CWEK-71/2020-21

Amount

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all specified and directed.

M & L for 100mm thick cement concrete type D-2 1:4:8 ( using 40mm graded aggregate) as in sub base of flooring/hard standing complete all as specified and directed.

M & L for 100mm thick cement concrete 1:2:4 type B-1, (using 20mm graded aggregate) as in flooring complete all as specified and directed.

M & L for forming Contraction (Dummy) joints 100mm deep x 10mm wide, filled with sealing compound, Grade `A`, complete all as specified and directed.

Demolition of Brickwork or stone masonary built in cement mortar including all quioins, arches, pillars etc complete all as specified and directed.

M & L for stone masonary walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

All as per Srl Item 10 here-in-before above but except Stone.

M & L for providing cement concrete 1:2:4 Type B-0 (using 12.5mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth, string, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use of form work complete all as specified and directed.

M & L for hammer dressing in granite or trap stone, not exceeding 40mm, with maximum depression from a straight edge held against the surface complete all as specified and directed.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed and as directed.

M & L for rendering 15mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work or cement concrete surfaces including finishing the surface even and fair without using extra cement including water proofing compound @ 3% of weight of cement complete all as specified and directed. Note : Water proofing compound shall be paid separatly.

M & L for preparation old or previously untreated steel or iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint,over one coat of primer complete all as specified.

M & L TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to grade Fe-500, complete all as specified and directed.

M & L for mild steel round bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to to grade Fe-500, complete all as specified and directed.

M & L for RCC 1:2:4 Type B-0 (using 20mm graded aggregate) as in gable/roof band upto 1.5m span including necessary form work complete all as specified and directed.

M & L for Mild steel work as in wind ties for roof including securing bolts etc. including all necessary drilling, holes, nothcing for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling ,bolting or riveting etc and similar work, conforming to Fe-290 grade-E-165, complete all as specified and directed.

M & L of CM 1:4 for raised pointing to random or polygonal rubble,uncoursed or brought upto courses, complete all as specified and directed.

M & L for rendering 10 mm thick in cement and sand mortar 1:6 on stone masonry surfaces or surface other than fair face of brick work or cement concrete surfaces including finishing the surface even and fair without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Preparation of newly plastered or concrete surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls floors, etc., complete all as specified and directed.

M & L for Point wiring in colour code with 1.5 Sqmm (7/0.53) single core multi-stranded copper conductor FRLS (multistrand) PVC insulated and un-sheathed heavy duty cable in and including PVC rigid concealed conduits 2.0mm wall thickness, ISI marked not less than 20mm dia with all fittings/accessories terminated into cast iron/pressed steel terminal boxes, joint boxes, other boxes made from 1.2mm thick MS sheet of suitable size for mounting switches, sockets, fan regulators, light fittings etc., on 3mm thick hylam brand IS-2036 laminated sheet top cover and also including PVC insulated 1.5 Sqmm copper stranded conductor as earth wire (green colour) connected to common earth dolly complete all as specified and directed.

M & L for All as per Srl item No. 27.00 here-in-before above but one light/fan/bell point controlled by one 5 Amps switch one way switch complete all as specified and directed.

M & L for All as per Srl item No. 27.00 here-in-before above but for 3 pin, 5 Amp socket outlet on independent board complete all as specified and directed.

M & L for All as per Srl item No. 27.00 here-in-before above but for 3 pin, 5 Amp socket outlet on same board with other switch complete all as specified and directed.

M & L for Point wiring in colour code with 2.5 Sqmm (7/0.67) single core stranded copper conductor FRLS (multistrand) PVC insulated and un sheathed heavy duty cable in and including PVC rigid concealed conduits 2.0mm wall thickness, ISI marked not less than 20mm dia with all fittings/accessories terminated into cast iron/pressed steel terminal boxes, joint boxes, other boxes made from 1.2mm thick MS sheet of suitable size for mounting switches, sockets, fan regulators, light fittings etc. on 3mm thick hylam brand IS-2036 laminated sheet top cover, and also including PVC insulated 1.5 Sqmm copper stranded conductor as earth wire (green colour) connected to common earth dolly for one Three pin socket outlet 15Amp Independent , complete all as specified and directed.

S & F for Switch piano, flush type, Single pole, One way, 6 Amp complete all as specified and directed.

S & F for Switch piano, flush type, Single pole, One way, 16 Amp complete all as specified and directed.

S & F Socket outlet, 2 in 1, 3 pin, 5 Amp flush type,complete all as specified and directed.

S & F for Socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type , complete all as specified and directed.

S & F for ceiling rose, surface bakelite, 65x50mm, two to three terminals, complete all as specified and directed.

S & F for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

S & F for sheet metal enclosure, factory made for DBs, double door when MCB's to be used, single pole & neutral, 240 volts, 12 way, complete all as specified and directed.

S & F for MCB, single pole, 6 to 32 Amp, AC, 240 Volt, B Curve complete all as specified.

S & F for MCB, double pole, 40 Amp, AC, 415 Volt, C Curve complete all as specified.

S & F for LED lamp 15W 240 volts, complete all as specified.

S & F for Ultra modern,energy saving ,surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10W LED, complete all as specified.

S & F for MCB, ENDURA linear leo surface and mounted LED tube light fitting 20 W, four feet, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integerated electronic drivers complete all as specified and directed.

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 2 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep in any type of soil for laying of underground cable, foundation of poles & stays etc., and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified.

Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed

M & L for earthing complete with galvanised steel earth plate electrode 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate,with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4,funnel with wire gauge of (0.68) 8 mesh per liner inch,80mm thick RCC pit cover 320 mmx320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM,JALLI and charcoal dust and common salt all as shown in electrical plate No.5 of MES SSR Part-1 and specified including provision of earth wire protected by 40 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore medium graded GI pipe,and including all excavation and earth work & connecting the earthing to an earthing test point /transformer neutral/body/LT panel etc.and testing on completeion complete all as specified and directed.

M/S MUKHTAR CONSTRUCTION CO

QAZI SONS

M/S ESS EMM ENTERPRISES

M/S GHULAM NABI KHUROO AND CO

M/S MANZOOR AHMAD YATOO

M/S RASHID CONSTRUCTION

SOFI CONSTRUCTIONS