm Board with

glazing deep rubber gasket with locking arrangement of

GODREJ LOCK with all fixtures & fastening of anodized

section with aluminum beeding without floor mounted door

closer etc. completed.. Rates are with all labours and

material as per drawing and as directed. 15.00 4116.00 Smt

46 Providing, & fixing hot pressed phenol bonded, exterior

type solid flush door 30mm shutter made by approved

brand & as per I.S.I. standard with water resisting plywood

facing and 1mm thick laminated sheet on both side of door

& teak wood leaping all-round including 100X75mm. teak

wood frame.If necessary with glass looking window with

T.W. batten and polishing /Colour .Rates are without

fixtures & fastening but with 3 NO of 100mm. long butt or

parliamentary hinges on each flap of double shutter &

150mm. long hinges for single shutter and 3 NO of M.S.

flat hold fast grouted in C.C. (1:2:4) on each side of frame,

3 coats of oil painting of approved shades make etc.,

complete as per drawing & as directed by E.I.C.

47 Providing and fixing FRP of 28mm thick Fibre Glass

shutter with 1.5 to 2.0 mm thick fire retardent grade FRP

skin in depressed panel design having extra reinforcement

on sides & edges & in Gel coat finish. The core of the

shutter is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water

proof ,weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium S.S fixtures & fastenings

& fastener sleeve. 13.00 1544.88 Smt

48 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window. 74.00 1696.73 Smt

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

49 Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/mt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

50 Providing & fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

spacing and frame all-round square or round bars with

round headed bolts and nuts or by screws. (a) Plain grill 1000.00 113.00 Kg

51 Providing & fixing anodized aluminum partition having

style & rail 63.5x38.10 of Jindal Section no @ Wt

gm/Rft)Partly penneled and partly glazed with 5 mm thick

glass including fitting on wall or at opening complete with

rubber on all four side for air tight fitting incl. all fixtures

& fastenings as directed by E.I.C. 34.00 3010.36 Smt

52 Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all 25.00 71.93 Rmt.

53 As per above item but-25mm dia. 80.00 90.93 Rmt.

54 As per above item but-32mm dia. 30.00 117.97 Rmt.

55 Providing erecting and fixing double coated ISI water tank

of required capacity each with all necessary fittings and

connection etc. complete on terrace 3000.00 3.91 Nos.

56 Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution &

all fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope includes all type earth

work up to 750 mm depth .……-75mm Dia. 30.00 169.66 Rmt.

57 Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution &

all fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope includes all type earth

work up to 750 mm depth .……-90mm Dia. 20.00 220.59 Rmt.

58 Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution &

all fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope includes all type earth

work up to 750 mm depth .……-110mm Dia. 100.00 313.74 Rmt.

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

59 Providing & fixing to wall, ceilling, and floor in plumb by

means of GI clamps of 18 gauge sheet with 1 to 1.5 mtrs.

Distance 6.00 Kg. /cm2 working pressure polythene pipes

of approved brand incl. joining with approved solution &

all fittings like bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope includes all type earth

work up to 750 mm depth .……-160mm Dia. 50.00 543.51 Rmt.

60 Providing and fixing wash down closet (European W.C.

Pan) with integral "P" or "S" trap and PVC flushing tank

cistern with fittings and incl. plastic sheet cover and PVC

connector etc. including jointing trap with pipe in C.M.

1:1and connecting cistern with closet etc., comp.-Vitreous

in colour. 6.00 3706.75 Nos.

61 Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware 550mm

62 Providing and fixing wash basin with single hole for pillar

tap with C.I. or M.S. Brackets painted white including

sutting holes and making good the same including C.P.

brass waste and waste Pipes - vitreous china.-Flat back

washbasin 550 x 400 mm. Size - in colour. 6.00 1653.35 Nos.

63 Providing & fixing Cast iron (spun) nahni trap of the

following nominal dia. of self cleaning design with C.I

screwed down or hinged grating including cost of cutting

making good the walls & floor 100 mm inlet and 50mm

outlet.(C) 100mm dia. 14.00 630.08 Nos.

