Renovation of 3.4 MGD Filtration Plant at Drung by way of Electro/ Mechanical Works and regulatory system under JKIDFC

Amount

Providing fixing of mechanical equipment required for bleaching tank with electrically driven paddle assembly fitted with suitable reduction gear mechanism coupled with 3 Phase electric motor 2Hp capacity Kirloskar/Crompton Greaves make alongwith providing fixing of 50mm dia PVC pipe and pipe fitting into clear water chamber inlet water arrangement from backwash tank by way of P/F of 25mm dia GI pipes with necessary pipe specials with Gate Valves of reputed make (Complete job.)

Providing, fabrication and fixing of main control board made out of Angle Iron frame fixed with 19mm ply board with Summica fitted with required electrical appliances viz 200Amp changeover, 100Amp, Changeover for dislodge bridge, 100Amp Bus Bar, 200Amp MCCB, Digital voltmeter, Amp meters (100Amp), Indicators, Oil immersed starters (Star Delta) 7.5Hp and 5Hp capacity including necessary wiring complete job. for filtration plant

Providing and fixing of panel board for Angle Iron frame 50x50x6mm thick angle size and vertical posts fixed with 19mm plyboard with Sunmica fitted with required electric appliances viz 100Amp MCCB, Star Delta Oil Immersed Starters 40Hp and 20Hp capacity, Digital voltmeter, Ammeter (100Amp). The job also includes providing and fixing of 03 No. Indicators, testing and commissioning (complete job) for Clarifloculator

Supply, installation, testing and successful commissioning of Monoblock pumping unit of Kirloskar/ Crompton greaves make with 3-Phase induction motor 15.00HP with dynamic head of 20m coupled with pumping unit having required discharge alongwith all necessary accessories like Non Return Vale, Foot vales, cement concrete block, base plate, suction pipe of required dia with heavy duty pipe specials (complete job)

Supply, installation and successful commissioning of Monoblock Pumping Unit Kirloskar/Crompton greaves make with 3-phase inductor motor 15.00Hp with dynamic head of 20m coupled with Pumping Unit of 25000gallons discharge per hour alongwith all accessories like Foot Valve, Non Return Valve, Cement concrete block, base plat, suction pipe of 100mm dia and heavy duty Gate Valve for fitting of suction and the pipe specials all complete including all sorts of carriage upto site of work.

i. Providing, installation and fixing in position including testing and commissioning of twin lobe rotary Air Blower of Everest make capable of providing compression @ 17.0 cum per minute (595 CFM) providing 0.35kg/cm working pressure with 3-phase electric motor of 20.00Hp capacity of Kirloskar/ Crompton Greaves make connected with the auxiliary pipe system of 150mm dia GI flanged and 65mm dia GI flanged upto filter beds (06 Nos.) ii. Fitting, pressure guage, nozzles, cement concrete block, base plate, air check valve, belt guard Non Return Valve - 06 No. Sluice Valve of 150mm dia 05 Nos. 150mm dia equal tees, 5 Nos., 150mm dia GI bend – 04 Nos., 150x75mm GI flanged Reducer Socket (06 Nos.) complete, 65mm dia Elbow (06 Nos.) 65mm dia Equal Tee (06 Nos.) 65mm dia Flange Joints (12 Nos.) 65mm dia Nipple 6” long (12 Nos.) excluding cost of pipes and 150mm dia sluice valves including all sorts of carriages upto the site of work.

Providing and installation of main cable from LT pole to main panel board 3.5core.

Providing and fixing of electrical points (heating and lighting) including cost of wiring, switches, necessary MCBs, Switch Boards, Ceiling Roses reputed make ISI mark, screws, casing/conduit materials including all sorts of carriage and labour charges, required for the job.

i) Lighting points

ii) Heating points

Providing and fixing of main cable 7/18 from Control Board to Air blower and other motors.

Providing and installation of street lights of 50Watt capacity standard quality (Havell make) including testing and commissioning. Complete job

i) 50Watt

ii) 30Watt

Providing, laying and fixing of PVC under drainage pipe system of 75mm dia (10kg/cm2) of Prince make for filter beds including testing, commissioning and all sorts of carriages upto the site of work. The job also includes making of designed perforation holes of required size.

75mm dia PVC pipe (10kg/cm2)

75x75x75mm PVC Tees (10kg/cm2)

75mm dia PVC End caps (10kg/cm2)

Revamping of damaged rotary de-sludge bridge by way of providing and fixing of damaged Angle Iron frame of 50x50x6mm Angle, MS blades for scrappers – 6mm thick; fixing of Angle Iron frame of 50x50x6mm size; repairs to MS rail by way of Electro – welding, make the rail smooth by way of mechanical filing in order to make the de-sludge bridge for smooth running. The job includes providing fixing of 5.00Hp 3phase induction motor with Radicon reduction gear system (1:70) horizontal type. The job also includes cost of couplings; chain and repairs to two No. sproctor including cost of current conductor and applying of steel primer and two or more coats of anticorrosive Black Japan paint including testing and successful commissioning (complete job)

Providing, fixing testing and commissioning of driver assembly unit for Churners of floculator with 3Phase Induction motor 2.00Hp capacity with RADDICON Reduction gear system fixed on base/with base plate complete.

Providing and fixing, testing and successful commissioning of Oil Immersed Automatic voltage stabilizer capacity 50KVA reputed make ISI mark with copper coils housed in MS Tank/box fitted with all necessary voltage dials/meters etc including copper connecting points mounted ion Bakelite/Asbestos plate filled with Oil, fitted with wheels for easy movement including necessary fittings including all carriages upto site of work. Complete job.

Manufacturing, providing and fixing at site 200mm dia MS Drum made out of 6mm thick MS plate 1.52 mtr long including providing and fixing of flanged nipples/connections for intake/supply mains including welding etc and applying a priming coat of red lead paint and painting with two or more coats of synthetic enamel paint, including all lead and lifts complete job.

Providing/fixing and successful testing commissioning of double flanged non rising spindly with hand wheel C.I Sluice valve ISI make of Kirloskar made heavy duty of PNI rating (male/female) with R.I. cloth nuts, bolts includes all carriages upto site of work, cost of lead spun yarn, earth work excavating, carriage complete job of following dia.

150mm dia

250mm dia

Fixing installation successful testing and commissioning of flanged type DI Sluice valve of 350mm dia size. The job includes cost of 350mm dia MS flanges – 10mm thick, cost of nuts bolts of required size. RI cloth. The job also includes all sorts of carriages upto the site of filtration plant premises and from dumping site to actual site of work i.e. inside pipe gallery by way of manual labours (all complete).350mm dia sluice valve ( 350mm dia Procurred under Aug. Pattan )

The unservicebale material viz Air, blower, Pannel board Churn ers, control board , electric motor, damaged stablizer, reduction gear , indiction motor ( Monoblock pumping unit )inductor motor inclduing defunct sluice valves etc to be returned to divisional store complete Job

CITY BUILDERS

M/s B.M.C GROUP OF ENGINEERS