64 Providing and fixing screw down bib taps of following

size.(B) Brass chromium plated screws down Bib Tap. (ii)

20mm dia. 6.00 212.68 Nos.

65 Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts (ii) 20mm

dia 6.00 351.18 Nos.

66 Providing and fixing ISI quality heavy gun metal check or

non return valve full way wheel valve - 25MM diameter. 6.00 416.47 Nos.

67 Providing and fixing 600 x 450mm bevelled edge mirror of

superior glass mounted on 6 mm thick A.C. Sheet or

plywood sheet or PVC framing and fixed to wooden plugs

with C.P. brass screw and washers. 3.00 850.90 Nos.

68 Providing fixing Hydraulic Door closer and of ISI

approved brand as directed. 12.00 925.75 Nos.

69 Providing and fixing C.P. brass towel rail complete with

C.P. Brass brackets fixed to wooden plugs with C.P. Brass

screws.-600 X20 mm size. 6.00 610.32 Nos.

70 Flat latch (Brass) 300 mm long. 2.00 245.00 Nos.

71 Handle (Brass) 150 mm long. 2.00 100.00 Nos.

72 Door stopper 150 mm long (Brass). 2.00 90.00 Nos.

73 Tower Bolt 150 mm long (Brass) 2.00 100.00 Nos.

74 Aldrop 300 mm long &16 mm Dia.(Brass) 3.00 425.00 Nos.

75 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M.

size having weight not less than 35Kg. 5.00 948.68 Nos.

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

76 Providing B.B. Masonry inspection chamber (MANHOLE)

of approved size including light type C.I. Cover with

frame, necessary excavation bottom concreting of .C.C.

(1:3:6) 150mm. thick/ 225mm. thick B.B. Masonry in

C.M.(1:6) 12mm thick cement plaster in C.M.(1:3) inside

& to all exposed faces up to 300mm. below ground level,

curing etc., including disposal off surplus excavated earth

up to radius of 300 mt. including 3 coats of white or colour

wash to all exposed finished surface etc. complete as

directed by E.I.C., with free supply of cement by the Board

(B.B.MASONRY UPTO 1000mm. DEPTH.)--

300X300mm clear size 3.00 3569.79 Nos.

77 Providing B.B. Masonry inspection chamber (MANHOLE)

of approved size including light type C.I. Cover with

frame, necessary excavation bottom concreting of .C.C.

(1:3:6) 150mm. thick/ 225mm. thick B.B. Masonry in

C.M.(1:6) 12mm thick cement plaster in C.M.(1:3) inside

& to all exposed faces up to 300mm. below ground level,

curing etc., including disposal off surplus excavated earth

up to radius of 300 mt. including 3 coats of white or colour

wash to all exposed finished surface etc. complete as

directed by E.I.C., with free supply of cement by the Board

(B.B.MASONRY UPTO 1000mm. DEPTH.)--600x450mm

clear size 3.00 5198.63 Nos.

78 Providing 2500mm internal diameter & 3.0 Mt. Deep soak

pit including excavation in all types of soil & soft rock &

B.B CC(1:4:8) bedding, 300mm thick below masonry and

450mm thick B.B Masonry in CM(1:6) up to 600mm

height, 350mm thick for further 600mm and 230mm thick

for remaining height honey combed, plastering in CM(1:3)

outside up to 1.5 Mt height and 100mm thick RCC slab

with 600x600mm C.I.HEAVY duty cover with frame, with

necessary reinforcement as per design & C.I Vent pipe

1800mm long with B.B masonry pillar 350x350x450

plastered all around filling with 40 to 50mm size brick bats

up to 1.5 Mt depth, including 16mm dia M.S’U’ shape

steps, refilling including disposal of the surplus excavated

earth up to the lead of 500mt. Radius including 3 coats of

white or colour wash to all exposed finished surface etc.

complete as directed by E.I.C. 1.00 49139.00 Nos.

79 Providing & fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm. Braced with flat

iron diagonals 20 x 5 mm. Size with top and bottom rails of

T-Iron 40 x 40 x 6 mm. With 38 mm. Dia steel pulleys,

complete with bolts, nuts, locking arrangements, stoppers,

handles including applying a priming coat of Red lead

paint and 2 coats of oil paint as directed by EIC. 200.00 100.00 Kg

80 Providing and fixing cupboards door using 18MM

plywood at backside laminate of approved shade for all

sides and inside white laminate including materials such as

beading strips, handles, magnets, adhesive having good

quality of locking arrangements including labour complete

in all respect as directed by EIC. 17.00 4702.73 Smt

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

81 Providing and fixing steel cupboard shutter of 20 gauge

with steel frame & fixing the frame with brick masonary

including locking arrangement with 1 coat of primer ( red

oxide ) i.e asian, dulux or its equivalent and 3 coats of

approved oil paint i.e asian, dulux or its equivalent etc.

complete as per requirement and instruction of EIC. 171.00 3668.00 Smt

82 Providing and fixing single layer water proof gypsum board

12.5 mm thick sections using water proof board of size

1220 mm x 1830 mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with intermediate channel

og size 18 mm x 40 mm x 0.8 mm

at 1220 mm center to center ceiling section of size 40 mm

x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel

A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges &

drops incl.paper tap sand sofit cleat, anchor fastener, scoch

bolt connecting cleat,joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc.

comp. as per detail drawing as directed by EIC. 18.00 600.94 Smt

83 Providing and fixing curtain made up of 50% cotton and

50% polyster mixed cloths with chully at the back 4" pleat

double belt at the bottom with 1" dia MS steel coated pipe

with end socket,the curtain should have proper overlap

with window on sides were feasible with 2" dia steel ring

on canvas putta with all labour material any other

consumable transportation etc.completed as directed. 24.00 1400.00 Smt

84 Providing and fixing 50mm stainless steel Grade 304 pipe

hand railing for staircase with necessaary blausters vertical

pipe of required diameter fixing the same by airldite

necessary welding etc as directed by EIC 10.00 1316.00 Rmt.

85 Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like 1460.00 95.18 Kg

86 Providing corrugated G.I. Sheets Class-3 roofing fixed with

Galvanied iron 'J' or 'L' hooks bolts and nuts 8 mm.

diameter with bitumen and G.I.L impet washers filled with

white lead complete excluding the cost of purlins, raffers

and trusses. (I) 0.50 mm. Thick sheet 60.00 656.00 Smt

87 Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement :3fine sand)

etc complete. 30.00 396.90 Rmt.

88 Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete. 288.00 699.93 Smt

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

89 Providing and fixing Stainless Steel text i.e. “P” in 33"

Logo and “PGVCL”in 6" text below logo, with " Khavda

પેટા િવભાગીય કચેર " In 15" text in approved steel grade

SS 304 with redium nikkalite as per requirement, including

all fastners and fixtures at give location as directed by EIC. 32.00 1058.00 Sft

Estimated Cost Sectoin-I (CIVIL WORKS) in Rs.

90 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5

sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in below type of

pipe erected with 6A Tissino Type ISI marked flush type

switch / bell push and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete 150.00 351 Pt

91 Point wiring for independent PLUG with following size

mains earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of pipe

erected complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection

erected on Metal / PVC/Wooden box covered with 3 mm

thick PC(Polycarbonate) / Acrylic/Laminated sheet. (a)

with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 78.00 310 Pt

92 Point wiring for independent PLUG with following size

mains earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of pipe

erected complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection

erected on Metal / PVC/Wooden box covered with 3 mm

thick PC(Polycarbonate) / Acrylic/Laminated sheet.[B]

6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu.

Mains from mcb d b boards.(a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling

complete 10.00 585 Pt

93 Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

SIZE =(A) 20 mm Diameter 600.00 24 Mtr

94 Providing & Erecting following Shockproof tissino type

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal/Wooden Box. erected on wall/

ceiling. (6) One no Single pole 16 A Switch & One no

6A/16A Universal Socket combined with indicator & fuse 10.00 124 Ea.

95 Providing & Erecting following Shockproof tissino type

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal/Wooden Box. erected on wall/

ceiling. (8) Bakelite lamp holder 56.00 22 Ea.

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

96 Providing & erecting Switch board for Computer or

electric apparatus consisting of following items in single

board erected on PVC / Metal/Wooden board

concealed/open with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed 1 no. 6A/16A universal

plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin

Plug For Tissino Type Accessories 25.00 329 Ea.

97 Supplying & erecting Approved make call bell indicator

with buzzing sound and Red light indicating lamp with Red

light button to attend the call suitable for 240 v 50 c/s

supply to be erected. 1.00 147 Ea.

98 Approved make C.F.L. Retrofit 13/15/18 Watt erected if

required Cat.III 36.00 136 Ea.

99 Providing Approved make Triple Pole Metal Clad Switch

Fuse Unit 415/500 V. with HRC fuse of suitable load and

neutral link confirming to IS.(a) 32A Cat.III 2.00 2085 Ea.

100 Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box

having following capacity (A) 6 to 32 Amp Cat III, Make:

101 Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat III, Make : L&T 1.00 276 Ea.

102 Providing & erecting 415V MCB Four Pole Switch for

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat. III, Make: L&T 15.00 573 Ea.

103 Providing and erecting Three pole Miniature isolator A.C.

22 duty confirms to IS 13947-3 in existing box. (a) for

Amp. Cat.III 1.00 467 Ea.

104 Approved make ELCBs / RCCBs confirming to IS :12640

and having sensitivity of 30 mA and Short circuit withstand

capacity of 6 KA and suitable for operation on single phase

240 V having charectorstic of quick action & tripping with

all advance feature & not incorporate any electronic

component for following Max. rating. Make: L&T

105 Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge)) Make: Crompton

greaves 20.00 1878 Ea.

106 Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing. 20.00 107 Ea.

107 Providing 2.5mm.thick laminated acrylic sheet to cover the

fan hook or Fan box. 20.00 18 Ea.

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

108 Earthing Electrode with ISO Quality certification, dule

pipe with flat technology consist of 3 Mtr long, 76-80 mm

Outer dia. Pipe, 3mm thick and 37-40 mm inner dia. pipe -

2mm thick having terminal flat of 12mm.The entire

construction processed with hot dip galvanization, outer

surface up to 100 micron and all inner surfaces 200 to

micron. All inner annular space filled with highly

conductive and corrosive nature crystalline material along

with backfilling compound of 2 X 25 kg bags to fill

surround the electrode at the time of installation. Earthing

backfilling compound must have properties of moisture

retention, conducting and non corrosive nature. Necessary

boring and digging at site is to be carried out by the agency. 2.00 20000 Nos.

109 Supplying & erecting approved make HFHC Electronic

ballast having operation voltage range 120V to 300V at

0.95 power factor for (a) One No. 20/40 watt tube light

Philips with all acessories Cat.III 50.00 306 Ea.

110 Repairing of existing indoor LED light fixture(tube

light/panel light/spot light/strip light/decorative wall lights

etc as per sample )by suitable driver 2 kv according to

LED PCB as per requirement of following rating wattage

capacity . Make: Philips with all acessories (D) 16-24 watt

capacity 25.00 374 Ea.

111 Providing and ercting of CAT-6 cable for LAN for each

computer as directed by Deputy Engineer with all

accessories by push pull method. Make of cable: D-Link 350.00 50 Mtr

112 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) Make: Philips (A)

Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(ii) above 48 to 60 Watts Cat-lll

113 Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt

lowers & square frame 6.00 1687.00 Nos.

114 Providing and erecting of Ditribution box (fuse box) with

MCCB-ELCB for distributing power. Make: L&T 2.00 2256 Nos.

115 Provindg of Eathernet switch 24 port, Make - D Link for

Lan wiring 2.00 4000 Nos.

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

116 Providing and ercting of CAT-6 cable for LAN for each

CCTV camerra as directed by Deputy Engineer (Maliya)

with all accessories by push pull method. Make of cable: D-

Link 528.00 45 Mtr

Estimated Cost Sectoin-II (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ A = I +II ] in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- AxB ]

GRAND TOTAL [C = A +/- AxB ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot